1. 02 10月, 2014 3 次提交
  2. 18 9月, 2014 2 次提交
  3. 11 9月, 2014 9 次提交
  4. 09 9月, 2014 6 次提交
    • T
      bdi: reimplement bdev_inode_switch_bdi() · 018a17bd
      Tejun Heo 提交于
      A block_device may be attached to different gendisks and thus
      different bdis over time.  bdev_inode_switch_bdi() is used to switch
      the associated bdi.  The function assumes that the inode could be
      dirty and transfers it between bdis if so.  This is a bit nasty in
      that it reaches into bdi internals.
      
      This patch reimplements the function so that it writes out the inode
      if dirty.  This is a lot simpler and can be implemented without
      exposing bdi internals.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Alexander Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NJens Axboe <axboe@fb.com>
      018a17bd
    • T
      bdi: explain the dirty list transferring in bdi_destroy() · 1a1e4530
      Tejun Heo 提交于
      bdi_destroy() has code to transfer the remaining dirty inodes to the
      default_backing_dev_info; however, given the shutdown sequence, it
      isn't clear how such condition would happen.  Also, it isn't a full
      solution as the transferred inodes stlil point to the bdi which is
      being destroyed.  Operations on those inodes can end up accessing
      already released fields such as the percpu stat fields.
      
      Digging through the history, it seems that the code was added as a
      quick workaround for a bug report without fully root-causing the
      issue.  We probably want to remove the code in time but for now let's
      add a comment noting that it is a quick workaround.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Signed-off-by: NJens Axboe <axboe@fb.com>
      1a1e4530
    • T
      bdi: make backing_dev_info->wb.dwork canceling stricter · c0ea1c22
      Tejun Heo 提交于
      Canceling of bdi->wb.dwork is currently a bit mushy.
      bdi_wb_shutdown() performs cancel_delayed_work_sync() at the end after
      shutting down and flushing the delayed_work and bdi_destroy() tries
      yet again after bdi_unregister().
      
      bdi->wb.dwork is queued only after checking BDI_registered while
      holding bdi->wb_lock and bdi_wb_shutdown() clears the flag while
      holding the same lock and then flushes the delayed_work.  There's no
      way the delayed_work can be queued again after that.
      
      Replace the two unnecessary cancel_delayed_work_sync() invocations
      with WARNs on pending.  This simplifies and clarifies the code a bit
      and will help future changes in further isolating bdi_writeback
      handling.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Signed-off-by: NJens Axboe <axboe@fb.com>
      c0ea1c22
    • T
      bdi: remove bdi->wb_lock locking around bdi->dev clearing in bdi_unregister() · b6875734
      Tejun Heo 提交于
      The only places where NULL test on bdi->dev is used are
      bdi_[un]register().  The functions can't be called in parallel anyway
      and there's no point in protecting bdi->dev clearing with a lock.
      Remove bdi->wb_lock grabbing around bdi->dev clearing and move it
      after device_unregister() call so that bdi->dev doesn't have to be
      cached in a local variable.
      
      This patch shouldn't introduce any behavior difference.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Signed-off-by: NJens Axboe <axboe@fb.com>
      b6875734
    • T
      bdi: remove unused stuff · e36f1dfc
      Tejun Heo 提交于
      Two flags and one bdi_writeback field are no longer used.  Remove
      them.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Signed-off-by: NJens Axboe <axboe@fb.com>
      e36f1dfc
    • T
      block, bdi: an active gendisk always has a request_queue associated with it · ff9ea323
      Tejun Heo 提交于
      bdev_get_queue() returns the request_queue associated with the
      specified block_device.  blk_get_backing_dev_info() makes use of
      bdev_get_queue() to determine the associated bdi given a block_device.
      
