- 07 8月, 2013 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull misc x86 fixes from Peter Anvin. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, amd, microcode: Fix error path in apply_microcode_amd() x86, fpu: correct the asm constraints for fxsave, unbreak mxcsr.daz x86, efi: correct call to free_pages x86/iommu/vt-d: Expand interrupt remapping quirk to cover x58 chipset
-
由 Steven Rostedt 提交于
Some of my configs I test with have CONFIG_A11Y_BRAILLE_CONSOLE set. When I started testing against v3.11-rc4 my console went bonkers. Using ktest to bisect the issue, it came down to: commit bbeddf52 "printk: move braille console support into separate braille.[ch] files" Looking into the patch I found the problem. It's with the return of braille_register_console(). As anything other than NULL is considered a failure. But for those of us that have CONFIG_A11Y_BRAILLE_CONSOLE set but do not define a "brl" or "brl=" on the command line, we still may want a console that those with sight can still use. Return NULL (success) if "brl" or "brl=" is not on the console line. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NJoe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Oleg Nesterov 提交于
This reverts commit fab840fc. This commit even has the test-case to prove that the tracee can be killed by SIGTRAP if the debugger does not remove the breakpoints before PTRACE_DETACH. However, this is exactly what wineserver deliberately does, set_thread_context() calls PTRACE_ATTACH + PTRACE_DETACH just for PTRACE_POKEUSER(DR*) in between. So we should revert this fix and document that PTRACE_DETACH should keep the breakpoints. Reported-by: NFelipe Contreras <felipe.contreras@gmail.com> Signed-off-by: NOleg Nesterov <oleg@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "Two platform-specific fixes plus a fix for oprofile which was calling smp_processor_id() in preemptible code" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: BMIPS: fix hardware interrupt routing for boot CPU != 0 MIPS: oprofile: Fix BUG due to smp_processor_id() in preemptible code. MIPS: PNX833x: PNX8335_PCI_ETHERNET_INT depends on CONFIG_SOC_PNX8335
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux由 Linus Torvalds 提交于
Pull s390 fixes from Martin Schwidefsky: "Enable LZ4 compression for the kernel image, add the machine id for the new zBC12 model, fix an issue with hanging dasd devices, correct a Kconfig dependency, fix a compile error in the perf module with CONFIG_KVM=n and fix the find_next_bit_left primitive for the PCI base layer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: fix hanging devices after path events s390/perf: fix compile error (undefined reference sie_exit) s390/bitops: fix find_next_bit_left s390: add support for IBM zBC12 machine s390/Kconfig: select 'TTY' when 'S390_GUEST' is enabled s390: add support for LZ4-compressed kernel
-
由 Oleg Nesterov 提交于
unshare_userns(new_cred) does *new_cred = prepare_creds() before create_user_ns() which can fail. However, the caller expects that it doesn't need to take care of new_cred if unshare_userns() fails. We could change the single caller, sys_unshare(), but I think it would be more clean to avoid the side effects on failure, so with this patch unshare_userns() does put_cred() itself and initializes *new_cred only if create_user_ns() succeeeds. Cc: stable@vger.kernel.org Signed-off-by: NOleg Nesterov <oleg@redhat.com> Reviewed-by: NAndy Lutomirski <luto@amacapital.net> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 8月, 2013 8 次提交
-
-
由 Florian Fainelli 提交于
