Rework and simplify the locking with GuC subission. Drop
sched_state_no_lock and move all fields under the guc_state.sched_state
and protect all these fields with guc_state.lock . This requires
changing the locking hierarchy from guc_state.lock -> sched_engine.lock
to sched_engine.lock -> guc_state.lock.

v2:
 (Daniele)
  - Don't check fields outside of lock during sched disable, check less
    fields within lock as some of the outside are no longer needed
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-18-matthew.brost@intel.com

Move guc_blocked fence to struct guc_state as the lock which protects
the fence lives there.

s/ce->guc_blocked/ce->guc_state.blocked/g

v2:
 (Daniele)
  - s/blocked_fence/blocked/g
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-17-matthew.brost@intel.com

A subsequent patch will flip the locking hierarchy from
ce->guc_state.lock -> sched_engine->lock to sched_engine->lock ->
ce->guc_state.lock. As such we need to release the submit fence for a
request from an IRQ to break a lock inversion - i.e. the fence must be
release went holding ce->guc_state.lock and the releasing of the can
acquire sched_engine->lock.

v2:
 (Daniele)
  - Delete request from list before calling irq_work_queue
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-16-matthew.brost@intel.com

Reset LRC descriptor if a context register returns -ENODEV as this means
we are mid-reset.

Fixes: eb5e7da7 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-15-matthew.brost@intel.com

Before we did some clever tricks to not use the a lock when touching
guc_state.sched_state in certain cases. Don't do that, enforce the use
of the lock.

v2:
 (kernel test robo )
  - Add __maybe_unused to sched_state_is_init()

v3: rebase after the unused code path removal has been moved to an
earlier patch.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-14-matthew.brost@intel.com

A context can get destroyed after cancelling a request, if a context or
GT reset occurs, so take a reference to context when cancelling a
request.

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-13-matthew.brost@intel.com

While debugging an issue with full GT resets I went down a rabbit hole
thinking the scrubbing of lost G2H wasn't working correctly. This proved
to be incorrect as this was working just fine but this chase inspired me
to write a selftest to prove that this works. This simple selftest
injects errors dropping various G2H and then issues a full GT reset
proving that the scrubbing of these G2H doesn't blow up.

v2:
 (Daniel Vetter)
  - Use ifdef instead of macros for selftests
v3:
 (Checkpatch)
  - A space after 'switch' statement
v4:
 (Daniele)
  - A comment saying GT won't idle if G2H are lost
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-12-matthew.brost@intel.com

When unblocking a context, do not enable scheduling if the context is
banned, guc_id invalid, or not registered.

v2:
 (Daniele)
  - Add helper for unblock

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-10-matthew.brost@intel.com

Kick tasklet after queuing a request so it submitted in a timely manner.

Fixes: 3a4cdf19 ("drm/i915/guc: Implement GuC context operations for new inteface")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-9-matthew.brost@intel.com

If the context is reset as a result of the request cancellation the
context reset G2H is received after schedule disable done G2H which is
the wrong order. The schedule disable done G2H release the waiting
request cancellation code which resubmits the context. This races
with the context reset G2H which also wants to resubmit the context but
in this case it really should be a NOP as request cancellation code owns
the resubmit. Use some clever tricks of checking the context state to
seal this race until the GuC firmware is fixed.

v2:
 (Checkpatch)
  - Fix typos
v3:
 (Daniele)
  - State that is a bug in the GuC firmware

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-7-matthew.brost@intel.com

Don't drop ce->guc_active.lock when unwinding a context after reset.
At one point we had to drop this because of a lock inversion but that is
no longer the case. It is much safer to hold the lock so let's do that.

Fixes: eb5e7da7 ("drm/i915/guc: Reset implementation for new GuC interface")
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-5-matthew.brost@intel.com

When unwinding requests on a reset context, if other requests in the
context are in the priority list the requests could be resubmitted out
of seqno order. Traverse the list of active requests in reverse and
append to the head of the priority list to fix this.

Fixes: eb5e7da7 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-4-matthew.brost@intel.com

A small race that could result in incorrect accounting of the number
of outstanding G2H. Basically prior to this patch we did not increment
the number of outstanding G2H if we encoutered a GT reset while sending
a H2G. This was incorrect as the context state had already been updated
to anticipate a G2H response thus the counter should be incremented.

