When logging new directory entries of a directory, we log the inodes of
new dentries and the inodes of dentries pointing to directories that
may have been created in past transactions. For the case of directories
we log in full mode, which can be particularly expensive for large
directories.

We do use btrfs_inode_in_log() to skip already logged inodes, however for
that helper to return true, it requires that the log transaction used to
log the inode to be already committed. This means that when we have more
than one task using the same log transaction we can end up logging an
inode multiple times, which is a waste of time and not necessary since
the log will be committed by one of the tasks and the others will wait for
the log transaction to be committed before returning to user space.

So simply replace the use of btrfs_inode_in_log() with the new helper
function need_log_inode(), introduced in a previous commit.

This patch is part of a patchset comprised of the following patches:

  btrfs: remove unnecessary directory inode item update when deleting dir entry
  btrfs: stop setting nbytes when filling inode item for logging
  btrfs: avoid logging new ancestor inodes when logging new inode
  btrfs: skip logging directories already logged when logging all parents
  btrfs: skip logging inodes already logged when logging new entries
  btrfs: remove unnecessary check_parent_dirs_for_sync()
  btrfs: make concurrent fsyncs wait less when waiting for a transaction commit

Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Some times when we fsync an inode we need to do a full log of all its
ancestors (due to unlink, link or rename operations), which can be an
expensive operation, specially if the directories are large.

However if we find an ancestor directory inode that is already logged in
the current transaction, and has no inserted/updated/deleted xattrs since
it was last logged, we can skip logging the directory again. We are safe
to skip that since we know that for logged directories, any link, unlink
or rename operations that implicate the directory will update the log as
necessary.

So use the helper need_log_dir(), introduced in a previous commit, to
detect already logged directories that can be skipped.

This patch is part of a patchset comprised of the following patches:

  btrfs: remove unnecessary directory inode item update when deleting dir entry
  btrfs: stop setting nbytes when filling inode item for logging
  btrfs: avoid logging new ancestor inodes when logging new inode
  btrfs: skip logging directories already logged when logging all parents
  btrfs: skip logging inodes already logged when logging new entries
  btrfs: remove unnecessary check_parent_dirs_for_sync()
  btrfs: make concurrent fsyncs wait less when waiting for a transaction commit

Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we fsync a new file, created in the current transaction, we check
all its ancestor inodes and always log them if they were created in the
current transaction - even if we have already logged them before, which
is a waste of time.

So avoid logging new ancestor inodes if they were already logged before
and have no xattrs added/updated/removed since they were last logged.

This patch is part of a patchset comprised of the following patches:

  btrfs: remove unnecessary directory inode item update when deleting dir entry
  btrfs: stop setting nbytes when filling inode item for logging
  btrfs: avoid logging new ancestor inodes when logging new inode
  btrfs: skip logging directories already logged when logging all parents
  btrfs: skip logging inodes already logged when logging new entries
  btrfs: remove unnecessary check_parent_dirs_for_sync()
  btrfs: make concurrent fsyncs wait less when waiting for a transaction commit

Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we fill an inode item for logging we are setting its nbytes field
with the value returned by inode_get_bytes() (a VFS API), however we do
not need it because it is not used during log replay. In fact, for fast
fsyncs, when we call inode_get_bytes() we may even get an outdated value
for nbytes because the nbytes field of the inode is only updated when
ordered extents complete, and a fast fsync only waits for writeback to
complete, it does not wait for ordered extent completion.

So just remove the setup of nbytes and add an explicit comment mentioning
why we do not set it. This also avoids adding contention on the inode's
i_lock (VFS) with concurrent stat() calls, since that spinlock is used by
inode_get_bytes() which is also called by our stat callback
(btrfs_getattr()).

