- 31 7月, 2020 5 次提交
-
-
由 Nick Terrell 提交于
Bump the ZO_z_extra_bytes margin for zstd. Zstd needs 3 bytes per 128 KB, and has a 22 byte fixed overhead. Zstd needs to maintain 128 KB of space at all times, since that is the maximum block size. See the comments regarding in-place decompression added in lib/decompress_unzstd.c for details. The existing code is written so that all the compression algorithms use the same ZO_z_extra_bytes. It is taken to be the maximum of the growth rate plus the maximum fixed overhead. The comments just above this diff state that: Signed-off-by: NNick Terrell <terrelln@fb.com> Signed-off-by: NIngo Molnar <mingo@kernel.org> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Reviewed-by: NKees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-6-nickrterrell@gmail.com
-
由 Nick Terrell 提交于
- Add support for a zstd compressed initramfs. - Add compression for compressing built-in initramfs with zstd. I have tested this patch by boot testing with buildroot and QEMU. Specifically, I booted the kernel with both a zstd and gzip compressed initramfs, both built into the kernel and separate. I ensured that the correct compression algorithm was used. I tested on arm, aarch64, i386, and x86_64. This patch has been tested in production on aarch64 and x86_64 devices. Additionally, I have performance measurements from internal use in production. On an aarch64 device we saw 19 second boot time improvement from switching from lzma to zstd (27 seconds to 8 seconds). On an x86_64 device we saw a 9 second boot time reduction from switching from xz to zstd. Signed-off-by: NNick Terrell <terrelln@fb.com> Signed-off-by: NIngo Molnar <mingo@kernel.org> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Reviewed-by: NKees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-5-nickrterrell@gmail.com
-
由 Nick Terrell 提交于
- Add the zstd and zstd22 cmds to scripts/Makefile.lib - Add the HAVE_KERNEL_ZSTD and KERNEL_ZSTD options Architecture specific support is still needed for decompression. Signed-off-by: NNick Terrell <terrelln@fb.com> Signed-off-by: NIngo Molnar <mingo@kernel.org> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Reviewed-by: NKees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-4-nickrterrell@gmail.com
-
由 Nick Terrell 提交于
- Add unzstd() and the zstd decompress interface. - Add zstd support to decompress_method(). The decompress_method() and unzstd() functions are used to decompress the initramfs and the initrd. The __decompress() function is used in the preboot environment to decompress a zstd compressed kernel. The zstd decompression function allows the input and output buffers to overlap because that is used by x86 kernel decompression. Signed-off-by: NNick Terrell <terrelln@fb.com> Signed-off-by: NIngo Molnar <mingo@kernel.org> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Reviewed-by: NKees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-3-nickrterrell@gmail.com
-
由 Nick Terrell 提交于
These changes are necessary to get the build to work in the preboot environment, and to get reasonable performance: - Remove a double definition of the CHECK_F macro when the zstd library is amalgamated. - Switch ZSTD_copy8() to __builtin_memcpy(), because in the preboot environment on x86 gcc can't inline `memcpy()` otherwise. - Limit the gcc hack in ZSTD_wildcopy() to the broken gcc version. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81388. ZSTD_copy8() and ZSTD_wildcopy() are in the core of the zstd hot loop. So outlining these calls to memcpy(), and having an extra branch are very detrimental to performance. Signed-off-by: NNick Terrell <terrelln@fb.com> Signed-off-by: NIngo Molnar <mingo@kernel.org> Tested-by: NSedat Dilek <sedat.dilek@gmail.com> Reviewed-by: NKees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200730190841.2071656-2-nickrterrell@gmail.com
-
- 27 7月, 2020 8 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into master Pull Kbuild fixes from Masahiro Yamada: - do not use non-portable strsep() in a host program - fix single target builds for external modules - change Clang's --prefix option to make it work for the latest Clang * tag 'kbuild-fixes-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation kbuild: fix single target builds for external modules modpost: remove use of non-standard strsep() in HOSTCC code
-
由 Linus Torvalds 提交于
Merge branch 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux into master Pull parisc fixes from Helge Deller: "Two fixes: - Add the cmpxchg() function for pointers to u8 values. This fixes a kernel linking error when building the tusb1210 driver (from Liam Beguin). - Add a define for atomic64_set_release() to fix CPU soft lockups which happen because of missing unlocks while processing bit operations (from John David Anglin)" * 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Add atomic64_set_release() define to avoid CPU soft lockups parisc: add support for cmpxchg on u8 pointers
-
由 Linus Torvalds 提交于
