This adds a field to track if advertising instances are enabled or not
and only clear HCI_LE_ADV flag if there is no instance left advertising.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Syzbot reported a corrupted list in kobject_add_internal [1]. This
happens when multiple HCI_EV_SYNC_CONN_COMPLETE event packets with
status 0 are sent for the same HCI connection. This causes us to
register the device more than once which corrupts the kset list.

As this is forbidden behavior, we add a check for whether we're
trying to process the same HCI_EV_SYNC_CONN_COMPLETE event multiple
times for one connection. If that's the case, the event is invalid, so
we report an error that the device is misbehaving, and ignore the
packet.

Link: https://syzkaller.appspot.com/bug?extid=66264bf2fd0476be7e6c [1]
Reported-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Tested-by: syzbot+66264bf2fd0476be7e6c@syzkaller.appspotmail.com
Signed-off-by: NDesmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Error status of this event means that it has ended due reasons other
than a connection:

 'If advertising has terminated as a result of the advertising duration
 elapsing, the Status parameter shall be set to the error code
 Advertising Timeout (0x3C).'

 'If advertising has terminated because the
 Max_Extended_Advertising_Events was reached, the Status parameter
 shall be set to the error code Limit Reached (0x43).'

Fixes: acf0aeae ("Bluetooth: Handle ADv set terminated event")
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
blacklist -> reject list
whitelist -> accept list
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
master -> central
slave  -> peripheral
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
master -> initiator (for smp) or central (everything else)
slave  -> responder (for smp) or peripheral (everything else)

The #define preprocessor terms are unchanged for now to not disturb
dependent APIs.
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
slave       -> peripheral
blacklisted -> blocked
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch replaces some non-inclusive terms based on the appropriate
language mapping table compiled by the Bluetooth SIG:
https://specificationrefs.bluetooth.com/language-mapping/Appropriate_Language_Mapping_Table.pdf

Specifically, these terms are replaced:
master -> central
slave  -> peripheral
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When using controller based address resolution, then the destination
address type during le_conn_complete uses 0x02 & 0x03 if controller
resolves the destination address(RPA).
These address types need to be converted back into either 0x00 0r 0x01
Signed-off-by: NSathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Even with rate limited reporting this is very spammy and since
it is remote device that is providing bogus data there is no
need to report this as error.

Since real_len variable was used only to allow conditional error
message it is now also removed.

[72454.143336] bt_err_ratelimited: 10 callbacks suppressed
[72454.143337] Bluetooth: hci0: advertising data len corrected
[72454.296314] Bluetooth: hci0: advertising data len corrected
[72454.892329] Bluetooth: hci0: advertising data len corrected
[72455.051319] Bluetooth: hci0: advertising data len corrected
[72455.357326] Bluetooth: hci0: advertising data len corrected
[72455.663295] Bluetooth: hci0: advertising data len corrected
[72455.787278] Bluetooth: hci0: advertising data len corrected
[72455.942278] Bluetooth: hci0: advertising data len corrected
[72456.094276] Bluetooth: hci0: advertising data len corrected
[72456.249137] Bluetooth: hci0: advertising data len corrected
[72459.416333] bt_err_ratelimited: 13 callbacks suppressed
[72459.416334] Bluetooth: hci0: advertising data len corrected
[72459.721334] Bluetooth: hci0: advertising data len corrected
[72460.011317] Bluetooth: hci0: advertising data len corrected
[72460.327171] Bluetooth: hci0: advertising data len corrected
[72460.638294] Bluetooth: hci0: advertising data len corrected
[72460.946350] Bluetooth: hci0: advertising data len corrected
[72461.225320] Bluetooth: hci0: advertising data len corrected
[72461.690322] Bluetooth: hci0: advertising data len corrected
[72462.118318] Bluetooth: hci0: advertising data len corrected
[72462.427319] Bluetooth: hci0: advertising data len corrected
[72464.546319] bt_err_ratelimited: 7 callbacks suppressed
[72464.546319] Bluetooth: hci0: advertising data len corrected
[72464.857318] Bluetooth: hci0: advertising data len corrected
[72465.163332] Bluetooth: hci0: advertising data len corrected
[72465.278331] Bluetooth: hci0: advertising data len corrected
[72465.432323] Bluetooth: hci0: advertising data len corrected
[72465.891334] Bluetooth: hci0: advertising data len corrected
[72466.045334] Bluetooth: hci0: advertising data len corrected
[72466.197321] Bluetooth: hci0: advertising data len corrected
[72466.340318] Bluetooth: hci0: advertising data len corrected
[72466.498335] Bluetooth: hci0: advertising data len corrected
[72469.803299] bt_err_ratelimited: 10 callbacks suppressed
Signed-off-by: NSzymon Janc <szymon.janc@codecoup.pl>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=203753
Cc: stable@vger.kernel.org
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

For incoming SCO connection with transparent coding format, alt setting
of CVSD is getting applied instead of Transparent.

