Add the requisite arch specific Kconfig options to enable the use of the
sparsemem implementation for NUMA kernels on x86-64.
Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch pulls out all remaining direct references to contig_page_data
from arch/x86-64, thus saving an ifdef in one case.
Signed-off-by: NMatt Tolentino <matthew.e.tolentino@intel.com>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide the architecture specific implementation for SPARSEMEM for PPC64
systems.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> (in part)
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide hooks for PPC64 to allow memory models to be informed of installed
memory areas.  This allows SPARSEMEM to instantiate mem_map for the populated
areas.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide an implementation of early_pfn_to_nid for PPC64.  This is used by
memory models to determine the node from which to take allocations before the
memory allocators are fully initialised.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make sparse's initalization be accessible at runtime.  This allows sparse
mappings to be created after boot in a hotplug situation.

This patch is separated from the previous one just to give an indication how
much of the sparse infrastructure is *just* for hotplug memory.

The section_mem_map doesn't really store a pointer.  It stores something that
is convenient to do some math against to get a pointer.  It isn't valid to
just do *section_mem_map, so I don't think it should be stored as a pointer.

There are a couple of things I'd like to store about a section.  First of all,
the fact that it is !NULL does not mean that it is present.  There could be
such a combination where section_mem_map *is* NULL, but the math gets you
properly to a real mem_map.  So, I don't think that check is safe.

Since we're storing 32-bit-aligned structures, we have a few bits in the
bottom of the pointer to play with.  Use one bit to encode whether there's
really a mem_map there, and the other one to tell whether there's a valid
section there.  We need to distinguish between the two because sometimes
there's a gap between when a section is discovered to be present and when we
can get the mem_map for it.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NJack Steiner <steiner@sgi.com>
Signed-off-by: NBob Picco <bob.picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The part of the sparsemem patch which modifies memmap_init_zone() has recently
become a problem.  It changes behavior so that there is a call to
pfn_to_page() for each individual page inside of a node's range:
node_start_pfn through node_end_pfn.  It used to simply do this once, at the
beginning of the node, but having sparsemem's non-contiguous mem_map[]s inside
of a node made it necessary to change.

Mike Kravetz recently wrote a patch which made the NUMA code accept some new
kinds of layouts.  The system's memory was laid out like this, with node 0's
memory in two pieces: one before and one after node 1's memory:

	Node 0: +++++     +++++
	Node 1:      +++++

Previous behavior before Mike's patch was to assign nodes like this:

	Node 0: 00000     XXXXX
	Node 1:      11111

Where the 'X' areas were simply thrown away.  The new behavior was to make the
pg_data_t span node 0 across all of its areas, including areas that are really
node 1's: Node 0: 000000000000000 Node 1: 11111

This wastes a little bit of mem_map space, but ends up being OK, and more
fully utilizes the system's memory.  memmap_init_zone() initializes all of the
"struct page"s for node 0, even for the "hole", but those never get used,
because there is no pfn_to_page() that resolves to those pages.  However, only
calling pfn_to_page() once, memmap_init_zone() always uses the pages that were
allocated for node0->node_mem_map because:

	struct page *start = pfn_to_page(start_pfn);
	// effectively start = &node->node_mem_map[0]
	for (page = start; page < (start + size); page++) {
		init_page_here();...
		page++;
	}

Slow, and wasteful, but generally harmless.

But, modify that to call pfn_to_page() for each loop iteration (like sparsemem
does):

	for (pfn = start_pfn; pfn < < (start_pfn + size); pfn++++) {
		page = pfn_to_page(pfn);
	}

And you end up trying to initialize node 1's pages too early, along with bogus
data from node 0.  This patch checks for those weird layouts and declines to
touch the pages, making the more frequent pfn_to_page() calls OK to do.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide the architecture specific implementation for SPARSEMEM for i386 SMP
and NUMA systems.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sparsemem abstracts the use of discontiguous mem_maps[].  This kind of
mem_map[] is needed by discontiguous memory machines (like in the old
CONFIG_DISCONTIGMEM case) as well as memory hotplug systems.  Sparsemem
replaces DISCONTIGMEM when enabled, and it is hoped that it can eventually
become a complete replacement.

A significant advantage over DISCONTIGMEM is that it's completely separated
from CONFIG_NUMA.  When producing this patch, it became apparent in that NUMA
and DISCONTIG are often confused.

Another advantage is that sparse doesn't require each NUMA node's ranges to be
contiguous.  It can handle overlapping ranges between nodes with no problems,
where DISCONTIGMEM currently throws away that memory.