This patch is part of a patchset comprised of the following patches:

  btrfs: remove unnecessary directory inode item update when deleting dir entry
  btrfs: stop setting nbytes when filling inode item for logging
  btrfs: avoid logging new ancestor inodes when logging new inode
  btrfs: skip logging directories already logged when logging all parents
  btrfs: skip logging inodes already logged when logging new entries
  btrfs: remove unnecessary check_parent_dirs_for_sync()
  btrfs: make concurrent fsyncs wait less when waiting for a transaction commit

Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When we remove a directory entry, as part of an unlink operation, if the
directory was logged before we must remove the directory index items from
the log. We are also updating the inode item of the directory to update
its i_size, but that is not necessary because during log replay we do not
need it and we correctly adjust the i_size in the inode item of the
subvolume as we process directory index items and replay deletes.

This is not needed since commit d555438b ("Btrfs: drop dir i_size
when adding new names on replay"), where we explicitly ignore the i_size
of directory inode items on log replay. Before that we used it but it
was buggy as mentioned in that commit's change log (i_size got a larger
value then it should have).

So stop updating the i_size of the directory inode item in the log, as
that is a waste of time, adds more log contention to the log tree and
often results in COWing more extent buffers for the log tree.

This code path is triggered often during dbench workloads for example.
This patch is part of a patchset comprised of the following patches:

  btrfs: remove unnecessary directory inode item update when deleting dir entry
  btrfs: stop setting nbytes when filling inode item for logging
  btrfs: avoid logging new ancestor inodes when logging new inode
  btrfs: skip logging directories already logged when logging all parents
  btrfs: skip logging inodes already logged when logging new entries
  btrfs: remove unnecessary check_parent_dirs_for_sync()
  btrfs: make concurrent fsyncs wait less when waiting for a transaction commit

Performance results, after applying all patches, are mentioned in the
change log of the last patch.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Before this change, the btrfs_get_io_geometry() function was calling
btrfs_get_chunk_map() to get the extent mapping, necessary for
calculating the I/O geometry. It was using that extent mapping only
internally and freeing the pointer after its execution.

That resulted in calling btrfs_get_chunk_map() de facto twice by the
__btrfs_map_block() function. It was calling btrfs_get_io_geometry()
first and then calling btrfs_get_chunk_map() directly to get the extent
mapping, used by the rest of the function.

Change that to passing the extent mapping to the btrfs_get_io_geometry()
function as an argument.

This could improve performance in some cases.  For very large
filesystems, i.e. several thousands of allocated chunks, not only this
avoids searching two times the rbtree, saving time, it may also help
reducing contention on the lock that protects the tree - thinking of
writeback starting for multiple inodes, other tasks allocating or
removing chunks, and anything else that requires access to the rbtree.
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NMichal Rostecki <mrostecki@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ add Filipe's analysis ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Commit dbfdb6d1 ("Btrfs: Search for all ordered extents that could
span across a page") make btrfs_invalidapage() to search all ordered
extents.

The offending code looks like this:

  again:
	  start = page_start;
	  ordered = btrfs_lookup_ordered_range(inode, start, page_end - start + 1);
	  if (ordred) {
		  end = min(page_end,
			    ordered->file_offset + ordered->num_bytes - 1);

		  /* Do the cleanup */

		  start = end + 1;
		  if (start < page_end)
			  goto again;
	  }

The behavior is indeed necessary for the incoming subpage support, but
when it iterates through all the ordered extents, it also resets the
search range @start.

This means, for the following cases, we can double account the ordered
extents, causing its bytes_left underflow:

	Page offset
	0		16K		32K
	|<--- OE 1  --->|<--- OE 2 ---->|

As the first iteration will find ordered extent (OE) 1, which doesn't
cover the full page, thus after cleanup code, we need to retry again.
But again label will reset start to page_start, and we got OE 1 again,
which causes double accounting on OE 1, and cause OE 1's byte_left to
underflow.

This problem can only happen for subpage case, as for regular sectorsize
== PAGE_SIZE case, we will always find a OE ends at or after page end,
thus no way to trigger the problem.

Move the again label after start = page_start.  There will be more
comprehensive rework to convert the open coded loop to a proper while
loop for subpage support.