Merge tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc into master Pull char/misc driver fixes from Greg KH: "Here are a few small driver fixes for 5.8-rc7 They include: - habanalabs fixes - tiny fpga driver fixes - /dev/mem fixup from previous changes - interconnect driver fixes - binder fix All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: interconnect: msm8916: Fix buswidth of pcnoc_s nodes interconnect: Do not skip aggregation for disabled paths /dev/mem: Add missing memory barriers for devmem_inode binder: Don't use mmput() from shrinker function. habanalabs: prevent possible out-of-bounds array access fpga: dfl: fix bug in port reset handshake fpga: dfl: pci: reduce the scope of variable 'ret' habanalabs: set 4s timeout for message to device CPU habanalabs: set clock gating per engine habanalabs: block WREG_BULK packet on PDMA
-
由 Linus Torvalds 提交于
Merge tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into master Pull driver core fix from Greg KH: "A single driver core fix for 5.8-rc7. It resolves a problem found in the previous fix for this code made in 5.8-rc6. Hopefully this is all now cleared up, as this seems to be the last of the reported issues in this area, and was tested on the problem hardware. This patch has been in linux-next with no reported problems" * tag 'driver-core-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: device property: Avoid NULL pointer dereference in device_get_next_child_node()
-
由 Linus Torvalds 提交于
Merge tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging into master Pull staging driver fixes from Greg KH: "Five small staging driver fixes for 5.8-rc7 to resolve some reported problems: - four comedi driver fixes for problems found with them - a syzbot-found fix for the wlang-ng driver that resolves a much reported problem. All of these have been in linux-next with no reported issues" * tag 'staging-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: wlan-ng: properly check endpoint types staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull tty/serial/fbcon fixes from Greg KH: "Here are some small tty and serial and fbcon fixes for 5.8-rc7 to resolve some reported issues. The fbcon fix is in here as it was simpler to take it this way (and it was acked by the maintainer) as it was related to the vt console fix as well, both of which resolve syzbot-found issues in the console handling code. The other serial driver fixes are for small issues reported in the -rc releases. All of these have been in linux-next with no reported issues" * tag 'tty-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: exar: Fix GPIO configuration for Sealevel cards based on XR17V35X fbdev: Detect integer underflow at "struct fbcon_ops"->clear_margins. serial: 8250_mtk: Fix high-speed baud rates clamping serial: 8250: fix null-ptr-deref in serial8250_start_tx() serial: tegra: drop bogus NULL tty-port checks serial: tegra: fix CREAD handling for PIO tty: xilinx_uartps: Really fix id assignment vt: Reject zero-sized screen buffer size.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB fixes from Greg KH: "Three small USB XHCI driver fixes for 5.8-rc7. They all resolve some minor issues that have been reported on some different platforms. All of these have been in linux-next with no reported issues" * tag 'usb-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: tegra: Fix allocation for the FPCI context usb: xhci: Fix ASM2142/ASM3142 DMA addressing usb: xhci-mtk: fix the failure of bandwidth allocation
-
- 26 7月, 2020 9 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI fix from James Bottomley: "Small core patch to fix a corner case bug: we forgot to run the queues to handle starvation in the error exit from the scsi_queue_rq routine, which can lead to hangs on error conditions" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: core: Run queue in case of I/O resource contention failure
-
由 Linus Torvalds 提交于
Merge tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master Pull RISC-V fixes from Palmer Dabbelt: "A few more fixes this week: - A fix to avoid using SBI calls during kasan initialization, as the SBI calls themselves have not been probed yet. - Three fixes related to systems with multiple memory regions" * tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Parse all memory blocks to remove unusable memory RISC-V: Do not rely on initrd_start/end computed during early dt parsing RISC-V: Set maximum number of mapped pages correctly riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence
-
由 Linus Torvalds 提交于
Merge tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull x86 fixes from Ingo Molnar: "Misc fixes: - Fix a section end page alignment assumption that was causing crashes - Fix ORC unwinding on freshly forked tasks which haven't executed yet and which have empty user task stacks - Fix the debug.exception-trace=1 sysctl dumping of user stacks, which was broken by recent maccess changes" * tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/dumpstack: Dump user space code correctly again x86/stacktrace: Fix reliable check for empty user task stacks x86/unwind/orc: Fix ORC for newly forked tasks x86, vmlinux.lds: Page-align end of ..page_aligned sections
