Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 31 3月, 2018 2 次提交
  3. 29 3月, 2018 3 次提交
  5. 28 3月, 2018 9 次提交
  7. 27 3月, 2018 2 次提交
    • S
      perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs · 71eb9ee9
      由 Stephane Eranian 提交于 
      this patch fix a bug in how the pebs->real_ip is handled in the PEBS
handler. real_ip only exists in Haswell and later processor. It is
actually the eventing IP, i.e., where the event occurred. As opposed
to the pebs->ip which is the PEBS interrupt IP which is always off
by one.

The problem is that the real_ip just like the IP needs to be fixed up
because PEBS does not record all the machine state registers, and
in particular the code segement (cs). This is why we have the set_linear_ip()
function. The problem was that set_linear_ip() was only used on the pebs->ip
and not the pebs->real_ip.

We have profiles which ran into invalid callstacks because of this.
Here is an example:

 .....  0: ffffffffffffff80 recent entry, marker kernel v
 .....  1: 000000000040044d <= user address in kernel space!
 .....  2: fffffffffffffe00 marker enter user v
 .....  3: 000000000040044d
 .....  4: 00000000004004b6 oldest entry

Debugging output in get_perf_callchain():

 [  857.769909] CALLCHAIN: CPU8 ip=40044d regs->cs=10 user_mode(regs)=0

The problem is that the kernel entry in 1: points to a user level
address. How can that be?

The reason is that with PEBS sampling the instruction that caused the event
to occur and the instruction where the CPU was when the interrupt was posted
may be far apart. And sometime during that time window, the privilege level may
change. This happens, for instance, when the PEBS sample is taken close to a
kernel entry point. Here PEBS, eventing IP (real_ip) captured a user level
instruction. But by the time the PMU interrupt fired, the processor had already
entered kernel space. This is why the debug output shows a user address with
user_mode() false.

The problem comes from PEBS not recording the code segment (cs) register.
The register is used in x86_64 to determine if executing in kernel vs user
space. This is okay because the kernel has a software workaround called
set_linear_ip(). But the issue in setup_pebs_sample_data() is that
set_linear_ip() is never called on the real_ip value when it is available
(Haswell and later) and precise_ip > 1.

This patch fixes this problem and eliminates the callchain discrepancy.

The patch restructures the code around set_linear_ip() to minimize the number
of times the IP has to be set.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1521788507-10231-1-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      71eb9ee9
    • D
      perf/x86: Update rdpmc_always_available static key to the modern API · 631fe154
      由 Davidlohr Bueso 提交于 
      No changes in refcount semantics -- use DEFINE_STATIC_KEY_FALSE()
for initialization and replace:

  static_key_slow_inc|dec()   =>   static_branch_inc|dec()
  static_key_false()          =>   static_branch_unlikely()

Added a '_key' suffix to rdpmc_always_available, for better self-documentation.
Signed-off-by: NDavidlohr Bueso <dbueso@suse.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Link: http://lkml.kernel.org/r/20180326210929.5244-5-dave@stgolabs.netSigned-off-by: NIngo Molnar <mingo@kernel.org>
      631fe154
  9. 26 3月, 2018 8 次提交
  11. 25 3月, 2018 4 次提交
    • I
      Merge tag 'perf-core-for-mingo-4.17-20180323' of... · a0ac7b3c
      由 Ingo Molnar 提交于 
      Merge tag 'perf-core-for-mingo-4.17-20180323' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Move non-TUI specific annotation routines out of the TUI browser so
  that it can be used in other UIs, and to demonstrate that introduce
  a 'perf annotate --stdio2' option that will apply those formatting
  routines to provide a non-interactive annotation mode (Arnaldo Carvalho de Melo)

- Add 'P' hotkey to the annotation TUI, so dump the current annotated
  symbol to a file, easing report thru e-mail, by getting rid of the
  spaces + right hand side scrollbar chars (Arnaldo Carvalho de Melo)

- Support --ignore-vmlinux to 'perf report' and 'perf annotate', that
  was already present in 'perf top', to use /proc/{kcore,kallsyms},
  allowing to see what is in fact running (patched stuff, alternatives,
  ftrace, etc), not the initial state of the kernel (vmlinux) (Arnaldo Carvalho de Melo)