The hardware interrupt routing for boot CPU != 0 is wrong because it will route all the hardware interrupts to TP0 which is not the one we booted from. Fix this by properly checking which boot CPU we are booting from and updating the right interrupt mask for the boot CPU. This fixes booting on BCM3368 with bmips_smp_emabled = 0. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Cc: cernekee@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/5650/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
current_cpu_type() is not preemption-safe. If CONFIG_PREEMPT is enabled then mipsxx_reg_setup() can be called from preemptible state. Added get_cpu()/put_cpu() pair to make it preemption-safe. This was found while testing oprofile with CONFIG_DEBUG_PREEMPT enable. /usr/zntestsuite # opcontrol --init /usr/zntestsuite # opcontrol --setup --event=L2_CACHE_ACCESSES:500 --event=L2_CACHE_MISSES:500 --no-vmlinux /usr/zntestsuite # opcontrol --start Using 2.6+ OProfile kernel interface. BUG: using smp_processor_id() in preemptible [00000000] code: oprofiled/1362 caller is mipsxx_reg_setup+0x11c/0x164 CPU: 0 PID: 1362 Comm: oprofiled Not tainted 3.10.4 #18 Stack : 00000006 70757465 00000000 00000000 00000000 00000000 80b173f6 00000037 80b10000 00000000 80b21614 88f5a220 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 89c49c00 89c49c2c 80721254 807b7927 8012c1d0 80b10000 80721254 00000000 00000552 88f5a220 80b1335c 807b78e6 89c49ba8 ... Call Trace: [<801099a4>] show_stack+0x64/0x7c [<80665520>] dump_stack+0x20/0x2c [<803a2250>] debug_smp_processor_id+0xe0/0xf0 [<8052df24>] mipsxx_reg_setup+0x11c/0x164 [<8052cd70>] op_mips_setup+0x24/0x4c [<80529cfc>] oprofile_setup+0x5c/0x12c [<8052b9f8>] event_buffer_open+0x78/0xf8 [<801c3150>] do_dentry_open.isra.15+0x2b8/0x3b0 [<801c3270>] finish_open+0x28/0x4c [<801d49b8>] do_last.isra.41+0x2cc/0xd00 [<801d54a0>] path_openat+0xb4/0x4c4 [<801d5c44>] do_filp_open+0x3c/0xac [<801c4744>] do_sys_open+0x110/0x1f4 [<8010f47c>] stack_done+0x20/0x44 Bug reported and original patch by Jerin Jacob <jerinjacobk@gmail.com>. Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NJerin Jacob <jerinjacobk@gmail.com>
-
由 Markos Chandras 提交于
The PNX8335_PCI_ETHERNET_INT macro is defined in arch/mips/include/asm/mach-pnx833x/irq-mapping.h only if CONFIG_SOC_PNX8335 is selected. Fixes the following randconfig problem: arch/mips/pnx833x/common/platform.c:210:12: error: 'PNX8335_PIC_ETHERNET_INT' undeclared here (not in a function) Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com> Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5585/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Linus Torvalds 提交于
-
git://git.infradead.org/users/vkoul/slave-dma由 Linus Torvalds 提交于
Pull dmaengine fixes from Vinod Koul: "Two fixes for slave dmaengine. The first fixes cyclic dma transfers for pl330 and the second one makes us return the correct error code on probe" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: pl330: Fix cyclic transfers pch_dma: fix error return code in pch_dma_probe()
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fix from Dave Airlie: "Just a quick fix that a few people have reported, be nice to have in asap" The drm tree seems to be very confused about 64-bit divides. Here it uses a slow 64-by-64 bit divide to divide by a small constant. Oh well. Doesn't look performance-critical, just stupid. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: fix 64 bit divide in SI spm code
-
由 Hugh Dickins 提交于
