- 01 11月, 2008 10 次提交
-
-
由 Johannes Berg 提交于
Never actually used. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch cleans up a number of things: * the unusable definition of the HT capabilities/HT information information elements * variable names that are hard to understand * mac80211: move ieee80211_handle_ht to ht.c and remove the unused enable_ht parameter * mac80211: fix bug with MCS rate 32 in ieee80211_handle_ht * mac80211: fix bug with casting the result of ieee80211_bss_get_ie to an information element _contents_ rather than the whole element, add size checking (another out-of-bounds access bug fixed!) * mac80211: remove some unused return values in favour of BUG_ON checking * a few minor other things Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Rami Rosen 提交于
This patch removes unused definition of struct sta_attribute in net/mac80211/ieee80211_i.h. Signed-off-by: NRami Rosen <ramirose@gmail.com> Acked-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This patch makes mac80211 handle short slot requests from the AP properly. Also warn about uses of IEEE80211_CONF_SHORT_SLOT_TIME and optimise out the code since it cannot ever be hit anyway. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The antenna gain isn't exactly configurable, despite the belief of some unnamed individual who thinks that the EEPROM might influence it. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Warn when ieee80211_hw_config returns an error, it shouldn't happen; remove a number of printks that would happen in such a case and one printk that is user-triggerable. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This isn't used by anyone, if we ever need it we can add it back, until then it's useless. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
Nothing very interesting, some checkpatch inspired stuff, some other things. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
These parameters shouldn't be configurable via debugfs, if they need to be configurable nl80211 support has to be added, if not then they don't need to be writable here either. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Javier Cardona <javier@cozybit.com> Cc: Luis Carlos Cobo <luisca@cozybit.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This code uses static variables and thus cannot be kept. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 31 10月, 2008 14 次提交
-
-
由 Harvey Harrison 提交于
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Using NIPQUAD() with NIPQUAD_FMT, %d.%d.%d.%d or %u.%u.%u.%u can be replaced with %pI4 Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
This patch adds qdisc_peek_dequeued() wrapper to emulate peek method with qdisc->dequeue() and storing "peeked" skb in qdisc->gso_skb until dequeuing. This is mainly for compatibility reasons not to break some strange configs because peeking is expected for non-work-conserving parent qdiscs to query work-conserving child qdiscs. This implementation requires using qdisc_dequeue_peeked() wrapper instead of directly calling qdisc->dequeue() for all qdiscs ever querried with qdisc->ops->peek() or qdisc_peek_dequeued(). Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Use qdisc->ops->peek() instead of ->dequeue() & ->requeue() pair. After this patch the only remaining user of qdisc->ops->requeue() is netem_enqueue(). Based on ideas of Herbert Xu, Patrick McHardy and David S. Miller. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Add qdisc->ops->peek() implementation for work-conserving qdiscs. With feedback from Patrick McHardy. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
With feedback from Patrick McHardy. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
From: Patrick McHardy <kaber@trash.net> Just as a demonstration how easy adding a peek operation to the work-conserving qdiscs actually is. It doesn't need to keep or change any internal state in many cases thanks to the guarantee that the packet will either be dequeued or, if another packet arrives, the upper qdisc will immediately ->peek again to reevaluate the state. (This is only slightly modified Patrick's patch.) Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 fernando@oss.ntt.co 提交于
I noticed that, under certain conditions, ESRCH can be leaked from the xfrm layer to user space through sys_connect. In particular, this seems to happen reliably when the kernel fails to resolve a template either because the AF_KEY receive buffer being used by racoon is full or because the SA entry we are trying to use is in XFRM_STATE_EXPIRED state. However, since this could be a transient issue it could be argued that EAGAIN would be more appropriate. Besides this error code is not even documented in the man page for sys_connect (as of man-pages 3.07). Signed-off-by: NFernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
register_pernet_gen_device() can't be used is nf_conntrack_pptp module is also used (compiled in or loaded). Right now, proto_gre_net_exit() is called before nf_conntrack_pptp_net_exit(). The former shutdowns and frees GRE piece of netns, however the latter absolutely needs it to flush keymap. Oops is inevitable. Switch to shiny new register_pernet_gen_subsys() to get correct ordering in netns ops list. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
netns ops which are registered with register_pernet_gen_device() are shutdown strictly before those which are registered with register_pernet_subsys(). Sometimes this leads to opposite (read: buggy) shutdown ordering between two modules. Add register_pernet_gen_subsys()/unregister_pernet_gen_subsys() for modules which aren't elite enough for entry in struct net, and which can't use register_pernet_gen_device(). PPTP conntracking module is such one. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Spotted by Alexander Beregalov Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2008 7 次提交
-
-
