Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 18 8月, 2019 4 次提交
    • I
      devlink: Add packet trap infrastructure · 0f420b6c
      由 Ido Schimmel 提交于 
      Add the basic packet trap infrastructure that allows device drivers to
register their supported packet traps and trap groups with devlink.

Each driver is expected to provide basic information about each
supported trap, such as name and ID, but also the supported metadata
types that will accompany each packet trapped via the trap. The
currently supported metadata type is just the input port, but more will
be added in the future. For example, output port and traffic class.

Trap groups allow users to set the action of all member traps. In
addition, users can retrieve per-group statistics in case per-trap
statistics are too narrow. In the future, the trap group object can be
extended with more attributes, such as policer settings which will limit
the amount of traffic generated by member traps towards the CPU.

Beside registering their packet traps with devlink, drivers are also
expected to report trapped packets to devlink along with relevant
metadata. devlink will maintain packets and bytes statistics for each
packet trap and will potentially report the trapped packet with its
metadata to user space via drop monitor netlink channel.

The interface towards the drivers is simple and allows devlink to set
the action of the trap. Currently, only two actions are supported:
'trap' and 'drop'. When set to 'trap', the device is expected to provide
the sole copy of the packet to the driver which will pass it to devlink.
When set to 'drop', the device is expected to drop the packet and not
send a copy to the driver. In the future, more actions can be added,
such as 'mirror'.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0f420b6c
    • I
      drop_monitor: Allow user to start monitoring hardware drops · 8e94c3bc
      由 Ido Schimmel 提交于 
      Drop monitor has start and stop commands, but so far these were only
used to start and stop monitoring of software drops.

Now that drop monitor can also monitor hardware drops, we should allow
the user to control these as well.

Do that by adding SW and HW flags to these commands. If no flag is
specified, then only start / stop monitoring software drops. This is
done in order to maintain backward-compatibility with existing user
space applications.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8e94c3bc
    • I
      drop_monitor: Add support for summary alert mode for hardware drops · d40e1deb
      由 Ido Schimmel 提交于 
      In summary alert mode a notification is sent with a list of recent drop
reasons and a count of how many packets were dropped due to this reason.

To avoid expensive operations in the context in which packets are
dropped, each CPU holds an array whose number of entries is the maximum
number of drop reasons that can be encoded in the netlink notification.
Each entry stores the drop reason and a count. When a packet is dropped
the array is traversed and a new entry is created or the count of an
existing entry is incremented.

Later, in process context, the array is replaced with a newly allocated
copy and the old array is encoded in a netlink notification. To avoid
breaking user space, the notification includes the ancillary header,
which is 'struct net_dm_alert_msg' with number of entries set to '0'.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d40e1deb
    • I
      drop_monitor: Add support for packet alert mode for hardware drops · 5e58109b
      由 Ido Schimmel 提交于 
      In a similar fashion to software drops, extend drop monitor to send
netlink events when packets are dropped by the underlying hardware.

The main difference is that instead of encoding the program counter (PC)
from which kfree_skb() was called in the netlink message, we encode the
hardware trap name. The two are mostly equivalent since they should both
help the user understand why the packet was dropped.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5e58109b
  3. 15 8月, 2019 1 次提交
  5. 13 8月, 2019 4 次提交
  7. 12 8月, 2019 6 次提交
    • I
      drop_monitor: Expose tail drop counter · e9feb580
      由 Ido Schimmel 提交于 
      Previous patch made the length of the per-CPU skb drop list
configurable. Expose a counter that shows how many packets could not be
enqueued to this list.

This allows users determine the desired queue length.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e9feb580
    • I
      drop_monitor: Make drop queue length configurable · 30328d46
      由 Ido Schimmel 提交于 
      In packet alert mode, each CPU holds a list of dropped skbs that need to
be processed in process context and sent to user space. To avoid
exhausting the system's memory the maximum length of this queue is
currently set to 1000.

Allow users to tune the length of this queue according to their needs.
The configured length is reported to user space when drop monitor
configuration is queried.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      30328d46
    • I
      drop_monitor: Add a command to query current configuration · 444be061
      由 Ido Schimmel 提交于 
      Users should be able to query the current configuration of drop monitor
before they start using it. Add a command to query the existing
configuration which currently consists of alert mode and packet
truncation length.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      444be061
    • I
      drop_monitor: Allow truncation of dropped packets · 57986617
      由 Ido Schimmel 提交于 
      When sending dropped packets to user space it is not always necessary to
copy the entire packet as usually only the headers are of interest.

Allow user to specify the truncation length and add the original length
of the packet as additional metadata to the netlink message.

By default no truncation is performed.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      57986617
    • I
      drop_monitor: Add packet alert mode · ca30707d
      由 Ido Schimmel 提交于 
      So far drop monitor supported only one alert mode in which a summary of
locations in which packets were recently dropped was sent to user space.

This alert mode is sufficient in order to understand that packets were
dropped, but lacks information to perform a more detailed analysis.