Before fix:
< HCI Command: Accept Synchron.. (0x01|0x0029) plen 21  #2196 [hci0] 321.342548
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4               #2197 [hci0] 321.343585
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17  #2198 [hci0] 321.351666
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
........
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2336 [hci0] 321.383655
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2337 [hci0] 321.389558
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2338 [hci0] 321.393615
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2339 [hci0] 321.393618
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2340 [hci0] 321.393618
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2341 [hci0] 321.397070
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2342 [hci0] 321.403622
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2343 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2344 [hci0] 321.403625
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2345 [hci0] 321.403625
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2346 [hci0] 321.404569
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2347 [hci0] 321.412091
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2348 [hci0] 321.413626
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2349 [hci0] 321.413630
> SCO Data RX: Handle 257 flags 0x00 dlen 48            #2350 [hci0] 321.413630
< SCO Data TX: Handle 257 flags 0x00 dlen 60            #2351 [hci0] 321.419674

After fix:

< HCI Command: Accept Synchronou.. (0x01|0x0029) plen 21  #309 [hci0] 49.439693
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x003f
          HV1 may be used
          HV2 may be used
          HV3 may be used
          EV3 may be used
          EV4 may be used
          EV5 may be used
> HCI Event: Command Status (0x0f) plen 4                 #310 [hci0] 49.440308
      Accept Synchronous Connection Request (0x01|0x0029) ncmd 1
        Status: Success (0x00)
> HCI Event: Synchronous Connect Complete (0x2c) plen 17  #311 [hci0] 49.449308
        Status: Success (0x00)
        Handle: 257
        Address: 1C:CC:D6:E2:EA:80 (Xiaomi Communications Co Ltd)
        Link type: eSCO (0x02)
        Transmission interval: 0x0c
        Retransmission window: 0x04
        RX packet length: 60
        TX packet length: 60
        Air mode: Transparent (0x03)
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #312 [hci0] 49.450421
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #313 [hci0] 49.457927
> HCI Event: Max Slots Change (0x1b) plen 3               #314 [hci0] 49.460345
        Handle: 256
        Max slots: 5
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #315 [hci0] 49.465453
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #316 [hci0] 49.470502
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #317 [hci0] 49.470519
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #318 [hci0] 49.472996
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #319 [hci0] 49.480412
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #320 [hci0] 49.480492
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #321 [hci0] 49.487989
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #322 [hci0] 49.490303
< SCO Data TX: Handle 257 flags 0x00 dlen 60              #323 [hci0] 49.495496
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #324 [hci0] 49.500304
> SCO Data RX: Handle 257 flags 0x00 dlen 60              #325 [hci0] 49.500311
Signed-off-by: NKiran K <kiran.k@intel.com>
Signed-off-by: NLokendra Singh <lokendra.singh@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

During command status or command complete event, the controller may set
ncmd=0 indicating that it is not accepting any more commands. In such a
case, host holds off sending any more commands to the controller. If the
controller doesn't recover from such condition, host will wait forever,
until the user decides that the Bluetooth is broken and may power cycles
the Bluetooth.

This patch triggers the hardware error to reset the controller and
driver when it gets into such state as there is no other wat out.
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NManish Mandlik <mmandlik@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When an MGMT_EV_DEVICE_CONNECTED event is reported back to the user
space we will set the flags to tell if the established connection is
outbound or not. This is useful for the user space to log better metrics
and error messages.
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NYu Liu <yudiliu@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Fix some spelling mistakes in comments:
udpate  ==> update
retreive  ==> retrieve
accidentially  ==> accidentally
correspondig  ==> corresponding
adddress  ==> address
estabilish  ==> establish
commplete  ==> complete
Unkown  ==> Unknown
triggerd  ==> triggered
transtion  ==> transition
Signed-off-by: NZheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some extended advertising hci command complete events are still using
hdev->cur_adv_instance to map the request to the correct advertisement
handle. However, with extended advertising, "current instance" doesn't
make sense as we can have multiple concurrent advertisements. This
change switches these command complete handlers to use the advertising
handle from the request/event, to ensure we will always use the correct
advertising handle regardless of the state of hdev->cur_adv_instance.

