Instead of globally disabling > 32bit DMA using the arch_dma_supported
hook walk the PCI bus under the actually affected bridge and mark every
device with the dma_32bit_limit flag.  This also gets rid of the
arch_dma_supported hook entirely.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

This is something drivers should decide (modulo chipset quirks like
for VIA), which as far as I can tell is how things have been handled
for the last 15 years.

Note that we keep the usedac option for now, as it is used in the wild
to override the too generic VIA quirk.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Limiting the dma mask to avoid PCI (pre-PCIe) DAC cycles while paying
the huge overhead of an IOMMU is rather pointless, and this seriously
gets in the way of dma mapping work.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

This is just the minimal workaround.  The file is mostly either stale
and/or duplicative of Documentation/admin-guide/kernel-parameters.txt,
but that is much more work than I'm willing to do right now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>

Various PCI bridges (VIA PCI, Xilinx PCIe) limit DMA to only 32-bits
even if the device itself supports more.  Add a single bit flag to
struct device (to be moved into the dma extension once we get to it)
to flag such devices and reject larger DMA to them.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NHuaisheng Ye <yehs1@lenovo.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Drivers/subsystems creating scatterlists for DMA should be taking care
to respect the scatter-gather limitations of the appropriate device, as
described by dma_parms. A DMA API implementation cannot feasibly split
a scatterlist into *more* entries than originally passed, so it is not
well defined what they should do when given a segment larger than the
limit they are also required to respect.

Conversely, devices which are less limited than the rather conservative
defaults, or indeed have no limitations at all (e.g. GPUs with their own
internal MMU), should be encouraged to set appropriate dma_parms, as
they may get more efficient DMA mapping performance out of it.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Switch to the generic noncoherent direct mapping implementation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMark Salter <msalter@redhat.com>

Switch to the generic noncoherent direct mapping implementation.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

These functions should perform the same cache synchronoization as calling
arc_dma_sync_single_for_{cpu,device} in addition to doing any required
address translation or mapping [1].  Ensure they actually do that by calling
arc_dma_sync_single_for_{cpu,device} instead of passing the dir argument
along to _dma_cache_sync.

The now unused _dma_cache_sync function is removed as well.

[1] in fact various drivers rely on that by passing DMA_ATTR_SKIP_CPU_SYNC
to the map/unmap routines and doing the cache synchronization manually.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

These functions should perform the same functionality as calling
arc_dma_sync_single_for_{cpu,device} on each S/G list element.  Ensure
they actually do that by calling arc_dma_sync_single_for_{cpu,device}.
Otherwise we could be passing a different dir argument.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

Remove the indirection through _dma_cache_sync.  Also move the functions
up a bit in the source file as we'll need them in more places soon.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

Add a new dma_map_ops implementation that uses dma-direct for the
address mapping of streaming mappings, and which requires arch-specific
implemenations of coherent allocate/free.

Architectures have to provide flushing helpers to ownership trasnfers
to the device and/or CPU, and can provide optional implementations of
the coherent mmap functionality, and the cache_flush routines for
non-coherent long term allocations.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>

ARCH_DMA_ADDR_T_64BIT is always true for 64-bit architectures now, so we
can skip the clause requiring it.  'n' is the default default, so no need
to explicitly state it.
Tested-by: NAlexey Brodkin <abrodkin@synopsys.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

All RISC-V platforms today lack an IOMMU. However, legacy PCI devices
sometimes require DMA-memory to be in the low 32 bits.  To make this work,
we enable the software-based bounce buffers from swiotlb.  They only impose
overhead when the device in question cannot address the full 64-bit address
space, so a perfect fit.

This patch assumes that DMA is coherent with the processor and the PCI
bus.  It also assumes that the processor and devices share a common
address space. This is true for all RISC-V platforms so far.

[changelog stolen from an earlier patch by Palmer Dabbelt that did the
 more complicated swiotlb wireup before the recent consolidation]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>

Until we actually support > 32bit physical addresses for 32-bit using
highmem there is no point in enabling ZONE_DMA32.  And even if such
support is ever added it probably should be conditional to not burden
low end embedded devices.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>

We can deduct this directly using a select from ARCH_RV32I/ARCH_RV64I.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NPalmer Dabbelt <palmer@sifive.com>

swiotlb use physical address of bounce buffer when do map and unmap,
therefore, related comment should be updated.
Signed-off-by: NYisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

swiotlb now selects the DMA_DIRECT_OPS config symbol, so this will
always be true.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This way we have one central definition of it, and user can select it as
needed.  The new option is not user visible, which is the behavior
it had in most architectures, with a few notable exceptions:

