1. 17 10月, 2012 7 次提交
  2. 16 10月, 2012 1 次提交
  3. 15 10月, 2012 4 次提交
    • R
      ARM: fix oops on initial entry to userspace with Thumb2 kernels · 68687c84
      Russell King 提交于
      Daniel Mack reports an oops at boot with the latest kernels:
      
        Internal error: Oops - undefined instruction: 0 [#1] SMP THUMB2
        Modules linked in:
        CPU: 0    Not tainted  (3.6.0-11057-g584df1d #145)
        PC is at cpsw_probe+0x45a/0x9ac
        LR is at trace_hardirqs_on_caller+0x8f/0xfc
        pc : [<c03493de>]    lr : [<c005e81f>]    psr: 60000113
        sp : cf055fb0  ip : 00000000  fp : 00000000
        r10: 00000000  r9 : 00000000  r8 : 00000000
        r7 : 00000000  r6 : 00000000  r5 : c0344555  r4 : 00000000
        r3 : cf057a40  r2 : 00000000  r1 : 00000001  r0 : 00000000
        Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM Segment user
        Control: 50c5387d  Table: 8f3f4019  DAC: 00000015
        Process init (pid: 1, stack limit = 0xcf054240)
        Stack: (0xcf055fb0 to 0xcf056000)
        5fa0:                                     00000001 00000000 00000000 00000000
        5fc0: cf055fb0 c000d1a8 00000000 00000000 00000000 00000000 00000000 00000000
        5fe0: 00000000 be9b3f10 00000000 b6f6add0 00000010 00000000 aaaabfaf a8babbaa
      
      The analysis of this is as follows.  In init/main.c, we issue:
      
      	kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
      
      This creates a new thread, which falls through to the ret_from_fork
      assembly, with r4 set NULL and r5 set to kernel_init.  You can see
      this in your oops dump register set - r5 is 0xc0344555, which is the
      address of kernel_init plus 1 which marks the function as Thumb code.
      
      Now, let's look at this code a little closer - this is what the
      disassembly looks like:
      
        c000d180 <ret_from_fork>:
        c000d180:       f03a fe08       bl      c0047d94 <schedule_tail>
        c000d184:       2d00            cmp     r5, #0
        c000d186:       bf1e            ittt    ne
        c000d188:       4620            movne   r0, r4
        c000d18a:       46fe            movne   lr, pc <-- XXXXXXX
        c000d18c:       46af            movne   pc, r5
        c000d18e:       46e9            mov     r9, sp
        c000d190:       ea4f 3959       mov.w   r9, r9, lsr #13
        c000d194:       ea4f 3949       mov.w   r9, r9, lsl #13
        c000d198:       e7c8            b.n     c000d12c <ret_to_user>
        c000d19a:       bf00            nop
        c000d19c:       f3af 8000       nop.w
      
      This code was introduced in 9fff2fa0 (arm: switch to saner
      kernel_execve() semantics).  I have marked one instruction, and it's
      the significant one - I'll come back to that later.
      
      Eventually, having had a successful call to kernel_execve(), kernel_init()
      returns zero.
      
      In returning, it uses the value in 'lr' which was set by the instruction
      I marked above.  Unfortunately, this causes lr to contain 0xc000d18e -
      an even address.  This switches the ISA to ARM on return but with a non
      word aligned PC value.
      
      So, what do we end up executing?  Well, not the instructions above - yes
      the opcodes, but they don't mean the same thing in ARM mode.  In ARM mode,
      it looks like this instead:
      
        c000d18c:       46e946af        strbtmi r4, [r9], pc, lsr #13
        c000d190:       3959ea4f        ldmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^
        c000d194:       3949ea4f        stmdbcc r9, {r0, r1, r2, r3, r6, r9, fp, sp, lr, pc}^
        c000d198:       bf00e7c8        svclt   0x0000e7c8
        c000d19c:       8000f3af        andhi   pc, r0, pc, lsr #7
        c000d1a0:       e88db092        stm     sp, {r1, r4, r7, ip, sp, pc}
        c000d1a4:       46e81fff                        ; <UNDEFINED> instruction: 0x46e81fff
        c000d1a8:       8a00f3ef        bhi     0xc004a16c
        c000d1ac:       0a0cf08a        beq     0xc03493dc
      
      I have included more above, because it's relevant.  The PSR flags which
      we can see in the oops dump are nZCv, so Z and C are set.
      
      All the above ARM instructions are not executed, except for two.
      c000d1a0, which has no writeback, and writes below the current stack
      pointer (and that data is lost when we take the next exception.) The
      other instruction which is executed is c000d1ac, which takes us to...
      0xc03493dc.  However, remember that bit 1 of the PC got set.  So that
      makes the PC value 0xc03493de.
      
      And that value is the value we find in the oops dump for PC.  What is
      the instruction here when interpreted in ARM mode?
      
             0:       f71e150c                ; <UNDEFINED> instruction: 0xf71e150c
      
      and there we have our undefined instruction (remember that the 'never'
      condition code, 0xf, has been deprecated and is now always executed as
      it is now being used for additional instructions.)
      
      This path also nicely explains the state of the stack we see in the oops
      dump too.
      