Add a new alert mode in which the dropped packet itself is passed to
user space along with metadata: The drop location (as program counter
and resolved symbol), ingress netdevice and drop timestamp. More
metadata can be added in the future.

To avoid performing expensive operations in the context in which
kfree_skb() is invoked (can be hard IRQ), the dropped skb is cloned and
queued on per-CPU skb drop list. Then, in process context the netlink
message is allocated, prepared and finally sent to user space.

The per-CPU skb drop list is limited to 1000 skbs to prevent exhausting
the system's memory. Subsequent patches will make this limit
configurable and also add a counter that indicates how many skbs were
tail dropped.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ca30707d
    • I
      drop_monitor: Add alert mode operations · 28315f79
      由 Ido Schimmel 提交于 
      The next patch is going to add another alert mode in which the dropped
packet is notified to user space, instead of only a summary of recent
drops.

Abstract the differences between the modes by adding alert mode
operations. The operations are selected based on the currently
configured mode and associated with the probes and the work item just
before tracing starts.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      28315f79
  9. 04 8月, 2019 1 次提交
    • Q
      net/socket: fix GCC8+ Wpacked-not-aligned warnings · 5e5412c3
      由 Qian Cai 提交于 
      There are a lot of those warnings with GCC8+ 64-bit,

In file included from ./include/linux/sctp.h:42,
                 from net/core/skbuff.c:47:
./include/uapi/linux/sctp.h:395:1: warning: alignment 4 of 'struct
sctp_paddr_change' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:728:1: warning: alignment 4 of 'struct
sctp_setpeerprim' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:727:26: warning: 'sspp_addr' offset 4 in
'struct sctp_setpeerprim' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage sspp_addr;
                          ^~~~~~~~~
./include/uapi/linux/sctp.h:741:1: warning: alignment 4 of 'struct
sctp_prim' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:740:26: warning: 'ssp_addr' offset 4 in
'struct sctp_prim' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage ssp_addr;
                          ^~~~~~~~
./include/uapi/linux/sctp.h:792:1: warning: alignment 4 of 'struct
sctp_paddrparams' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:784:26: warning: 'spp_address' offset 4 in
'struct sctp_paddrparams' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage spp_address;
                          ^~~~~~~~~~~
./include/uapi/linux/sctp.h:905:1: warning: alignment 4 of 'struct
sctp_paddrinfo' is less than 8 [-Wpacked-not-aligned]
 } __attribute__((packed, aligned(4)));
 ^
./include/uapi/linux/sctp.h:899:26: warning: 'spinfo_address' offset 4
in 'struct sctp_paddrinfo' isn't aligned to 8 [-Wpacked-not-aligned]
  struct sockaddr_storage spinfo_address;
                          ^~~~~~~~~~~~~~

This is because the commit 20c9c825 ("[SCTP] Fix SCTP socket options
to work with 32-bit apps on 64-bit kernels.") added "packed, aligned(4)"
GCC attributes to some structures but one of the members, i.e, "struct
sockaddr_storage" in those structures has the attribute,
"aligned(__alignof__ (struct sockaddr *)" which is 8-byte on 64-bit
systems, so the commit overwrites the designed alignments for
"sockaddr_storage".

To fix this, "struct sockaddr_storage" needs to be aligned to 4-byte as
it is only used in those packed sctp structure which is part of UAPI,
and "struct __kernel_sockaddr_storage" is used in some other
places of UAPI that need not to change alignments in order to not
breaking userspace.

Use an implicit alignment for "struct __kernel_sockaddr_storage" so it
can keep the same alignments as a member in both packed and un-packed
structures without breaking UAPI.
Suggested-by: NDavid Laight <David.Laight@ACULAB.COM>
Signed-off-by: NQian Cai <cai@lca.pw>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      5e5412c3
  11. 01 8月, 2019 1 次提交
  13. 31 7月, 2019 2 次提交
  15. 30 7月, 2019 1 次提交
  17. 29 7月, 2019 1 次提交
  19. 26 7月, 2019 3 次提交
  21. 25 7月, 2019 2 次提交
    • L
      tty: serial: netx: Delete driver · 4a2b8560
      由 Linus Walleij 提交于 
      The Netx ARM machine was deleted from the kernel. This driver
had no users and has to go.

Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.orgSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      4a2b8560
    • M
      treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers · d9c52522
      由 Masahiro Yamada 提交于 
      UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.

The exception note is missing in some UAPI headers.

Some of them slipped in by the treewide conversion commit b2441318
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:

  $ git show --oneline b2441318 -- arch/x86/include/uapi/asm/

I believe they are not intentional, and should be fixed too.

This patch was generated by the following script:

  git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
  while read file
  do
          sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
  done

After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.

  $ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
  include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
  include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      d9c52522
  23. 24 7月, 2019 1 次提交
  25. 22 7月, 2019 1 次提交
  27. 21 7月, 2019 1 次提交
  29. 17 7月, 2019 10 次提交
  31. 16 7月, 2019 1 次提交