Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio
Controller.

[changed to use AZX_DRIVER_GENERIC by tiwai]
Signed-off-by: NBankim Bhavsar <bbhavsar@vmware.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Attached a patch which add a new model to support multi-streaming
playback for ad1988.

playback another stereo stream through the front panel headphone on
device 2 while playback through the speakers connected to rear panel
on device 0 at the same time.

Tested with ad1988a rev2 codec on asus P5B-V motherboard.
Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit ad09fc9d didn't cover the
case for Intel and Nvidia HDMIs, where hdmi_pcm_open() is called.
Put the hw_constraint there, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In hdmi_pcm_open(), the evaluated PCM hw parameters are stored in
hinfo, but these aren't properly set back to the current runtime
record since these have been set beforehand in azx_pcm_open().
This patch fixes the behavior.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It looks like that HDMI codecs don't support the odd number of channels
although HD-audio spec doesn't have the restriction.  Add the
hw_constraint to limit to only the even number of channels.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In some cases, the fix-up is required in the init callback to be called
both at the first initialization and at the resume.  The new action type
ALC_FIXUP_ACT_INIT is used for this case.

So far, only ALC275_FIXUP_SONY_HWEQ uses this.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Instead of keeping various data types in a single record, put the
type field and keep a single value in each entry, but allows chaining
multiple fixup entries.  This allows more flexible data management
(see ALC275_FIXUP_SONY_HWEQ for example).
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This should be applied also only once as a part of the initialization.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The amp-override is necessary only once at initialization time.
Also fixed a coding style issue.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... and a minor cleanup.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When only one mic is available and it's an analog mic, the current
IDT/STAC parser may give an Oops.

Reference: bko#25692
	https://bugzilla.kernel.org/show_bug.cgi?id=25692Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

With GPIO2-fixup, another fixup for NID 0x19 was missing because the
fixup is applied only once.  Add the corresponding verb to the entry.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

SONY VAIO ALC275 default BIOS verb set the hardware EQ to disable.
Enable it when driver is loading.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Lenovo NB 0x9e54 use the external AMP in an inverted manner.
Set EAPD to low will enable the AMP.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The proper initializatio of NID 0x15 EAPD is missing in the quirk for
Acer 4930G.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added hardware constraint in patch_hdmi.c to disable
channels 4/6 which are not supported by some older
NVIDIA GPUs.
Signed-off-by: NNitin Daga <ndaga@nvidia.com>
Acked-By: NStephen Warren <swarren@nvidia.com>
Cc: <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The dynamic PCM restriction based on ELD information may lead to the
problem in some cases, e.g. when the receiver is turned off.  Then it
may send a TV HDMI default such as channels = 2.  Since it's still
plugged, the driver doesn't know whether it's the right configuration
for future use.  Now, when an app opens the device at this moment,
then turn on the receiver, the app still sends channels=2.

The right solution is to implement some kind of notification and
automatic re-open mechanism.  But, this is a goal far ahead.

This patch provides a workaround for such a case by providing a new
module option static_hdmi_pcm for snd-hda-codec-hdmi module.  When
this is set to true, the driver doesn't change PCM parameters per
ELD information.  For users who need the static configuration like
the scenario above, set this to true.

The parameter can be changed dynamically via sysfs, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

When unplugged, we shouldn't refer to ELD information for PCM open
any more.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

So far, Realtek auto-parser assumed that the multiple pins are only for
line-outs, and assigned the channel names like Front, Surround, etc for
the multiple outputs.  But, there are devices that have multiple
headphones, and these can be better controlled with the corresponding
control-name like "Headphone" with indicies.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When multiple headphone pins are defined without line-out pins, the
driver takes them as primary outputs.  But it forgot to set line_out_type
to HP by assuming there is some rest of HP pins.  This results in some
mis-handling of these pins for Realtek codec parser.  It takes as if
these are pure line-out jacks.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>

BugLink: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5184

A user reported on the alsa-devel mailing list that he needs to use
the vostro model quirk to have audible playback, so apply it for his
PCI SSID.
Reported-and-tested-by: NFernando Lemos <fernandotcl@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: http://bugs.launchpad.net/bugs/689036

Many new Lenovos need the ideapad quirk. Also, since the
auto parser for this chip is far from optimal, the regression
risk is low (although not zero).
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

If more than one mic is present with different locations,
e g "Front Mic" and "Rear Mic", they can use the same index (0),
since their names are different.

Previous behavior was to have "Front Mic" as index 1, causing it
to be ignored by e g PulseAudio.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: http://bugs.launchpad.net/bugs/697240

If the "Volume" suffix is not given, alsa-lib gets confused and
loses the dB information at the simple element level.

Boosts generally affects both playback and capture, as they are
applied early in the chain. Hence no "Playback" or "Capture" in
the suffix.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BugLink: http://bugs.launchpad.net/bugs/696493

According to datasheet (and real-world testing), IDT 92HD88B can
have internal mics at NID 0x11 and 0x20, so enable them accordingly.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Sjoerd Simons reports that, without using position_fix=1, recording
experiences overruns. Work around that by applying the LPIB quirk
for his hardware.
Reported-and-tested-by: NSjoerd Simons <sjoerd@debian.org>
Cc: <stable@kernel.org>
Signed-off-by: NDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The load_mixer_volumes() function, which can be triggered by
unprivileged users via the SOUND_MIXER_SETLEVELS ioctl, is vulnerable to
a buffer overflow.  Because the provided "name" argument isn't
guaranteed to be NULL terminated at the expected 32 bytes, it's possible
to overflow past the end of the last element in the mixer_vols array.
Further exploitation can result in an arbitrary kernel write (via
subsequent calls to load_mixer_volumes()) leading to privilege
escalation, or arbitrary kernel reads via get_mixer_levels().  In
addition, the strcmp() may leak bytes beyond the mixer_vols array.
Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The fix-up entries by the commit 2785591a
     ALSA: hda - Add fix-up for Sony VAIO with ALC275 codecs
weren't applied in the right position.  They had to be before the quirk
entry matching to all Sony devices.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When a mixer control element was already created with the given name,
try to find another index for avoiding conflicts, instead of breaking
with an error.  This makes the driver more robust.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When the d-mics are assigned to the same purpose of another analog mic
pins, the driver doesn't compute the index properly, resulting in an
error with "existing control".  This patch fixes it.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

ALC275 doesn't require the ALC269 (and its variants) specific init
sequences.  Add the check of codec id.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Set GPIO2 for some Sony VAIO with ALC275 to fix speaker output.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The Coverity checker spotted that we do not always remember to call
va_end() on 'args' in failure paths in snd_pcm_hw_rule_add().
Here's a patch to fix that up (compile tested only) - it also removes
some annoying trailing whitespace that caught my eye while I was in the
area..
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Change non-standard mic control names to standard control names
to clean up the namespace.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Usually external microphones are just labelled "Mic", so rename
"Ext Mic" and "External Mic" to "Mic" to clear up the namespace.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>