Commit 46a1c2c7 ("vfs: export lseek_execute() to modules") broke the tmpfs SEEK_DATA/SEEK_HOLE implementation, because vfs_setpos() converts the carefully prepared -ENXIO to -EINVAL. Other filesystems avoid it in error cases: do the same in tmpfs. Signed-off-by: NHugh Dickins <hughd@google.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "All small regression or small fixes, nothing surprising at this stage. - regression fix for intel Mac Mini quirk - compress ioctl error fix - ASoC fixes for control change notifications, some UI fixes, driver-specific fixes (resource leak, build errors, etc)" * tag 'sound-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing fixup for Mac Mini with STAC9221 ASoC: wm0010: Fix resource leak ASoC: au1x: Fix build ASoC: bf5xx-ac97: Fix compile error with SND_BF5XX_HAVE_COLD_RESET ASoC: bfin-ac97: Fix prototype error following AC'97 refactoring ALSA: compress: fix the return value for SNDRV_COMPRESS_VERSION ASoC: dapm: Fix return value of snd_soc_dapm_put_{volsw,enum_virt}()
-
- 04 8月, 2013 14 次提交
-
-
由 Alex Deucher 提交于
Forgot to use the appropriate math64 function. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Don't ignore user initiated wireless regulatory settings on cards with custom regulatory domains, from Arik Nemtsov. 2) Fix length check of bluetooth information responses, from Jaganath Kanakkassery. 3) Fix misuse of PTR_ERR in btusb, from Adam Lee. 4) Handle rfkill properly while iwlwifi devices are offline, from Emmanuel Grumbach. 5) Fix r815x devices DMA'ing to stack buffers, from Hayes Wang. 6) Kernel info leak in ATM packet scheduler, from Dan Carpenter. 7) 8139cp doesn't check for DMA mapping errors, from Neil Horman. 8) Fix bridge multicast code to not snoop when no querier exists, otherwise mutlicast traffic is lost. From Linus Lüssing. 9) Avoid soft lockups in fib6_run_gc(), from Michal Kubecek. 10) Fix races in automatic address asignment on ipv6, which can result in incorrect lifetime assignments. From Jiri Benc. 11) Cure build bustage when CONFIG_NET_LL_RX_POLL is not set and rename it CONFIG_NET_RX_BUSY_POLL to eliminate the last reference to the original naming of this feature. From Cong Wang. 12) Fix crash in TIPC when server socket creation fails, from Ying Xue. 13) macvlan_changelink() silently succeeds when it shouldn't, from Michael S Tsirkin. 14) HTB packet scheduler can crash due to sign extension, fix from Stephen Hemminger. 15) With the cable unplugged, r8169 prints out a message every 10 seconds, make it netif_dbg() instead of netif_warn(). From Peter Wu. 16) Fix memory leak in rtm_to_ifaddr(), from Daniel Borkmann. 17) sis900 gets spurious TX queue timeouts due to mismanagement of link carrier state, from Denis Kirjanov. 18) Validate somaxconn sysctl to make sure it fits inside of a u16. From Roman Gushchin. 19) Fix MAC address filtering on qlcnic, from Shahed Shaikh. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (68 commits) qlcnic: Fix for flash update failure on 83xx adapter qlcnic: Fix link speed and duplex display for 83xx adapter qlcnic: Fix link speed display for 82xx adapter qlcnic: Fix external loopback test. qlcnic: Removed adapter series name from warning messages. qlcnic: Free up memory in error path. qlcnic: Fix ingress MAC learning qlcnic: Fix MAC address filter issue on 82xx adapter net: ethernet: davinci_emac: drop IRQF_DISABLED netlabel: use domain based selectors when address based selectors are not available net: check net.core.somaxconn sysctl values sis900: Fix the tx queue timeout issue net: rtm_to_ifaddr: free ifa if ifa_cacheinfo processing fails r8169: remove "PHY reset until link up" log spam net: ethernet: cpsw: drop IRQF_DISABLED htb: fix sign extension bug macvlan: handle set_promiscuity failures macvlan: better mode validation tipc: fix oops when creating server socket fails net: rename CONFIG_NET_LL_RX_POLL to CONFIG_NET_RX_BUSY_POLL ...
