- 14 4月, 2011 2 次提交
-
-
由 Bryan Schumaker 提交于
NFS_MAX_SECFLAVORS should already take into account RPC_AUTH_UNIX and RPC_AUTH_NULL, so we don't need to set aside extra slots for them. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
There can be an infinite loop if gss_create_upcall() is called without the userspace program running. To prevent this, we return -EACCES if we notice that pipe_version hasn't changed (indicating that the pipe has not been opened). Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 08 4月, 2011 1 次提交
-
-
由 Bryan Schumaker 提交于
When attempting an initial mount, we should only attempt other authflavors if AUTH_UNIX receives a NFS4ERR_WRONGSEC error. This allows other errors to be passed back to userspace programs. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 25 3月, 2011 7 次提交
-
-
由 Weston Andros Adamson 提交于
changes LAYOUTGET and GETDEVICEINFO XDR parsing to: - not use vmap, which doesn't work on incoherent archs - use xdr_stream parsing for all xdr Signed-off-by: NWeston Andros Adamson <dros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
When sec=<something> is not presented as a mount option, we should attempt to determine what security flavor the server is using. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
A submount may use different security than the parent mount does. We should figure out what sec flavor the submount uses at mount time. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch adds the nfs4 operation secinfo as a valid nfs rpc operation. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
A later patch will need to perform a lookup using an alternate client with a different security flavor. This patch adds support for doing that on NFS v4. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Bryan Schumaker 提交于
This patch changes nfs4_call_sync() from a macro into a static inline function. As a macro, the call_sync() function will not do any type checking and depends on the sequence arguments always having the same name. As a function, we get to have type checking and can rename the arguments if we so choose. Signed-off-by: NBryan Schumaker <bjschuma@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 24 3月, 2011 3 次提交
-
-
由 Andy Adamson 提交于
The filelayout driver sends LAYOUTCOMMIT only when COMMIT goes to the data server (as opposed to the MDS) and the data server WRITE is not NFS_FILE_SYNC. Only whole file layout support means that there is only one IOMODE_RW layout segment. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NAlexandros Batsakis <batsakis@netapp.com> Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: NTao Guo <guotao@nrchpc.ac.cn> Signed-off-by: NZhang Jingwang <zhangjingwang@nrchpc.ac.cn> Tested-by: NBoaz Harrosh <bharrosh@panasas.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Any COMMIT compound directed to a data server needs to have the GETATTR calls suppressed. We here, make sure the field we are testing (data->lseg) is set and refcounted correctly. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Add a callback that the pnfs layout driver can use to do its own error handling of the data server's COMMIT response. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 3月, 2011 13 次提交
-
-
由 Trond Myklebust 提交于
The new behaviour is enabled using the new module parameter 'nfs4_disable_idmapping'. Note that if the server rejects an unmapped uid or gid, then the client will automatically switch back to using the idmapper. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
This will be required in order to switch uid/gid mapping back on if the admin has tried to disable it. Note that we also propagate NFS4ERR_BADNAME at the same time, in order to work around a Linux server bug. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Allows the pnfs filelayout driver to write to the data servers. Note that COMMIT to data servers will be implemented in a future patch. To avoid improper behavior, for the moment any WRITE to a data server that would also require a COMMIT to the data server is sent NFS_FILE_SYNC. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Any WRITE compound directed to a data server needs to have the GETATTR calls suppressed. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Add callback that pnfs layout driver can use to do its own handling of data server WRITE response. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Use our own async error handler. Mark the layout as failed and retry i/o through the MDS on specified errors. Update the mds_offset in nfs_readpage_retry so that a failed short-read retry to a DS gets correctly resent through the MDS. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Attempt a pNFS file layout read by setting up the nfs_read_data struct and calling nfs_initiate_read with the data server rpc client and the filelayout rpc call ops. Error handling is implemented in a subsequent patch. Signed-off-by: NAndy Adamson <andros@citi.umich.edu> Signed-off-by: NDean Hildebrand <dhildeb@us.ibm.com> Signed-off-by: NFred Isaman <iisaman@citi.umich.edu> Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NMingyang Guo <guomingyang@nrchpc.ac.cn> Signed-off-by: NOleg Drokin <green@linuxhacker.ru> Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Tested-by: NGuo Mingyang <guomingyang@nrchpc.ac.cn> Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Introduce a data server set_client and init session following the nfs4_set_client and nfs4_init_session convention. Once a new nfs_client is on the nfs_client_list, the nfs_client cl_cons_state serializes access to creating an nfs_client struct with matching properties. Use the new nfs_get_client() that initializes new clients. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Now nfs_get_client returns an nfs_client ready to be used no matter if it was found or created. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Huang Weiyi 提交于
Remove duplicated #include('s) in fs/nfs/nfs4proc.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
We want SEQUENCE status bits to be handled by the state manager in order to avoid threading issues. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
nfs4_schedule_state_recovery() should only be used when we need to force the state manager to check the lease. If we just want to start the state manager in order to handle a state recovery situation, we should be using nfs4_schedule_state_manager(). This patch fixes the abuses of nfs4_schedule_state_recovery() by replacing its use with a set of helper functions that do the right thing. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 11 3月, 2011 4 次提交
-
-
由 Andy Adamson 提交于
Signed-off-by: NAndy Adamson <andros@netapp.com> [Trond: fix whitespace errors] Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Ricardo Labiaga 提交于
Fix bug where we currently retry the EXCHANGEID call again, eventhough we already have a valid clientid. Instead, delay and retry the CREATE_SESSION call. Signed-off-by: NRicardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Jovi Zhang 提交于
this commit fix compilation warning as following: linux-2.6/fs/nfs/nfs4proc.c:3265: warning: comparison of distinct pointer types lacks a cast Signed-off-by: NJovi Zhang <bookjovi@gmail.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Although they run as rpciod background tasks, under normal operation (i.e. no SIGKILL), functions like nfs_sillyrename(), nfs4_proc_unlck() and nfs4_do_close() want to be fully synchronous. This means that when we exit, we want all references to the rpc_task to be gone, and we want any dentry references etc. held by that task to be released. For this reason these functions call __rpc_wait_for_completion_task(), followed by rpc_put_task() in the expectation that the latter will be releasing the last reference to the rpc_task, and thus ensuring that the callback_ops->rpc_release() has been called synchronously. This patch fixes a race which exists due to the fact that rpciod calls rpc_complete_task() (in order to wake up the callers of __rpc_wait_for_completion_task()) and then subsequently calls rpc_put_task() without ensuring that these two steps are done atomically. In order to avoid adding new spin locks, the patch uses the existing waitqueue spin lock to order the rpc_task reference count releases between the waiting process and rpciod. The common case where nobody is waiting for completion is optimised for by checking if the RPC_TASK_ASYNC flag is cleared and/or if the rpc_task reference count is 1: in those cases we drop trying to grab the spin lock, and immediately free up the rpc_task. Those few processes that need to put the rpc_task from inside an asynchronous context and that do not care about ordering are given a new helper: rpc_put_task_async(). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 05 3月, 2011 1 次提交
-
-
由 Neil Horman 提交于
The "bad_page()" page allocator sanity check was reported recently (call chain as follows): bad_page+0x69/0x91 free_hot_cold_page+0x81/0x144 skb_release_data+0x5f/0x98 __kfree_skb+0x11/0x1a tcp_ack+0x6a3/0x1868 tcp_rcv_established+0x7a6/0x8b9 tcp_v4_do_rcv+0x2a/0x2fa tcp_v4_rcv+0x9a2/0x9f6 do_timer+0x2df/0x52c ip_local_deliver+0x19d/0x263 ip_rcv+0x539/0x57c netif_receive_skb+0x470/0x49f :virtio_net:virtnet_poll+0x46b/0x5c5 net_rx_action+0xac/0x1b3 __do_softirq+0x89/0x133 call_softirq+0x1c/0x28 do_softirq+0x2c/0x7d do_IRQ+0xec/0xf5 default_idle+0x0/0x50 ret_from_intr+0x0/0xa default_idle+0x29/0x50 cpu_idle+0x95/0xb8 start_kernel+0x220/0x225 _sinittext+0x22f/0x236 It occurs because an skb with a fraglist was freed from the tcp retransmit queue when it was acked, but a page on that fraglist had PG_Slab set (indicating it was allocated from the Slab allocator (which means the free path above can't safely free it via put_page. We tracked this back to an nfsv4 setacl