The addition of the DC_FLUSH failed to ensure sanctity of the post-sync
write as CI immediately got a completion CS-event before the breadcrumb
was coherent. So let's try the other idea of moving the post-sync write
into the CS_STALL.

References: https://bugs.freedesktop.org/show_bug.cgi?id=111514
References: e8f6b495 ("drm/i915/execlists: Flush the post-sync breadcrumb write harder")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829081150.10271-2-chris@chris-wilson.co.uk

Create a new function intel_commit_modeset_disables() consistent
with the naming in drm atomic helpers and similar to the enable function.
This helps better organize the disable sequence in atomic_commit_tail()

No functional change

v4:
* Do not create a function pointer, just a function (Maarten)
v3:
* Rebase (Manasi)
v2:
* Create a helper for old_crtc_state disables (Lucas)
Suggested-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190828224701.422-1-manasi.d.navare@intel.com

This patch has no functional changes. This just renames the update_crtcs()
hooks to commit_modeset_enables() to match the drm_atomic helper naming
conventions.

v2:
* Rebase on drm-tip
Suggested-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827221735.29351-2-manasi.d.navare@intel.com

The sg_table for our backing store might contain addresses from
stolen-memory or in the future local-memory, at which point this is no
longer a dma-iterator. As a consequence we should now break on NULL
iter.sgp, instead of dmap == 0 which is considered an invalid dma
address.

As a bonus, gcc much prefers this construct,

  Function                                     old     new   delta
  gen8_ggtt_insert_entries                     211     192     -19
  gen6_ggtt_insert_entries                     292     262     -30
  i915_error_object_create                     996     954     -42
Signed-off-by: NMatthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829201919.21493-1-matthew.auld@intel.com

During normal driver unload we attempt to disable GuC communication
while it is currently stopped. This results in a nop'd call to
intel_guc_ct_disable within guc_disable_communication because
stop/disable rely on the same flag to prevent further comms with CT.

We can avoid the call to disable and still leave communication in a
satisfactory state by extracting a set of shared steps from stop/disable.
This set can include guc_disable_interrupts as we do not require the
single caller of guc_stop_communication to be atomic:
"drm/i915/selftests: Fixup atomic reset checking".

This situation (stop -> disable) only occurs during intel_uc_fini_hw,
so during fini, call guc_disable_communication only if currently enabled.
The symmetric calls to enable/disable remain unmodified for all other
scenarios.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110943Signed-off-by: NFernando Pacheco <fernando.pacheco@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829174154.14675-1-fernando.pacheco@intel.com

Let the scheduler have a breather in between passes of the longer buddy
tests. Important if we are running under kasan etc and this takes far
longer than usual!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829170848.969-1-chris@chris-wilson.co.uk

According to BSpc if link standby is set on TGL+, PSR will not be
enabled. Vendors should not use panels that requires link standby and
even if they do, panel should assert a PSR error that will cause PSR to
be disabled.

BSpec: 50434
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-8-lucas.demarchi@intel.com

Yf tiling was removed in gen-12, so do not expose Yf modifiers to user
space. Gen-12 display also is incompatible with pre-gen12 Y-tiled
CCS, so do not expose I915_FORMAT_MOD_Y_TILED_CCS.

v2: Rebase to carry forward recently added gen11 formats.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827084516.6748-1-dhinakaran.pandiyan@intel.com

DSC was not supported on Pipe A for previous platforms. Tigerlake onwards,
all the pipes support DSC. Hence, the DSC and FEC restriction on
Pipe A needs to be removed.

v2: Changes in the logic around removing the restriction around
    Pipe A (Manasi, Lucas)

Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NMadhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823004655.28905-1-madhumitha.tolakanahalli.pradeep@intel.com

Trust our own workers to not cause unnecessary delays and disable the
automatic timeout on their asynchronous fence waits. (Along the same
lines that we trust our own requests to complete eventually, if
necessary by force.)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826072149.9447-6-chris@chris-wilson.co.uk

There is a difference in BSpec's and the driver's designation of DDI
ports. BSpec uses the following names:
- before GEN11:
  BSpec/driver:
  	port A/B/C/D etc
- GEN11:
  BSpec/driver:
	port A-F
- GEN12:
  BSpec:
  	port A/B/C for combo PHY ports
	port TC1-6 for Type C PHY ports
  driver:
	port A-I.
  The driver's port D name matches BSpec's TC1 port name.