As part of this change we remove a legacy (now unused) path that was the
last caller requiring a G2H response that was not guaranteed to loop.
This allows us to simplify the accounting as we don't need to handle the
case where the send fails due to the channel being busy.

Also always use helper when decrementing this value.

v2 (Daniele): update GEM_BUG_ON check, pull in dead code removal from
later patch, remove loop param from context_deregister.

Fixes: f4eb1f3f ("drm/i915/guc: Ensure G2H response has space in buffer")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-3-matthew.brost@intel.com

Prior to this patch the blocked context counter was cleared on
init_sched_state (used during registering a context & resets) which is
incorrect. This state needs to be persistent or the counter can read the
incorrect value resulting in scheduling never getting enabled again.

Fixes: 62eaf0ae ("drm/i915/guc: Support request cancellation")
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210909164744.31249-2-matthew.brost@intel.com

The assumption when it was added was that GT would not be
holding any gt_pm references. However, uc_init is called
from gt_init_hw, which holds a forcewake ref. If SLPC
enable fails, we will still be holding this ref, which will
result in the BUG_ON.
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NVinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-7-vinay.belgaumkar@intel.com

Unblock GuC submission on Gen11+ platforms.

v2:
 (Martin Peres / John H)
  - Delete debug message when GuC is disabled by default on certain
    platforms
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-34-matthew.brost@intel.com

Implement a simple static mapping algorithm of the i915 priority levels
(int, -1k to 1k exposed to user) to the 4 GuC levels. Mapping is as
follows:

i915 level < 0          -> GuC low level     (3)
i915 level == 0         -> GuC normal level  (2)
i915 level < INT_MAX    -> GuC high level    (1)
i915 level == INT_MAX   -> GuC highest level (0)

We believe this mapping should cover the UMD use cases (3 distinct user
levels + 1 kernel level).

In addition to static mapping, a simple counter system is attached to
each context tracking the number of requests inflight on the context at
each level. This is needed as the GuC levels are per context while in
the i915 levels are per request.

v2:
 (Daniele)
  - Add BUILD_BUG_ON to enforce ordering of priority levels
  - Add missing lockdep to guc_prio_fini
  - Check for return before setting context registered flag
  - Map DISPLAY priority or higher to highest guc prio
  - Update comment for guc_prio
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-33-matthew.brost@intel.com

When GuC submission is enabled, the GuC controls engine resets. Rather
than explicitly triggering a reset, the driver must submit a hanging
context to GuC and wait for the reset to occur.
Signed-off-by: NRahul Kumar Singh <rahul.kumar.singh@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-28-matthew.brost@intel.com

This adds GuC backend support for i915_request_cancel(), which in turn
makes CONFIG_DRM_I915_REQUEST_TIMEOUT work.

This implementation makes use of fence while there are likely simplier
options. A fence was chosen because of another feature coming soon
which requires a user to block on a context until scheduling is
disabled. In that case we return the fence to the user and the user can
wait on that fence.

v2:
 (Daniele)
  - A comment about locking the blocked incr / decr
  - A comments about the use of the fence
  - Update commit message explaining why fence
  - Delete redundant check blocked count in unblock function
  - Ring buffer implementation
  - Comment about blocked in submission path
  - Shorter rpm path
v3:
 (Checkpatch)
  - Fix typos in commit message
 (Daniel)
  - Rework to simplier locking structure in guc_context_block / unblock
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-26-matthew.brost@intel.com

When using GuC submission, if a context gets banned disable scheduling
and mark all inflight requests as complete.

Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-25-matthew.brost@intel.com

Use the official driver default scheduling policies for configuring
the GuC scheduler rather than a bunch of hardcoded values.

v2:
 (Matthew Brost)
  - Move I915_ENGINE_WANT_FORCED_PREEMPTION to later patch
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-21-matthew.brost@intel.com

In the case of a full GPU reset (e.g. because GuC has died or because
GuC's hang detection has been disabled), the driver can't rely on GuC
reporting the guilty context. Instead, the driver needs to scan all
active contexts and find one that is currently executing, as per the
execlist mode behaviour. In GuC mode, this scan is different to
execlist mode as the active request list is handled very differently.