-
由 Himanshu Madhani 提交于
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Set link speed and duplex to unknown when link is not up. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Do not obtain link speed from register when adapter link is down. Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Driver was not handling external loopback diagnostic test request. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pratik Pujar 提交于
Signed-off-by: NPratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
o Delete MAC address from the adapter's filter table if the source MAC address of ingress packet matches. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shahed Shaikh 提交于
Driver was passing the address of a pointer instead of the pointer itself. Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd bugfixes from Bruce Fields: "Most of this is due to a screwup on my part -- some gss-proxy crashes got fixed before the merge window but somehow never made it out of a temporary git repo on my laptop...." * 'for-3.11' of git://linux-nfs.org/~bfields/linux: svcrpc: set cr_gss_mech from gss-proxy as well as legacy upcall svcrpc: fix kfree oops in gss-proxy code svcrpc: fix gss-proxy xdr decoding oops svcrpc: fix gss_rpc_upcall create error NFSD/sunrpc: avoid deadlock on TCP connection due to memory pressure.
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fix from Guenter Roeck: "Fix chip initialization/configuration in MAX6697 driver" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (max6697) fix MAX6581 ideality
-
git://git.linaro.org/people/rmk/linux-arm由 Linus Torvalds 提交于
Pull arm fixes fixes from Russell King: "This fixes a couple of problems with commit 48be69a0 ("ARM: move signal handlers into a vdso-like page"), one of which was originally discovered via my testing originally, but the fix for it was never actually committed. The other shows up on noMMU builds, and such platforms are extremely rare and as such are not part of my nightly testing" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: fix nommu builds with 48be69a0 (ARM: move signal handlers into a vdso-like page) ARM: fix a cockup in 48be69a0 (ARM: move signal handlers into a vdso-like page)
-
- 03 8月, 2013 12 次提交
-
-
由 Vivien Didelot 提交于
Without this patch, the values for ideality (register 0x4b) and ideality selection mask (register 0x4c) are inverted. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 3.9+ Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Russell King 提交于
-
由 Russell King 提交于
Olof reports that noMMU builds error out with: arch/arm/kernel/signal.c: In function 'setup_return': arch/arm/kernel/signal.c:413:25: error: 'mm_context_t' has no member named 'sigpage' This shows one of the evilnesses of IS_ENABLED(). Get rid of it here and replace it with #ifdef's - and as no noMMU platform can make use of sigpage, depend on CONIFG_MMU not CONFIG_ARM_MPU. Reported-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Unfortunately, I never committed the fix to a nasty oops which can occur as a result of that commit: ------------[ cut here ]------------ kernel BUG at /home/olof/work/batch/include/linux/mm.h:414! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 490 Comm: killall5 Not tainted 3.11.0-rc3-00288-gabe03080 #53 task: e90acac0 ti: e9be8000 task.ti: e9be8000 PC is at special_mapping_fault+0xa4/0xc4 LR is at __do_fault+0x68/0x48c This doesn't show up unless you do quite a bit of testing; a simple boot test does not do this, so all my nightly tests were passing fine. The reason for this is that install_special_mapping() expects the page array to stick around, and as this was only inserting one page which was stored on the kernel stack, that's why this was blowing up. Reported-by: NOlof Johansson <olof@lixom.net> Tested-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Paul Moore 提交于