由 Manish Katiyar 提交于
Enable netlabel auditing functions only when CONFIG_AUDIT is set Signed-off-by: NManish Katiyar <mkatiyar@gmail.com> Signed-off-by: NPaul Moore <paul.moore@hp.com>
-
由 Paul Moore 提交于
Fix the compiler warnings below, thanks to Andrew Morton for finding them. net/netlabel/netlabel_mgmt.c: In function `netlbl_mgmt_listentry': net/netlabel/netlabel_mgmt.c:268: warning: 'ret_val' might be used uninitialized in this function Signed-off-by: NPaul Moore <paul.moore@hp.com>
-
由 roel kluin 提交于
unsigned buf_len cannot be negative Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NPaul Moore <paul.moore@hp.com>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
gcc warns when using the # modifier with the %p format specifier, so we can't use this to omit the colons when needed, introduces %pi6 instead. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Corey Minyard found a race added in commit 271b72c7 (udp: RCU handling for Unicast packets.) "If the socket is moved from one list to another list in-between the time the hash is calculated and the next field is accessed, and the socket has moved to the end of the new list, the traversal will not complete properly on the list it should have, since the socket will be on the end of the new list and there's not a way to tell it's on a new list and restart the list traversal. I think that this can be solved by pre-fetching the "next" field (with proper barriers) before checking the hash." This patch corrects this problem, introducing a new sk_for_each_rcu_safenext() macro. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2008 9 次提交
-
-
由 Eric Dumazet 提交于
This patch mimics commit 57413ebc (tcp: calculate tcp_mem based on low memory instead of all memory) The udp_mem array which contains limits on the total amount of memory used by UDP sockets is calculated based on nr_all_pages. On a 32 bits x86 system, we should base this on the number of lowmem pages. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Goals are : 1) Optimizing handling of incoming Unicast UDP frames, so that no memory writes should happen in the fast path. Note: Multicasts and broadcasts still will need to take a lock, because doing a full lockless lookup in this case is difficult. 2) No expensive operations in the socket bind/unhash phases : - No expensive synchronize_rcu() calls. - No added rcu_head in socket structure, increasing memory needs, but more important, forcing us to use call_rcu() calls, that have the bad property of making sockets structure cold. (rcu grace period between socket freeing and its potential reuse make this socket being cold in CPU cache). David did a previous patch using call_rcu() and noticed a 20% impact on TCP connection rates. Quoting Cristopher Lameter : "Right. That results in cacheline cooldown. You'd want to recycle the object as they are cache hot on a per cpu basis. That is screwed up by the delayed regular rcu processing. We have seen multiple regressions due to cacheline cooldown. The only choice in cacheline hot sensitive areas is to deal with the complexity that comes with SLAB_DESTROY_BY_RCU or give up on RCU." - Because udp sockets are allocated from dedicated kmem_cache, use of SLAB_DESTROY_BY_RCU can help here. Theory of operation : --------------------- As the lookup is lockfree (using rcu_read_lock()/rcu_read_unlock()), special attention must be taken by readers and writers. Use of SLAB_DESTROY_BY_RCU is tricky too, because a socket can be freed, reused, inserted in a different chain or in worst case in the same chain while readers could do lookups in the same time. In order to avoid loops, a reader must check each socket found in a chain really belongs to the chain the reader was traversing. If it finds a mismatch, lookup must start again at the begining. This *restart* loop is the reason we had to use rdlock for the multicast case, because we dont want to send same message several times to the same socket. We use RCU only for fast path. Thus, /proc/net/udp still takes spinlocks. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
UDP sockets are hashed in a 128 slots hash table. This hash table is protected by *one* rwlock. This rwlock is readlocked each time an incoming UDP message is handled. This rwlock is writelocked each time a socket must be inserted in hash table (bind time), or deleted from this table (close time) This is not scalable on SMP machines : 1) Even in read mode, lock() and unlock() are atomic operations and must dirty a contended cache line, shared by all cpus. 2) A writer might be starved if many readers are 'in flight'. This can happen on a machine with some NIC receiving many UDP messages. User process can be delayed a long time at socket creation/dismantle time. This patch prepares RCU migration, by introducing 'struct udp_table and struct udp_hslot', and using one spinlock per chain, to reduce contention on central rwlock. Introducing one spinlock per chain reduces latencies, for port randomization on heavily loaded UDP servers. This also speedup bindings to specific ports. udp_lib_unhash() was uninlined, becoming to big. Some cleanups were done to ease review of following patch (RCUification of UDP Unicast lookups) Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Open code NIP6_FMT in the one call inside sscanf and one user of NIP6() that could use %p6 in the netfilter code. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This enables more ethtool information. The speed and settings of the underlying device are propagated up. This makes services like SNMP that use ethtool to get speed setting, work when managing a vlan, without adding silly heurtistics into SNMP daemon. For the driver info, just use existing driver strings. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
The define in kernel.h can be done away with at a later time. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-