Fixes: dbfdb6d1 ("Btrfs: Search for all ordered extents that could span across a page")
Reviewed-by: NFilipe Manana <fdmanana@suse.com>
Signed-off-by: NQu Wenruo <wqu@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Fix the following coccicheck warnings:

./fs/btrfs/delayed-inode.c:1157:39-41: WARNING !A || A && B is
equivalent to !A || B.
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Suggested-by: NJiapeng Zhong <oswb@linux.alibaba.com>
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NAbaci Team <abaci-bugfix@linux.alibaba.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The comment for can_nocow_extent() says that the function will flush
ordered extents, however that never happens and was never true before the
comment was added in commit e4ecaf90 ("btrfs: add comments for
btrfs_check_can_nocow() and can_nocow_extent()"). This is true only for
the function btrfs_check_can_nocow(), which after that commit was renamed
to check_can_nocow(). So just remove that part of the comment.
Reviewed-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Often when I'm debugging ENOSPC related issues I have to resort to
printing the entire ENOSPC state with trace_printk() in different spots.
This gets pretty annoying, so add a trace state that does this for us.
Then add a trace point at the end of preemptive flushing so you can see
the state of the space_info when we decide to exit preemptive flushing.
This helped me figure out we weren't kicking in the preemptive flushing
soon enough.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Since we have normal ticketed flushing and preemptive flushing, adjust
the tracepoint so that we know the source of the flushing action to make
it easier to debug problems.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Starting preemptive flushing at 50% of available free space is a good
start, but some workloads are particularly abusive and can quickly
overwhelm the preemptive flushing code and drive us into using tickets.

Handle this by clamping down on our threshold for starting and
continuing to run preemptive flushing.  This is particularly important
for our overcommit case, as we can really drive the file system into
overages and then it's more difficult to pull it back as we start to
actually fill up the file system.

The clamping is essentially 2^CLAMP, but we start at 1 so whatever we
calculate for overcommit is the baseline.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

A lot of this was added all in one go with no explanation, and is a bit
unwieldy and confusing.  Simplify the logic to start preemptive flushing
if we've reserved more than half of our available free space.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently btrfs_calc_reclaim_metadata_size does two things, it returns
the space currently required for flushing by the tickets, and if there
are no tickets it calculates a value for the preemptive flushing.

However for the normal ticketed flushing we really only care about the
space required for tickets.  We will accidentally come in and flush one
time, but as soon as we see there are no tickets we bail out of our
flushing.

Fix this by making btrfs_calc_reclaim_metadata_size really only tell us
what is required for flushing if we have people waiting on space.  Then
move the preemptive flushing logic into need_preemptive_reclaim().  We
ignore btrfs_calc_reclaim_metadata_size() in need_preemptive_reclaim()
because if we are in this path then we made our reservation and there
are not pending tickets currently, so we do not need to check it, simply
do the fuzzy logic to check if we're getting low on space.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

If we're flushing space for tickets then we have
space_info->reclaim_size set and we do not need to do background
reclaim.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

All of our normal flushing is asynchronous reclaim, so this helper is
poorly named.  This is more checking if we need to preemptively flush
space, so rename it to need_preemptive_reclaim.

Also switch it to bool and make it plain static as followup patches will
move more code here.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently if we ever have to flush space because we do not have enough
we allocate a ticket and attach it to the space_info, and then
systematically flush things in the filesystem that hold space
reservations until our space is reclaimed.

However this has a latency cost, we must go to sleep and wait for the
flushing to make progress before we are woken up and allowed to continue
doing our work.

In order to address that we used to kick off the async worker to flush
space preemptively, so that we could be reclaiming space hopefully
before any tasks needed to stop and wait for space to reclaim.

When I introduced the ticketed ENOSPC stuff this broke slightly in the
fact that we were using tickets to indicate if we were done flushing.
No tickets, no more flushing.  However this meant that we essentially
never preemptively flushed.  This caused a write performance regression
that Nikolay noticed in an unrelated patch that removed the committing
of the transaction during btrfs_end_transaction.

The behavior that happened pre that patch was btrfs_end_transaction()
would see that we were low on space, and it would commit the
transaction.  This was bad because in this particular case you could end
up with thousands and thousands of transactions being committed during
the 5 minute reproducer.  With the patch to remove this behavior we got
much more sane transaction commits, but we ended up slower because we
would write for a while, flush, write for a while, flush again.