-
由 Linus Torvalds 提交于
Merge tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull uprobe fix from Ingo Molnar: "Fix an interaction/regression between uprobes based shared library tracing & GDB" * tag 'perf-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
-
由 Linus Torvalds 提交于
Merge tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull timer fix from Ingo Molnar: "Fix a suspend/resume regression (crash) on TI AM3/AM4 SoC's" * tag 'timers-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4
-
由 Linus Torvalds 提交于
Merge tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull scheduler fixes from Ingo Molnar: "Fix a race introduced by the recent loadavg race fix, plus add a debug check for a hard to debug case of bogus wakeup function flags" * tag 'sched-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Warn if garbage is passed to default_wake_function() sched: Fix race against ptrace_freeze_trace()
-
由 Linus Torvalds 提交于
Merge tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master Pull EFI fixes from Ingo Molnar: "Various EFI fixes: - Fix the layering violation in the use of the EFI runtime services availability mask in users of the 'efivars' abstraction - Revert build fix for GCC v4.8 which is no longer supported - Clean up some x86 EFI stub details, some of which are borderline bugs that copy around garbage into padding fields - let's fix these out of caution. - Fix build issues while working on RISC-V support - Avoid --whole-archive when linking the stub on arm64" * tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Revert "efi/x86: Fix build with gcc 4" efi/efivars: Expose RT service availability via efivars abstraction efi/libstub: Move the function prototypes to header file efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds efi/libstub/arm64: link stub lib.a conditionally efi/x86: Only copy upto the end of setup_header efi/x86: Remove unused variables
-
git://git.samba.org/sfrench/cifs-2.6由 Linus Torvalds 提交于
Pull cifs fix from Steve French: "A fix for a recently discovered regression in rename to older servers caused by a recent patch" * tag '5.8-rc6-cifs-fix' of git://git.samba.org/sfrench/cifs-2.6: Revert "cifs: Fix the target file was deleted when rename failed."
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix RCU locaking in iwlwifi, from Johannes Berg. 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau. 3) Fix race in updating pause settings in bnxt_en, from Vasundhara Volam. 4) Propagate error return properly during unbind failures in ax88172a, from George Kennedy. 5) Fix memleak in adf7242_probe, from Liu Jian. 6) smc_drv_probe() can leak, from Wang Hai. 7) Don't muck with the carrier state if register_netdevice() fails in the bonding driver, from Taehee Yoo. 8) Fix memleak in dpaa_eth_probe, from Liu Jian. 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from Murali Karicheri. 10) Don't lose ionic RSS hash settings across FW update, from Shannon Nelson. 11) Fix clobbered SKB control block in act_ct, from Wen Xu. 12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang. 13) IS_UDPLITE cleanup a long time ago, incorrectly handled transformations involving UDPLITE_RECV_CC. From Miaohe Lin. 14) Unbalanced locking in netdevsim, from Taehee Yoo. 15) Suppress false-positive error messages in qed driver, from Alexander Lobakin. 16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye. 17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost. 18) Uninitialized value in geneve_changelink(), from Cong Wang. 19) Fix deadlock in xen-netfront, from Andera Righi. 19) flush_backlog() frees skbs with IRQs disabled, so should use dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) drivers/net/wan: lapb: Corrected the usage of skb_cow dev: Defer free of skbs in flush_backlog qrtr: orphan socket in qrtr_release() xen-netfront: fix potential deadlock in xennet_remove() flow_offload: Move rhashtable inclusion to the source file geneve: fix an uninitialized value in geneve_changelink() bonding: check return value of register_netdevice() in bond_newlink() tcp: allow at most one TLP probe per flight AX.25: Prevent integer overflows in connect and sendmsg cxgb4: add missing release on skb in uld_send() net: atlantic: fix PTP on AQC10X AX.25: Prevent out-of-bounds read in ax25_sendmsg() sctp: shrink stream outq when fails to do addstream reconf sctp: shrink stream outq only when new outcnt < old outcnt AX.25: Fix out-of-bounds read in ax25_connect() enetc: Remove the mdio bus on PF probe bailout net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload net: ethernet: ave: Fix error returns in ave_init drivers/net/wan/x25_asy: Fix to make it work ipvs: fix the connection sync failed in some cases ...