 - On x86_64 and mips/loongson3 it used to be user selectable, but
   defaulted to y.  It now is unconditional, which seems like the right
   thing for 64-bit architectures without guaranteed availablity of
   IOMMUs.
 - on powerpc the symbol is user selectable and defaults to n, but
   many boards select it.  This change assumes no working setup
   required a manual selection, but if that turned out to be wrong
   we'll have to add another select statement or two for the respective
   boards.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Only mips and unicore32 select CONFIG_NEED_SG_DMA_LENGTH when building
swiotlb.  swiotlb itself never merges segements and doesn't accesses the
dma_length field directly, so drop the dependency.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJames Hogan <jhogan@kernel.org>

swiotlb is only used as a library of helper for xen-swiotlb if Xen support
is enabled on arm, so don't build it by default.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This symbol is now always identical to CONFIG_ARCH_DMA_ADDR_T_64BIT, so
remove it.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>

Define this symbol if the architecture either uses 64-bit pointers or the
PHYS_ADDR_T_64BIT is set.  This covers 95% of the old arch magic.  We only
need an additional select for Xen on ARM (why anyway?), and we now always
set ARCH_DMA_ADDR_T_64BIT on mips boards with 64-bit physical addressing
instead of only doing it when highmem is set.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJames Hogan <jhogan@kernel.org>

Instead select the PHYS_ADDR_T_64BIT for 32-bit architectures that need a
64-bit phys_addr_t type directly.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NJames Hogan <jhogan@kernel.org>

This way we have one central definition of it, and user can select it as
needed.  Note that we now also always select it when CONFIG_DMA_API_DEBUG
is select, which fixes some incorrect checks in a few network drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

This way we have one central definition of it, and user can select it as
needed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

This way we have one central definition of it, and user can select it as
needed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

This avoids selecting IOMMU_HELPER just for this function.  And we only
use it once or twice in normal builds so this often even is a size
reduction.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

This function is only used by built-in code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

This code is only used by sparc, and all new iommu drivers should use the
drivers/iommu/ framework.  Also remove the unused exports.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Reviewed-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com>

There is no arch specific code required for dma-debug, so there is no
need to opt into the support either.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

Only used by the AMD GART and Intel VT-D drivers, which must be built in.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

Just keep a single variable with a descriptive name instead of two
with confusing names.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

Most mainstream architectures are using 65536 entries, so lets stick to
that.  If someone is really desperate to override it that can still be
done through <asm/dma-mapping.h>, but I'd rather see a really good
rationale for that.

dma_debug_init is now called as a core_initcall, which for many
architectures means much earlier, and provides dma-debug functionality
earlier in the boot process.  This should be safe as it only relies
on the memory allocator already being available.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

This was used by the ide, scsi and networking code in the past to
determine if they should bounce payloads.  Now that the dma mapping
always have to support dma to all physical memory (thanks to swiotlb
for non-iommu systems) there is no need to this crude hack any more.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: Palmer Dabbelt <palmer@sifive.com> (for riscv)
Reviewed-by: NJens Axboe <axboe@kernel.dk>

These days the dma mapping routines must be able to handle any address
supported by the device, be that using an iommu, or swiotlb if none is
supported.  With that the PCI_DMA_BUS_IS_PHYS check in illegal_highdma
is not needed and can be removed.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>

We now have ways to deal with drainage in the block layer, and libata has
been using it for ages.  We also want to get rid of PCI_DMA_BUS_IS_PHYS
now, so just reduce the PCI transfer size for ide - anyone who cares for
performance on PCI controllers should have switched to libata long ago.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJens Axboe <axboe@kernel.dk>

ide_toggle_bounce did select various strange block bounce limits, including
not bouncing at all as soon as an iommu is present in the system.  Given
that the dma_map routines now handle any required bounce buffering except
for ISA DMA, and the ide code already must handle either ISA DMA or highmem
at least for iommu equipped systems we can get rid of the block layer
bounce limit setting entirely.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJens Axboe <axboe@kernel.dk>

We can rely on the dma-mapping code to handle any DMA limits that is
bigger than the ISA DMA mask for us (either using an iommu or swiotlb),
so remove setting the block layer bounce limit for anything but the
unchecked_isa_dma case, or the bouncing for highmem pages.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJens Axboe <axboe@kernel.dk>