QP and SRQ objects are stored in different containers so the action to get
and lock a common resource during ODP event needs to address that.

While here get rid of 'refcount' and 'free' fields in mlx5_core_srq struct
and use the fields with same semantics in common structure.

Fixes: 032080ab ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_v2_qp_flow_control_init':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:4384:33: warning:
 variable 'rst' set but not used [-Wunused-but-set-variable]

It never used since introduction.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

As preparation to hide rdma_restrack_root, refactor the code to use the
ops structure instead of a special callback which is hidden in
rdma_restrack_root.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When a given netdev of the GID entry is macvlan netdevice, and if the
lower netdevice is vlan device, GID entry for macvlan based IP address
needs to inherit the vlan of the lower netdevice.

Therefore, attempt to find out if the lower device exist and if so, if
it is vlan device and setup the vlan tag correctly.
Signed-off-by: NParav Pandit <parav@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Reviewed-by: NYuval Avnery <yuvalav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Lack of mandatory verbs no longer fail device registration, the device
will be marked as a non-kverbs provider.
Signed-off-by: NGal Pressman <galpress@amazon.com>
Tested-by: NParvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

All callers to ib_alloc_device() provide a larger size than struct
ib_device and rely on the fact that struct ib_device is embedded in their
driver specific structure as the first member.

Provide a safer variant of ib_alloc_device() that checks and enforces this
approach to make sure the drivers are using it right.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove 'del_mkey' variable that is set but not used.

Fixes: 534fd7aa ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The function mlx5_ib_stage_odp_cleanup() is only used in main.c

Fixes: d5d284b8 ("{net,IB}/mlx5: Move Page fault EQ and ODP logic to RDMA")
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Several locations for manipulating sges use an open coded sequence
that is covered by helper functions.

Use the appropriate helper functions.
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Sge sizing is done in several places using an open coded method.

This can cause maintenance issues.  The open coded method is
encapsulated in a helper routine.  The helper was introduced with
commit:

1198fcea ("IB/hfi1, rdmavt: Move SGE state helper routines into
rdmavt")

Update all call sites that have the open coded path with the helper
routine.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMichael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update the driver to use the new device capability to report 64-bit UAR
PFNs.
Reviewed-by: NJorgen Hansen <jhansen@vmware.com>
Signed-off-by: NAdit Ranadive <aditr@vmware.com>
Reviewed-by: NVishnu Dasa <vdasa@vmware.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Implement DEVX hot unplug for the async command FD.

This is done by managing a list of the inflight commands and wait until
all launched work is completed as part of
devx_hot_unplug_async_cmd_event_file.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Implement the file ops of the DEVX async command FD, this enables using
the FD for reading the events and manage other options on the FD.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce async DEVX obj query API to get the command response back to
user space once it's ready without blocking when calling the firmware.

The event's data includes a header with some meta data then the firmware
output command data.

The header includes:
- The input 'wr_id' to let application recognizing the response.

The input FD attribute is used to have the event data ready on.
Downstream patches from this series will implement the file ops to let
application read it.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce MLX5_IB_OBJECT_DEVX_ASYNC_CMD_FD and its initial implementation.

This object is from type class FD and will be used to read DEVX async
commands completion.

The core layer should allow the driver to set object from type FD in a
safe mode, this option was added with a matching comment in place.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Currently, the Kbuild core manipulates header search paths in a crazy
way [1].

To fix this mess, I want all Makefiles to add explicit $(srctree)/ to
the search paths in the srctree. Some Makefiles are already written in
that way, but not all. The goal of this work is to make the notation
consistent, and finally get rid of the gross hacks.

Having whitespaces after -I does not matter since commit 48f6e3cf
("kbuild: do not drop -I without parameter").