-
- 25 7月, 2020 18 次提交
-
-
由 Atish Patra 提交于
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET. That's why we remove any memory blocks spanning beyond that size. However, it is done only for memblock containing linux kernel which will not work if there are multiple memblocks. Process all memory blocks to figure out how much memory needs to be removed and remove at the end instead of updating the memblock list in place. Signed-off-by: NAtish Patra <atish.patra@wdc.com> Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-
由 Atish Patra 提交于
Currently, initrd_start/end are computed during early_init_dt_scan but used during arch_setup. We will get the following panic if initrd is used and CONFIG_DEBUG_VIRTUAL is turned on. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] kernel BUG at arch/riscv/mm/physaddr.c:33! [ 0.000000] Kernel BUG [#1] [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-rc4-00015-ged0b226fed02 #886 [ 0.000000] epc: ffffffe0002058d2 ra : ffffffe0000053f0 sp : ffffffe001001f40 [ 0.000000] gp : ffffffe00106e250 tp : ffffffe001009d40 t0 : ffffffe00107ee28 [ 0.000000] t1 : 0000000000000000 t2 : ffffffe000a2e880 s0 : ffffffe001001f50 [ 0.000000] s1 : ffffffe0001383e8 a0 : ffffffe00c087e00 a1 : 0000000080200000 [ 0.000000] a2 : 00000000010bf000 a3 : ffffffe00106f3c8 a4 : ffffffe0010bf000 [ 0.000000] a5 : ffffffe000000000 a6 : 0000000000000006 a7 : 0000000000000001 [ 0.000000] s2 : ffffffe00106f068 s3 : ffffffe00106f070 s4 : 0000000080200000 [ 0.000000] s5 : 0000000082200000 s6 : 0000000000000000 s7 : 0000000000000000 [ 0.000000] s8 : 0000000080011010 s9 : 0000000080012700 s10: 0000000000000000 [ 0.000000] s11: 0000000000000000 t3 : 000000000001fe30 t4 : 000000000001fe30 [ 0.000000] t5 : 0000000000000000 t6 : ffffffe00107c471 [ 0.000000] status: 0000000000000100 badaddr: 0000000000000000 cause: 0000000000000003 [ 0.000000] random: get_random_bytes called from print_oops_end_marker+0x22/0x46 with crng_init=0 To avoid the error, initrd_start/end can be computed from phys_initrd_start/size in setup itself. It also improves the initrd placement by aligning the start and size with the page size. Fixes: 76d2a049 ("RISC-V: Init and Halt Code") Signed-off-by: NAtish Patra <atish.patra@wdc.com> Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-
由 Xie He 提交于
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers "lapbether" and "hdlc_x25": 1) After skb_cow fails, kfree_skb should be called to drop a reference to the skb. But in both drivers, kfree_skb is not called. 2) skb_cow should be called before skb_push so that is can ensure the safety of skb_push. But in "lapbether", it is incorrectly called after skb_push. More details about these 2 issues: 1) The behavior of calling kfree_skb on failure is also the behavior of netif_rx, which is called by this function with "return netif_rx(skb);". So this function should follow this behavior, too. 2) In "lapbether", skb_cow is called after skb_push. This results in 2 logical issues: a) skb_push is not protected by skb_cow; b) An extra headroom of 1 byte is ensured after skb_push. This extra headroom has no use in this function. It also has no use in the upper-layer function that this function passes the skb to (x25_lapb_receive_frame in net/x25/x25_dev.c). So logically skb_cow should instead be called before skb_push. Cc: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: NXie He <xie.he.0141@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here. Fixes: 145dd5f9 ("net: flush the softnet backlog in process context") Signed-off-by: NSubash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atish Patra 提交于
Currently, maximum number of mapper pages are set to the pfn calculated from the memblock size of the memblock containing kernel. This will work until that memblock spans the entire memory. However, it will be set to a wrong value if there are multiple memblocks defined in kernel (e.g. with efi runtime services). Set the the maximum value to the pfn calculated from dram size. Signed-off-by: NAtish Patra <atish.patra@wdc.com> Signed-off-by: NPalmer Dabbelt <palmerdabbelt@google.com>
-
由 Linus Torvalds 提交于
Merge tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into master Pull PCI fixes from Bjorn Helgaas: - Reject invalid IRQ 0 command line argument for virtio_mmio because IRQ 0 now generates warnings (Bjorn Helgaas) - Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms", which broke nouveau (Bjorn Helgaas) * tag 'pci-v5.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI/PM: Assume ports without DLL Link Active train links in 100 ms" virtio-mmio: Reject invalid IRQ 0 command line argument
-
由 Cong Wang 提交于
We have to detach sock from socket in qrtr_release(), otherwise skb->sk may still reference to this socket when the skb is released in tun->queue, particularly sk->sk_wq still points to &sock->wq, which leads to a UAF. Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59 ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-2020-07-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.8 Second set of fixes for v5.8, and hopefully also the last. Three important regressions fixed. ath9k * fix a regression which broke support for all ath9k usb devices ath10k * fix a regression which broke support for all QCA4019 AHB devices iwlwifi * fix a regression which broke support for some Killer Wireless-AC 1550 cards ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrea Righi 提交于