To address this we need to reinstate a preemptive flushing mechanism.
However it is distinctly different from our ticketing flushing in that
it doesn't have tickets to base it's decisions on.  Instead of bolting
this logic into our existing flushing work, add another worker to handle
this preemptive flushing.  Here we will attempt to be slightly
intelligent about the things that we flushing, attempting to balance
between whichever pool is taking up the most space.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Solely for preemptive flushing, we want to be able to force the
transaction commit without any of the ambiguity of
may_commit_transaction().  This is because may_commit_transaction()
checks tickets and such, and in preemptive flushing we already know
it'll be helpful, so use this to keep the code nice and clean and
straightforward.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
[ add comment ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We track dio_bytes because the shrink delalloc code needs to know if we
have more DIO in flight than we have normal buffered IO.  The reason for
this is because we can't "flush" DIO, we have to just wait on the
ordered extents to finish.

However this is true of all ordered extents.  If we have more ordered
space outstanding than dirty pages we should be waiting on ordered
extents.  We already are ok on this front technically, because we always
do a FLUSH_DELALLOC_WAIT loop, but I want to use the ordered counter in
the preemptive flushing code as well, so change this to count all
ordered bytes instead of just DIO ordered bytes.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While debugging a ENOSPC related performance problem I needed to see the
time difference between start and end of a reserve ticket, so add a
trace point to report when we handle a reserve ticket.

I opted to spit out start_ns itself without calculating the difference
because there could be a gap between enabling the tracepoint and setting
start_ns.  Doing it this way allows us to filter on 0 start_ns so we
don't get bogus entries, and we can easily calculate the time difference
with bpftrace or something else.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

I got a automated message from somebody who runs clang against our
kernels and it's because I used the wrong enum type for what I passed
into flush_space, caught by -Wenum-conversion.  Change the argument to
be explicitly the enum we're expecting to make everything consistent.
Maybe eventually gcc will catch errors like this.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

btrfs_compare_trees and changed_cb use a void *ctx parameter instead of
struct send_ctx *sctx but when used in changed_cb it is immediately
cast to `struct send_ctx *sctx = ctx;`.

changed_cb is only ever called from btrfs_compare_trees and full_send_tree:
- full_send_tree already passes a struct send_ctx *sctx
- btrfs_compare_trees is only called by send_subvol with a struct send_ctx *sctx
- void *ctx in btrfs_compare_trees is only used to be passed to changed_cb

So casting to/from void *ctx seems unnecessary and directly using
struct send_ctx *sctx instead provides better type-safety.

The original reason for using void *ctx in the first place seems to have
been dropped with 1b51d6fc ("btrfs: send: remove indirect callback
parameter for changed_cb").
Signed-off-by: NRoman Anasal <roman.anasal@bdsu.de>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We love running delayed refs in commit_cowonly_roots, but it is a bit
excessive.  I was seeing cases of running 3 or 4 refs a few times in a
row during this time.  Instead simply:

- update all of the roots first
- then run delayed refs
- then handle the empty block groups case
- and then if we have any more dirty roots do the whole thing again

This allows us to be much more efficient with our delayed ref running,
as we can batch a few more operations at once.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

This was added in commit 361048f5 ("Btrfs: fix full backref problem
when inserting shared block reference") to address a problem where we
hit the following BUG_ON() in alloc_reserved_tree_block

        if (node->type == BTRFS_SHARED_BLOCK_REF_KEY) {
                BUG_ON(!(flags & BTRFS_BLOCK_FLAG_FULL_BACKREF));

However this BUG_ON() is bogus, and was removed by previous commit:

  btrfs: remove bogus BUG_ON in alloc_reserved_tree_block

We no longer need to run delayed refs because of this, and can remove
this flushing here.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The fix 361048f5 ("Btrfs: fix full backref problem when inserting
shared block reference") added a delayed ref flushing at subvolume
creation time in order to avoid hitting this particular BUG_ON().