So far power domains were named according to the BSpec designation, to
make it easier to match the code against the specification. That however
can be confusing when a power domain needs to be matched to a port on
GEN12+. To resolve that use the driver's port A-I designation for power
domain names too and rename the corresponding power wells so that they
reflect the mapping from the driver's to BSpec's port name.

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823100711.27833-1-imre.deak@intel.com

We've been ignoring similar coherency issues in IGT for Broadwater, and
specifically Broadwater (original gen4) and not, for example, Crestline
(same generation as Broadwater, but the mobile variant). Without any
means to reproduce locally (I have a 965GM but alas no 965G), fixing will
be slow, so tell CI to ignore any failure until we are ready with a fix.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826133837.6784-1-chris@chris-wilson.co.uk

Our current avoidance of non readable mcr range was not
inclusive enough. Extend the start and end.

References: HSDES#1405586840
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190809145653.2279-1-mika.kuoppala@linux.intel.com

Quite rarely we see that the CS completion event fires before the
breadcrumb is coherent, which presumably is a result of the CS_STALL not
waiting for the post-sync operation. Try throwing in a DC_FLUSH into
the following pipecontrol to see if that makes any difference.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827120615.31390-1-chris@chris-wilson.co.uk

igt_ctx_exec allocates a new context for each iteration, keeping them
all allocated until the end. Instead, release the local ctx reference at
the end of each iteration, allowing ourselves to reap those if under
mempressure.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827161726.3640-2-chris@chris-wilson.co.uk

Upon object creation for live_gem_contexts, we fill the object with
known scratch and flush it out of the CPU cache. Before performing the
GPU fill, we don't need to flush it again and so avoid serialising with
previous fills.

However, we do need some throttling on the internal interfaces if we do
not want to run out of memory!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827161726.3640-1-chris@chris-wilson.co.uk

The CS pre-parser can pre-fetch commands across memory sync points and
starting from gen12 it is able to pre-fetch across BB_START and BB_END
boundaries as well, so when we emit gpu relocs the pre-parser might
fetch the target location of the reloc before the memory write lands.

The parser can't pre-fetch across the ctx switch, so we use a separate
context to guarantee that the memory is synchronized before the parser
can get to it.

Note that there is no risk of the CS doing a lite restore from the reloc
context to the user context, even if the two have the same hw_id,
because since gen11 the CS also checks the LRCA when deciding if it can
lite-restore.

v2: limit new context to gen12+, release in eb_destroy, add a comment
    in emit_fini_breadcrumb (Chris).
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827185805.21799-1-daniele.ceraolospurio@intel.com

Compared to Icelake, Tigerlake's MAX_CONTEXT_HW_ID is smaller by one, but
since we just use the upper 32 bits of the lrc_desc, it's guaranteed OA
will use the correct one.

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NUmesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-19-lucas.demarchi@intel.com

Workaround no longer needed (plus L3_LRA_1_GPGPU doesn't exist).

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-17-lucas.demarchi@intel.com

On TGL some registers moved from DDI to transcoder and the
DisplayPort training sequence has a separate BSpec page.

I started adding 'ifs' to the original intel_ddi_pre_enable_dp() but
it was becoming really hard to follow, so a new and cleaner function
for TGL was added with comments of all steps. It's similar to ICL,
but different enough to deserve a new function.

The rest of DisplayPort enable and the whole disable sequences
remained the same.

v2: FEC and DSC should be enabled on sink side before start link
training(Maarten reported and Manasi confirmed the DSC part)

v3: Add call to enable FEC on step 7.l(Manasi)

BSpec: 49190
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-16-lucas.demarchi@intel.com

Disable CRTC/pipes in reverse order because some features (MST in
TGL+) requires master and slave relationship between pipes, so it
should always pick the lowest pipe as master as it will be enabled
first and disable in the reverse order so the master will be the last
one to be disabled.