      All the callers of bdev_get_queue() including
      blk_get_backing_dev_info() assume that bdev_get_queue() may return
      NULL and implement NULL handling; however, bdev_get_queue() requires
      the passed in block_device is opened and attached to its gendisk.
      Because an active gendisk always has a valid request_queue associated
      with it, bdev_get_queue() can never return NULL and neither can
      blk_get_backing_dev_info().
      
      Make it clear that neither of the two functions can return NULL and
      remove NULL handling from all the callers.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Cc: Chris Mason <clm@fb.com>
      Cc: Dave Chinner <david@fromorbit.com>
      Signed-off-by: NJens Axboe <axboe@fb.com>
      ff9ea323
  5. 08 9月, 2014 1 次提交
    • T
      blkcg: remove blkcg->id · f4da8072
      Tejun Heo 提交于
      blkcg->id is a unique id given to each blkcg; however, the
      cgroup_subsys_state which each blkcg embeds already has ->serial_nr
      which can be used for the same purpose.  Drop blkcg->id and replace
      its uses with blkcg->css.serial_nr.  Rename cfq_cgroup->blkcg_id to
      ->blkcg_serial_nr and @id in check_blkcg_changed() to @serial_nr for
      consistency.
      Signed-off-by: NTejun Heo <tj@kernel.org>
      Acked-by: NVivek Goyal <vgoyal@redhat.com>
      Signed-off-by: NJens Axboe <axboe@fb.com>
      f4da8072
  6. 29 8月, 2014 2 次提交
  7. 27 8月, 2014 1 次提交
  8. 26 8月, 2014 5 次提交
    • L
      Linux 3.17-rc2 · 52addcf9
      Linus Torvalds 提交于
      52addcf9
    • L
      Merge tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs · f01bfc97
      Linus Torvalds 提交于
      Pull NFS client fixes from Trond Myklebust:
       "Highlights:
      
         - more fixes for read/write codepath regressions
           * sleeping while holding the inode lock
           * stricter enforcement of page contiguity when coalescing requests
           * fix up error handling in the page coalescing code
      
         - don't busy wait on SIGKILL in the file locking code"
      
      * tag 'nfs-for-3.17-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
        nfs: Don't busy-wait on SIGKILL in __nfs_iocounter_wait
        nfs: can_coalesce_requests must enforce contiguity
        nfs: disallow duplicate pages in pgio page vectors
        nfs: don't sleep with inode lock in lock_and_join_requests
        nfs: fix error handling in lock_and_join_requests
        nfs: use blocking page_group_lock in add_request
        nfs: fix nonblocking calls to nfs_page_group_lock
        nfs: change nfs_page_group_lock argument
      f01bfc97
    • L
      Merge tag 'renesas-sh-drivers-for-v3.17' of... · dd5957b7
      Linus Torvalds 提交于
      Merge tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas
      
      Pull SH driver fix from Simon Horman:
       "Confine SH_INTC to platforms that need it"
      
      * tag 'renesas-sh-drivers-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
        sh: intc: Confine SH_INTC to platforms that need it
      dd5957b7
    • L
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 497c01dd
      Linus Torvalds 提交于
      Pull MIPS fixes from Ralf Baechle:
       "Pretty much all across the field so with this we should be in
        reasonable shape for the upcoming -rc2"
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: OCTEON: make get_system_type() thread-safe
        MIPS: CPS: Initialize EVA before bringing up VPEs from secondary cores
        MIPS: Malta: EVA: Rename 'eva_entry' to 'platform_eva_init'
        MIPS: EVA: Add new EVA header
        MIPS: scall64-o32: Fix indirect syscall detection
        MIPS: syscall: Fix AUDIT value for O32 processes on MIPS64
        MIPS: Loongson: Fix COP2 usage for preemptible kernel
        MIPS: NL: Fix nlm_xlp_defconfig build error
        MIPS: Remove race window in page fault handling
        MIPS: Malta: Improve system memory detection for '{e, }memsize' >= 2G
        MIPS: Alchemy: Fix db1200 PSC clock enablement
        MIPS: BCM47XX: Fix reboot problem on BCM4705/BCM4785
        MIPS: Remove duplicated include from numa.c
        MIPS: Add common plat_irq_dispatch declaration
        MIPS: MSP71xx: remove unused plat_irq_dispatch() argument
        MIPS: GIC: Remove useless parens from GICBIS().
        MIPS: perf: Mark pmu interupt IRQF_NO_THREAD
      497c01dd
    • L
      Merge tag 'trace-fixes-v3.17-rc1' of... · 01e9982a
      Linus Torvalds 提交于
      Merge tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
      