Before this fix, we were tripping the BUG_ON() by

1. Modify snapshot A, which creates blocks with a normal reference for
   snapshot A, as A is the owner of these blocks.  We now have delayed
   refs for these blocks.
2. Create a snapshot of A named B, which pushes references for the
   children blocks of the root node for the new root B, thus creating
   more delayed refs for newly allocated blocks.
3. A is modified, and because the metadata blocks can now be shared, it
   must push FULL_BACKREF references to the children of any block that A
   COWs down it's path to its target key.
4. Delayed refs are run.  Because these are newly allocated blocks, we
   have ->must_insert_reserved reserved set on the delayed ref head, we
   call into alloc_reserved_tree_block() to add the extent item, and
   then add our ref.  At the time of this fix, we were ordering
   FULL_BACKREF delayed ref operations first, so we'd go to add this
   reference and then BUG_ON() because we didn't have the FULL_BACKREF
   flag set.

The patch fixed this problem by making sure we ran the delayed refs
before we had the chance to modify A.  This meant that any *new* blocks
would have had their extent items created _before_ we would ever
actually COW down and generate FULL_BACKREF entries.  Thus the problem
went away.

However this BUG_ON() is actually completely bogus.  The existence of a
full backref doesn't necessarily mean that FULL_BACKREF must be set on
that block, it must only be set on the actual parent itself.  Consider
the example provided above.  If we COW down one path from A, any nodes
are going to have a FULL_BACKREF ref pushed down to _all_ of their
children, but not all of the children are going to have FULL_BACKREF
set.  It is completely valid to have an extent item with normal and full
backrefs without FULL_BACKREF actually set on the block itself.

As a final note, I have been testing with the patch (applied after this
one)

  btrfs: stop running all delayed refs during snapshot

which removed this flushing.  My test was a torture test which did a lot
of operations while snapshotting and deleting snapshots as well as
relocation, and I never tripped this BUG_ON().  This is actually because
at the time of 361048f5, we ordered SHARED keys _before_ normal
references, and thus they would get run first.  However currently they
are ordered _after_ normal references, so we'd do the initial creation
without having a shared reference, and thus not hit this BUG_ON(), which
explains why I didn't start hitting this problem during my testing with
my other patch applied.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The commit d6726335 ("btrfs: qgroup: Make snapshot accounting work
with new extent-oriented qgroup.") added a flush of the delayed refs
during snapshot creation in order to get the qgroup accounting properly.
However this code has changed and been moved to it's own helper that is
skipped if qgroups are turned off.  Move the flushing to the helper, as
we do not need it when qgroups are turned off.

Also add a comment explaining why it exists, and why it doesn't actually
save us.  This will be helpful later when we try to fix qgroup
accounting properly.
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

We try to pre-flush the delayed refs when committing, because we want to
do as little work as possible in the critical section of the transaction
commit.

However doing this twice can lead to very long transaction commit delays
as other threads are allowed to continue to generate more delayed refs,
which potentially delays the commit by multiple minutes in very extreme
cases.

So simply stick to one pre-flush, and then continue the rest of the
transaction commit.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Previously our delayed ref running used the total number of items as the
items to run.  However we changed that to number of heads to run with
the delayed_refs_rsv, as generally we want to run all of the operations
for one bytenr.

But with btrfs_run_delayed_refs(trans, 0) we set our count to 2x the
number of items that we have.  This is generally fine, but if we have
some operation generation loads of delayed refs while we're doing this
pre-flushing in the transaction commit, we'll just spin forever doing
delayed refs.

Fix this to simply pick the number of delayed refs we currently have,
that way we do not end up doing a lot of extra work that's being
generated in other threads.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

I've been running a stress test that runs 20 workers in their own
subvolume, which are running an fsstress instance with 4 threads per
worker, which is 80 total fsstress threads.  In addition to this I'm
running balance in the background as well as creating and deleting
snapshots.  This test takes around 12 hours to run normally, going
slower and slower as the test goes on.

The reason for this is because fsstress is running fsync sometimes, and
because we're messing with block groups we often fall through to
btrfs_commit_transaction, so will often have 20-30 threads all calling
btrfs_commit_transaction at the same time.