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-13-lucas.demarchi@intel.com

Same as for_each_oldnew_intel_crtc_in_state() but iterates in reverse
order.

v2: Fix additional blank line
v3: Rebase

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NMika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-12-lucas.demarchi@intel.com

TGL PSR2 HW supports a bigger resolution, so lets add it

BSpec: 50422, 49199
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-10-lucas.demarchi@intel.com

This fix unclaimed access warnings:

[  245.525788] ------------[ cut here ]------------
[  245.525884] Unclaimed read from register 0x62900
[  245.526154] WARNING: CPU: 0 PID: 1234 at drivers/gpu/drm/i915/intel_uncore.c:1100 __unclaimed_reg_debug+0x40/0x50 [i915]
[  245.526160] Modules linked in: i915 x86_pkg_temp_thermal ax88179_178a coretemp usbnet crct10dif_pclmul mii crc32_pclmul ghash_clmulni_intel e1000e [last unloaded: i915]
[  245.526191] CPU: 0 PID: 1234 Comm: kms_fullmodeset Not tainted 5.1.0-rc6+ #915
[  245.526197] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWR1.D00.2081.A10.1904182155 04/18/2019
[  245.526273] RIP: 0010:__unclaimed_reg_debug+0x40/0x50 [i915]
[  245.526281] Code: 74 05 5b 5d 41 5c c3 45 84 e4 48 c7 c0 76 97 21 a0 48 c7 c6 6c 97 21 a0 89 ea 48 0f 44 f0 48 c7 c7 7f 97 21 a0 e8 4f 1e fe e0 <0f> 0b 83 2d 6f d9 1c 00 01 5b 5d 41 5c c3 66 90 41 57 41 56 41 55
[  245.526288] RSP: 0018:ffffc900006bf7d8 EFLAGS: 00010086
[  245.526297] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[  245.526304] RDX: 0000000000000007 RSI: 0000000000000000 RDI: 00000000ffffffff
[  245.526310] RBP: 0000000000061900 R08: 0000000000000000 R09: 0000000000000001
[  245.526317] R10: 0000000000000006 R11: 0000000000000000 R12: 0000000000000001
[  245.526324] R13: 0000000000000000 R14: ffff8882914f0d58 R15: 0000000000000206
[  245.526332] FS:  00007fed2a3c39c0(0000) GS:ffff8882a8600000(0000) knlGS:0000000000000000
[  245.526340] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  245.526347] CR2: 00007fed28dff000 CR3: 00000002a086c006 CR4: 0000000000760ef0
[  245.526354] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  245.526361] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  245.526367] PKRU: 55555554
[  245.526373] Call Trace:
[  245.526454]  gen11_fwtable_read32+0x219/0x250 [i915]
[  245.526576]  intel_psr_activate+0x57/0x400 [i915]
[  245.526697]  intel_psr_enable_locked+0x367/0x4b0 [i915]
[  245.526828]  intel_psr_enable+0xa4/0xd0 [i915]
[  245.526946]  intel_enable_ddi+0x127/0x2f0 [i915]
[  245.527075]  intel_encoders_enable.isra.79+0x62/0x90 [i915]
[  245.527202]  haswell_crtc_enable+0x2a2/0x850 [i915]
[  245.527337]  intel_update_crtc+0x51/0x360 [i915]
[  245.527466]  skl_update_crtcs+0x26c/0x300 [i915]
[  245.527603]  intel_atomic_commit_tail+0x3e5/0x13c0 [i915]
[  245.527757]  intel_atomic_commit+0x24d/0x2d0 [i915]
[  245.527782]  drm_atomic_helper_set_config+0x7b/0x90
[  245.527799]  drm_mode_setcrtc+0x1b4/0x6f0
[  245.527856]  ? drm_mode_getcrtc+0x180/0x180
[  245.527867]  drm_ioctl_kernel+0xad/0xf0
[  245.527886]  drm_ioctl+0x2f4/0x3b0
[  245.527902]  ? drm_mode_getcrtc+0x180/0x180
[  245.527935]  ? rcu_read_lock_sched_held+0x6f/0x80
[  245.527956]  do_vfs_ioctl+0xa0/0x6d0
[  245.527970]  ? __task_pid_nr_ns+0xb6/0x200
[  245.527991]  ksys_ioctl+0x35/0x70
[  245.528009]  __x64_sys_ioctl+0x11/0x20
[  245.528020]  do_syscall_64+0x55/0x180
[  245.528034]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  245.528042] RIP: 0033:0x7fed2cc7c3c7
[  245.528050] Code: 00 00 90 48 8b 05 c9 3a 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 99 3a 0d 00 f7 d8 64 89 01 48
[  245.528057] RSP: 002b:00007ffe36944378 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[  245.528067] RAX: ffffffffffffffda RBX: 00007ffe369443b0 RCX: 00007fed2cc7c3c7
[  245.528074] RDX: 00007ffe369443b0 RSI: 00000000c06864a2 RDI: 0000000000000003
[  245.528081] RBP: 00007ffe369443b0 R08: 0000000000000000 R09: 0000564c0173ae98
[  245.528088] R10: 0000564c0173aeb8 R11: 0000000000000246 R12: 00000000c06864a2
[  245.528095] R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
[  245.528128] irq event stamp: 140866
[  245.528138] hardirqs last  enabled at (140865): [<ffffffff819a63dc>] _raw_spin_unlock_irqrestore+0x4c/0x60
[  245.528148] hardirqs last disabled at (140866): [<ffffffff819a624d>] _raw_spin_lock_irqsave+0xd/0x50
[  245.528158] softirqs last  enabled at (140860): [<ffffffff81c0038c>] __do_softirq+0x38c/0x499
[  245.528170] softirqs last disabled at (140853): [<ffffffff810b4a09>] irq_exit+0xa9/0xc0
[  245.528247] WARNING: CPU: 0 PID: 1234 at drivers/gpu/drm/i915/intel_uncore.c:1100 __unclaimed_reg_debug+0x40/0x50 [i915]
[  245.528254] ---[ end trace 366069676e98a410 ]---
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-7-lucas.demarchi@intel.com