Sparsemem uses an array to provide different pfn_to_page() translations for
each SECTION_SIZE area of physical memory.  This is what allows the mem_map[]
to be chopped up.

In order to do quick pfn_to_page() operations, the section number of the page
is encoded in page->flags.  Part of the sparsemem infrastructure enables
sharing of these bits more dynamically (at compile-time) between the
page_zone() and sparsemem operations.  However, on 32-bit architectures, the
number of bits is quite limited, and may require growing the size of the
page->flags type in certain conditions.  Several things might force this to
occur: a decrease in the SECTION_SIZE (if you want to hotplug smaller areas of
memory), an increase in the physical address space, or an increase in the
number of used page->flags.

One thing to note is that, once sparsemem is present, the NUMA node
information no longer needs to be stored in the page->flags.  It might provide
speed increases on certain platforms and will be stored there if there is
room.  But, if out of room, an alternate (theoretically slower) mechanism is
used.

This patch introduces CONFIG_FLATMEM.  It is used in almost all cases where
there used to be an #ifndef DISCONTIG, because SPARSEMEM and DISCONTIGMEM
often have to compile out the same areas of code.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NYasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: NBob Picco <bob.picco@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allow architectures to indicate that they will be providing hooks to indice
installed memory areas, memory_present().  Provide prototypes for the i386
implementation.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Provide a default implementation for early_pfn_to_nid returning node 0.  Allow
architectures to override this with their own implementation out of
asm/mmzone.h.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMartin Bligh <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch changes some of the default behavior in the ppc64 Kconfig file
that was recently changed/added to 2.6.12-rc2-mm1 by Dave Hansen in
preparation for SPARSEMEM.  Patch allows the display of both FLAT and
DISCONTIG models on pseries.  As before, default is DISCONTIG for SMP and
PSERIES and FLAT for others.
Signed-off-by: NMike Kravetz <kravetz@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This gives DISCONTIGMEM a bit more help text to explain what it does, not just
when to choose it.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I got some feedback from users who think that the new "Memory Model" menu is a
little invasive.  This patch will hide that menu, except when
CONFIG_EXPERIMENTAL is enabled *or* when an individual architecture wants it.

An individual arch may want to enable it because they've removed their
arch-specific DISCONTIG prompt in favor of the mm/Kconfig one.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This used to be used to disable FLATMEM selection, but I decided to change it
to be done generically when DISCONTIG is enabled.  The option is unused, so
this kills it.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following patch applies on top of 2.6.12-rc2-mm1.  It fixes a minor
user interaction issue, and an early reference to SPARSEMEM.

This "choice" menu would always default to FLATMEM, as it was listed first.
 Move it to the end so that the other defaults have a chance first.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is some confusion that arose when working on SPARSEMEM patch between
what is needed for DISCONTIG vs. NUMA.

Multiple pg_data_t's are needed for DISCONTIGMEM or NUMA, independently.
All of the current NUMA implementations require an implementation of
DISCONTIG.  Because of this, quite a lot of code which is really needed for
NUMA is actually under DISCONTIG #ifdefs.  For SPARSEMEM, we changed some
of these #ifdefs to CONFIG_NUMA, but that broke the DISCONTIG=y and NUMA=n
case.

Introducing this new NEED_MULTIPLE_NODES config option allows code that is
needed for both NUMA or DISCONTIG to be separated out from code that is
specific to DISCONTIG.

One great advantage of this approach is that it doesn't require every
architecture to be converted over.  All of the current implementations
should "just work", only the ones implementing SPARSEMEM will have to be
fixed up.

The change to free_area_init() makes it work inside, or out of the new
config option.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This will at least suppress one prompt that users would have received the
first time they compile with the new DISCONTIG arch option.  They'll still
get the "Memory Model" prompt, but 99% of them will have the default work
there.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For all architectures, this just means that you'll see a "Memory Model"
choice in your architecture menu.  For those that implement DISCONTIGMEM,
you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool
y" and make your users select DISCONTIGMEM right out of the new choice
menu.  The only disadvantage might be if you have some specific things that
you need in your help option to explain something about DISCONTIGMEM.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

With sparsemem being introduced, we need a central place for new
memory-related .config options: mm/Kconfig.  This allows us to remove many
of the duplicated arch-specific options.

The new option, CONFIG_FLATMEM, is there to enable us to detangle NUMA and
DISCONTIGMEM.  This is a requirement for sparsemem because sparsemem uses
the NUMA code without the presence of DISCONTIGMEM.  The sparsemem patches
use CONFIG_FLATMEM in generic code, so this patch is a requirement before
applying them.