These all get stuck contending on the extent tree while they try to run
delayed refs during the initial part of the commit.

This is suboptimal, really because the extent tree is a single point of
failure we only want one thread acting on that tree at once to reduce
lock contention.

Fix this by making the flushing mechanism a bit operation, to make it
easy to use test_and_set_bit() in order to make sure only one task does
this initial flush.

Once we're into the transaction commit we only have one thread doing
delayed ref running, it's just this initial pre-flush that is
problematic.  With this patch my stress test takes around 90 minutes to
run, instead of 12 hours.

The memory barrier is not necessary for the flushing bit as it's
ordered, unlike plain int. The transaction state accessed in
btrfs_should_end_transaction could be affected by that too as it's not
always used under transaction lock. Upon Nikolay's analysis in [1]
it's not necessary:

  In should_end_transaction it's read without holding any locks. (U)

  It's modified in btrfs_cleanup_transaction without holding the
  fs_info->trans_lock (U), but the STATE_ERROR flag is going to be set.

  set in cleanup_transaction under fs_info->trans_lock (L)
  set in btrfs_commit_trans to COMMIT_START under fs_info->trans_lock.(L)
  set in btrfs_commit_trans to COMMIT_DOING under fs_info->trans_lock.(L)
  set in btrfs_commit_trans to COMMIT_UNBLOCK under
  fs_info->trans_lock.(L)

  set in btrfs_commit_trans to COMMIT_COMPLETED without locks but at this
  point the transaction is finished and fs_info->running_trans is NULL (U
  but irrelevant).

  So by the looks of it we can have a concurrent READ race with a WRITE,
  due to reads not taking a lock. In this case what we want to ensure is
  we either see new or old state. I consulted with Will Deacon and he said
  that in such a case we'd want to annotate the accesses to ->state with
  (READ|WRITE)_ONCE so as to avoid a theoretical tear, in this case I
  don't think this could happen but I imagine at some point KCSAN would
  flag such an access as racy (which it is).

[1] https://lore.kernel.org/linux-btrfs/e1fd5cc1-0f28-f670-69f4-e9958b4964e6@suse.comReviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
[ add comments regarding memory barrier ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While running some stress tests I started getting hung task messages.
This is because the delete unused block groups code has to take the
delete_unused_bgs_mutex to do it's work, which is taken by balance to
make sure we don't delete block groups while we're balancing.

The problem is that balance can take a while, and so we were getting
hung task warnings.  We don't need to block and run these things, and
the cleaner is needed to do other work, so trylock on this mutex and
just bail if we can't acquire it right away.
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While testing my error handling patches, I added a error injection site
at btrfs_inc_extent_ref, to validate the error handling I added was
doing the correct thing.  However I hit a pretty ugly corruption while
doing this check, with the following error injection stack trace:

btrfs_inc_extent_ref
  btrfs_copy_root
    create_reloc_root
      btrfs_init_reloc_root
	btrfs_record_root_in_trans
	  btrfs_start_transaction
	    btrfs_update_inode
	      btrfs_update_time
		touch_atime
		  file_accessed
		    btrfs_file_mmap

This is because we do not catch the error from btrfs_inc_extent_ref,
which in practice would be ENOMEM, which means we lose the extent
references for a root that has already been allocated and inserted,
which is the problem.  Fix this by aborting the transaction if we fail
to do the reference modification.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

A weird KASAN problem that Zygo reported could have been easily caught
if we checked for basic things in our backref freeing code.  We have two
methods of freeing a backref node

- btrfs_backref_free_node: this just is kfree() essentially.
- btrfs_backref_drop_node: this actually unlinks the node and cleans up
  everything and then calls btrfs_backref_free_node().

We should mostly be using btrfs_backref_drop_node(), to make sure the
node is properly unlinked from the backref cache, and only use
btrfs_backref_free_node() when we know the node isn't actually linked to
the backref cache.  We made a mistake here and thus got the KASAN splat.

