The adminq init is run after the EMPR that is triggered by the
NVM update.  The final write command will cause the reset and
will want to wait for the ARQ event that signals the end of the
update, but the reset precludes the event being sent.  The state
is probably already at INIT, but we set it so here anyway, and
clear the release_on_done flag as well.

Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NMichal Kosiarz <michal.kosiarz@intel.com>
Acked-by: NKamil Krawczyk <kamil.krawczyk@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Just to be sure, add a range check to avoid any possible
array index-out-of-bound issues.

CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Change-ID: I9323bee6732c2a47599816e1d6c6b3a1f8dcbf54
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NMichal Kosiarz <michal.kosiarz@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Rework the debug messages in the NVM update state machine so that we can
turn them on and off dynamically rather than forcing a recompile/reload.

These can now be turned on with something like:
	ethtool -s eth1 msglvl 0xf000008f
and off with:
	ethtool -s eth1 msglvl 0xf000000f

The high 0xf0000000 gets the driver's attention that we want to change the
internal debug flags, and the 0x80 bit is the NVM debug.

Change-ID: I5efb9039400304b29a0fd6ddea3f47bb362e6661
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NGreg Rose <gregory.v.rose@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The NVM update operations take time finish asynchronously, and follow-on
update requests need to wait for the current one to finish.  Early
firmware didn't handle this well, so the code had to track the busy state.
The released firmware handles the busy state correctly, returning
I40E_AQ_RC_EBUSY if an update is still in progress, so the code no longer
needs to track this.

Change-ID: I6e6b4adc26d6dcc5fd7adfee5763423858a7d921
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Acked-by: NGreg Rose <gregory.v.rose@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add more detail to the NVM update error messages so folks
have a better chance at diagnosing issues without having to
resort to heroic measures to reproduce an issue.

Change-ID: I270d1a9c903baceaef0bebcc55d29108ac08b0bd
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Once in a great while the NVMUpdate tools and the driver get out
of phase with each other.  This gives us a way to reset things
without having to unload the driver.

Change-ID: I353f688236249a666a90ba3e7233e0ed8c1a04e9
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NJim Young <jamesx.m.young@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

In a configuration with CONFIG_BRIDGE set to 'm' and CONFIG_ROCKER
set to 'y', undefined references occur at link time:

> drivers/built-in.o: In function `rocker_port_fdb_learn_work':
> /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3014: undefined
> reference to `br_fdb_external_learn_del'
> /home/jim/linux/drivers/net/ethernet/rocker/rocker.c:3016: undefined
> reference to `br_fdb_external_learn_add'

This patch fixes these by declaring CONFIG_ROCKER as being dependent
on CONFIG_BRIDGE.
Reported-by: NJim Davis <jim.epost@gmail.com>
Signed-off-by: NAndreas Ruprecht <rupran@einserver.de>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce helper function do_sock_sendmsg() to simplify sock_sendmsg{_nosec},
and replace reduplicate code.
Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 2b4636a5 ("tcp_cubic: make the delay threshold of HyStart
less sensitive"), HYSTART_DELAY_MIN was changed to 4 ms.

The remaining problem is that using delay_min + (delay_min/16) as the
threshold is too sensitive.

6.25 % of variation is too small for rtt above 60 ms, which are not
uncommon.

Lets use 12.5 % instead (delay_min + (delay_min/8))

Tested:
 80 ms RTT between peers, FQ/pacing packet scheduler on sender.
 10 bulk transfers of 10 seconds :

nstat >/dev/null
for i in `seq 1 10`
 do
   netperf -H remote -- -k THROUGHPUT | grep THROUGHPUT
 done
nstat | grep Hystart

With the 6.25 % threshold :