This change is tested on hatch and kefka chromebooks and run through
single- and multi-advertising automated tests to confirm callbacks
report tx power to the correct advertising handle, etc.
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

1. Add space when needed;
2. Block comments style fix;
3. Move open brace '{' following function definitions to the next line;
4. Remove unnecessary braces '{}' for single statement blocks.
Signed-off-by: NMeng Yu <yumeng18@huawei.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().

This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().

Example crash call trace:
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe3/0x144 lib/dump_stack.c:118
 print_address_description+0x67/0x22a mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report mm/kasan/report.c:412 [inline]
 kasan_report+0x251/0x28f mm/kasan/report.c:396
 hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
 l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
 l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
 l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
 l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
 l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
 l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
 hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
 hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Allocated by task 38:
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
 kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
 kmalloc include/linux/slab.h:515 [inline]
 kzalloc include/linux/slab.h:709 [inline]
 hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
 l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
 l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
 l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
 hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
 hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
 hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

Freed by task 1732:
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free mm/kasan/kasan.c:521 [inline]
 __kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
 slab_free_hook mm/slub.c:1409 [inline]
 slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
 slab_free mm/slub.c:3009 [inline]
 kfree+0x182/0x21e mm/slub.c:3972
 hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
 hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
 hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
 process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
 worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
 kthread+0x2f0/0x304 kernel/kthread.c:253
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415

The buggy address belongs to the object at ffff8881d7af9180
 which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
 128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                            ^
 ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: NArchie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Skip updation of tx and rx PHYs values, when PHY Update
event's status is not successful.
Signed-off-by: NAyush Garg <ayush.garg@samsung.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

During suspend, there are a few scan enable and set event filter
commands that don't need to be sent unless there are actual BR/EDR
devices capable of waking the system. Check the HCI_PSCAN bit before
writing scan enable and use a new dev flag, HCI_EVENT_FILTER_CONFIGURED
to control whether to clear the event filter.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NArchie Pusaka <apusaka@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Queries tx power via HCI_LE_Read_Transmit_Power command when the hci
device is initialized, and stores resulting min/max LE power in hdev
struct. If command isn't available (< BT5 support), min/max values
both default to HCI_TX_POWER_INVALID.

This patch is manually verified by ensuring BT5 devices correctly query
and receive controller tx power range.
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This patch adds support for the new advertising add interface, with the
first command setting advertising parameters and the second to set
advertising data. The set parameters command allows the caller to leave
some fields "unset", with a params bitfield defining which params were
purposefully set. Unset parameters will be given defaults when calling
hci_add_adv_instance. The data passed to the param mgmt command is
allowed to be flexible, so in the future if bluetoothd passes a larger
structure with new params, the mgmt command will ignore the unknown
members at the end.

This change has been validated on both hatch (extended advertising) and
kukui (no extended advertising) chromebooks running bluetoothd that
support this new interface. I ran the following manual tests:
- Set several (3) advertisements using modified test_advertisement.py
- For each, validate correct data and parameters in btmon trace
- Verified both for software rotation and extended adv

Automatic test suite also run, testing many (25) scenarios of single and
multi-advertising for data/parameter correctness.
Reviewed-by: NSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: NDaniel Winkler <danielwinkler@google.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

hci_phy_link_complete_evt() has several duplicate error paths -- consolidate
them, using the *goto* statements.
Signed-off-by: NSergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

`num_reports` is not being properly checked. A malformed event packet with
a large `num_reports` number makes hci_le_direct_adv_report_evt() read out
of bounds. Fix it.

Cc: stable@vger.kernel.org
Fixes: 2f010b55 ("Bluetooth: Add support for handling LE Direct Advertising Report events")
Reported-and-tested-by: syzbot+24ebd650e20bd263ca01@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=24ebd650e20bd263ca01Signed-off-by: NPeilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.

- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:

bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;

Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.

Fixes: d5e91192 ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272fSigned-off-by: NAnmol Karn <anmol.karan123@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Currently the code auto-creates hci_conn only if the remote address has
been discovered before. This may not be the case. For example, the
remote device may trigger connection after reboot at already-paired
state so there is no inquiry result found, but it is still correct to
create the hci_conn when Connection Complete event is received.