Make this style of issue easier to find by adding some ASSERT()'s to
btrfs_backref_free_node() and adjusting our deletion stuff to properly
init the list so we can rely on list_empty() checks working properly.

  BUG: KASAN: use-after-free in btrfs_backref_cleanup_node+0x18a/0x420
  Read of size 8 at addr ffff888112402950 by task btrfs/28836

  CPU: 0 PID: 28836 Comm: btrfs Tainted: G        W         5.10.0-e35f27394290-for-next+ #23
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  Call Trace:
   dump_stack+0xbc/0xf9
   ? btrfs_backref_cleanup_node+0x18a/0x420
   print_address_description.constprop.8+0x21/0x210
   ? record_print_text.cold.34+0x11/0x11
   ? btrfs_backref_cleanup_node+0x18a/0x420
   ? btrfs_backref_cleanup_node+0x18a/0x420
   kasan_report.cold.10+0x20/0x37
   ? btrfs_backref_cleanup_node+0x18a/0x420
   __asan_load8+0x69/0x90
   btrfs_backref_cleanup_node+0x18a/0x420
   btrfs_backref_release_cache+0x83/0x1b0
   relocate_block_group+0x394/0x780
   ? merge_reloc_roots+0x4a0/0x4a0
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   ? check_flags.part.50+0x6c/0x1e0
   ? btrfs_relocate_chunk+0x120/0x120
   ? kmem_cache_alloc_trace+0xa06/0xcb0
   ? _copy_from_user+0x83/0xc0
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   ? __kasan_check_read+0x11/0x20
   ? check_chain_key+0x1f4/0x2f0
   ? __asan_loadN+0xf/0x20
   ? btrfs_ioctl_get_supported_features+0x30/0x30
   ? kvm_sched_clock_read+0x18/0x30
   ? check_chain_key+0x1f4/0x2f0
   ? lock_downgrade+0x3f0/0x3f0
   ? handle_mm_fault+0xad6/0x2150
   ? do_vfs_ioctl+0xfc/0x9d0
   ? ioctl_file_clone+0xe0/0xe0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags+0x26/0x30
   ? lock_is_held_type+0xc3/0xf0
   ? syscall_enter_from_user_mode+0x1b/0x60
   ? do_syscall_64+0x13/0x80
   ? rcu_read_lock_sched_held+0xa1/0xd0
   ? __kasan_check_read+0x11/0x20
   ? __fget_light+0xae/0x110
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f4c4bdfe427
  RSP: 002b:00007fff33ee6df8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 00007fff33ee6e98 RCX: 00007f4c4bdfe427
  RDX: 00007fff33ee6e98 RSI: 00000000c4009420 RDI: 0000000000000003
  RBP: 0000000000000003 R08: 0000000000000003 R09: 0000000000000078
  R10: fffffffffffff59d R11: 0000000000000202 R12: 0000000000000001
  R13: 0000000000000000 R14: 00007fff33ee8a34 R15: 0000000000000001

  Allocated by task 28836:
   kasan_save_stack+0x21/0x50
   __kasan_kmalloc.constprop.18+0xbe/0xd0
   kasan_kmalloc+0x9/0x10
   kmem_cache_alloc_trace+0x410/0xcb0
   btrfs_backref_alloc_node+0x46/0xf0
   btrfs_backref_add_tree_node+0x60d/0x11d0
   build_backref_tree+0xc5/0x700
   relocate_tree_blocks+0x2be/0xb90
   relocate_block_group+0x2eb/0x780
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 28836:
   kasan_save_stack+0x21/0x50
   kasan_set_track+0x20/0x30
   kasan_set_free_info+0x1f/0x30
   __kasan_slab_free+0xf3/0x140
   kasan_slab_free+0xe/0x10
   kfree+0xde/0x200
   btrfs_backref_error_cleanup+0x452/0x530
   build_backref_tree+0x1a5/0x700
   relocate_tree_blocks+0x2be/0xb90
   relocate_block_group+0x2eb/0x780
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  The buggy address belongs to the object at ffff888112402900
   which belongs to the cache kmalloc-128 of size 128
  The buggy address is located 80 bytes inside of
   128-byte region [ffff888112402900, ffff888112402980)
  The buggy address belongs to the page:
  page:0000000028b1cd08 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888131c810c0 pfn:0x112402
  flags: 0x17ffe0000000200(slab)
  raw: 017ffe0000000200 ffffea000424f308 ffffea0007d572c8 ffff888100040440
  raw: ffff888131c810c0 ffff888112402000 0000000100000009 0000000000000000
  page dumped because: kasan: bad access detected