      Pull fix for ftrace function tracer/profiler conflict from Steven Rostedt:
       "The rewrite of the ftrace code that makes it possible to allow for
        separate trampolines had a design flaw with the interaction between
        the function and function_graph tracers.
      
        The main flaw was the simplification of the use of multiple tracers
        having the same filter (like function and function_graph, that use the
        set_ftrace_filter file to filter their code).  The design assumed that
        the two tracers could never run simultaneously as only one tracer can
        be used at a time.  The problem with this assumption was that the
        function profiler could be implemented on top of the function graph
        tracer, and the function profiler could run at the same time as the
        function tracer.  This caused the assumption to be broken and when
        ftrace detected this failed assumpiton it would spit out a nasty
        warning and shut itself down.
      
        Instead of using a single ftrace_ops that switches between the
        function and function_graph callbacks, the two tracers can again use
        their own ftrace_ops.  But instead of having a complex hierarchy of
        ftrace_ops, the filter fields are placed in its own structure and the
        ftrace_ops can carefully use the same filter.  This change took a bit
        to be able to allow for this and currently only the global_ops can
        share the same filter, but this new design can easily be modified to
        allow for any ftrace_ops to share its filter with another ftrace_ops.
      
        The first four patches deal with the change of allowing the ftrace_ops
        to share the filter (and this needs to go to 3.16 as well).
      
        The fifth patch fixes a bug that was also caused by the new changes
        but only for archs other than x86, and only if those archs implement a
        direct call to the function_graph tracer which they do not do yet but
        will in the future.  It does not need to go to stable, but needs to be
        fixed before the other archs update their code to allow direct calls
        to the function_graph trampoline"
      
      * tag 'trace-fixes-v3.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
        ftrace: Use current addr when converting to nop in __ftrace_replace_code()
        ftrace: Fix function_profiler and function tracer together
        ftrace: Fix up trampoline accounting with looping on hash ops
        ftrace: Update all ftrace_ops for a ftrace_hash_ops update
        ftrace: Allow ftrace_ops to use the hashes from other ops
      01e9982a
  9. 25 8月, 2014 10 次提交
    • L
      Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 7be141d0
      Linus Torvalds 提交于
      Pull x86 fixes from Ingo Molnar:
       "A couple of EFI fixes, plus misc fixes all around the map"
      
      * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        efi/arm64: Store Runtime Services revision
        firmware: Do not use WARN_ON(!spin_is_locked())
        x86_32, entry: Clean up sysenter_badsys declaration
        x86/doc: Fix the 'tlb_single_page_flush_ceiling' sysconfig path
        x86/mm: Fix sparse 'tlb_single_page_flush_ceiling' warning and make the variable read-mostly
        x86/mm: Fix RCU splat from new TLB tracepoints
      7be141d0
    • L
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 44744bb3
      Linus Torvalds 提交于
      Pull perf fixes from Ingo Molnar:
       "A kprobes and a perf compat ioctl fix"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf: Handle compat ioctl
        kprobes: Skip kretprobe hit in NMI context to avoid deadlock
      44744bb3
    • L
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 959dc258
      Linus Torvalds 提交于
      Pull ARM SoC fixes from Olof Johansson:
       "A collection of fixes from this week, it's been pretty quiet and
        nothing really stands out as particularly noteworthy here -- mostly
        minor fixes across the field:
      
