- 28 6月, 2014 14 次提交
-
-
由 David S. Miller 提交于
Jon Maloy says: ==================== tipc: new unicast transmission code As a step towards making the data transmission code more maintainable and performant, we introduce a number of new functions, both for building, sending and rejecting messages. The new functions will eventually be used for alla data transmission, user data unicast, service internal messaging, and multicast/broadcast. We start with this series, where we introduce the functions, and let user data unicast and the internal connection protocol use them. The remaining users will come in a later series. There are only minor changes to data structures, and no protocol changes, so the older functions can still be used in parallel for some time. Until the old functions are removed, we use temporary names for the new functions, such as tipc_build_msg2, tipc_link_xmit2. It should be noted that the first two commits are unrelated to the rest of the series. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
As a consequence of the recently introduced serialized access to the socket in commit 8d94168a761819d10252bab1f8de6d7b202c3baa ("tipc: same receive code path for connection protocol and data messages") we can make a number of simplifications in the detection and handling of connection congestion situations. - We don't need to keep two counters, one for sent messages and one for acked messages. There is no longer any risk for races between acknowledge messages arriving in BH and data message sending running in user context. So we merge this into one counter, 'sent_unacked', which is incremented at sending and subtracted from at acknowledge reception. - We don't need to set the 'congested' field in tipc_port to true before we sent the message, and clear it when sending is successful. (As a matter of fact, it was never necessary; the field was set in link_schedule_port() before any wakeup could arrive anyway.) - We keep the conditions for link congestion and connection connection congestion separated. There would otherwise be a risk that an arriving acknowledge message may wake up a user sleeping because of link congestion. - We can simplify reception of acknowledge messages. We also make some cosmetic/structural changes: - We rename the 'congested' field to the more correct 'link_cong´. - We rename 'conn_unacked' to 'rcv_unacked' - We move the above mentioned fields from struct tipc_port to struct tipc_sock. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
We simplify the code for receiving connection probes, leveraging the recently introduced tipc_msg_reverse() function. We also stick to the principle of sending a possible response message directly from the calling (tipc_sk_rcv or backlog_rcv) functions, hence making the call chain shallower and easier to follow. We make one small protocol change here, allowed according to the spec. If a protocol message arrives from a remote socket that is not the one we are connected to, we are currently generating a connection abort message and send it to the source. This behavior is unnecessary, and might even be a security risk, so instead we now choose to only ignore the message. The consequnce for the sender is that he will need longer time to discover his mistake (until the next timeout), but this is an extreme corner case, and may happen anyway under other circumstances, so we deem this change acceptable. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
As a preparation to eliminate port_lock we need to bring reception of connection protocol messages under proper protection of bh_lock_sock or socket owner. We fix this by letting those messages follow the same code path as incoming data messages. As a side effect of this change, the last reference to the function net_route_msg() disappears, and we can eliminate that function. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Several functions in port.c, related to the port protocol and connection shutdown, need to send messages. We now convert them to use the new link send function. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
We move the message sending across established connections to use the message preparation and send functions introduced earlier in this series. We now do the message preparation and call to the link send function directly from the socket, instead of going via the port layer. As a consequence of this change, the functions tipc_send(), tipc_port_iovec_rcv(), tipc_port_iovec_reject() and tipc_reject_msg() become unreferenced and can be eliminated from port.c. For the same reason, the functions tipc_link_xmit_fast(), tipc_link_iovec_xmit_long() and tipc_link_iovec_fast() can be eliminated from link.c. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
We merge the code for sending port name and port identity addressed messages into the corresponding send functions in socket.c, and start using the new fragmenting and transmit functions we just have introduced. This saves a call level and quite a few code lines, as well as making this part of the code easier to follow. As a consequence, the functions tipc_send2name() and tipc_send2port() in port.c can be removed. For practical reasons, we break out the code for sending multicast messages from tipc_sendmsg() and move it into a separate function, tipc_sendmcast(), but we do not yet convert it into using the new build/send functions. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