A better guard is to check against bredr allowlist. Devices in the
allowlist have been given permission to auto-connect.

Fixes: 4f40afc6 ("Bluetooth: Handle BR/EDR devices during suspend")
Signed-off-by: NSonny Sasaka <sonnysasaka@chromium.org>
Reviewed-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Emit controller suspend and resume events when we are ready for suspend
and we've resumed from suspend.

The controller suspend event will report whatever suspend state was
successfully entered. The controller resume event will check the first
HCI event that was received after we finished preparing for suspend and,
if it was a connection event, store the address of the peer that caused
the event. If it was not a connection event, we mark the wake reason as
an unexpected event.

Here is a sample btmon trace with these events:

@ MGMT Event: Controller Suspended (0x002d) plen 1
        Suspend state: Page scanning and/or passive scanning (2)

@ MGMT Event: Controller Resumed (0x002e) plen 8
        Wake reason: Remote wake due to peer device connection (2)
        LE Address: CD:F3:CD:13:C5:9A (OUI CD-F3-CD)
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Fix kernel oops observed when an ext adv data is larger than 31 bytes.

This can be reproduced by setting up an advertiser with advertisement
larger than 31 bytes.  The issue is not sensitive to the advertisement
content.  In particular, this was reproduced with an advertisement of
229 bytes filled with 'A'.  See stack trace below.

This is fixed by not catching ext_adv as legacy adv are only cached to
be able to concatenate a scanable adv with its scan response before
sending it up through mgmt.

With ext_adv, this is no longer necessary.

  general protection fault: 0000 [#1] SMP PTI
  CPU: 6 PID: 205 Comm: kworker/u17:0 Not tainted 5.4.0-37-generic #41-Ubuntu
  Hardware name: Dell Inc. XPS 15 7590/0CF6RR, BIOS 1.7.0 05/11/2020
  Workqueue: hci0 hci_rx_work [bluetooth]
  RIP: 0010:hci_bdaddr_list_lookup+0x1e/0x40 [bluetooth]
  Code: ff ff e9 26 ff ff ff 0f 1f 44 00 00 0f 1f 44 00 00 55 48 8b 07 48 89 e5 48 39 c7 75 0a eb 24 48 8b 00 48 39 f8 74 1c 44 8b 06 <44> 39 40 10 75 ef 44 0f b7 4e 04 66 44 39 48 14 75 e3 38 50 16 75
  RSP: 0018:ffffbc6a40493c70 EFLAGS: 00010286
  RAX: 4141414141414141 RBX: 000000000000001b RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffff9903e76c100f RDI: ffff9904289d4b28
  RBP: ffffbc6a40493c70 R08: 0000000093570362 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff9904344eae38 R12: ffff9904289d4000
  R13: 0000000000000000 R14: 00000000ffffffa3 R15: ffff9903e76c100f
  FS: 0000000000000000(0000) GS:ffff990434580000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007feed125a000 CR3: 00000001b860a003 CR4: 00000000003606e0
  Call Trace:
    process_adv_report+0x12e/0x560 [bluetooth]
    hci_le_meta_evt+0x7b2/0xba0 [bluetooth]
    hci_event_packet+0x1c29/0x2a90 [bluetooth]
    hci_rx_work+0x19b/0x360 [bluetooth]
    process_one_work+0x1eb/0x3b0
    worker_thread+0x4d/0x400
    kthread+0x104/0x140

Fixes: c215e939 ("Bluetooth: Process extended ADV report event")
Reported-by: NAndy Nguyen <theflow@google.com>
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reported-by: NBalakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Tested-by: NSonny Sasaka <sonnysasaka@chromium.org>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds support to enable the use of RPA Address resolution
using expermental feature mgmt command.
Signed-off-by: NSathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

In this patch if le_create_conn process is started restrict to
disable address resolution and same is disabled during
le_enh_connection_complete
Signed-off-by: NSathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

When using controller based address resolution, then the new address
types 0x02 and 0x03 are used. These types need to be converted back into
either public address or random address types.

This patch is specially during LE_CREATE_CONN if using own_add_type as 0x02
or 0x03.
Signed-off-by: NSathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Check `num_rsp` before using it as for-loop counter. Add `unlock` label.

Cc: stable@vger.kernel.org
Signed-off-by: NPeilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Check `num_rsp` before using it as for-loop counter.

Cc: stable@vger.kernel.org
Signed-off-by: NPeilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Check upon `num_rsp` is insufficient. A malformed event packet with a
large `num_rsp` number makes hci_extended_inquiry_result_evt() go out
of bounds. Fix it.

