Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Remove unused variable in msr_write().

Reported by D Binderman <dcb314@hotmail.com>.

Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NDavid Rientjes <rientjes@cs.washington.edu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Following i386 from Duncan Sands
Signed-off-by: NAndi Kleen <ak@suse.de>

Since v->counter is both read and written, it should be an output as well
as an input for the asm.  The current code only gets away with this because
counter is volatile.  Also, according to Documents/atomic_ops.txt,
atomic_add_return should provide a memory barrier, in particular a compiler
barrier, so the asm should be marked as clobbering memory.

Test case:

#include <stdio.h>

typedef struct { int counter; } atomic_t; /* NB: no "volatile" */

#define ATOMIC_INIT(i)	{ (i) }

#define atomic_read(v)		((v)->counter)

static __inline__ int atomic_add_return(int i, atomic_t *v)
{
	int __i = i;

	__asm__ __volatile__(
		"lock; xaddl %0, %1;"
		:"=r"(i)
		:"m"(v->counter), "0"(i));
/*	__asm__ __volatile__(
		"lock; xaddl %0, %1"
		:"+r" (i), "+m" (v->counter)
		: : "memory"); */
	return i + __i;
}

int main (void) {
	atomic_t a = ATOMIC_INIT(0);
	int x;

	x = atomic_add_return (1, &a);
	if ((x!=1) || (atomic_read(&a)!=1))
		printf("fail: %i, %i\n", x, atomic_read(&a));
}
Signed-off-by: NDuncan Sands <baldrick@free.fr>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Acked-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Correct the documentation for bzImage protocol extension due to relocatable
bzImage.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Acked-by: N"H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

  CC      arch/i386/boot/compressed/misc.o
arch/i386/boot/compressed/misc.c:120: error: static declaration of 'xquad_portio' follows non-static declaration
include/asm/io.h:275: error: previous declaration of 'xquad_portio' was here
make[2]: *** [arch/i386/boot/compressed/misc.o] Error 1
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NAndi Kleen <ak@suse.de>

Nothing in include/asm-x86_64/cpufeature.h is part of the
userspace<->kernel interface.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndi Kleen <ak@suse.de>

Add debugging printks to the unwinder to allow easier debugging
when something goes wrong with it.

This can be controlled with the new unwinder_debug=N option
Most output is given by N=1

AK: Added documentation of unwinder_debug=
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

- Remove "Disabling IOMMU" message because it confuses people
- Clarify that the GART IOMMU is refered to in other message
Signed-off-by: NAndi Kleen <ak@suse.de>

Idle callbacks has some races when enter_idle() sets isidle and subsequent
interrupts that can happen on that CPU, before CPU goes to idle. Due to this,
an IDLE_END can get called before IDLE_START. To avoid these races, disable
interrupts before enter_idle and make sure that all idle routines do not
enable interrupts before entering idle.

Note that poll_idle() still has a this race as it has to enable interrupts
before going to idle. But, all other idle routines have the race fixed.
Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

This was added as a workaround for the fallback unwinder not supporting
unaligned stack pointers properly. But now it was fixed to do that,
so it's not needed anymore

Cc: mingo@elte.hu
Signed-off-by: NAndi Kleen <ak@suse.de>

Tighten the requirements on both input to and output from the Dwarf2
unwinder.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Shouldn't be needed anymore since __kernel_text_address
is used unconditionally on x86-64
Signed-off-by: NAndi Kleen <ak@suse.de>

We're already well protected against module unloads because module
unload uses stop_machine(). The only exception is NMIs, but other
users already risk lockless accesses here.

This avoids some hackery in lockdep and also a potential deadlock

This matches what i386 does.
Signed-off-by: NAndi Kleen <ak@suse.de>

This avoids trouble with the page fault handler if the fault
happens inside an interrupt context.

Suggested by Linus

Cc: jbeulich@novell.com
Signed-off-by: NAndi Kleen <ak@suse.de>

On the Core2 cpus, the rdtsc instruction is not serializing (as defined
in the architecture reference since rdtsc exists) and due to the deep
speculation of these cores, it's possible that you can observe time go
backwards between cores due to this speculation. Since the kernel
already deals with this with the SYNC_RDTSC flag, the solution is
simple, only assume that the instruction is serializing on family 15...

The price one pays for this is a slightly slower gettimeofday (by a
dozen or two cycles), but that increase is quite small to pay for a
really-going-forward tsc counter.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Spotted by d binderman <dcb314@hotmail.com>.
Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

There is no guarantee that two RDTSCs in a row are monotonic,
so don't assume it on single core AMD systems.
This will make gettimeofday slower again
Signed-off-by: NAndi Kleen <ak@suse.de>

-mregparm=3 has been enabled by default for some time on i386, and AFAIK
there aren't any problems with it left.