         - ODROID booting was fixed due to PMIC interrupts missing in DT
         - a collection of i.MX fixes
         - minor Tegra fix for regulators
         - Rockchip fix and addition of SoC-specific mailing list to make it
           easier to find posted patches"
      
      * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
        bus: arm-ccn: Fix warning message
        ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux
        ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies
        MAINTAINERS: add new Rockchip SoC list
        ARM: dts: rockchip: readd missing mmc0 pinctrl settings
        ARM: dts: ODROID i2c improvements
        ARM: dts: Enable PMIC interrupts on ODROID
        ARM: dts: imx6sx: fix the pad setting for uart CTS_B
        ARM: dts: i.MX53: fix apparent bug in VPU clks
        ARM: imx: correct gpu2d_axi and gpu3d_axi clock setting
        ARM: dts: imx6: edmqmx6: change enet reset pin
        ARM: dts: vf610-twr: Fix pinctrl_esdhc1 pin definitions.
        ARM: imx: remove unnecessary ARCH_HAS_OPP select
        ARM: imx: fix TLB missing of IOMUXC base address during suspend
        ARM: imx6: fix SMP compilation again
        ARM: dt: sun6i: Add #address-cells and #size-cells to i2c controller nodes
      959dc258
    • L
      Merge tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · fa7f78e0
      Linus Torvalds 提交于
      Pull gpio fixes from Linus Walleij:
      
       - a largeish fix for the IRQ handling in the new Zynq driver.  The
         quite verbose commit message gives the exact details.
       - move some defines for gpiod flags outside an ifdef to make stub
         functions work again.
       - various minor fixes that we can accept for -rc1.
      
      * tag 'gpio-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio-lynxpoint: enable input sensing in resume
        gpio: move GPIOD flags outside #ifdef
        gpio: delete unneeded test before of_node_put
        gpio: zynq: Fix IRQ handlers
        gpiolib: devres: use correct structure type name in sizeof
        MAINTAINERS: Change maintainer for gpio-bcm-kona.c
      fa7f78e0
    • L
      Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux · 5e30ca1e
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "Intel and radeon fixes.
      
        Post KS/LC git requests from i915 and radeon stacked up.  They are all
        fixes along with some new pci ids for radeon, and one maintainers file
        entry.
      
         - i915: display fixes and irq fixes
         - radeon: pci ids, and misc gpuvm, dpm and hdp cache"
      
      * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (29 commits)
        MAINTAINERS: Add entry for Renesas DRM drivers
        drm/radeon: add additional SI pci ids
        drm/radeon: add new bonaire pci ids
        drm/radeon: add new KV pci id
        Revert "drm/radeon: Use write-combined CPU mappings of ring buffers with PCIe"
        drm/radeon: fix active_cu mask on SI and CIK after re-init (v3)
        drm/radeon: fix active cu count for SI and CIK
        drm/radeon: re-enable selective GPUVM flushing
        drm/radeon: Sync ME and PFP after CP semaphore waits v4
        drm/radeon: fix display handling in radeon_gpu_reset
        drm/radeon: fix pm handling in radeon_gpu_reset
        drm/radeon: Only flush HDP cache for indirect buffers from userspace
        drm/radeon: properly document reloc priority mask
        drm/i915: don't try to retrain a DP link on an inactive CRTC
        drm/i915: make sure VDD is turned off during system suspend
        drm/i915: cancel hotplug and dig_port work during suspend and unload
        drm/i915: fix HPD IRQ reenable work cancelation
        drm/i915: take display port power domain in DP HPD handler
        drm/i915: Don't try to enable cursor from setplane when crtc is disabled
        drm/i915: Skip load detect when intel_crtc->new_enable==true
        ...
      5e30ca1e
    • B
      aio: fix reqs_available handling · d856f32a
      Benjamin LaHaise 提交于
      As reported by Dan Aloni, commit f8567a38 ("aio: fix aio request
      leak when events are reaped by userspace") introduces a regression when
      user code attempts to perform io_submit() with more events than are
      available in the ring buffer.  Reverting that commit would reintroduce a
      regression when user space event reaping is used.
      