THROUGHPUT=20.66
THROUGHPUT=249.38
THROUGHPUT=254.10
THROUGHPUT=14.94
THROUGHPUT=251.92
THROUGHPUT=237.73
THROUGHPUT=19.18
THROUGHPUT=252.89
THROUGHPUT=21.32
THROUGHPUT=15.58
TcpExtTCPHystartTrainDetect     2                  0.0
TcpExtTCPHystartTrainCwnd       4756               0.0
TcpExtTCPHystartDelayDetect     5                  0.0
TcpExtTCPHystartDelayCwnd       180                0.0

With the 12.5 % threshold
THROUGHPUT=251.09
THROUGHPUT=247.46
THROUGHPUT=250.92
THROUGHPUT=248.91
THROUGHPUT=250.88
THROUGHPUT=249.84
THROUGHPUT=250.51
THROUGHPUT=254.15
THROUGHPUT=250.62
THROUGHPUT=250.89
TcpExtTCPHystartTrainDetect     1                  0.0
TcpExtTCPHystartTrainCwnd       3175               0.0
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Tested-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When deploying FQ pacing, one thing we noticed is that CUBIC Hystart
triggers too soon.

Having SNMP counters to have an idea of how often the various Hystart
methods trigger is useful prior to any modifications.

This patch adds SNMP counters tracking, how many time "ack train" or
"Delay" based Hystart triggers, and cumulative sum of cwnd at the time
Hystart decided to end SS (Slow Start)

myhost:~# nstat -a | grep Hystart
TcpExtTCPHystartTrainDetect     9                  0.0
TcpExtTCPHystartTrainCwnd       20650              0.0
TcpExtTCPHystartDelayDetect     10                 0.0
TcpExtTCPHystartDelayCwnd       360                0.0

->
 Train detection was triggered 9 times, and average cwnd was
 20650/9=2294,
 Delay detection was triggered 10 times and average cwnd was 36
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NNeal Cardwell <ncardwell@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Let the compiler decide instead.

No change in object size x86-64 -O2 no profiling
Signed-off-by: NJoe Perches <joe@perches.com>
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the (1 << reg) & mask trick to reduce code size.

x86-64 size difference -O2 without profiling for various
gcc versions:

$ size arch/x86/net/bpf_jit_comp.o*
   text    data     bss     dec     hex filename
   9266       4       0    9270    2436 arch/x86/net/bpf_jit_comp.o.4.4.new
  10042       4       0   10046    273e arch/x86/net/bpf_jit_comp.o.4.4.old
   9109       4       0    9113    2399 arch/x86/net/bpf_jit_comp.o.4.6.new
   9717       4       0    9721    25f9 arch/x86/net/bpf_jit_comp.o.4.6.old
   8789       4       0    8793    2259 arch/x86/net/bpf_jit_comp.o.4.7.new
  10245       4       0   10249    2809 arch/x86/net/bpf_jit_comp.o.4.7.old
   9671       4       0    9675    25cb arch/x86/net/bpf_jit_comp.o.4.9.new
  10679       4       0   10683    29bb arch/x86/net/bpf_jit_comp.o.4.9.old
Signed-off-by: NJoe Perches <joe@perches.com>
Tested-by: NAlexei Starovoitov <ast@plumgrid.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It is never called and implementations are void. So just remove it.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Our FW can support several fastpath HSI [for backward compatibility] but up
until now VFs were always configured to use latest fastpath HSI [although VF
driver might be older and use an older fastpath HSI].

For linux drivers, the differences are insignificant since driver never
utilized features that were overridden by the HSI change. But for VMs running
other operating systems this might be a problem.
In addition, eventually FW might change fastpath HSI in such a manner that
backward compatibility WILL break unless configured with proper version.