operation, in which the nfs code attempted to fill convert the passed in buffer to an array of pages in __nfs4_proc_set_acl, which gets used by the skb->frags list in xs_sendpages. __nfs4_proc_set_acl just converts each page in the buffer to a page struct via virt_to_page, but the vfs allocates the buffer via kmalloc, meaning the PG_slab bit is set. We can't create a buffer with kmalloc and free it later in the tcp ack path with put_page, so we need to either: 1) ensure that when we create the list of pages, no page struct has PG_Slab set or 2) not use a page list to send this data Given that these buffers can be multiple pages and arbitrarily sized, I think (1) is the right way to go. I've written the below patch to allocate a page from the buddy allocator directly and copy the data over to it. This ensures that we have a put_page free-able page for every entry that winds up on an skb frag list, so it can be safely freed when the frame is acked. We do a put page on each entry after the rpc_call_sync call so as to drop our own reference count to the page, leaving only the ref count taken by tcp_sendpages. This way the data will be properly freed when the ack comes in Successfully tested by myself to solve the above oops. Note, as this is the result of a setacl operation that exceeded a page of data, I think this amounts to a local DOS triggerable by an uprivlidged user, so I'm CCing security on this as well. Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Trond Myklebust <Trond.Myklebust@netapp.com> CC: security@kernel.org CC: Jeff Layton <jlayton@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 1月, 2011 1 次提交
-
-
由 Andy Adamson 提交于
As stated in section 2.4 of RFC 5661, subsequent instances of the client need to present the same co_ownerid. Concatinate the client's IP dot address, host name, and the rpc_auth pseudoflavor to form the co_ownerid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 12 1月, 2011 1 次提交
-
-
由 Andy Adamson 提交于
Indicate support for referrals. Do not set any PNFS roles. Check the flags returned by the server for validity. Do not use exchange flags from an old client ID instance when recovering a client ID. Update the EXCHID4_FLAG_XXX set to RFC 5661. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 07 1月, 2011 7 次提交
-
-
由 Trond Myklebust 提交于
In order to enable migration support, we will want to move some of the structures that are subject to migration into the struct nfs_server. In particular, if we are to move the state_owner and state_owner_id to being a per-filesystem structure, then we should label the resulting open/lock owners with a per-filesytem label to ensure global uniqueness. This patch does so by adding the super block s_dev to the open/lock owner name. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
A layout can request return-on-close. How this interacts with the forgetful model of never sending LAYOUTRETURNS is a bit ambiguous. We forget any layouts marked roc, and wait for them to be completely forgotten before continuing with the close. In addition, to compensate for races with any inflight LAYOUTGETs, and the fact that we do not get any layout stateid back from the server, we set the barrier to the worst case scenario of current_seqid + number of outstanding LAYOUTGETS. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
We shouldn't send a LAYOUTGET(openstateid) unless all outstanding RPCs using the previous stateid are completed. This requires choosing the stateid to encode earlier, so we can abort if one is not available (we want to use the open stateid, but a LAYOUTGET is already out using it), and adding a count of the number of outstanding rpc calls using layout state (which for now consist solely of LAYOUTGETs). Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
No functional changes, just some code minor code rearrangement and comments. Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Fred Isaman 提交于
Signed-off-by: NFred Isaman <iisaman@netapp.com> Signed-off-by: NBenny Halevy <bhalevy@panasas.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Currently session draining only drains the fore channel. The back channel processing must also be drained. Use the back channel highest_slot_used to indicate that a callback is being processed by the callback thread. Move the session complete to be per channel. When the session is draininig, wait for any current back channel processing to complete and stop all new back channel processing by returning NFS4ERR_DELAY to the back channel client. Drain the back channel, then the fore channel. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Andy Adamson 提交于
Use the small id to pointer translator service to provide a unique callback identifier per SETCLIENTID call used to identify the v4.0 callback service associated with the clientid. Signed-off-by: NAndy Adamson <andros@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-