- Support 'jump' instructions to a different function, treating them
  as 'call' instructions (Arnaldo Carvalho de Melo)

- Fix some jump artifacts when using vmlinux + ASM functions, where
  the ELF symtab for instance, for entry_SYSCALL_64 includes that and
  what comes after the 'syscall_return_via_sysret' label, but the
  objdump -dS prints the jump targets + offsets using the
  syscall_return_via_sysret address, which was confusing 'perf annotate'.
  See the cset comments for further info (Arnaldo Carvalho de Melo)

- Report error from dwfl_attach_state() in the unwind code (Martin Vuille)

- Reference Py_None before returning it in the python extension (Petr Machata)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      a0ac7b3c
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace · e43d40b3
      由 Linus Torvalds 提交于 
      Pull mqueuefs revert from Eric Biederman:
 "This fixes a regression that came in the merge window for v4.16.

  The problem is that the permissions for mounting and using the
  mqueuefs filesystem are broken. The necessary permission check is
  missing letting people who should not be able to mount mqueuefs mount
  mqueuefs. The field sb->s_user_ns is set incorrectly not allowing the
  mounter of mqueuefs to remount and otherwise have proper control over
  the filesystem.

  Al Viro and I see the path to the necessary fixes differently and I am
  not even certain at this point he actually sees all of the necessary
  fixes. Given a couple weeks we can probably work something out but I
  don't see the review being resolved in time for the final v4.16. I
  don't want v4.16 shipping with a nasty regression. So unfortunately I
  am sending a revert"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  Revert "mqueue: switch to on-demand creation of internal mount"
      e43d40b3
    • E
      Revert "mqueue: switch to on-demand creation of internal mount" · cfb2f6f6
      由 Eric W. Biederman 提交于 
      This reverts commit 36735a6a.

Aleksa Sarai <asarai@suse.de> writes:
> [REGRESSION v4.16-rc6] [PATCH] mqueue: forbid unprivileged user access to internal mount
>
> Felix reported weird behaviour on 4.16.0-rc6 with regards to mqueue[1],
> which was introduced by 36735a6a ("mqueue: switch to on-demand
> creation of internal mount").
>
> Basically, the reproducer boils down to being able to mount mqueue if
> you create a new user namespace, even if you don't unshare the IPC
> namespace.
>
> Previously this was not possible, and you would get an -EPERM. The mount
> is the *host* mqueue mount, which is being cached and just returned from
> mqueue_mount(). To be honest, I'm not sure if this is safe or not (or if
> it was intentional -- since I'm not familiar with mqueue).
>
> To me it looks like there is a missing permission check. I've included a
> patch below that I've compile-tested, and should block the above case.
> Can someone please tell me if I'm missing something? Is this actually
> safe?
>
> [1]: https://github.com/docker/docker/issues/36674

The issue is a lot deeper than a missing permission check.  sb->s_user_ns
was is improperly set as well.  So in addition to the filesystem being
mounted when it should not be mounted, so things are not allow that should
be.

We are practically to the release of 4.16 and there is no agreement between
Al Viro and myself on what the code should looks like to fix things properly.
So revert the code to what it was before so that we can take our time
and discuss this properly.

Fixes: 36735a6a ("mqueue: switch to on-demand creation of internal mount")
Reported-by: NFelix Abecassis <fabecassis@nvidia.com>
Reported-by: NAleksa Sarai <asarai@suse.de>
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
      cfb2f6f6
    • L
      Merge tag 'pinctrl-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl · bcfc1f45
      由 Linus Torvalds 提交于 
      Pull pin control fixes from Linus Walleij:
 "Two fixes for pin control for v4.16:

   - Renesas SH-PFC: remove a duplicate clkout pin which was causing
     crashes

   - fix Samsung out of bounds exceptions"