On TGL+ it's possible to have PSR1 enabled in other ports besides DDIA.
PSR2 is still limited to DDIA. However currently we handle only one
instance of PSR struct. Lets guard intel_psr_init_dpcd() against
multiple eDP panels and warn about it.

v2: Reword commit message to be TGL+ only and with the info where
PSR1/PSR2 are supported (Lucas)

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823082055.5992-6-lucas.demarchi@intel.com

A virtual engine itself does not have a batch pool, but we can gleefully
use any of its siblings instead.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827135935.3831-1-chris@chris-wilson.co.uk

The point of debug_object_activate is to mark the first, and only the
first, acquisition. The object then remains active until the last
release.  However, we marked up all successful first acquires even though
we allowed concurrent parties to try and acquire the i915_active
simultaneously (serialised by the i915_active.mutex).

Testcase: igt/gem_mmap_gtt/fault-concurrent
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827132631.18627-1-chris@chris-wilson.co.uk

If we create a new live_context() we should have a mapping for each
engine. Document that assumption with an assertion.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827094933.13778-1-chris@chris-wilson.co.uk

The intention is that we first try to pin the current vma into the
mappable aperture only if it is already in use or it fits in the free
space and will not cause contention. The first attempt was meant to be
using PIN_NOEVICT to reuse the current vma if possible, following up
with different eviction strategies.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111485
Fixes: 6846895f ("drm/i915: Replace PIN_NONFAULT with calls to PIN_NOEVICT")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826130750.17272-1-chris@chris-wilson.co.uk

To properly handle asynchronous migration of batch objects, we need to
couple the fences on the incoming batch into the request and should not
assume that they always start idle.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826072149.9447-1-chris@chris-wilson.co.uk

Currently, we don't call dma_set_max_seg_size() for i915 because we
intentionally do not limit the segment length that the device supports.
However, this results in a warning being emitted if we try to map
anything larger than SZ_64K on a kernel with CONFIG_DMA_API_DEBUG_SG
enabled:

[    7.751926] DMA-API: i915 0000:00:02.0: mapping sg segment longer
than device claims to support [len=98304] [max=65536]
[    7.751934] WARNING: CPU: 5 PID: 474 at kernel/dma/debug.c:1220
debug_dma_map_sg+0x20f/0x340

This was originally brought up on
https://bugs.freedesktop.org/show_bug.cgi?id=108517 , and the consensus
there was it wasn't really useful to set a limit (and that dma-debug
isn't really all that useful for i915 in the first place). Unfortunately
though, CONFIG_DMA_API_DEBUG_SG is enabled in the debug configs for
various distro kernels. Since a WARN_ON() will disable automatic problem
reporting (and cause any CI with said option enabled to start
complaining), we really should just fix the problem.

Note that as me and Chris Wilson discussed, the other solution for this
would be to make DMA-API not make such assumptions when a driver hasn't
explicitly set a maximum segment size. But, taking a look at the commit
which originally introduced this behavior, commit 78c47830
("dma-debug: check scatterlist segments"), there is an explicit mention
of this assumption and how it applies to devices with no segment size:

	Conversely, devices which are less limited than the rather
	conservative defaults, or indeed have no limitations at all
	(e.g. GPUs with their own internal MMU), should be encouraged to
	set appropriate dma_parms, as they may get more efficient DMA
	mapping performance out of it.

So unless there's any concerns (I'm open to discussion!), let's just
follow suite and call dma_set_max_seg_size() with UINT_MAX as our limit
to silence any warnings.

Changes since v3:
* Drop patch for enabling CONFIG_DMA_API_DEBUG_SG in CI. It looks like
  just turning it on causes the kernel to spit out bogus WARN_ONs()
  during some igt tests which would otherwise require teaching igt to
  disable the various DMA-API debugging options causing this. This is
  too much work to be worth it, since DMA-API debugging is useless for
  us. So, we'll just settle with this single patch to squelch WARN_ONs()
  during driver load for users that have CONFIG_DMA_API_DEBUG_SG turned
  on for some reason.
* Move dma_set_max_seg_size() call into i915_driver_hw_probe() - Chris
  Wilson
Signed-off-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patchwork.freedesktop.org/patch/msgid/20190823205251.14298-1-lyude@redhat.com

vgpu ppgtt notification was split into 2 steps, the first step is to
update PVINFO's pdp register and then write PVINFO's g2v_notify register
with action code to tirgger ppgtt notification to GVT side.

currently these steps were not atomic operations due to no any protection,
so it is easy to enter race condition state during the MTBF, stress and
IGT test to cause GPU hang.

the solution is to add a lock to make vgpu ppgtt notication as atomic
operation.

Cc: stable@vger.kernel.org
Signed-off-by: NXiaolin Zhang <xiaolin.zhang@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1566543451-13955-1-git-send-email-xiaolin.zhang@intel.com

Avoid having to pass around (ctx, engine) everywhere by passing the
actual intel_context we intend to use. Today we preach this lesson to
igt_gpu_fill_dw and its callers' callers.

The immediate benefit for the GEM selftests is that we aim to use the
GEM context as the control, the source of the engines on which to test
the GEM context.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823235141.31799-1-chris@chris-wilson.co.uk

Ensure that the drm_i915_file_private continues to exist as we attempt
to remove a request from its list, which may race with the destruction
of the file.