When a message arrives in a node and finds no destination socket, we may need to drop it, reject it, or forward it after a secondary destination lookup. The latter two cases currently results in a code path that is perceived as complex, because it follows a deep call chain via obscure functions such as net_route_named_msg() and net_route_msg(). We now introduce a function, tipc_msg_eval(), that takes the decision about whether such a message should be rejected or forwarded, but leaves it to the caller to actually perform the indicated action. If the decision is 'reject', it is still the task of the recently introduced function tipc_msg_reverse() to take the final decision about whether the message is rejectable or not. In the latter case it drops the message. As a result of this change, we can finally eliminate the function net_route_named_msg(), and hence become independent of net_route_msg(). Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The way we build and send rejected message is currenty perceived as hard to follow, partly because we let the transmission go via deep call chains through functions such as tipc_reject_msg() and net_route_msg(). We want to remove those functions, and make the call sequences shallower and simpler. For this purpose, we separate building and sending of rejected messages. We build the reject message using the new function tipc_msg_reverse(), and let the transmission go via the newly introduced tipc_link_xmit2() function, as all transmission eventually will do. We also ensure that all calls to tipc_link_xmit2() are made outside port_lock/bh_lock_sock. Finally, we replace all calls to tipc_reject_msg() with the two new calls at all locations in the code that we want to keep. The remaining calls are made from code that we are planning to remove, along with tipc_reject_msg() itself. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Fragmentation at message sending is currently performed in two places in link.c, depending on whether data to be transmitted is delivered in the form of an iovec or as a big sk_buff. Those functions are also tightly entangled with the send functions that are using them. We now introduce a re-entrant, standalone function, tipc_msg_build2(), that builds a packet chain directly from an iovec. Each fragment is sized according to the MTU value given by the caller, and is prepended with a correctly built fragment header, when needed. The function is independent from who is calling and where the chain will be delivered, as long as the caller is able to indicate a correct MTU. The function is tested, but not called by anybody yet. Since it is incompatible with the existing tipc_msg_build(), and we cannot yet remove that function, we have given it a temporary name. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
Message fragmentation is currently performed at link level, inside the protection of node_lock. This potentially binds up the sending link structure for a long time, instead of letting it do other tasks, such as handle reception of new packets. In this commit, we make the MTUs of each active link become easily accessible from the socket level, i.e., without taking any spinlock or dereferencing the target link pointer. This way, we make it possible to perform fragmentation in the sending socket, before sending the whole fragment chain to the link for transport. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
The current link implementation provides several different transmit functions, depending on the characteristics of the message to be sent: if it is an iovec or an sk_buff, if it needs fragmentation or not, if the caller holds the node_lock or not. The permutation of these options gives us an unwanted amount of unnecessarily complex code. As a first step towards simplifying the send path for all messages, we introduce two new send functions at link level, tipc_link_xmit2() and __tipc_link_xmit2(). The former looks up a link to the message destination, and if one is found, it grabs the node lock and calls the second function, which works exclusively inside the node lock protection. If no link is found, and the destination is on the same node, it delivers the message directly to the local destination socket. The new functions take a buffer chain where all packet headers are already prepared, and the correct MTU has been used. These two functions will later replace all other link-level transmit functions. The functions are not backwards compatible, so we have added them as new functions with temporary names. They are tested, but have no users yet. Those will be added later in this series. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In some places, TIPC functions returns positive integers as return codes. This goes against standard Linux coding practice, and may even cause problems in some cases. We now change the return values of the functions filter_rcv() and filter_connect() to become signed integers, and return negative error codes when needed. The codes we use in these particular cases are still TIPC specific, since they are both part of the TIPC API and have no correspondence in errno.h Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Paul Maloy 提交于
In the function tipc_nodesub_notify() we call a function pointer aggregated into the object to be notified, whereafter we set the function pointer to NULL. However, in some cases the function pointed to will free the struct containing the function pointer, resulting in a write to already freed memory. This bug seems to always have been there, without causing any notable harm. In this commit we fix the problem by inverting the order of the zeroing and the function call. Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2014 7 次提交
