Input device must be allocated (but not necessarily registered) before
requesting IRQs, otherwise there is a chance that IRQ handler fires and
tries to reference not yet allocated input device.

Also it makes sense to store relative IRQ numbers in max8925_onkey_info
structure as they are needed in suspend/resume which we expect to be
called more often than probe and remove.
Acked-by: NHaojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Implement suspend and resume methods to set up devices as wakeup source.
Signed-off-by: NKevin Liu <kliu5@marvell.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This allows creating proper sysfs link between driver and its module.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Since Cypress TTSP driver was merged in mainline, add a maintainer
entry for it.
Signed-off-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This fixes reference-before-check problem; there is no reason to check
if caller passed NULL dev or bus_ops as it is done only by bus-specific
drivers which already do the right thing.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The Data Modul TP 72037 EasyTouch controller is derived from EGALAX
controller and is capable of detecting dual contacts. Packets can be 5
bytes or 10 bytes long, depending whether one or two contacts are
detected. Format is same as EGALAX touch controller, but with x and y
coordinates inverted.
Signed-off-by: NArmando Visconti <armando.visconti@st.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDaniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

On-key Driver for Dialog Semiconductor DA9052/53 PMICs.
Signed-off-by: NDavid Dajun Chen <dchen@diasemi.com>
Signed-off-by: NAshish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds support for TI's touchscreen
controller for a 4/5/8 wire resistive panel
that is directly fed to the ADC.

This touchscreen controller will be part of
AM335x TI SoC. The TRM can be found at:
http://www.ti.com/lit/ug/spruh73a/spruh73a.pdfSigned-off-by: NPatil, Rachna <rachna@ti.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Thaw and poweroff routines are missing for spear-keyboard. They are
required for:
- Error case scenarios during freeze
- Using test features, of hibernate.
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Let platform pass mode information to keyboard driver according to which
it configures itself. The mode can be
 - KEYPAD_9x9     0
 - KEYPAD_6x6     1
 - KEYPAD_2x2     2
Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add 6x6 keypad matrix and rename 9x9 keymap
Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Make use of psmouse_activate() and psmouse_deactivate() from psmouse-base.c
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Other drivers duplicate this code; no sense in having it be private
to psmouse-base.
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Allow marking some of GPIO pins as ignored to to avoid continuously
generating KBC input events.
Signed-off-by: NShridhar Rasal <srasal@nvidia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds a driver for Synaptics USB touchpad or pointing stick
devices. These USB devices emulate an USB mouse by default, so one can
also use the usbhid driver. However, in combination with special user
space drivers this kernel driver allows one to customize the behaviour
of the device.

An extended version of this driver with support for the cPad background
display can be found at
<http://jan-steinhoff.de/linux/synaptics-usb.html>.
Signed-off-by: NJan Steinhoff <mail@jan-steinhoff.de>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

As noted by Arve and others, since wall time can jump backwards, it is
difficult to use for input because one cannot determine if one event
occurred before another or for how long a key was pressed.

However, the timestamp field is part of the kernel ABI, and cannot be
changed without possibly breaking existing users.

This patch adds a new IOCTL that allows a clockid to be set in the
evdev_client struct that will specify which time base to use for event
timestamps (ie: CLOCK_MONOTONIC instead of CLOCK_REALTIME).

For now we only support CLOCK_MONOTONIC and CLOCK_REALTIME, but
in the future we could support other clockids if appropriate.

The default remains CLOCK_REALTIME, so we don't change the ABI.
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Reviewed-by: NDaniel Kurtz <djkurtz@google.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Cypress TrueTouch(tm) Standard Product controllers are found in
a wide range of embedded devices. This driver add support for a
variety of TTSP controllers.

Since the hardware is capable of tracking identifiable contacts, multi-touch
protocol type B (stateful) is used to report contact information.

The driver is composed of a core driver that process the data sent by
the contacts and a set of bus specific interface modules. This patch
adds the base core TTSP driver.
Signed-off-by: NJavier Martinez Canillas <javier@dowhile0.org>
Reviewed-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

And add two new data formats.
Tested-by: NChris Bagwell <chris@cnpbagwell.com>
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Tested-by: NChris Bagwell <chris@cnpbagwell.com>
Reviewed-by: NChris Bagwell <chris@cnpbagwell.com>
Signed-off-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Correct spelling "connetced" to "connected" in pcf8574_keypad
description in drivers/input/misc/Kconfig.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Enable keypress interrupt to support wakeup from low power state.
Signed-off-by: NRakesh Iyer <riyer@nvidia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add support for Tegra30 by correcting definitions. This is necessary to
make driver useful in Tegra30.
Signed-off-by: NRakesh Iyer <riyer@nvidia.com>
Acked-by: NStephen Warren: <swarren@nvidia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

We don't actually care if the device has been runtime suspended immediately
so we can just drop the reference without waiting for any state change to
be implemented. This may allow us to avoid some suspend/resume cycles and
is a bit more friendly to the rest of the system.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Convert the driver to standard spilt model arch-specific code registers
platform device to which driver code can bind later.

Also request IRQ immediately upon binding to the device instead of doing
this when serio port is being opened.
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Convert driver to use dev_pm_ops instead of legacy PM infrastructure.
Also make 'open' a bool since it is really a boolean.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also proper guard for system suspend/resume methods is CONFIG_PM_SLEEP,
not CONFIG_PM.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Because we are using platform_device_probe() to register the driver
we do not need to assign driver's probe method. We also can mark
ske_keypad_probe(), together with ske_keypad_chip_init(), as __init
instead of __devinit.
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This adds two missing kerneldoc entries for the TC3589x
keypad driver.
Signed-off-by: NNaga Radhesh <naga.radheshy@stericsson.com>
Reviewed-by: NSrinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Instead of manually create and handler kernel thread switch to threaded
IRQ and let kernel IRQ core manage thread for us.
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Let compiler figure out which ones makes most sense to inline.
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add __devinit/__devexit sections annotations so parts of code could be
discarded after completing driver initialization.
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

So that it has proper symlink to the containing module in sysfs.
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Instead of using legacy PM interfaces switch to using dev_pm_ops.
Acked-by: NMarek Vasut <marek.vasut@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Several protocol initialization routines can fail after they set up
psmouse methods, such as reconnect and disconnect. This may lead to
these stale methods used with different protocol that they were
intended to be used for and may cause unpredictavle behavior and/or
crashes.

Make sure we start with a clean slate before executing each and every
protocol detection and/or initialization routine.
Reported-by: NPaul Fox <pgf@laptop.org>
Acked-by: NTai-hwa Liang <avatar@sentelic.com>
Acked-by: NPaul Fox <pgf@laptop.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

If there is a full packet in the buffer, and we overflow that buffer
right after checking for that condition, it would have been possible
for us to block indefinitely (rather, until the next full packet) even if
the file was marked as O_NONBLOCK.

Cc: Jeff Brown <jeffbrown@android.com>
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Without this, it was possible for the reader to get ahead of packet_head.
If the input device generated a partial packet *right* after the reader
got ahead, then we can get into a situation where the device is marked
readable, but read always returns 0 until the next packet is finished
(i.e a SYN is generated by the input driver).

This situation can also happen if we overflow the buffer while a reader
is trying to read an event out.
Signed-off-by: NDima Zavin <dima@android.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>