      The above is a consistent and sane story for how we got to the oops
      dump, which all stems from the instruction at 0xc000d18a being wrong.
      Reported-by: NDaniel Mack <zonque@gmail.com>
      Tested-by: NDaniel Mack <zonque@gmail.com>
      Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      68687c84
    • A
      pinctrl: sirf: remove sirfsoc_gpio_set_pull function · 7bec2074
      Arnd Bergmann 提交于
      The prima2 platform advertises needing no mach/gpio.h header file,
      but its pinctrl driver now has a sirfsoc_gpio_set_pull function
      that uses constants defined in arch/arm/mach-prima2/include/mach/gpio.h,
      which fails to build.
      
      Fortunately, the sirfsoc_gpio_set_pull is not used anywhere in the
      kernel, so we can safely remove it. Any out of tree drivers using
      it will have to be converted to use proper pinctrl functions to
      do the same.
      
      Without this patch, building prima2_defconfig results in:
      
      drivers/pinctrl/pinctrl-sirf.c: In function 'sirfsoc_gpio_set_pull':
      drivers/pinctrl/pinctrl-sirf.c:1331:7: error: 'SIRFSOC_GPIO_PULL_NONE' undeclared (first use in this function)
      drivers/pinctrl/pinctrl-sirf.c:1331:7: note: each undeclared identifier is reported only once for each function it appears in
      drivers/pinctrl/pinctrl-sirf.c:1334:7: error: 'SIRFSOC_GPIO_PULL_UP' undeclared (first use in this function)
      drivers/pinctrl/pinctrl-sirf.c:1338:7: error: 'SIRFSOC_GPIO_PULL_DOWN' undeclared (first use in this function)
      Signed-off-by: NArnd Bergmann <arnd@arndb.de>
      Acked-by: NBarry Song <Baohua.Song@csr.com>
      Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
      7bec2074
    • P
      sh: Wire up kcmp syscall. · cf759932
      Paul Mundt 提交于
      Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      cf759932
    • M
      x86, boot: Explicitly include autoconf.h for hostprogs · b6eea87f
      Matt Fleming 提交于
      The hostprogs need access to the CONFIG_* symbols found in
      include/generated/autoconf.h.  But commit abbf1590 ("UAPI: Partition
      the header include path sets and add uapi/ header directories") replaced
      $(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary
      include paths.
      
      This has the undesirable effect of breaking the EFI boot stub because
      the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is
      never compiled.
      
      It should also be noted that because $(USERINCLUDE) isn't exported by
      the top-level Makefile it's actually empty in arch/x86/boot/Makefile.
      
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Ingo Molnar <mingo@kernel.org>
      Acked-by: NDavid Howells <dhowells@redhat.com>
      Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      b6eea87f
  4. 14 10月, 2012 2 次提交
    • R
      ARM: config: make sure that platforms are ordered by option string · 93e22567
      Russell King 提交于
      The large platform selection choice should be sorted by option string
      so it's easy to find the platform you're looking for.  Fix the few
      options which are out of this order.
      Acked-by: NTony Lindgren <tony@atomide.com>
      Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      93e22567
    • R
      ARM: config: sort select statements alphanumerically · b1b3f49c
      Russell King 提交于
      As suggested by Andrew Morton:
      
        This is a pet peeve of mine.  Any time there's a long list of items
        (header file inclusions, kconfig entries, array initalisers, etc) and
        someone wants to add a new item, they *always* go and stick it at the
        end of the list.
      
        Guys, don't do this.  Either put the new item into a randomly-chosen
        position or, probably better, alphanumerically sort the list.
      
      lets sort all our select statements alphanumerically.  This commit was
      created by the following perl:
      
      while (<>) {
      	while (/\\\s*$/) {
      		$_ .= <>;
      	}
      	undef %selects if /^\s*config\s+/;
      	if (/^\s+select\s+(\w+).*/) {
      		if (defined($selects{$1})) {
      			if ($selects{$1} eq $_) {
      				print STDERR "Warning: removing duplicated $1 entry\n";
      			} else {
      				print STDERR "Error: $1 differently selected\n".
      					"\tOld: $selects{$1}\n".
      					"\tNew: $_\n";
      				exit 1;
      			}
      		}
      		$selects{$1} = $_;
      		next;
      	}
      	if (%selects and (/^\s*$/ or /^\s+help/ or /^\s+---help---/ or
      			  /^endif/ or /^endchoice/)) {
      		foreach $k (sort (keys %selects)) {
      			print "$selects{$k}";
      		}
      		undef %selects;
      	}
      	print;
      }
      if (%selects) {
      	foreach $k (sort (keys %selects)) {
      		print "$selects{$k}";
      	}
      }
      
      It found two duplicates:
      
      Warning: removing duplicated S5P_SETUP_MIPIPHY entry
      Warning: removing duplicated HARDIRQS_SW_RESEND entry
      
      and they are identical duplicates, hence the shrinkage in the diffstat
      of two lines.
      
      We have four testers reporting success of this change (Tony, Stephen,
      Linus and Sekhar.)
      Acked-by: NJason Cooper <jason@lakedaemon.net>
      Acked-by: NTony Lindgren <tony@atomide.com>
      Acked-by: NStephen Warren <swarren@nvidia.com>
      Acked-by: NLinus Walleij <linus.walleij@linaro.org>
      Acked-by: NSekhar Nori <nsekhar@ti.com>
      Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      b1b3f49c
  5. 13 10月, 2012 6 次提交
  6. 12 10月, 2012 10 次提交
  7. 11 10月, 2012 10 次提交