This patch fixes the issue for other operating system VMs, as well as lays
the ground work for forward compatibility in regard to the fastpath HSI.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NAriel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The comment says that the built-in strncmp didn't work. That is not
surprising, as apparently "str" semantics are not really what is
wanted (hint: de4x5_strncmp only stops when two different bytes are
encountered or the end is reached; not if either byte happens to be
0). de4x5_strncmp is actually a memcmp (except for the signature and
that bytes are not necessarily treated as unsigned char); since only
the boolean value of the result is used we can just replace
de4x5_strncmp with memcmp.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: NGrant Grundler <grundler@parisc-linux.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

CPSW is present in AM33xx, AM43xx, DRA7xx.
Updating the Kconfig to depend on ARCH_OMAP2PLUS instead of listing
all SoC's.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Acked-by: NMugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 908344cd ("tipc: fix bug in multicast congestion
handling") introduced two bugs with the bclink wakeup
function. This commit fixes the missing spinlock init for the
waiting_sks list. We also eliminate the race condition
between the waiting_sks length check/dequeue operations in
tipc_bclink_wakeup_users by simply removing the redundant
length check.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Acked-by: NTero Aho <Tero.Aho@coriant.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Redefine REALTEK_USB_DEVICE for the desired USB interface for probe().
There are three USB interfaces for the device. USB_CLASS_COMM and
USB_CLASS_CDC_DATA are for ECM mode (config #2). USB_CLASS_VENDOR_SPEC
is for the vendor mode (config #1). However, we are not interesting
in USB_CLASS_CDC_DATA for probe(), so redefine REALTEK_USB_DEVICE
to ignore the USB interface class of USB_CLASS_CDC_DATA.
Signed-off-by: NHayes Wang <hayeswang@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit ce1a4ea3 ("net: avoid one atomic operation in skb_clone()")
took the wrong way to save one atomic operation.

It is actually possible to avoid two atomic operations, if we
do not change skb->fclone values, and only rely on clone_ref
content to signal if the clone is available or not.

skb_clone() can simply use the fast clone if clone_ref is 1.

kfree_skbmem() can avoid the atomic_dec_and_test() if clone_ref is 1.

Note that because we usually free the clone before the original skb,
this particular attempt is only done for the original skb to have better
branch prediction.

SKB_FCLONE_FREE is removed.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Vijay Subramanian <subramanian.vijay@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The commit 56bfa7ee ("unregister_netdevice : move RTM_DELLINK to
until after ndo_uninit") tried to do this ealier but while doing so
it created a problem. Unfortunately the delayed rtmsg_ifinfo() also
delayed call to fill_info(). So this translated into asking driver
to remove private state and then query it's private state. This
could have catastropic consequences.

This change breaks the rtmsg_ifinfo() into two parts - one takes the
precise snapshot of the device by called fill_info() before calling
the ndo_uninit() and the second part sends the notification using
collected snapshot.

It was brought to notice when last link is deleted from an ipvlan device
when it has free-ed the port and the subsequent .fill_info() call is
trying to get the info from the port.