-
-
由 David S. Miller 提交于
Tom Lendacky says: ==================== amd-xgbe: AMD 10Gb Ethernet driver updates The following series fixes some bugs and provides new/changed support in the driver. - Make all the defines in the xgbe.h file unique by prefixing them with XGBE_ if they are not currently using the prefix. - VLAN CTAGs are supplied in context descriptors. Tell the hardware to look in the Tx context descriptor, and not a register, for the VLAN CTAG to be inserted in the packet. - The hardware will indicate a VLAN packet has been received even if VLAN CTAG stripping is currently disabled. Only indicate that a VLAN CTAG has been stripped for the current packet if stripping is enabled. - Add support for VLAN filtering - Modify destination address filtering to use the hardware hash tables - Eliminate a checkpatch warning by replacing sscanf with kstrtouint This patch series is based on net-next. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Checkpatch issued a warning preferring to use kstrto<type> when using a single variable sscanf. Change the sscanf invocation to a kstrtouint call. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
Currently the driver makes use of the additional mac address registers in the hardware to provide perfect filtering. The hardware can also have a set of hash table registers that can be used for imperfect filtering. By using imperfect filtering the additional mac address registers can be used for layer 2 filtering support. Use the hash table registers if the device has them. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
This patch adds support for (imperfect) filtering of VLAN tag ids using a 16-bit filter hash table. When VLANs are added, a 4-bit hash is calculated with the result indicating the bit in the hash table to set. This table is used by the hardware to drop packets with a VLAN id that does not hash to a set bit in the table. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
When receiving a VLAN packet check to be sure that VLAN RX CTAG stripping is enabled before indicating that the tag has been stripped in the packet information data structure. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
The MAC_VLAN_Incl register (0x0060) must be set to indicate that the VLAN tag to be inserted comes from a Tx context descriptor and not the MAC_VLAN_Incl register. Also, even though it is the default, explicitly set the type of tag to be inserted as a CTAG. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lendacky, Thomas 提交于
In order to avoid conflicts with other include files, add a prefix to the defines in xgbe.h. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2014 19 次提交
-
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull CIFS fixes from Steve French: "Small set of misc cifs/smb3 fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: [CIFS] fix mount failure with broken pathnames when smb3 mount with mapchars option cifs: revalidate mapping prior to satisfying read_iter request with cache=loose fs/cifs: fix regression in cifs_create_mf_symlink()
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: "Various minor fixes" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (gpio-fan) Change name used in hwmon_device_register_with_groups hwmon: (emc1403) Fix missing 'select REGMAP_I2C' in Kconfig hwmon: (ntc_thermistor) Use the manufacturer name properly devicetree: bindings: Document murata vendor prefix hwmon: (w83l786ng) Report correct minimum fan speed
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix crash in ipvs tot_stats estimator, from Julian Anastasov. 2) Fix OOPS in nf_nat on netns removal, from Florian Westphal. 3) Really really really fix locking issues in slip and slcan tty write wakeups, from Tyler Hall. 4) Fix checksum offloading in fec driver, from Fugang Duan. 5) Off by one in BPF instruction limit test, from Kees Cook. 6) Need to clear all TSO capability flags when doing software TSO in tg3 driver, from Prashant Sreedharan. 7) Fix memory leak in vlan_reorder_header() error path, from Li RongQing. 8) Fix various bugs in xen-netfront and xen-netback multiqueue support, from David Vrabel and Wei Liu. 9) Fix deadlock in cxgb4 driver, from Li RongQing. 10) Prevent double free of no-cache DST entries, from Eric Dumazet. 11) Bad csum_start handling in skb_segment() leads to crashes when forwarding, from Tom Herbert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: fix setting csum_start in skb_segment() ipv4: fix dst race in sk_dst_get() net: filter: Use kcalloc/kmalloc_array to allocate arrays trivial: net: filter: Change kerneldoc parameter order trivial: net: filter: Fix typo in comment net: allwinner: emac: Add missing free_irq cxgb4: use dev_port to identify ports xen-netback: bookkeep number of active queues in our own module tg3: Change nvram command timeout value to 50ms cxgb4: Not need to hold the adap_rcu_lock lock when read adap_rcu_list be2net: fix qnq mode detection on VFs of: mdio: fixup of_phy_register_fixed_link parsing of new bindings at86rf230: fix irq setup net: phy: at803x: fix coccinelle warnings net/mlx4_core: Fix the error flow when probing with invalid VF configuration tulip: Poll link status more frequently for Comet chips net: huawei_cdc_ncm: increase command buffer size drivers: net: cpsw: fix dual EMAC stall when connected to same switch xen-netfront: recreate queues correctly when reconnecting xen-netfront: fix oops when disconnected from backend ...