* tag 'pinctrl-v4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: samsung: Validate alias coming from DT
  pinctrl: sh-pfc: r8a7795: remove duplicate of CLKOUT pin in pinmux_pins[]
      bcfc1f45
  13. 24 3月, 2018 12 次提交
    • I
      Merge branch 'perf/urgent' into perf/core, to pick up fixes · 7054e4e0
      由 Ingo Molnar 提交于 
      With the cherry-picked perf/urgent commit merged separately we can now
merge all the fixes without conflicts.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      7054e4e0
    • I
      Merge branch 'perf/urgent' into perf/core, to resolve conflicts · 5701dd1e
      由 Ingo Molnar 提交于 
      Pick up a cherry-picked commit.
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      5701dd1e
    • L
      Merge tag 'trace-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace · 99fec39e
      由 Linus Torvalds 提交于 
      Pull kprobe fixes from Steven Rostedt:
 "The documentation for kprobe events says that symbol offets can take
  both a + and - sign to get to befor and after the symbol address.

  But in actuality, the code does not support the minus. This fixes that
  issue, and adds a few more selftests to kprobe events"

* tag 'trace-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  selftests: ftrace: Add a testcase for probepoint
  selftests: ftrace: Add a testcase for string type with kprobe_event
  selftests: ftrace: Add probe event argument syntax testcase
  tracing: probeevent: Fix to support minus offset from symbol
      99fec39e
    • A
      x86/entry/64: Don't use IST entry for #BP stack · d8ba61ba
      由 Andy Lutomirski 提交于 
      There's nothing IST-worthy about #BP/int3.  We don't allow kprobes
in the small handful of places in the kernel that run at CPL0 with
an invalid stack, and 32-bit kernels have used normal interrupt
gates for #BP forever.

Furthermore, we don't allow kprobes in places that have usergs while
in kernel mode, so "paranoid" is also unnecessary.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
      d8ba61ba
    • A
      perf annotate: Use absolute addresses to calculate jump target offsets · 980b68ec
      由 Arnaldo Carvalho de Melo 提交于 
      These types of jumps were confusing the annotate browser:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f/build/vmlinux

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f/build/vmlinux
  Percent│ffffffff81a00020:   swapgs
  <SNIP>
         │ffffffff81a00128: ↓ jae    ffffffff81a00139 <syscall_return_via_sysret+0x53>
  <SNIP>
         │ffffffff81a00155: → jmpq   *0x825d2d(%rip)   # ffffffff82225e88 <pv_cpu_ops+0xe8>

I.e. the syscall_return_via_sysret function is actually "inside" the
entry_SYSCALL_64 function, and the offsets in jumps like these (+0x53)
are relative to syscall_return_via_sysret, not to syscall_return_via_sysret.

Or this may be some artifact in how the assembler marks the start and
end of a function and how this ends up in the ELF symtab for vmlinux,
i.e. syscall_return_via_sysret() isn't "inside" entry_SYSCALL_64, but
just right after it.

From readelf -sw vmlinux:

 80267: ffffffff81a00020   315 NOTYPE  GLOBAL DEFAULT    1 entry_SYSCALL_64
   316: ffffffff81a000e6     0 NOTYPE  LOCAL  DEFAULT    1 syscall_return_via_sysret

 0xffffffff81a00020 + 315 > 0xffffffff81a000e6

So instead of looking for offsets after that last '+' sign, calculate
offsets for jump target addresses that are inside the function being
disassembled from the absolute address, 0xffffffff81a00139 in this case,
subtracting from it the objdump address for the start of the function
being disassembled, entry_SYSCALL_64() in this case.

So, before this patch:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f/build/vmlinux
Percent│       pop    %r10
       │       pop    %r9
       │       pop    %r8
       │       pop    %rax
       │       pop    %rsi
       │       pop    %rdx
       │       pop    %rsi
       │       mov    %rsp,%rdi
       │       mov    %gs:0x5004,%rsp
       │       pushq  0x28(%rdi)
       │       pushq  (%rdi)
       │       push   %rax
       │     ↑ jmp    6c
       │       mov    %cr3,%rdi
       │     ↑ jmp    62
       │       mov    %rdi,%rax
       │       and    $0x7ff,%rdi
       │       bt     %rdi,%gs:0x2219a
       │     ↑ jae    53
       │       btr    %rdi,%gs:0x2219a
       │       mov    %rax,%rdi
       │     ↑ jmp    5b

After:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f/build/vmlinux
  0.65 │     → jne    swapgs_restore_regs_and_return_to_usermode
       │       pop    %r10
       │       pop    %r9
       │       pop    %r8
       │       pop    %rax
       │       pop    %rsi
       │       pop    %rdx
       │       pop    %rsi
       │       mov    %rsp,%rdi
       │       mov    %gs:0x5004,%rsp
       │       pushq  0x28(%rdi)
       │       pushq  (%rdi)
       │       push   %rax
       │     ↓ jmp    132
       │       mov    %cr3,%rdi
       │    ┌──jmp    128
       │    │  mov    %rdi,%rax
       │    │  and    $0x7ff,%rdi
       │    │  bt     %rdi,%gs:0x2219a
       │    │↓ jae    119
       │    │  btr    %rdi,%gs:0x2219a
       │    │  mov    %rax,%rdi
       │    │↓ jmp    121
       │119:│  mov    %rax,%rdi
       │    │  bts    $0x3f,%rdi
       │121:│  or     $0x800,%rdi
       │128:└─→or     $0x1000,%rdi
       │       mov    %rdi,%cr3
       │132:   pop    %rax
       │       pop    %rdi
       │       pop    %rsp
       │     → jmpq   *0x825d2d(%rip)        # ffffffff82225e88 <pv_cpu_ops+0xe8>

With those at least navigating to the right destination, an improvement
for these cases seems to be to be to somehow mark those inner functions,
which in this case could be:

entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f/build/vmlinux
       │syscall_return_via_sysret:
       │       pop    %r15
       │       pop    %r14
       │       pop    %r13
       │       pop    %r12
       │       pop    %rbp
       │       pop    %rbx
       │       pop    %rsi
       │       pop    %r10
       │       pop    %r9
       │       pop    %r8
       │       pop    %rax
       │       pop    %rsi
       │       pop    %rdx
       │       pop    %rsi
       │       mov    %rsp,%rdi
       │       mov    %gs:0x5004,%rsp
       │       pushq  0x28(%rdi)
       │       pushq  (%rdi)
       │       push   %rax
       │     ↓ jmp    132
       │       mov    %cr3,%rdi
       │    ┌──jmp    128
       │    │  mov    %rdi,%rax
       │    │  and    $0x7ff,%rdi
       │    │  bt     %rdi,%gs:0x2219a
       │    │↓ jae    119
       │    │  btr    %rdi,%gs:0x2219a
       │    │  mov    %rax,%rdi
       │    │↓ jmp    121
       │119:│  mov    %rax,%rdi
       │    │  bts    $0x3f,%rdi
       │121:│  or     $0x800,%rdi
       │128:└─→or     $0x1000,%rdi
       │       mov    %rdi,%cr3
       │132:   pop    %rax
       │       pop    %rdi
       │       pop    %rsp
       │     → jmpq   *0x825d2d(%rip)        # ffffffff82225e88 <pv_cpu_ops+0xe8>

This all gets much better viewed if one uses 'perf report --ignore-vmlinux'
forcing the usage of /proc/kcore + /proc/kallsyms, when the above
actually gets down to:

  # perf report --ignore-vmlinux
  ## do '/64', will show the function names containing '64',
  ## navigate to /entry_SYSCALL_64_after_hwframe.annotation,
  ## press 'A' to annotate, then 'P' to print that annotation
  ## to a file
  ## From another xterm (or see on screen, this 'P' thing is for
  ## getting rid of those right side scroll bars/spaces):
  # cat /entry_SYSCALL_64_after_hwframe.annotation
  entry_SYSCALL_64_after_hwframe() /proc/kcore
  Event: cycles:ppp

  Percent
              Disassembly of section load0:

              ffffffff9aa00044 <load0>:
   11.97        push   %rax
    4.85        push   %rdi
                push   %rsi
    2.59        push   %rdx
    2.27        push   %rcx
    0.32        pushq  $0xffffffffffffffda
    1.29        push   %r8
                xor    %r8d,%r8d
    1.62        push   %r9
    0.65        xor    %r9d,%r9d
    1.62        push   %r10
                xor    %r10d,%r10d
    5.50        push   %r11
                xor    %r11d,%r11d
    3.56        push   %rbx
                xor    %ebx,%ebx
    4.21        push   %rbp
                xor    %ebp,%ebp
    2.59        push   %r12
    0.97        xor    %r12d,%r12d
    3.24        push   %r13
                xor    %r13d,%r13d
    2.27        push   %r14
                xor    %r14d,%r14d
    4.21        push   %r15
                xor    %r15d,%r15d
    0.97        mov    %rsp,%rdi
    5.50      → callq  do_syscall_64
   14.56        mov    0x58(%rsp),%rcx
    7.44        mov    0x80(%rsp),%r11
    0.32        cmp    %rcx,%r11
              → jne    swapgs_restore_regs_and_return_to_usermode
    0.32        shl    $0x10,%rcx
    0.32        sar    $0x10,%rcx
    3.24        cmp    %rcx,%r11
              → jne    swapgs_restore_regs_and_return_to_usermode
    2.27        cmpq   $0x33,0x88(%rsp)
    1.29      → jne    swapgs_restore_regs_and_return_to_usermode
                mov    0x30(%rsp),%r11
    8.74        cmp    %r11,0x90(%rsp)
              → jne    swapgs_restore_regs_and_return_to_usermode
    0.32        test   $0x10100,%r11
              → jne    swapgs_restore_regs_and_return_to_usermode
    0.32        cmpq   $0x2b,0xa0(%rsp)
    0.65      → jne    swapgs_restore_regs_and_return_to_usermode

I.e. using kallsyms makes the function start/end be done differently
than using what is in the vmlinux ELF symtab and actually the hits
goes to entry_SYSCALL_64_after_hwframe, which is a GLOBAL() after the
start of entry_SYSCALL_64:

  ENTRY(entry_SYSCALL_64)
          UNWIND_HINT_EMPTY
  <SNIP>
          pushq   $__USER_CS                      /* pt_regs->cs */
          pushq   %rcx                            /* pt_regs->ip */
  GLOBAL(entry_SYSCALL_64_after_hwframe)
          pushq   %rax                            /* pt_regs->orig_ax */

          PUSH_AND_CLEAR_REGS rax=$-ENOSYS

And it goes and ends at:

          cmpq    $__USER_DS, SS(%rsp)            /* SS must match SYSRET */
          jne     swapgs_restore_regs_and_return_to_usermode

          /*
           * We win! This label is here just for ease of understanding
           * perf profiles. Nothing jumps here.
           */
  syscall_return_via_sysret:
          /* rcx and r11 are already restored (see code above) */
          UNWIND_HINT_EMPTY
          POP_REGS pop_rdi=0 skip_r11rcx=1

So perhaps some people should really just play with '--ignore-vmlinux'
to force /proc/kcore + kallsyms.

One idea is to do both, i.e. have a vmlinux annotation and a
kcore+kallsyms one, when possible, and even show the patched location,
etc.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-r11knxv8voesav31xokjiuo6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      980b68ec
    • A
      perf annotate: Defer searching for comma in raw line till it is needed · c448234c
      由 Arnaldo Carvalho de Melo 提交于 
      That strchr() in jump__scnprintf() needs to be nuked somehow, as it,
IIRC is already done in jump__parse() and if needed at scnprintf() time,
should be stashed in the struct filled in parse() time.

For now jus defer it to just before where it is used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-j0t5hagnphoz9xw07bh3ha3g@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c448234c
    • A
      perf annotate: Support jumping from one function to another · e4cc91b8
      由 Arnaldo Carvalho de Melo 提交于 
      For instance:

  entry_SYSCALL_64  /lib/modules/4.16.0-rc5-00086-gdf09348f/build/vmlinux
    5.50 │     → callq  do_syscall_64
   14.56 │       mov    0x58(%rsp),%rcx
    7.44 │       mov    0x80(%rsp),%r11
    0.32 │       cmp    %rcx,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       shl    $0x10,%rcx
    0.32 │       sar    $0x10,%rcx
    3.24 │       cmp    %rcx,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    2.27 │       cmpq   $0x33,0x88(%rsp)
    1.29 │     → jne    swapgs_restore_regs_and_return_to_usermode
         │       mov    0x30(%rsp),%r11
    8.74 │       cmp    %r11,0x90(%rsp)
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       test   $0x10100,%r11
         │     → jne    swapgs_restore_regs_and_return_to_usermode
    0.32 │       cmpq   $0x2b,0xa0(%rsp)
    0.65 │     → jne    swapgs_restore_regs_and_return_to_usermode

It'll behave just like a "call" instruction, i.e. press enter or right
arrow over one such line and the browser will navigate to the annotated
disassembly of that function, which when exited, via left arrow or esc,
will come back to the calling function.