kernel: [  255.139429] ------------[ cut here ]------------
kernel: [  255.139439] WARNING: CPU: 12 PID: 11173 at net/core/rtnetlink.c:2238 rtmsg_ifinfo+0x100/0x110()
kernel: [  255.139493] Modules linked in: ipvlan bonding w1_therm ds2482 wire cdc_acm ehci_pci ehci_hcd i2c_dev i2c_i801 i2c_core msr cpuid bnx2x ptp pps_core mdio libcrc32c
kernel: [  255.139513] CPU: 12 PID: 11173 Comm: ip Not tainted 3.18.0-smp-DEV #167
kernel: [  255.139514] Hardware name: Intel RML,PCH/Ibis_QC_18, BIOS 1.0.10 05/15/2012
kernel: [  255.139515]  0000000000000009 ffff880851b6b828 ffffffff815d87f4 00000000000000e0
kernel: [  255.139516]  0000000000000000 ffff880851b6b868 ffffffff8109c29c 0000000000000000
kernel: [  255.139518]  00000000ffffffa6 00000000000000d0 ffffffff81aaf580 0000000000000011
kernel: [  255.139520] Call Trace:
kernel: [  255.139527]  [<ffffffff815d87f4>] dump_stack+0x46/0x58
kernel: [  255.139531]  [<ffffffff8109c29c>] warn_slowpath_common+0x8c/0xc0
kernel: [  255.139540]  [<ffffffff8109c2ea>] warn_slowpath_null+0x1a/0x20
kernel: [  255.139544]  [<ffffffff8150d570>] rtmsg_ifinfo+0x100/0x110
kernel: [  255.139547]  [<ffffffff814f78b5>] rollback_registered_many+0x1d5/0x2d0
kernel: [  255.139549]  [<ffffffff814f79cf>] unregister_netdevice_many+0x1f/0xb0
kernel: [  255.139551]  [<ffffffff8150acab>] rtnl_dellink+0xbb/0x110
kernel: [  255.139553]  [<ffffffff8150da90>] rtnetlink_rcv_msg+0xa0/0x240
kernel: [  255.139557]  [<ffffffff81329283>] ? rhashtable_lookup_compare+0x43/0x80
kernel: [  255.139558]  [<ffffffff8150d9f0>] ? __rtnl_unlock+0x20/0x20
kernel: [  255.139562]  [<ffffffff8152cb11>] netlink_rcv_skb+0xb1/0xc0
kernel: [  255.139563]  [<ffffffff8150a495>] rtnetlink_rcv+0x25/0x40
kernel: [  255.139565]  [<ffffffff8152c398>] netlink_unicast+0x178/0x230
kernel: [  255.139567]  [<ffffffff8152c75f>] netlink_sendmsg+0x30f/0x420
kernel: [  255.139571]  [<ffffffff814e0b0c>] sock_sendmsg+0x9c/0xd0
kernel: [  255.139575]  [<ffffffff811d1d7f>] ? rw_copy_check_uvector+0x6f/0x130
kernel: [  255.139577]  [<ffffffff814e11c9>] ? copy_msghdr_from_user+0x139/0x1b0
kernel: [  255.139578]  [<ffffffff814e1774>] ___sys_sendmsg+0x304/0x310
kernel: [  255.139581]  [<ffffffff81198723>] ? handle_mm_fault+0xca3/0xde0
kernel: [  255.139585]  [<ffffffff811ebc4c>] ? destroy_inode+0x3c/0x70
kernel: [  255.139589]  [<ffffffff8108e6ec>] ? __do_page_fault+0x20c/0x500
kernel: [  255.139597]  [<ffffffff811e8336>] ? dput+0xb6/0x190
kernel: [  255.139606]  [<ffffffff811f05f6>] ? mntput+0x26/0x40
kernel: [  255.139611]  [<ffffffff811d2b94>] ? __fput+0x174/0x1e0
kernel: [  255.139613]  [<ffffffff814e2129>] __sys_sendmsg+0x49/0x90
kernel: [  255.139615]  [<ffffffff814e2182>] SyS_sendmsg+0x12/0x20
kernel: [  255.139617]  [<ffffffff815df092>] system_call_fastpath+0x12/0x17
kernel: [  255.139619] ---[ end trace 5e6703e87d984f6b ]---
Signed-off-by: NMahesh Bandewar <maheshb@google.com>
Reported-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This file is used by iproute2 and should be exported.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hariprasad Shenai says:

====================
cxgb4/cxgb4vf: T5 BAR2 and ethtool related fixes

This series adds new interface to calculate BAR2 SGE queue register address for
cxgb4 and cxgb4vf driver and some more sge related fixes for T5. Also adds a
patch which updates the FW version displayed by ethtool after firmware flash.

The patches series is created against 'net-next' tree.
And includes patches on cxgb4 and cxgb4vf driver.

We have included all the maintainers of respective drivers. Kindly review the
change and let us know in case of any review comments.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After successfully loading new firmware, reload the new firmware's version
number information so "ethtool -i", etc. will report the right value
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use BAR2 Going To Sleep (GTS) for T5 and later. Use new BAR2 User Doorbells for
T5 for both cxgb4 and cxgb4vf driver.

