speed up update_load_add/_sub() by not delaying the division - this
reduces CPU pipeline dependencies.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

suggested by Roman Zippel: uninline __enqueue_entity() and
__dequeue_entity().

this reduces code size:

      text    data     bss     dec     hex filename
     25385    2386      16   27787    6c8b sched.o.before
     25257    2386      16   27659    6c0b sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Peter Zijlstra suggested to simplify SCHED_FEAT_* checks via the
sched_feat(x) macro.

No code changed:

   text    data     bss     dec     hex filename
   38895    3550      24   42469    a5e5 sched.o.before
   38895    3550      24   42469    a5e5 sched.o.after
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

cleanup: simplify cfs_rq_curr() methods - now that the cfs_rq->curr
pointer is unconditionally present, remove the wrappers.

  kernel/sched.o:
      text    data     bss     dec     hex filename
     11784     224    2012   14020    36c4 sched.o.before
     11784     224    2012   14020    36c4 sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Noticed by Roman Zippel: use cfs_rq->curr in the !group-scheduling
case too. Small micro-optimization and cleanup effect:

   text    data     bss     dec     hex filename
   36269    3482      24   39775    9b5f sched.o.before
   36177    3486      24   39687    9b07 sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

continued removal of precise CPU load calculations.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

CPU load calculations are statistical anyway, and there's little benefit
from having it calculated on every scheduling event. So remove this code,
it gets rid of a divide from the scheduler wakeup and context-switch
fastpath.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

remove the stat_gran code - it was disabled by default and it causes
unnecessary overhead.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

use constants if !CONFIG_SCHED_DEBUG.

this speeds up the code and reduces code-size:

    text    data     bss     dec     hex filename
   27464    3014      16   30494    771e sched.o.before
   26929    3010      20   29959    7507 sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

use the same defaults on both UP and SMP.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

track the maximum amount of time a task has executed while
the CPU load was at least 2x. (i.e. at least two nice-0
tasks were runnable)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

small kernel/sched_debug.c cleanup - break up
multi-variable assignment.

no code changed:

   text    data     bss     dec     hex filename
   38869    3550      24   42443    a5cb sched.o.before
   38869    3550      24   42443    a5cb sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Use list_for_each_entry_safe() instead of list_for_each_safe() in
__wake_up_common()
Signed-off-by: NMatthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

to get full child-runs-first semantics make sure the parent is
rescheduled.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

fix the sched_child_runs_first flag: always call into ->task_new()
if we are on the same CPU, as SCHED_OTHER tasks depend on it for
correct initial setup.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NMike Galbraith <efault@gmx.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Make sure the mmc_spi driver can build without CONFIG_BLOCK.
Issue noted by "Avuton Olrich" <avuton@gmail.com> and randconfig.

While that won't be a common configuration, sometimes embedded
boards use SDIO to interface WLAN or Bluetooth chips (vs some
parallel interface), and don't provide an MMC/SD socket for use
with flash memory cards.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-x86:
  x86: force timer broadcast on late AMD C1E detection
  x86: move local APIC timer init to the end of start_secondary()
  clockevents: introduce force broadcast notifier
  x86: fix missing include for vsyscall

The call to napi_disable() in the PCI shutdown handler is problematic,
and is aggravated by the new NAPI.
Also, make sure watchdog timer doesn't go off.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The 64bit SMP bootup is slightly different to the 32bit one. It enables
the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E
systems have the C1E feature flag only set in the secondary CPU. Due to
the early enable of the boot CPU local APIC timer the APIC timer is
registered as a fully functional device. When we detect the wreckage during
the bringup of the secondary CPU, we need to force the boot CPU into
broadcast mode. 

Check the C1E caused APIC timer disable, when the secondary APIC timer is
initialized. If the boot CPU APIC timer was registered as a functional
clock event device, then fix this up and utilize the
CLOCK_EVT_NOTIFY_BROADCAST_FORCE mechanism to force the already
registered boot CPU APIC timer into broadcast mode.

Tested by force injecting the failure mode.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Preparatory patch for the AMD C1E wreckage fixup.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The 64bit SMP bootup is slightly different to the 32bit one. It enables
the boot CPU local APIC timer before all CPUs are brought up. Some AMD C1E
systems have the C1E feature flag only set in the secondary CPU. Due to
the early enable of the boot CPU local APIC timer the APIC timer is
registered as a fully functional device. When we detect the wreckage during
the bringup of the secondary CPU, we need to force the boot CPU into
broadcast mode. 

Add a new notifier reason and implement the force broadcast in the clock
events layer.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

 > Maybe I just picked a bad time to try, but...
 > 
 > arch/x86/kernel/alternative.c: In function 'apply_alternatives':
 > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_START' undeclared (first use in this function)
 > arch/x86/kernel/alternative.c:191: error: (Each undeclared identifier is reported only once
 > arch/x86/kernel/alternative.c:191: error: for each function it appears in.)
 > arch/x86/kernel/alternative.c:191: error: 'VSYSCALL_END' undeclared (first use in this function)
 > make[1]: *** [arch/x86/kernel/alternative.o] Error 1
 > make: *** [arch/x86/kernel] Error 2

Try this.

Include missing header for vsyscall.
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (53 commits)
  hwmon: (vt8231) fix sparse warning
  hwmon: (sis5595) fix sparse warning
  hwmon: (w83627hf) don't assume bank 0
  hwmon: (w83627hf) Fix setting fan min right after driver load
  hwmon: (w83627hf) De-macro sysfs callback functions
  hwmon: Add new combined driver for FSC chips
  hwmon: (ibmpex) Release IPMI user if hwmon registration fails
  hwmon: (dme1737) Add sch311x support
  hwmon: (dme1737) group functions logically
  hwmon: (dme1737) cleanups
  hwmon: IBM power meter driver
  hwmon: (coretemp) Add support for Celeron 4xx
  hwmon: (lm87) Disable VID when it should be
  hwmon: (w83781d) Add individual alarm and beep files
  hwmon: VRM is not read from registers
  MAINTAINERS: update hwmon subsystem git trees
  hwmon: Fix the code examples in documentation
  hwmon: update sysfs interface document - error handling
  hwmon: (thmc50) Fix a debug message
  hwmon: (thmc50) Don't create temp3 if not enabled
  ...

- killed paranoid NULL Pointer check
- human readable LED states
- support for "Eicon DIVA USB 4.0" (0x071d/0x1005)
Signed-off-by: NMartin Bachem <info@colognechip.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

if your mask is host-endian, you should apply it after le64_to_cpu();
if it's little-endian - before.  Doing both (for the same mask and
little-endian value) is broken.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

all uses of and almost all assignments to lro_desc->tcp_ack assume that it's
net-endian; one converts net-endian to host-endian and sticks it in
lro_desc->tcp_ack.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

... should be unsigned int
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

deal with signedness of the stuff passed to set_bit() et.al.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>