Similarly, the request state dump in debugfs needs to be handled
differently when in GuC submission mode.

Also refactured some of the request scanning code to avoid duplication
across the multiple code paths that are now replicating it.
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-20-matthew.brost@intel.com

We receive notification of an engine reset from GuC at its
completion. Meaning GuC has potentially cleared any HW state
we may have been interested in capturing. GuC resumes scheduling
on the engine post-reset, as the resets are meant to be transparent,
further muddling our error state.

There is ongoing work to define an API for a GuC debug state dump. The
suggestion for now is to manually disable FW initiated resets in cases
where debug state is needed.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-19-matthew.brost@intel.com

GuC will notify the driver, via G2H, if it fails to
reset an engine. We recover by resorting to a full GPU
reset.

v2:
 (John Harrison):
  - s/drm_dbg/drm_err
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NFernando Pacheco <fernando.pacheco@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-14-matthew.brost@intel.com

GuC will issue a reset on detecting an engine hang and will notify
the driver via a G2H message. The driver will service the notification
by resetting the guilty context to a simple state or banning it
completely.

v2:
 (John Harrison)
  - Move msg[0] lookup after length check
v3:
 (John Harrison)
  - s/drm_dbg/drm_err

Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-13-matthew.brost@intel.com

The new GuC interface introduces an MMIO H2G command,
INTEL_GUC_ACTION_RESET_CLIENT, which is used to implement suspend. This
MMIO tears down any active contexts generating a context reset G2H CTB
for each. Once that step completes the GuC tears down the CTB
channels. It is safe to suspend once this MMIO H2G command completes
and all G2H CTBs have been processed. In practice the i915 will likely
never receive a G2H as suspend should only be called after the GPU is
idle.

Resume is implemented in the same manner as before - simply reload the
GuC firmware and reinitialize everything (e.g. CTB channels, contexts,
etc..).

v2:
 (Michel / John H)
  - INTEL_GUC_ACTION_RESET_CLIENT 0x5B01 -> 0x5507

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NMichal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-12-matthew.brost@intel.com

If submission is disabled by the backend for any reason, reset the GPU
immediately in the heartbeat code as the backend can't be reenabled
until the GPU is reset.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-10-matthew.brost@intel.com

Reset implementation for new GuC interface. This is the legacy reset
implementation which is called when the i915 owns the engine hang check.
Future patches will offload the engine hang check to GuC but we will
continue to maintain this legacy path as a fallback and this code path
is also required if the GuC dies.

With the new GuC interface it is not possible to reset individual
engines - it is only possible to reset the GPU entirely. This patch
forces an entire chip reset if any engine hangs.

v2:
 (Michal)
  - Check for -EPIPE rather than -EIO (CT deadlock/corrupt check)
v3:
 (John H)
  - Split into a series of smaller patches
v4:
 (John H)
  - Fix typo
  - Add braces around if statements in reset code
v5:
 (Checkpatch)
  - Fix warnings

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <john.c.harrison@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-9-matthew.brost@intel.com

Move active request tracking to a backend vfunc rather than assuming all
backends want to do this in the manner. In the of case execlists /
ring submission the tracking is on the physical engine while with GuC
submission it is on the context.
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-8-matthew.brost@intel.com

With GuC virtual engines the physical engine which a request executes
and completes on isn't known to the i915. Therefore we can't attach a
request to a physical engines breadcrumbs. To work around this we create
a single breadcrumbs per engine class when using GuC submission and
direct all physical engine interrupts to this breadcrumbs.

v2:
 (John H)
  - Rework header file structure so intel_engine_mask_t can be in
    intel_engine_types.h
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
CC: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-6-matthew.brost@intel.com

The serial number tracking of engines happens at the backend of
request submission and was expecting to only be given physical
engines. However, in GuC submission mode, the decomposition of virtual
to physical engines does not happen in i915. Instead, requests are
submitted to their virtual engine mask all the way through to the
hardware (i.e. to GuC). This would mean that the heart beat code
thinks the physical engines are idle due to the serial number not
incrementing. Which in turns means hangcheck does not work for
GuC virtual engines.

This patch updates the tracking to decompose virtual engines into
their physical constituents and tracks the request against each. This
is not entirely accurate as the GuC will only be issuing the request
to one physical engine. However, it is the best that i915 can do given
that it has no knowledge of the GuC's scheduling decisions.