Almost all places that used to do '#ifndef CONFIG_DISCONTIGMEM' should use
'#ifdef CONFIG_FLATMEM' instead.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

discontig.c has some assumptions that mem_map[]s inside of a node are
contiguous.  Teach it to make sure that each region that it's bringing online
is actually made up of valid ranges of ram.
Written-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Generify the value fields in the page_flags.  The aim is to allow the location
and size of these fields to be varied.  Additionally we want to move away from
fixed allocations per field whilst still enforcing the overall bit utilisation
limits.  We rely on the compiler to spot and optimise the accessor functions.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce a simple allocator for the NUMA remap space.  This space is very
scarce, used for structures which are best allocated node local.

This mechanism is also used on non-NUMA ia64 systems with a vmem_map to keep
the pgdat->node_mem_map initialized in a consistent place for all
architectures.

Issues:
o alloc_remap takes a node_id where we might expect a pgdat which was intended
  to allow us to allocate the pgdat's using this mechanism; which we do not yet
  do.  Could have alloc_remap_node() and alloc_remap_nid() for this purpose.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The following four patches provide the last needed changes before the
introduction of sparsemem.  For a more complete description of what this
will do, please see this patch:

http://www.sr71.net/patches/2.6.11/2.6.11-bk7-mhp1/broken-out/B-sparse-150-sparsemem.patch

or previous posts on the subject:
http://marc.theaimsgroup.com/?t=110868540700001&r=1&w=2
http://marc.theaimsgroup.com/?l=linux-mm&m=109897373315016&w=2

Three of these are i386-only, but one of them reorganizes the macros
used to manage the space in page->flags, and will affect all platforms.
There are analogous patches to the i386 ones for ppc64, ia64, and
x86_64, but those will be submitted by the normal arch maintainers.

The combination of the four patches has been test-booted on a variety of
i386 hardware, and compiled for ppc64, i386, and x86-64 with about 17
different .configs.  It's also been runtime-tested on ia64 configs (with
more patches on top).

This patch:

We _know_ which node pages in general belong to, at least at a very gross
level in node_{start,end}_pfn[].  Use those to target the allocations of
pages.
Signed-off-by: NAndy Whitcroft <apw@shadowen.org>
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch effectively eliminates direct use of pgdat->node_mem_map outside
of the DISCONTIG code.  On a flat memory system, these fields aren't
currently used, neither are they on a sparsemem system.

There was also a node_mem_map(nid) macro on many architectures.  Its use
along with the use of ->node_mem_map itself was not consistent.  It has
been removed in favor of two new, more explicit, arch-independent macros:

	pgdat_page_nr(pgdat, pagenr)
	nid_page_nr(nid, pagenr)

I called them "pgdat" and "nid" because we overload the term "node" to mean
"NUMA node", "DISCONTIG node" or "pg_data_t" in very confusing ways.  I
believe the newer names are much clearer.

These macros can be overridden in the sparsemem case with a theoretically
slower operation using node_start_pfn and pfn_to_page(), instead.  We could
make this the only behavior if people want, but I don't want to change too
much at once.  One thing at a time.

This patch removes more code than it adds.

Compile tested on alpha, alpha discontig, arm, arm-discontig, i386, i386
generic, NUMAQ, Summit, ppc64, ppc64 discontig, and x86_64.  Full list
here: http://sr71.net/patches/2.6.12/2.6.12-rc1-mhp2/configs/

Boot tested on NUMAQ, x86 SMP and ppc64 power4/5 LPARs.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NMartin J. Bligh <mbligh@aracnet.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes an obvious and nasty bug where we could exit the transmit
routine while holding tx_lock.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>

Don't error out if something "bad" happens when trying to bind a driver to a
device.  We want the sysfs attributes to be present for later when we try to
tear down the device.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Drivers need to return -ENODEV when they can't bind to a device.
Anything else stops the "bind a device to a driver" search.

From: Stelian Pop <stelian@popies.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Use ssleep() / msleep() [as appropriate]
instead of schedule_timeout() to guarantee the task delays as expected.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NArnaldo Carvalho de Melo <acme@conectiva.com.br>
Signed-off-by: NMaximilian Attems <janitor@sternwelten.at>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch is a follow up to patch 1 regarding "Selective Sub Address
matching with call user data".  It allows use of the Fast-Select-Acceptance
optional user facility for X.25.