NetLabel has the ability to selectively assign network security labels to outbound traffic based on either the LSM's "domain" (different for each LSM), the network destination, or a combination of both. Depending on the type of traffic, local or forwarded, and the type of traffic selector, domain or address based, different hooks are used to label the traffic; the goal being minimal overhead. Unfortunately, there is a bug such that a system using NetLabel domain based traffic selectors does not correctly label outbound local traffic that is not assigned to a socket. The issue is that in these cases the associated NetLabel hook only looks at the address based selectors and not the domain based selectors. This patch corrects this by checking both the domain and address based selectors so that the correct labeling is applied, regardless of the configuration type. In order to acomplish this fix, this patch also simplifies some of the NetLabel domainhash structures to use a more common outbound traffic mapping type: struct netlbl_dommap_def. This simplifies some of the code in this patch and paves the way for further simplifications in the future. Signed-off-by: NPaul Moore <pmoore@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roman Gushchin 提交于
It's possible to assign an invalid value to the net.core.somaxconn sysctl variable, because there is no checks at all. The sk_max_ack_backlog field of the sock structure is defined as unsigned short. Therefore, the backlog argument in inet_listen() shouldn't exceed USHRT_MAX. The backlog argument in the listen() syscall is truncated to the somaxconn value. So, the somaxconn value shouldn't exceed 65535 (USHRT_MAX). Also, negative values of somaxconn are meaningless. before: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 net.core.somaxconn = 65536 $ sysctl -w net.core.somaxconn=-100 net.core.somaxconn = -100 after: $ sysctl -w net.core.somaxconn=256 net.core.somaxconn = 256 $ sysctl -w net.core.somaxconn=65536 error: "Invalid argument" setting key "net.core.somaxconn" $ sysctl -w net.core.somaxconn=-100 error: "Invalid argument" setting key "net.core.somaxconn" Based on a prior patch from Changli Gao. Signed-off-by: NRoman Gushchin <klamm@yandex-team.ru> Reported-by: NChangli Gao <xiaosuo@gmail.com> Suggested-by: NEric Dumazet <edumazet@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Denis Kirjanov 提交于
[ 198.720048] ------------[ cut here ]------------ [ 198.720108] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:255 dev_watchdog+0x229/0x240() [ 198.720118] NETDEV WATCHDOG: eth0 (sis900): transmit queue 0 timed out [ 198.720125] Modules linked in: bridge stp llc dmfe sundance 3c59x sis900 mii [ 198.720159] CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc3+ #12 [ 198.720167] Hardware name: System Manufacturer System Name/TUSI-M, BIOS ASUS TUSI-M ACPI BIOS Revision 1013 Beta 001 12/14/2001 [ 198.720175] 000000ff c13fa6b9 c169ddcc c12208d6 c169ddf8 c1031e4d c1664a84 c169de24 [ 198.720197] 00000000 c165f5ea 000000ff c13fa6b9 00000001 000000ff c1664a84 c169de10 [ 198.720217] c1031f13 00000009 c169de08 c1664a84 c169de24 c169de50 c13fa6b9 c165f5ea [ 198.720240] Call Trace: [ 198.720257] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720274] [<c12208d6>] dump_stack+0x16/0x20 [ 198.720306] [<c1031e4d>] warn_slowpath_common+0x7d/0xa0 [ 198.720318] [<c13fa6b9>] ? dev_watchdog+0x229/0x240 [ 198.720330] [<c1031f13>] warn_slowpath_fmt+0x33/0x40 [ 198.720342] [<c13fa6b9>] dev_watchdog+0x229/0x240 [ 198.720357] [<c103f158>] call_timer_fn+0x78/0x150 [ 198.720369] [<c103f0e0>] ? internal_add_timer+0x40/0x40 [ 198.720381] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720392] [<c103f33f>] run_timer_softirq+0x10f/0x200 [ 198.720412] [<c103954f>] ? __do_softirq+0x6f/0x210 [ 198.720424] [<c13fa490>] ? dev_init_scheduler+0xa0/0xa0 [ 198.720435] [<c1039598>] __do_softirq+0xb8/0x210 [ 198.720467] [<c14b54d2>] ? _raw_spin_unlock+0x22/0x30 [ 198.720484] [<c1003245>] ? handle_irq+0x25/0xd0 [ 198.720496] [<c1039c0c>] irq_exit+0x9c/0xb0 [ 198.720508] [<c14bc9d7>] do_IRQ+0x47/0x94 [ 