This patch fixes the following syzbot bug:

    https://syzkaller.appspot.com/bug?id=4bf11aa05c4ca51ce0df86e500fce486552dc8d2

Reported-by: syzbot+d8489a79b781849b9c46@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: NPeilin Ye <yepeilin.cs@gmail.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This patch adds a configurable LE autoconnect timeout.
Signed-off-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

E0 is not allowed with Level 4:

BLUETOOTH CORE SPECIFICATION Version 5.2 | Vol 3, Part C page 1319:

  '128-bit equivalent strength for link and encryption keys
   required using FIPS approved algorithms (E0 not allowed,
   SAFER+ not allowed, and P-192 not allowed; encryption key
   not shortened'

SC enabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x0b 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
          Secure Connections (Host Support)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with AES-CCM (0x02)

SC disabled:

> HCI Event: Read Remote Extended Features (0x23) plen 13
        Status: Success (0x00)
        Handle: 256
        Page: 1/2
        Features: 0x03 0x00 0x00 0x00 0x00 0x00 0x00 0x00
          Secure Simple Pairing (Host Support)
          LE Supported (Host)
> HCI Event: Encryption Change (0x08) plen 4
        Status: Success (0x00)
        Handle: 256
        Encryption: Enabled with E0 (0x01)
[May 8 20:23] Bluetooth: hci0: Invalid security: expect AES but E0 was used
< HCI Command: Disconnect (0x01|0x0006) plen 3
        Handle: 256
        Reason: Authentication Failure (0x05)
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

This calls hci_update_background_scan() when there is any update on the
advertisement monitors. If there is at least one advertisement monitor,
the filtering policy of scan parameters should be 0x00. This also reports
device found mgmt events if there is at least one monitor.

The following cases were tested with btmgmt advmon-* commands.
(1) add a ADV monitor and observe that the passive scanning is
triggered.
(2) remove the last ADV monitor and observe that the passive scanning is
terminated.
(3) with a LE peripheral paired, repeat (1) and observe the passive
scanning continues.
(4) with a LE peripheral paired, repeat (2) and observe the passive
scanning continues.
(5) with a ADV monitor, suspend/resume the host and observe the passive
scanning continues.
Signed-off-by: NMiao-chen Chou <mcchou@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

In order to more easily add device flags to classic devices, create
a new type of bdaddr_list that supports setting flags.
Signed-off-by: NAbhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: NAlain Michaud <alainm@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: NJohan Hedberg <johan.hedberg@intel.com>

This makes hci_encrypt_cfm calls hci_connect_cfm in case the connection
state is BT_CONFIG so callers don't have to check the state.
Signed-off-by: NLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection
with invalid parameter at the first SCO request expecting AG to
attempt another SCO request with the use of "safe settings" for
given codec, base on section 5.7.1.2 of HFP 1.7 specification.

This patch addresses it by adding "Invalid LMP Parameters" (0x1e)
to the SCO fallback case. Verified with below log:

< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 13
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x0380
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Number of Completed Packets (0x13) plen 5
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e)
        Handle: 0
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x00
        Retransmission window: 0x02
        RX packet length: 0
        TX packet length: 0
        Air mode: Transparent (0x03)
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
        Handle: 256
        Transmit bandwidth: 8000
        Receive bandwidth: 8000
        Max latency: 8
        Setting: 0x0003
          Input Coding: Linear
          Input Data Format: 1's complement
          Input Sample Size: 8-bit
          # of bits padding at MSB: 0
          Air Coding Format: Transparent Data
        Retransmission effort: Optimize for link quality (0x02)
        Packet type: 0x03c8
          EV3 may be used
          2-EV3 may not be used
          3-EV3 may not be used
          2-EV5 may not be used
          3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4
      Setup Synchronous Connection (0x01|0x0028) ncmd 1
        Status: Success (0x00)
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 5
> HCI Event: Max Slots Change (0x1b) plen 3
        Handle: 256
        Max slots: 1
> HCI Event: Synchronous Connect Complete (0x2c) plen 17
        Status: Success (0x00)
        Handle: 257
        Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC)
        Link type: eSCO (0x02)
        Transmission interval: 0x06
        Retransmission window: 0x04
        RX packet length: 30
        TX packet length: 30
        Air mode: Transparent (0x03)
Signed-off-by: NHsin-Yu Chao <hychao@chromium.org>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>