-
由 Tom Herbert 提交于
Dave Jones reported that a crash is occurring in csum_partial tcp_gso_segment inet_gso_segment ? update_dl_migration skb_mac_gso_segment __skb_gso_segment dev_hard_start_xmit sch_direct_xmit __dev_queue_xmit ? dev_hard_start_xmit dev_queue_xmit ip_finish_output ? ip_output ip_output ip_forward_finish ip_forward ip_rcv_finish ip_rcv __netif_receive_skb_core ? __netif_receive_skb_core ? trace_hardirqs_on __netif_receive_skb netif_receive_skb_internal napi_gro_complete ? napi_gro_complete dev_gro_receive ? dev_gro_receive napi_gro_receive It looks like a likely culprit is that SKB_GSO_CB()->csum_start is not set correctly when doing non-scatter gather. We are using offset as opposed to doffset. Reported-by: NDave Jones <davej@redhat.com> Tested-by: NDave Jones <davej@redhat.com> Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Fixes: 7e2b10c1 ("net: Support for multiple checksums with gso") Acked-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.linux-nfs.org/projects/trondmy/linux-nfs由 Linus Torvalds 提交于
Pull NFS client fixes from Trond Myklebust: "Highlights include: - Stable fix for a data corruption case due to incorrect cache validation - Fix a couple of false positive cache invalidations - Fix NFSv4 security negotiation issues" * tag 'nfs-for-3.16-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFSv4: test SECINFO RPC_AUTH_GSS pseudoflavors for support NFS Return -EPERM if no supported or matching SECINFO flavor NFS check the return of nfs4_negotiate_security in nfs4_submount NFS: Don't mark the data cache as invalid if it has been flushed NFS: Clear NFS_INO_REVAL_PAGECACHE when we update the file size nfs: Fix cache_validity check in nfs_write_pageuptodate()
-
由 Geert Uytterhoeven 提交于
If CONFIG_RFS_ACCEL=n: drivers/net/ethernet/cisco/enic/enic_main.c: In function 'enic_open': drivers/net/ethernet/cisco/enic/enic_main.c:1603:2: error: implicit declaration of function 'enic_rfs_flw_tbl_init' [-Werror=implicit-function-declaration] drivers/net/ethernet/cisco/enic/enic_main.c: In function 'enic_stop': drivers/net/ethernet/cisco/enic/enic_main.c:1630:2: error: implicit declaration of function 'enic_rfs_flw_tbl_free' [-Werror=implicit-function-declaration] Introduced in commit a145df23 ("enic: Add Accelerated RFS support"). Dummy functions are provided, but their prototypes are missing, causing the build failure. Provide dummy static inline functions instead to fix this. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Erik Hugne 提交于
The maximum window size is limited by the sequence gap field, which was expanded with bd784533 ("tipc: Expand link sequence gap field to 13 bits") We remove the artificial limit that prevents the link window to be set larger than 150. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next由 David S. Miller 提交于
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-06-24 This series contains updates to i40e and i40evf. Greg provides a patch to stop the VF device after setting its MAC address. This is due to if the host VMM administrator has changed the VF device's MAC address then the i40e driver needs to halt the VF device so that the administrator will be forced to reload the VF driver so that the VF driver will start using the newly assigned MAC address. Shannon provides several patches for i40e, first makes prep_for_test() a void function since the return value was being ignored for the most part by all its callers. Adds a log warning when the firmware's API minor/major number is not what we expect to assist the user by informing them they may need to update their NVM or SW. Cleans up a stray print message so that it is similar to other print messages. Ensures to set the WoL flag when setting LAA and allow the user to set LAA again. So do not short-circuit the LAA assignment when the driver thinks it has already been done as it is possible that the user might want to force the address setting again. Provides a couple more LAA fixes to ensure the LAA gets restored after resets. Neerav provides a patch for i40e to