[1]: https://patchwork.kernel.org/patch/9632347/Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NParvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Similar to the core change commit 5f1d43de ("IB/core: disable memory
registration of filesystem-dax vmas")

PSM should be prevented from using filesystem DAX pages.
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds qpc timer and cqc timer allocation support for hardware
timeout retransmission in kernel space driver.
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds SCC context clear support for DCQCN in kernel space
driver.
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch adds SCC context allocation and initialization support for
DCQCN in kernel space driver.
Signed-off-by: NYangyang Li <liyangyang20@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A sub-range in ODP implicit MR should take its write permission from the
MR and not be set always to allow.

Fixes: d07d1d70 ("IB/umem: Update on demand page (ODP) support")
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no reason for this __GFP_NOFAIL, none of the other routines in
this file use it, and there is an error unwind here. NOFAIL should be
reserved for special cases, not used by network drivers.

Fixes: 6a0b6174 ("rdma/cxgb4: Add support for kernel mode SRQ's")
Reported-by: NNicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch avoids that sparse complains about missing function
declarations.

Fixes: c9990ab3 ("RDMA/umem: Move all the ODP related stuff out of ucontext and into per_mm")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NParvi Kaustubhi <pkaustub@cisco.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The macro was just making things harder to follow, and audit, so remove
it and call debugfs_create_file() directly.  Also, the macro did not
need to warn about the call failing as no one should ever care about any
debugfs functions failing.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When calling debugfs functions, there is no need to ever check the
return value.  The function can work or not, but the code logic should
never do something different based on this.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

APIs that have deferred callbacks should have some kind of cleanup
function that callers can use to fence the callbacks. Otherwise things
like module unloading can lead to dangling function pointers, or worse.

The IB MR code is the only place that calls this function and had a
really poor attempt at creating this fence. Provide a good version in
the core code as future patches will add more places that need this
fence.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Two flow specifications can set the ip protocol field in
the flow table entry:

1) IB_FLOW_SPEC_TCP/UDP/GRE - set the ip protocol accordingly.
2) IB_FLOW_SPEC_IPV4/6 - has ip_protocol field for users
who want to receive specific L4 packets.

We need to avoid overriding of the ip_protocol with zeros,
in case that the user first put the L4 specification and
only then the L3.

Fixes: ca0d4753 ('IB/mlx5: Add support in TOS and protocol to flow steering')
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for ODP for DEVX indirection mkey, it includes:
- Recognizing its type as part of the radix tree lookup.
- Use similar flow as done for the MW MKEY type.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Manage indirection mkey upon DEVX flow to support ODP.

To support a page fault event on the indirection mkey it needs to be part
of the device mkey radix tree.

Both the creation and the deletion flows for a DEVX object which is
indirection mkey were adapted to handle that.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Once an indirection MKEY is created umem valid bit shouldn't be set as
this MKEY doesn't really hold a umem.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

AEQ overflow will be reported by hardware when too many asynchronous
events occurred but not be handled in time.  Normally, AEQ overflow error
is not easy to occur. Once happened, we have to do physical function reset
to recover.  PF reset is implemented in two steps. Firstly, set reset
level with ae_dev->ops->set_default_reset_request.  Secondly, run reset
with ae_dev->ops->reset_event.
Signed-off-by: NXiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove unneeded semicolons.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_srq':
drivers/infiniband/hw/qedr/verbs.c:1436:22: warning:
 variable 'ib_ctx' set but not used [-Wunused-but-set-variable]

drivers/infiniband/hw/qedr/verbs.c: In function 'qedr_create_user_qp':
drivers/infiniband/hw/qedr/verbs.c:1701:22: warning:
 variable 'ib_ctx' set but not used [-Wunused-but-set-variable]

Fixes: b0ea0fa5 ("IB/{core,hw}: Have ib_umem_get extract the ib_ucontext from ib_udata")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When flush cqe, it needs to get the pointer of rq and sq from db address
space of user and update it into qp context by modified qp. if rq does not
exist, it will not get the value from db address space of user.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Replace kzalloc() function with its 2-factor argument form, kcalloc().

This patch replaces cases of:

	kzalloc(a * b, gfp)

with:
	kcalloc(a, b, gfp)

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>