This patch removes the REGPARM config option and sets -mregparm=3
unconditionally.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndi Kleen <ak@suse.de>

remove unused acpi_found_madt in mparse.c
Signed-off-by: NYinghai Lu <yinghai.lu@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Sometimes the soft watchdog fires after we're done oopsing.
See http://projects.info-pull.com/mokb/MOKB-25-11-2006.html for an example.

AK: changed to touch_nmi_watchdog()
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Make mce_remove_device() clean up the kobject in per_cpu(device_mce, cpu)
after it has been unregistered.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NAndi Kleen <ak@suse.de>

One ARCH_DISCONTIGMEM_ENABLE option is enough.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndi Kleen <ak@suse.de>

interrupt array is referred for idt vectors instead of NR_IRQS, so change size
to NR_VECTORS - FIRST_EXTERNAL_VECTOR. Also change to static.
Signed-off-by: NYinghai Lu <yinghai@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

idt_table is in the .bss section, so clear_bss need to called at first
Signed-off-by: NYinghai Lu <yinghai.lu@amd.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Add sysctl for kstack_depth_to_print. This lets users change
the amount of raw stack data printed in dump_stack() without
having to reboot.
Signed-off-by: NChuck Ebbert <76306.1226@compuserve.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

The comments for MSR_FS_BASE & MSR_GS_BASE were transposed.
Signed-off-by: NWink Saville <wink@saville.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Remove unused GET_APIC_VERSION call from clear_local_APIC() and
__setup_APIC_LVTT().

Reported by D Binderman <dcb314@hotmail.com>.

Cc: Andi Kleen <ak@suse.de>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: NDavid Rientjes <rientjes@cs.washington.edu>
Signed-off-by: NAndi Kleen <ak@suse.de>

We do the exact same printk about a dozen lines above
with no intermediate printk's.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

When using memmap kernel parameter in EFI boot we should also add to memory map
memory regions of runtime services to enable their mapping later.

AK: merged and cleaned up the patch
Signed-off-by: NArtiom Myaskouvskey <artiom.myaskouvskey@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Read/Write APIC_LVTPC and APIC_LVTTHMR only,
if get_maxlvt() returns certain values.
This is done like everywhere else in i386/kernel/apic.c,
so I guess its correct.
Suspends/Resumes to disk fine and eleminates an smp_error_interrupt()
here on a K8.

AK: ported to x86-64 too
Signed-off-by: NKarsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: NAndi Kleen <ak@suse.de>

There are two consumers of apic=: the apic debug level and the low
level generic architecture code. early_param would warn when the
low level code rejected "debug". Avoid this.
Signed-off-by: NAndi Kleen <ak@suse.de>

Here is a small patch for i386 which adds a cpufeature flag and
detection code for Intel's Branch Trace Store (BTS) feature. This
feature can be found on Intel P4 and Core 2 processors among others.
It can also be used by perfmon.

changelog:
	- add CPU_FEATURE_BTS
	- add Branch Trace Store detection
signed-off-by: Nstephane eranian <eranian@hpl.hp.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

Here is a small patch for x86-64 which adds a cpufeature flag and
detection code for Intel's Branch Trace Store (BTS) feature. This
feature can be found on Intel P4 and Core 2 processors among others.
It can also be used by perfmon.

changelog:
	- add CPU_FEATURE_BTS
	- add Branch Trace Store detection
signed-off-by: Nstephane eranian <eranian@hpl.hp.com>
Signed-off-by: NAndi Kleen <ak@suse.de>

irq_vector[] can now become static.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndi Kleen <ak@suse.de>
Acked-by: NEric W. Biederman <ebiederm@xmission.com>
Acked-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

The Coverity checker noted that bad things might happen if
find_isa_irq_apic() returned -1.

[akpm@osdl.org: add debugging checks]
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Acked-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Function efi_get_time called not only during init kernel phase but also
during suspend (from get_cmos_time).

When it is called from get_cmos_time the corresponding runtime service
should be called in virtual and not in physical mode.
Signed-off-by: NArtiom Myaskouvskey <artiom.myaskouvskey@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: "Narayanan, Chandramouli" <chandramouli.narayanan@intel.com>
Cc: "Jiossy, Rami" <rami.jiossy@intel.com>
Cc: "Satt, Shai" <shai.satt@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Matt Domsch <Matt_Domsch@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Move the irqbalance quirks for E7320/E7520/E7525(Errata 23 in
http://download.intel.com/design/chipsets/specupdt/30304203.pdf) to early
quirks.

And add a PCI quirk for these platforms to check(which happens very late
during the boot) if the APIC routing is indeed set to default flat mode.

This fixes the breakage(in x86_64) of this quirk due to cpu hotplug which
selects physical mode instead of the logical flat(as needed for this errata
workaround).
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>