Downside of this is that all physical engines constituting a GuC
virtual engine will be periodically unparked (even during just a single
context executing) in order to be pinged with a heartbeat request.
However the power and performance cost of this is not expected to be
measurable (due low frequency of heartbeat pulses) and it is considered
an easier option than trying to make changes to GuC firmware.

v2:
 (Tvrtko)
  - Update commit message
  - Have default behavior if no vfunc present
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NMatthew Brost <matthew.brost@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-3-matthew.brost@intel.com

Implement GuC virtual engines. Rather simple implementation, basically
just allocate an engine, setup context enter / exit function to virtual
engine specific functions, set all other variables / functions to guc
versions, and set the engine mask to that of all the siblings.

v2: Update to work with proto-ctx
v3:
 (Daniele)
  - Drop include, add comment to intel_virtual_engine_has_heartbeat

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727002348.97202-2-matthew.brost@intel.com

Add intel_context tracing. These trace points are particular helpful
when debugging the GuC firmware and can be enabled via
CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS kernel config option.

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-19-matthew.brost@intel.com

Add trace point for GuC submit. Extended existing request trace points
to include submit fence value,, guc_id, and ring tail value.

v2: Fix white space alignment in i915_request_add trace point
v3: Delete dep_from , dep_to (Tvrtko)

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-18-matthew.brost@intel.com

Update GuC debugfs to support the new GuC structures.

v2:
 (John Harrison)
  - Remove intel_lrc_reg.h include from i915_debugfs.c
 (Michal)
  - Rename GuC debugfs functions
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-17-matthew.brost@intel.com

When running the GuC the GPU can't be considered idle if the GuC still
has contexts pinned. As such, a call has been added in
intel_gt_wait_for_idle to idle the UC and in turn the GuC by waiting for
the number of unpinned contexts to go to zero.

v2: rtimeout -> remaining_timeout
v3: Drop unnecessary includes, guc_submission_busy_loop ->
guc_submission_send_busy_loop, drop negatie timeout trick, move a
refactor of guc_context_unpin to earlier path (John H)
v4: Add stddef.h back into intel_gt_requests.h, sort circuit idle
function if not in GuC submission mode

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-16-matthew.brost@intel.com

Ensure G2H response has space in the buffer before sending H2G CTB as
the GuC can't handle any backpressure on the G2H interface.

v2:
 (Matthew)
  - s/INTEL_GUC_SEND/INTEL_GUC_CT_SEND
v3:
 (Matthew)
  - Add G2H credit accounting to blocking path, add g2h_release_space
    helper
 (John H)
  - CTB_G2H_BUFFER_SIZE / 4 == G2H_ROOM_BUFFER_SIZE
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-15-matthew.brost@intel.com

Extend the deregistration context fence to fence whne a GuC context has
scheduling disable pending.

v2:
 (John H)
  - Update comment why we check the pin count within spin lock

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <john.c.harrison@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-11-matthew.brost@intel.com

With GuC scheduling, it isn't safe to unpin a context while scheduling
is enabled for that context as the GuC may touch some of the pinned
state (e.g. LRC). To ensure scheduling isn't enabled when an unpin is
done, a call back is added to intel_context_unpin when pin count == 1
to disable scheduling for that context. When the response CTB is
received it is safe to do the final unpin.

Future patches may add a heuristic / delay to schedule the disable
call back to avoid thrashing on schedule enable / disable.

v2:
 (John H)
  - s/drm_dbg/drm_err
 (Daneiel)
  - Clean up sched state function

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-9-matthew.brost@intel.com

Sometimes during context pinning a context with the same guc_id is
registered with the GuC. In this a case deregister must be done before
the context can be registered. A fence is inserted on all requests while
the deregister is in flight. Once the G2H is received indicating the
deregistration is complete the context is registered and the fence is
released.

v2:
 (John H)
  - Fix commit message

Cc: John Harrison <john.c.harrison@intel.com>
Signed-off-by: NMatthew Brost <matthew.brost@intel.com>
Reviewed-by: NJohn Harrison <john.c.harrison@intel.com>
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210721215101.139794-8-matthew.brost@intel.com