      Fixing this bug is a bit more involved than the previous attempts to fix
      this regression.  Since we do not have a single point at which we can
      count events as being reaped by user space and io_getevents(), we have
      to track event completion by looking at the number of events left in the
      event ring.  So long as there are as many events in the ring buffer as
      there have been completion events generate, we cannot call
      put_reqs_available().  The code to check for this is now placed in
      refill_reqs_available().
      
      A test program from Dan and modified by me for verifying this bug is available
      at http://www.kvack.org/~bcrl/20140824-aio_bug.c .
      Reported-by: NDan Aloni <dan@kernelim.com>
      Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
      Acked-by: NDan Aloni <dan@kernelim.com>
      Cc: Kent Overstreet <kmo@daterainc.com>
      Cc: Mateusz Guzik <mguzik@redhat.com>
      Cc: Petr Matousek <pmatouse@redhat.com>
      Cc: stable@vger.kernel.org      # v3.16 and anything that f8567a38 was backported to
      Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      d856f32a
    • P
      bus: arm-ccn: Fix warning message · bf87bb12
      Pawel Moll 提交于
      A message warning a user about wrong vc value was printing
      out port instead.
      Reported-by: NDrew Richardson <drew.richardson@arm.com>
      Signed-off-by: NPawel Moll <pawel.moll@arm.com>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      bf87bb12
    • G
      ARM: shmobile: koelsch: Remove non-existent i2c6 pinmux · 12266db7
      Geert Uytterhoeven 提交于
      On r8a7791, i2c6 (aka iic3) doesn't need pinmux, but the koelsch dts
      refers to non-existent pinmux configuration data:
      
      pinmux core: sh-pfc does not support function i2c6
      sh-pfc e6060000.pfc: invalid function i2c6 in map table
      
      Remove it to fix this.
      
      Fixes: commit 1d41f36a ("ARM: shmobile:
             koelsch dts: Add VDD MPU regulator for DVFS")
      Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
      Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      12266db7
    • M
      ARM: tegra: apalis/colibri t30: fix on-module 5v0 supplies · caa9eac5
      Marcel Ziswiler 提交于
      Working on Gigabit/PCIe support in U-Boot for Apalis T30 I realised
      that the current device tree source includes for our modules only
      happen to work due to referencing the on-carrier 5v0 supply from USB
      which is not at all available on-module. The modules actually contain
      TPS60150 charge pumps to generate the PMIC required 5 volts from the
      one and only 3.3 volt module supply. This patch fixes this.
      
      (Note: When back-porting this to v3.16 stable releases, simply drop the
      change to tegra30-apalis.dtsi; that file was added in v3.17)
      
      Cc: <stable@vger.kernel.org> #v3.16+
      Signed-off-by: NMarcel Ziswiler <marcel@ziswiler.com>
      Signed-off-by: NStephen Warren <swarren@nvidia.com>
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      caa9eac5
    • O
      Merge tag 'v3.17-rockchip-fixes1' of... · 9d0b1f34
      Olof Johansson 提交于
      Merge tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
      
      Merge "ARM: rockchip: fix for 3.17" from Heiko Stubner:
      
      Pinctrl that got accidentially dropped when reorganizing the
      dts files and addition of the new Rockchip list to MAINTAINERS.
      
      * tag 'v3.17-rockchip-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
        MAINTAINERS: add new Rockchip SoC list
        ARM: dts: rockchip: readd missing mmc0 pinctrl settings
      Signed-off-by: NOlof Johansson <olof@lixom.net>
      9d0b1f34
  10. 24 8月, 2014 1 次提交