198.720534] [<c1056078>] ? hrtimer_start+0x28/0x30 [ 198.720564] [<c14bc8b1>] common_interrupt+0x31/0x38 [ 198.720589] [<c1008692>] ? default_idle+0x22/0xa0 [ 198.720600] [<c10083c7>] arch_cpu_idle+0x17/0x30 [ 198.720631] [<c106d23d>] cpu_startup_entry+0xcd/0x180 [ 198.720643] [<c14ae30a>] rest_init+0xaa/0xb0 [ 198.720654] [<c14ae260>] ? reciprocal_value+0x50/0x50 [ 198.720668] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720679] [<c1704bda>] start_kernel+0x29a/0x350 [ 198.720690] [<c17044e0>] ? repair_env_string+0x60/0x60 [ 198.720721] [<c1704269>] i386_start_kernel+0x39/0xa0 [ 198.720729] ---[ end trace 81e0a6266f5c73a8 ]--- [ 198.720740] eth0: Transmit timeout, status 00000204 00000000 timer routine checks the link status and if it's up calls netif_carrier_on() allowing upper layer to start the tx queue even if the auto-negotiation process is not finished. Also remove ugly auto-negotiation check from the sis900_start_xmit() CC: Duan Fugang <B38611@freescale.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband由 Linus Torvalds 提交于
Pull infiniband/rdma fixes from Roland Dreier: - Fixes for the newly merged mlx5 hardware driver - Stack info leak fixes from Dan Carpenter - Fixes for pkey table handling with SR-IOV - A few other small things * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IPoIB: Fix pkey change flow for virtualization environments IPoIB: Make sure child devices use valid/proper pkeys IB/core: Create QP1 using the pkey index which contains the default pkey mlx5_core: Variable may be used uninitialized mlx5_core: Implement new initialization sequence mlx5_core: Fix use after free in mlx5_cmd_comp_handler() IB/mlx5: Fix stack info leak in mlx5_ib_alloc_ucontext() IB/mlx5: Fix error return code in init_one() IB/mlx4: Use default pkey when creating tunnel QPs RDMA/cma: Only call cma_save_ib_info() for CM REQs RDMA/cma: Fix accessing invalid private data for UD RDMA/cma: Fix gcc warning Revert "RDMA/nes: Fix compilation error when nes_debug is enabled" IB/qib: Add err_decode() call for ring dump RDMA/cxgb3: Fix stack info leak in iwch_create_cq() RDMA/nes: Fix info leaks in nes_create_qp() and nes_create_cq() RDMA/ocrdma: Fix several stack info leaks RDMA/cxgb4: Fix stack info leak in c4iw_create_qp() RDMA/ocrdma: Remove unused include
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio由 Linus Torvalds 提交于
Pull GPIO fixes from Linus Walleij: "Yet another GPIO pull request, fixing the fix from the last one. It turns out that fixing the boot path for device tree boots on OMAP breaks out antique systems (such as OMAP1) and we need to find a better way. So we're reverting that "fix" for the moment and thinking about something better. Also fixing a build issue on the MSM driver" * tag 'gpio-for-v3.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio_msm: Fix build error due to missing err.h Revert "gpio/omap: don't create an IRQ mapping for every GPIO on DT" Revert "gpio/omap: auto request GPIO as input if used as IRQ via DT" Revert "gpio/omap: fix build error when OF_GPIO is not defined."
-
由 Daniel Borkmann 提交于
Commit 5c766d64 ("ipv4: introduce address lifetime") leaves the ifa resource that was allocated via inet_alloc_ifa() unfreed when returning the function with -EINVAL. Thus, free it first via inet_free_ifa(). Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Reviewed-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lekensteyn 提交于
This message was added in commit a7154cb8 (June 2004, [PATCH] r8169: link handling and phy reset rework) and is printed every ten seconds when no cable is connected and runtime power management is disabled. (Before that commit, "Reset RTL8169s PHY" would be printed instead.) Signed-off-by: NPeter Wu <lekensteyn@gmail.com> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Felipe Balbi 提交于
IRQF_DISABLED is a no-op by now and should be removed. Signed-off-by: NFelipe Balbi <balbi@ti.com> Acked-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-