Now to support jump to an offset on a different function...
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-78o508mqvr8inhj63ddtw7mo@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e4cc91b8
    • A
      perf annotate: Add "_local" to jump/offset validation routines · 2eff0611
      由 Arnaldo Carvalho de Melo 提交于 
      Because they all really check if we can access data structures/visual
constructs where a "jump" instruction targets code in the same function,
i.e. things like:

  __pthread_mutex_lock  /usr/lib64/libpthread-2.26.so
  1.95 │       mov    __pthread_force_elision,%ecx
       │    ┌──test   %ecx,%ecx
  0.07 │    ├──je     60
       │    │  test   $0x300,%esi
       │    │↓ jne    60
       │    │  or     $0x100,%esi
       │    │  mov    %esi,0x10(%rdi)
       │ 42:│  mov    %esi,%edx
       │    │  lea    0x16(%r8),%rsi
       │    │  mov    %r8,%rdi
       │    │  and    $0x80,%edx
       │    │  add    $0x8,%rsp
       │    │→ jmpq   __lll_lock_elision
       │    │  nop
  0.29 │ 60:└─→and    $0x80,%esi
  0.07 │       mov    $0x1,%edi
  0.29 │       xor    %eax,%eax
  2.53 │       lock   cmpxchg %edi,(%r8)

And not things like that "jmpq __lll_lock_elision", that instead should behave
like a "call" instruction and "jump" to the disassembly of "___lll_lock_elision".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-3cwx39u3h66dfw9xjrlt7ca2@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2eff0611
    • P
      perf python: Reference Py_None before returning it · 83428f2f
      由 Petr Machata 提交于 
      Python None objects are handled just like all the other objects with
respect to their reference counting. Before returning Py_None, its
reference count thus needs to be bumped.
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Machata <petrm@mellanox.com>
Link: http://lkml.kernel.org/r/b1e565ecccf68064d8d54f37db5d028dda8fa522.1521675563.git.petrm@mellanox.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      83428f2f
    • W
      x86/efi: Free efi_pgd with free_pages() · 06ace26f
      由 Waiman Long 提交于 
      The efi_pgd is allocated as PGD_ALLOCATION_ORDER pages and therefore must
also be freed as PGD_ALLOCATION_ORDER pages with free_pages().

Fixes: d9e9a641 ("x86/mm/pti: Allocate a separate user PGD")
Signed-off-by: NWaiman Long <longman@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1521746333-19593-1-git-send-email-longman@redhat.com
      06ace26f
    • L
      Merge tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips · 86d043d4
      由 Linus Torvalds 提交于 
      Pull MIPS fixes from James Hogan:
 "Another miscellaneous pile of MIPS fixes for 4.16:

   - lantiq: fixes for clocks and Amazon SE (4.14)

   - ralink: fix booting on MT7621 (4.5)

   - ralink: fix halt (3.9)"

* tag 'mips_fixes_4.16_5' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
  MIPS: ralink: Fix booting on MT7621
  MIPS: ralink: Remove ralink_halt()
  MIPS: lantiq: ase: Enable MFD_SYSCON
  MIPS: lantiq: Enable AHB Bus for USB
  MIPS: lantiq: Fix Danube USB clock
      86d043d4
    • L
      Merge tag 'vfio-v4.16-rc7' of git://github.com/awilliam/linux-vfio · 095fe49f
      由 Linus Torvalds 提交于 
      Pull VFIO fix from Alex Williamson:
 "Revert masking INTx where it cannot be enabled - it plays poorly with
  SR-IOV VFs and presumes DisINTx support"

* tag 'vfio-v4.16-rc7' of git://github.com/awilliam/linux-vfio:
  Revert: "vfio-pci: Mask INTx if a device is not capabable of enabling it"
      095fe49f