- 19 9月, 2016 4 次提交
-
-
由 Hariprasad Shenai 提交于
Allocate resources dynamically to cxgb4's Upper layer driver's(ULD) like cxgbit, iw_cxgb4 and cxgb4i. Allocate resources when they register with cxgb4 driver and free them while unregistering. All the queues and the interrupts for them will be allocated during ULD probe only and freed during remove. Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
The XDP_TX action can fail transmitting the frame in case the TX ring is full or port is down. In case of TX failure it should drop the frame, and not as now call 'break' which is the same as XDP_PASS. Fixes: 9ecc2d86 ("net/mlx4_en: add xdp forwarding and data write support") Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: NBrenden Blanco <bblanco@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nogah Frankel 提交于
Change the default statistics ndo to return HW statistics (like the one returned by ethtool_ops). The HW stats are collected to a cache by delayed work every 1 sec. Implement the offload stat ndo. Add a function to get SW statistics, to be called from this function. Signed-off-by: NNogah Frankel <nogahf@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
A couple of dev_err messages span two lines and the literal string is missing a white space between words. Add the white space and join the two lines into one. Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NFLorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 9月, 2016 5 次提交
-
-
由 Julia Lawall 提交于
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 21623 1316 40 22979 59c3 drivers/net/ethernet/synopsys/dwc_eth_qos.o and after the change it is: text data bss dec hex filename 22199 724 40 22963 59b3 drivers/net/ethernet/synopsys/dwc_eth_qos.o Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 7995 848 8 8851 2293 drivers/net/ethernet/hisilicon/hip04_eth.o and after the change it is: text data bss dec hex filename 8571 256 8 8835 2283 drivers/net/ethernet/hisilicon/hip04_eth.o Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
Instead of reallocating and mapping pages for RX data-path, recycle already used pages in a per ring cache. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - order0 no cache * 4,786,899 - order0 with cache 1% gain Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - order0 no cache * 4,127,852 - order0 with cache 3.7% gain Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - order0 no cache * 3,931,708 - order0 with cache 5.4% gain Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
Manage the allocation and deallocation of mapped RX pages only through dedicated API functions. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
To improve the memory consumption scheme, we omit the flow that demands and splits high-order pages in Striding RQ, and stay with a single Striding RQ flow that uses order-0 pages. Moving to fragmented memory allows the use of larger MPWQEs, which reduces the number of UMR posts and filler CQEs. Moving to a single flow allows several optimizations that improve performance, especially in production servers where we would anyway fallback to order-0 allocations: - inline functions that were called via function pointers. - improve the UMR post process. This patch alone is expected to give a slight performance reduction. However, the new memory scheme gives the possibility to use a page-cache of a fair size, that doesn't inflate the memory footprint, which will dramatically fix the reduction and even give a performance gain. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - this patch no reduction Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - this patch 3.5% reduction Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - this patch 4% reduction Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2016 22 次提交
-
-
由 Wei Yongjun 提交于
Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
add the protection of the race condition between the reset process and hardware access happening on the related callbacks. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
struct mtk_eth has already contained struct regmap ethsys pointer to the address range of the internal circuit reset, so we reuse it to reset more internal blocks on ethernet hardware such as packet processing engine (PPE) and frame engine (FE) instead of rstc which deals with FE only. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
1) original driver only resets DMA used by descriptor rings which can't guarantee it can recover all various kinds of fatal errors, so the patch tries to reset the underlying hardware resource from scratch on Mediatek SoC required for ethernet running, including power, pin mux control, clock and internal circuits on the ethernet in order to restore into the initial state which the rebooted machine gives. 2) add state variable inside structure mtk_eth to help distinguish mtk_hw_init is called between the initialization during boot time or re-initialization during the reset process. 3) add ge_mode variable inside structure mtk_mac for restoring the interface mode of the current setup for the target MAC. 4) remove __init attribute from mtk_hw_init definition Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
introduce power domain control which the digital circuit of the ethernet belongs to inside the flow of hardware initialization and deinitialization which helps the entire ethernet hardware block could restart cleanly and completely as being back to the initial state when the whole machine reboot. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
This cleans up the error path inside mtk_hw_init call, causing it able to exit appropriately when something fails and also includes refactoring mtk_cleanup call to make the partial logic reusable on the error path. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
grouping things related to the deinitialization of what mtk_hw_init call does that help to be reused by the reset process and the error path handling. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
the existing mtk_hw_init includes hardware and software initialization inside so that it is slightly hard to reuse them for the process of the reset recovery, so some splitting is made here for keeping hardware initializing relevant thing and the else such as IRQ registration and MDIO initialization what are all about to the interface of core driver moved to the other proper place because they have no needs to register IRQ and re-initialize structure again during the reset process. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_rx_data_ack() to remove duplicate code to form CPL_RX_DATA_ACK hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_abort_rpl() to remove duplicate code to form CPL_ABORT_RPL hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_abort_req() to remove duplicate code to form CPL_ABORT_REQ hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_close_con_req() to remove duplicate code to form CPL_CLOSE_CON_REQ hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_mk_tid_release() to remove duplicate code to form CPL_TID_RELEASE hardware command. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_compute_wscale() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_best_mtu() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_is_neg_adv() in libcxgb_cm.h to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_find_route6() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_find_route() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Varun Prakash 提交于
Add cxgb_get_4tuple() in libcxgb_cm.c to remove it's duplicate definitions from cxgb4/cm.c and cxgbit/cxgbit_cm.c. Signed-off-by: NVarun Prakash <varun@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tobias Regnery 提交于
In commit 9ee7b683 we moved the enablement of msi interrupts earlier in alx_init_intr. If there is an error in alx_alloc_rings, __alx_open returns with an error but msi (or msi-x) interrupts stays enabled. Add a new error label to disable msi (or msi-x) interrupts. Fixes: 9ee7b683 ("alx: refactor msi enablement and disablement") Signed-off-by: NTobias Regnery <tobias.regnery@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hariprasad Shenai 提交于
The checksum provided by the device doesn't include the L3 headers, as IPv6 expects Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 9月, 2016 5 次提交
-
-
由 Ido Schimmel 提交于
Remove the deprecated {get,set}_settings callbacks and instead add {get,set}_link_ksettings along with support for newly available speeds. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
The device can support multiple port types, so don't return on first match. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
In case port isn't operational we shouldn't report the port type, but instead return PORT_OTHER. This is consistent with most other drivers that return PORT_OTHER when media type can't be determined. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
If autonegotiation was performed successfully, then we should report the link partner's advertised speeds instead of the operational speed of the port. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ido Schimmel 提交于
Up until now the device always reported autonegotiation to be off although it was on by default. Allow the user to disable / enable autonegotiation and report its status correctly. Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 9月, 2016 4 次提交
-
-
由 Philippe Reynes 提交于
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Philippe Reynes 提交于
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy_dev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: NPhilippe Reynes <tremyfr@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fixes the following sparse warning: drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c:172:1: warning: symbol 'stm32_dwmac_pm_ops' was not declared. Should it be static? Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Fix missing unlock before return from function macb_start_xmit() in the error handling case. Fixes: 007e4ba3 ("net: macb: initialize checksum when using checksum offloading") Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-