<6> [38.380714] [IGT] gem_ctx_create: starting subtest basic-files
<0> [42.201329] BUG: spinlock bad magic on CPU#0, kworker/u16:0/7
<4> [42.201356] general protection fault: 0000 [#1] PREEMPT SMP PTI
<4> [42.201371] CPU: 0 PID: 7 Comm: kworker/u16:0 Tainted: G     U            5.3.0-rc5-CI-Patchwork_14169+ #1
<4> [42.201391] Hardware name: Dell Inc.                 OptiPlex 745                 /0GW726, BIOS 2.3.1  05/21/2007
<4> [42.201594] Workqueue: i915 retire_work_handler [i915]
<4> [42.201614] RIP: 0010:spin_dump+0x5a/0x90
<4> [42.201625] Code: 00 48 8d 88 c0 06 00 00 48 c7 c7 00 71 09 82 e8 35 ef 00 00 48 85 db 44 8b 4d 08 41 b8 ff ff ff ff 48 c7 c1 0b cd 0f 82 74 0e <44> 8b 83 e0 04 00 00 48 8d 8b c0 06 00 00 8b 55 04 48 89 ee 48 c7
<4> [42.201660] RSP: 0018:ffffc9000004bd80 EFLAGS: 00010202
<4> [42.201673] RAX: 0000000000000031 RBX: 6b6b6b6b6b6b6b6b RCX: ffffffff820fcd0b
<4> [42.201688] RDX: 0000000000000000 RSI: ffff88803de266f8 RDI: 00000000ffffffff
<4> [42.201703] RBP: ffff888038381ff8 R08: 00000000ffffffff R09: 000000006b6b6b6b
<4> [42.201718] R10: 0000000041cb0b89 R11: 646162206b636f6c R12: ffff88802a618500
<4> [42.201733] R13: ffff88802b32c288 R14: ffff888038381ff8 R15: ffff88802b32c250
<4> [42.201748] FS:  0000000000000000(0000) GS:ffff88803de00000(0000) knlGS:0000000000000000
<4> [42.201765] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4> [42.201778] CR2: 00007f2cefc6d180 CR3: 00000000381ee000 CR4: 00000000000006f0
<4> [42.201793] Call Trace:
<4> [42.201805]  do_raw_spin_lock+0x66/0xb0
<4> [42.201898]  i915_request_retire+0x548/0x7c0 [i915]
<4> [42.201989]  retire_requests+0x4d/0x60 [i915]
<4> [42.202078]  i915_retire_requests+0x144/0x2e0 [i915]
<4> [42.202169]  retire_work_handler+0x10/0x40 [i915]

Recently, in commit 44c22f3f ("drm/i915: Serialize insertion into the
file->mm.request_list"), we fixed a race on insertion. Now, it appears
we also have a race with destruction!
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823181455.31910-1-chris@chris-wilson.co.uk

First uc firmware release for EHL.
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NStuart Summers <stuart.summers@intel.com>
Tested-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190820012327.36443-1-daniele.ceraolospurio@intel.com

Our fence management is lazy, very lazy. If the user marks an object as
untiled, we do not immediately flush the fence but merely mark it as
dirty. On the next use we have to remember to check and remove the fence,
by which time we hope it is idle and we do not have to wait.

v2: Throw away the old fence on the next ggtt_pin.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111468
Fixes: 1f7fd484 ("drm/i915: Replace i915_vma_put_fence()")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: NMatthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823153944.20630-1-chris@chris-wilson.co.uk

In order for the Braswell top-level PD to remain the same from the time
of request construction to its submission onto HW, as we may be
asynchronously rewriting the page tables (thus changing the expected
register state after having already stored the old addresses in the
request), the top level PD must be preallocated.

So wave goodbye to our lazy allocation of those 4x2 pages.

v2: A little bit of write-flushing required (presumably it always has
been required, but now we are more susceptible and it is showing up!)

v3: Put back the forced-PD-reload on every batch, we can't survive
without it and explicitly marking the context for PD reload makes
Braswell turn nasty.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823141421.2398-1-chris@chris-wilson.co.uk

Sadly lockdep records when the irqs are re-enabled and then marks up the
fake lock as being irq-unsafe. Our hand is forced and so we must mark up
the entire fake lock critical section as irq-off.

Hopefully this is the last tweak required!

v2: Not quite, we need to mark the timeline spinlock as irqsafe. That
was a genuine bug being hidden by the earlier lockdep splat.

Fixes: d6773926 ("drm/i915/gt: Mark up the nested engine-pm timeline lock as irqsafe")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823132700.25286-2-chris@chris-wilson.co.uk

Use hweight8() instead of hweight32() for 8bit masks. Doesn't actually
matter for us since the arch code will go for hweight32() anyway, but
maybe we stil want to do this for documentation purposes?
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-5-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>

Set a good example and talk about pipes rather than crtcs.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190821173033.24123-4-ville.syrjala@linux.intel.comReviewed-by: NJani Nikula <jani.nikula@intel.com>