There's a potential race in xennet_remove(); this is what the driver is doing upon unregistering a network device: 1. state = read bus state 2. if state is not "Closed": 3. request to set state to "Closing" 4. wait for state to be set to "Closing" 5. request to set state to "Closed" 6. wait for state to be set to "Closed" If the state changes to "Closed" immediately after step 1 we are stuck forever in step 4, because the state will never go back from "Closed" to "Closing". Make sure to check also for state == "Closed" in step 4 to prevent the deadlock. Also add a 5 sec timeout any time we wait for the bus state to change, to avoid getting stuck forever in wait_event(). Signed-off-by: NAndrea Righi <andrea.righi@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://linux-nfs.org/~bfields/linux由 Linus Torvalds 提交于
Pull nfsd fix from Bruce Fields: "Just one fix for a NULL dereference if someone happens to read /proc/fs/nfsd/client/../state at the wrong moment" * tag 'nfsd-5.8-2' of git://linux-nfs.org/~bfields/linux: nfsd4: fix NULL dereference in nfsd/clients display code
-
由 Herbert Xu 提交于
I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to be rebuilt. This dependency came through a bogus inclusion in the file net/flow_offload.h. This patch moves it to the right place. This patch also removes a lingering rhashtable inclusion in cls_api created by the same commit. Fixes: 4e481908 ("flow_offload: move tc indirect block to...") Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Merge misc fixes from Andrew Morton: "Subsystems affected by this patch series: mm/pagemap, mm/shmem, mm/hotfixes, mm/memcg, mm/hugetlb, mailmap, squashfs, scripts, io-mapping, MAINTAINERS, and gdb" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: scripts/gdb: fix lx-symbols 'gdb.error' while loading modules MAINTAINERS: add KCOV section io-mapping: indicate mapping failure scripts/decode_stacktrace: strip basepath from all paths squashfs: fix length field overlap check in metadata reading mailmap: add entry for Mike Rapoport khugepaged: fix null-pointer dereference due to race mm/hugetlb: avoid hardcoding while checking if cma is enabled mm: memcg/slab: fix memory leak at non-root kmem_cache destroy mm/memcg: fix refcount error while moving and swapping mm/memcontrol: fix OOPS inside mem_cgroup_get_nr_swap_pages() mm: initialize return of vm_insert_pages vfs/xattr: mm/shmem: kernfs: release simple xattr entry in a right way mm/mmap.c: close race between munmap() and expand_upwards()/downwards()
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull xtensa csum regression fix from Al Viro: "Max Filippov caught a breakage introduced in xtensa this cycle by the csum_and_copy_..._user() series. Cut'n'paste from the wrong source - the check that belongs in csum_and_copy_to_user() ended up both there and in csum_and_copy_from_user()" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xtensa: fix access check in csum_and_copy_from_user
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fix from Will Deacon: "Fix compat vDSO build flags for recent versions of clang to tell it where to find the assembler" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: vdso32: Fix '--prefix=' value for newer versions of clang
-
由 Linus Torvalds 提交于
Merge tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into master Pull btrfs fixes from David Sterba: "A few resouce leak fixes from recent patches, all are stable material. The problems have been observed during testing or have a reproducer" * tag 'for-5.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: fix mount failure caused by race with umount btrfs: fix page leaks after failure to lock page for delalloc btrfs: qgroup: fix data leak caused by race between writeback and truncate btrfs: fix double free on ulist after backref resolution failure
-
由 Linus Torvalds 提交于
Merge tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs into master Pull zonefs fixes from Damien Le Moal: "Two fixes, the first one to remove compilation warnings and the second to avoid potentially inefficient allocation of BIOs for direct writes into sequential zones" * tag 'zonefs-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: count pages after truncating the iterator zonefs: Fix compilation warning
-
git://git.kernel.dk/linux-block由 Linus Torvalds 提交于
Pull io_uring fixes from Jens Axboe: - Fix discrepancy in how sqe->flags are treated for a few requests, this makes it consistent (Daniele) - Ensure that poll driven retry works with double waitqueue poll users - Fix a missing io_req_init_async() (Pavel) * tag 'io_uring-5.8-2020-07-24' of git://git.kernel.dk/linux-block: io_uring: missed req_init_async() for IOSQE_ASYNC io_uring: always allow drain/link/hardlink/async sqe flags io_uring: ensure double poll additions work with both request types
-
由 Linus Torvalds 提交于
Merge tag 'iommu-fix-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu into master Pull iommu fix from Joerg Roedel: "Fix a NULL-ptr dereference in the QCOM IOMMU driver" * tag 'iommu-fix-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/qcom: Use domain rather than dev as tlb cookie
-