This patch just implements fast select with no restriction on response
(NRR).  What this means (according to ITU-T Recomendation 10/96 section
6.16) is that if in an incoming call packet, the relevant facility bits are
set for fast-select-NRR, then the called DTE can issue a direct response to
the incoming packet using a call-accepted packet that contains
call-user-data.  This patch allows such a response.  

The called DTE can also respond with a clear-request packet that contains
call-user-data.  However, this feature is currently not implemented by the
patch.

How is Fast Select Acceptance used?
By default, the system does not allow fast select acceptance (as before).
To enable a response to fast select acceptance,  
After a listen socket in created and bound as follows
	socket(AF_X25, SOCK_SEQPACKET, 0);
	bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr));
but before a listen system call is made, the following ioctl should be used.
	ioctl(call_soc,SIOCX25CALLACCPTAPPRV);
Now the listen system call can be made
	listen(call_soc, 4);
After this, an incoming-call packet will be accepted, but no call-accepted 
packet will be sent back until the following system call is made on the socket
that accepts the call
	ioctl(vc_soc,SIOCX25SENDCALLACCPT);
The network (or cisco xot router used for testing here) will allow the 
application server's call-user-data in the call-accepted packet, 
provided the call-request was made with Fast-select NRR.
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Shaun Pereira <spereira@tusc.com.au>

This is the first (independent of the second) patch of two that I am
working on with x25 on linux (tested with xot on a cisco router).  Details
are as follows.

Current state of module:

A server using the current implementation (2.6.11.7) of the x25 module will
accept a call request/ incoming call packet at the listening x.25 address,
from all callers to that address, as long as NO call user data is present
in the packet header.

If the server needs to choose to accept a particular call request/ incoming
call packet arriving at its listening x25 address, then the kernel has to
allow a match of call user data present in the call request packet with its
own.  This is required when multiple servers listen at the same x25 address
and device interface.  The kernel currently matches ALL call user data, if
present.

Current Changes:

This patch is a follow up to the patch submitted previously by Andrew
Hendry, and allows the user to selectively control the number of octets of
call user data in the call request packet, that the kernel will match.  By
default no call user data is matched, even if call user data is present. 
To allow call user data matching, a cudmatchlength > 0 has to be passed
into the kernel after which the passed number of octets will be matched. 
Otherwise the kernel behavior is exactly as the original implementation.

This patch also ensures that as is normally the case, no call user data
will be present in the Call accepted / call connected packet sent back to
the caller 

Future Changes on next patch:

There are cases however when call user data may be present in the call
accepted packet.  According to the X.25 recommendation (ITU-T 10/96)
section 5.2.3.2 call user data may be present in the call accepted packet
provided the fast select facility is used.  My next patch will include this
fast select utility and the ability to send up to 128 octets call user data
in the call accepted packet provided the fast select facility is used.  I
am currently testing this, again with xot on linux and cisco.  
Signed-off-by: NShaun Pereira <spereira@tusc.com.au>

(With a fix from Alexey Dobriyan <adobriyan@gmail.com>)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: jlamanna@gmail.com

ebtables.c vfree() checking cleanups.

Signed-off by: James Lamanna <jlamanna@gmail.com>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

From: Nishanth Aravamudan <nacc@us.ibm.com>

Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. The current code is not wrong, but it does not account for
early return due to signals, so I think msleep() should be appropriate.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off by: Chuck Short <zulcss@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch provides support for registering multiple netpoll clients to the
same network device.  Only one of these clients may register an rx_hook,
however.  In practice, this restriction has not been problematic.  It is
worth mentioning, though, that the current design can be easily extended to
allow for the registration of multiple rx_hooks.

The basic idea of the patch is that the rx_np pointer in the netpoll_info
structure points to the struct netpoll that has rx_hook filled in.  Aside
from this one case, there is no need for a pointer from the struct
net_device to an individual struct netpoll.

A lock is introduced to protect the setting and clearing of the np_rx
pointer.  The pointer will only be cleared upon netpoll client module
removal, and the lock should be uncontested.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces a netpoll_info structure, which the struct net_device
will now point to instead of pointing to a struct netpoll.  The reason for
this is two-fold: 1) fields such as the rx_flags, poll_owner, and poll_lock
should be maintained per net_device, not per netpoll;  and 2) this is a first
step in providing support for multiple netpoll clients to register against the
same net_device.

The struct netpoll is now pointed to by the netpoll_info structure.  As
such, the previous behaviour of the code is preserved.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This trivial patch moves the assignment of poll_owner to -1 inside of
the lock.  This fixes a potential SMP race in the code.
Signed-off-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>