add a PF reset when a malicious driver event for the PF occurs. As per the specification when the PF driver receives a malicious driver event the queue that caused the event is already stopped and it is expected that the function that owns the queue will reset the queue, but in some cases it may not be possible to determine the queue, so it is suggested to reset the whole function. Carolyn fixes ethtool coalesce settings to allow 0 as a disable value and adds message to user about invalid values. Jesse removes a reserved type which was not removed from the code. Catherine provides a patch to add the ability to enable/disable link from set_link)restart_an() which will make it easy to toggle link without calling set_phy_config() when no other link settings need to change. Anjali provides a patch to ensure we do a PF reset on Tx hang and that way we avoid any Malicious Driver Detect (MDD) events because of a Tx queue disable failure. v2: - fixed the un-needed return in patch 2 based on feedback from Sergei Shtylyov - added punctuation to print statements and code comment based on feedback from Sergei Shtylyov ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Use bool instead of int as the return type. All uses are tested with !. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When IP route cache had been removed in linux-3.6, we broke assumption that dst entries were all freed after rcu grace period. DST_NOCACHE dst were supposed to be freed from dst_release(). But it appears we want to keep such dst around, either in UDP sockets or tunnels. In sk_dst_get() we need to make sure dst refcount is not 0 before incrementing it, or else we might end up freeing a dst twice. DST_NOCACHE set on a dst does not mean this dst can not be attached to a socket or a tunnel. Then, before actual freeing, we need to observe a rcu grace period to make sure all other cpus can catch the fact the dst is no longer usable. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NDormando <dormando@rydia.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Use kcalloc/kmalloc_array to make it clear we're allocating arrays. No integer overflow can actually happen here, since len/flen is guaranteed to be less than BPF_MAXINSNS (4096). However, this changed makes sure we're not going to get one if BPF_MAXINSNS were ever increased. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Change the order of the parameters to sk_unattached_filter_create() in the kerneldoc to reflect the order they appear in the actual function. This fix is only cosmetic, in the generated doc they still appear in the correct order without the fix. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Klauser 提交于
Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It seems overkill to use vmalloc() for typical listeners with less than 2048 hash buckets. Try kmalloc() and fallback to vmalloc() to reduce TLB pressure. Use kvfree() helper as it is now available. Use ilog2() instead of a loop. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 WANG Cong 提交于
It is trivial to add netpoll support to veth, since it is not a stacked device, we don't need to setup and clean up netpoll. Reported-by: NStefan Priebe <s.priebe@profihost.ag> Cc: "David S. Miller" <davem@davemloft.net> Cc: Neil Horman <nhorman@tuxdriver.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maxime Ripard 提交于
If the mdio probe function fails in emac_open, the interrupt we just requested isn't freed. If emac_open is called again, for example because we try to set up the interface again, the kernel will oops because the interrupt wasn't properly released. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Cc: <stable@vger.kernel.org> # 3.11+ Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Jitendra Kalsaria says: ==================== Rebranding changes for bnx2 and cnic driver The following set of patches are for rebranding Broadcom bnx2 and cnic driver as QLogic drivers. Please apply this series to net-next. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>