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new Common Code facilities for calculating T5 BAR2 Offsets for SGE Queue
Registers. This new code can handle situations where

    Queues Per Page * SGE BAR2 Queue Register Area Size > Page Size

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add sge_vf_eq_qpp and sge_vf_iq_qpp to (struct sge_params), initialize
sge_queues_per_page and sge_vf_qpp in t4vf_get_sge_params(), add new
t4vf_prep_adapter() which initializes basic adapter parameters.

Grab both SGE_EGRESS_QUEUES_PER_PAGE_VF and SGE_INGRESS_QUEUES_PER_PAGE_VF
for VF Drivers since we need both to calculate the User Doorbell area
offsets for Egress and Ingress Queues.

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Part of the old remote management feature is a piece of code
that checked permissions on the local system to see if a certain
operation was permitted, and if so pass the command to a remote
node. This serves no purpose after the removal of remote management
with commit 5902385a ("tipc: obsolete the remote management
feature") so we remove it.
Signed-off-by: NErik Hugne <erik.hugne@ericsson.com>
Reviewed-by: NJon Maloy <jon.maloy@ericsson.com>
Reviewed-by: NYing Xue <ying.xue@windriver.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This kills the sparse warnings.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NScott Feldman <sfeldma@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

xchg is atomic, so there is no necessary to use spin_lock/spin_unlock
to protect it. At last, remove the redundant
opt = xchg(&inet6_sk(sk)->opt, opt); statement.
Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When requesting an irq, the name passed in must be (part of) allocated
memory. The irq name was a local variable and resulted in random
characters when listing /proc/interrupts. Add a character field to the
xgbe_channel structure to hold the irq name and use that.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes an extra rcu_read_unlock() on an allocation failure
in vnet_skb_shape(). The needed rcu_read_unlock() is already done in
the out_dropped label.
Reported-by: NRashmi Narasimhan <rashmi.narasimhan@oracle.com>
Signed-off-by: NDavid L Stevens <david.stevens@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: bcmgenet: support for new GPHY revision scheme

These two patches update the GENET GPHY revision logic to account for some
of our newer designs starting with GPHY rev G0.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GPHY revision G0 has its version rolled over to 0x10, introduce an
explicit check for that revision and invoke the proper workaround
function for it.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Starting with GPHY revision G0, the GENET register layout has changed to
use the same numbering scheme as the Starfighter 2 switch. This means
that GPHY major revision is in bits 15:12, minor in bits 11:8 and patch
level is in bits 7:4.

Introduce a small heuristic which checks for the old scheme first, tests
for the new scheme and finally attempts to catch reserved values and
aborts.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2014-12-03

1) Fix a set but not used warning. From Fabian Frederick.

2) Currently we make sequence number values available to userspace
   only if we use ESN. Make the sequence number values also available
   for non ESN states. From Zhi Ding.

3) Remove socket policy hashing. We don't need it because socket
   policies are always looked up via a linked list. From Herbert Xu.

4) After removing socket policy hashing, we can use __xfrm_policy_link
   in xfrm_policy_insert. From Herbert Xu.

5) Add a lookup method for vti6 tunnels with wildcard endpoints.
   I forgot this when I initially implemented vti6.

Please pull or let me know if there are problems.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David L Stevens says:

====================
sunvnet: add SG, HW_CSUM, GSO, and TSO support

This patch set adds everything needed for TSO support in sunvnet. On my
test hardware, this increases the single-stream TCP throughput for the
default 1500-byte MTU Linux-Linux from ~2Gbps to 10Gbps and Linux-Solaris
from ~2Gbps to 6Gbps.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds TSO support for the sunvnet driver.
Signed-off-by: NDavid L Stevens <david.stevens@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds GSO support to the sunvnet driver.
Signed-off-by: NDavid L Stevens <david.stevens@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for sender-side checksum offloading.
Signed-off-by: NDavid L Stevens <david.stevens@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>