- 10 12月, 2005 1 次提交
-
-
由 Jack Morgenstein 提交于
Don't leak packet if it had a timeout, and don't leak timeout struct if queue_packet() fails. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 01 12月, 2005 3 次提交
-
-
由 Sean Hefty 提交于
Use an increasing local ID to avoid re-using identifiers while messages may still be outstanding on the old ID. Without this, a quick connect-disconnect-connect sequence can fail by matching messages for the new connection with the old connection. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Sean Hefty 提交于
Change reject code from TIMEOUT to CONSUMER_REJECT when destroying a cm_id in the process of connecting. Signed-off-by: NSean Hefty <sean.hefty@intel.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
Unlike tavor, the max work queue size is an exact power of 2 for arbel mode, despite what the documentation (of the QUERY_DEV_LIM firmware command) says. Without this patch, on Arbel, we can start with a QP of a valid size and get above the reported limit after rounding to the next power of two. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 30 11月, 2005 7 次提交
-
-
由 Jack Morgenstein 提交于
uverbs needs to track which multicast groups is each qp attached to, in order to properly detach when cleanup is performed on device file close. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
On mem-free HCAs, when posting a long list of send requests, a doorbell must be rung every 255 requests. Add code to handle this. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
If ipoib_ib_dev_up() fails after ipoib_ib_dev_open() is called, then ipoib_ib_dev_stop() needs to be called to clean up. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
race condition: ipoib_ib_dev_flush is accessing child list without locks. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
ipoib_mcast_alloc() uses kzalloc(), so there's no need to zero out members of the mcast struct after it's allocated. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
Make sure mcast->done is initialized to uncompleted value before we submit a new query, so that it's safe to wait on. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Always set path->query to NULL when the SA path record query completes, rather than only when we don't have an address handle. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 29 11月, 2005 3 次提交
-
-
由 Roland Dreier 提交于
It's possible that IPoIB will issue multiple SA queries for the same path struct. Therefore the struct's completion needs to be initialized for each query rather than only once when the struct is allocated, or else we might not wait long enough for later queries to finish and free the path struct too soon. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
ib_umad_write in user_mad.c is looking at rmpp_hdr field in MAD before checking that the MAD actually has the RMPP header. So for a MAD without RMPP header it looks like we are actually checking a bit inside M_Key, or something. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Michael S. Tsirkin 提交于
last pointer is not updated when QP is modified to reset state. This causes data corruption if WQEs are already posted on the queue. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 28 11月, 2005 3 次提交
-
-
由 Adrian Bunk 提交于
The Coverity checker spotted this obvious NULL pointer dereference. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NMark Salyzyn <mark_salyzyn@adaptec.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The Coverity checker spotted this obvious use-after-release bug caused by a wrong order of the cleanups. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The Coverity checker spotted this obvious NULL pointer dereference. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Acked-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 26 11月, 2005 7 次提交
-
-
由 Linus Torvalds 提交于
-
由 Trond Myklebust 提交于
In __rpc_purge_upcall (net/sunrpc/rpc_pipe.c), the newer code to clean up the in_upcall list has a typo. Thanks to Vince Busam <vbusam@google.com> for spotting this! Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
In cases where the server has gone insane, nfs_update_inode() may end up calling nfs_invalidate_inode(), which again calls stuff that takes the inode->i_lock that we're already holding. In addition, given the sort of things we have in NFS these days that need to be cleaned up on inode release, I'm not sure we should ever be calling make_bad_inode(). Fix up spinlock recursion, and limit nfs_invalidate_inode() to clearing the caches, and marking the inode as being stale. Thanks to Steve Dickson <SteveD@redhat.com> for spotting this. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
When caching locks due to holding a file delegation, we must always check against local locks before sending anything to the server. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
-
- 25 11月, 2005 11 次提交
-
-
由 David Gibson 提交于
Blah. The patch [0] I recently sent fixing errors with in_hugepage_area() and prepare_hugepage_range() for powerpc itself has an off-by-one bug. Furthermore, the related functions touches_hugepage_*_range() and within_hugepage_*_range() are also buggy. Some of the bugs, like those addressed in [0] originated with commit 7d24f0b8 where we tweaked the semantics of where hugepages are allowed. Other bugs have been there essentially forever, and are due to the undefined behaviour of '<<' with shift counts greater than the type width (LOW_ESID_MASK could return non-zero for high ranges with the right congruences). The good news is that I now have a testsuite which should pick up things like this if they creep in again. [0] "powerpc-fix-for-hugepage-areas-straddling-4gb-boundary" Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
-
由 Stephen Rothwell 提交于
With the removal of include/asm-powerpc, we no longer need arch/powerpc/include/asm for the 64 bit build. We also do not need -Iarch/powerpc for the 64 bit build either. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Nathan Scott 提交于
SGI-PV: 946205 SGI-Modid: xfs-linux-melb:xfs-kern:24567a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
SGI-PV: 941645 SGI-Modid: xfs-linux-melb:xfs-kern:24566a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Felix Blyakher 提交于
its queue of IO completion callbacks, thus creating the deadlock between umount and xfslogd. Breaking the loop solves the problem. SGI-PV: 943821 SGI-Modid: xfs-linux-melb:xfs-kern:202363a Signed-off-by: NFelix Blyakher <felixb@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Nathan Scott 提交于
direct write. SGI-PV: 944820 SGI-Modid: xfs-linux-melb:xfs-kern:24351a Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Christoph Hellwig 提交于
SGI-PV: 945483 SGI-Modid: xfs-linux-melb:xfs-kern:201884a Signed-off-by: NChristoph Hellwig <hch@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Eric Sandeen 提交于
SGI-PV: 945311 SGI-Modid: xfs-linux-melb:xfs-kern:201708a Signed-off-by: NEric Sandeen <sandeen@sgi.com> Signed-off-by: NNathan Scott <nathans@sgi.com>
-
由 Linus Torvalds 提交于
-
由 Jasper Spaans 提交于
This code fixes a tiny problem with the recent fbcon rotation changes: fb_prepare_logo doesn't check the return value of fb_find_logo and that causes a crash for my while booting. Obvious & working & tested fix is here. Signed-off-by: NJasper Spaans <jasper@vs19.net> Acked-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 11月, 2005 5 次提交
-
-
由 Dave Airlie 提交于
A fix for a locking bug which is triggered when a client tries to lock with flag DMA_QUIESCENT (typically the X server), but gets interrupted by a signal. The locking IOCTL should then return an error, but if DMA_QUIESCENT succeeds it returns 0, and the client falsely thinks it has the lock. In addition The client waits for DMA_QUISCENT and possibly DMA_READY without having the lock. From: Thomas Hellstrom Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Nicolas Kaiser 提交于
remove redundant include Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Randy Dunlap 提交于
Fix kernel-doc warning in linux/usb.h. Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Hrdeman 提交于
On Wed, Nov 16, 2005 at 06:34:24PM -0800, Pete Zaitcev wrote: >On Wed, 16 Nov 2005 23:52:32 +0100, David Hrdeman <david@2gen.com> wrote: >> usb-storage: waiting for device to settle before scanning >> Vendor: I0MEGA Model: UMni1GB*IOM2K4 Rev: 1.01 >> Type: Direct-Access ANSI SCSI revision: 02 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) >> sda: Write Protect is off >> sda: Mode Sense: 00 00 00 00 >> sda: assuming drive cache: write through >> ioctl_internal_command: <8 0 0 0> return code = 8000002 >> : Current: sense key=0x0 >> ASC=0x0 ASCQ=0x0 >> SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB) > >I think it's harmless. I saw things like that, and initially I plugged >them with workarounds like this: Thanks for the pointer, and yes, it is harmless, but it floods the console with the messages which hides other (potentially important) messages...following your example I've made a patch which fixes the problem. Signed-off-by: NDavid Hrdeman <david@2gen.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-