  Memory state around the buggy address:
   ffff888112402800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
   ffff888112402880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  >ffff888112402900: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                   ^
   ffff888112402980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
   ffff888112402a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Link: https://lore.kernel.org/linux-btrfs/20201208194607.GI31381@hungrycats.org/
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

The backref code is looking for a reloc_root that corresponds to the
given fs root.  However any number of things could have gone wrong while
initializing that reloc_root, like ENOMEM while trying to allocate the
root itself, or EIO while trying to write the root item.  This would
result in no corresponding reloc_root being in the reloc root cache, and
thus would return NULL when we do the find_reloc_root() call.

Because of this we do not want to WARN_ON().  This presumably was meant
to catch developer errors, cases where we messed up adding the reloc
root.  However we can easily hit this case with error injection, and
thus should not do a WARN_ON().

CC: stable@vger.kernel.org # 5.10+
Reported-by: NZygo Blaxell <ce3g8jdj@umail.furryterror.org>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

While doing error injection testing with my relocation patches I hit the
following assert:

  assertion failed: list_empty(&block_group->dirty_list), in fs/btrfs/block-group.c:3356
  ------------[ cut here ]------------
  kernel BUG at fs/btrfs/ctree.h:3357!
  invalid opcode: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 24351 Comm: umount Tainted: G        W         5.10.0-rc3+ #193
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  RIP: 0010:assertfail.constprop.0+0x18/0x1a
  RSP: 0018:ffffa09b019c7e00 EFLAGS: 00010282
  RAX: 0000000000000056 RBX: ffff8f6492c18000 RCX: 0000000000000000
  RDX: ffff8f64fbc27c60 RSI: ffff8f64fbc19050 RDI: ffff8f64fbc19050
  RBP: ffff8f6483bbdc00 R08: 0000000000000000 R09: 0000000000000000
  R10: ffffa09b019c7c38 R11: ffffffff85d70928 R12: ffff8f6492c18100
  R13: ffff8f6492c18148 R14: ffff8f6483bbdd70 R15: dead000000000100
  FS:  00007fbfda4cdc40(0000) GS:ffff8f64fbc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007fbfda666fd0 CR3: 000000013cf66002 CR4: 0000000000370ef0
  Call Trace:
   btrfs_free_block_groups.cold+0x55/0x55
   close_ctree+0x2c5/0x306
   ? fsnotify_destroy_marks+0x14/0x100
   generic_shutdown_super+0x6c/0x100
   kill_anon_super+0x14/0x30
   btrfs_kill_super+0x12/0x20
   deactivate_locked_super+0x36/0xa0
   cleanup_mnt+0x12d/0x190
   task_work_run+0x5c/0xa0
   exit_to_user_mode_prepare+0x1b1/0x1d0
   syscall_exit_to_user_mode+0x54/0x280
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This happened because I injected an error in btrfs_cow_block() while
running the dirty block groups.  When we run the dirty block groups, we
splice the list onto a local list to process.  However if an error
occurs, we only cleanup the transactions dirty block group list, not any
pending block groups we have on our locally spliced list.

In fact if we fail to allocate a path in this function we'll also fail
to clean up the splice list.

Fix this by splicing the list back onto the transaction dirty block
group list so that the block groups are cleaned up.  Then add a 'out'
label and have the error conditions jump to out so that the errors are
handled properly.  This also has the side-effect of fixing a problem
where we would clear 'ret' on error because we unconditionally ran
btrfs_run_delayed_refs().

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

When recovering a relocation, if we run into a reloc root that has 0
refs we simply add it to the reloc_control->reloc_roots list, and then
clean it up later.  The problem with this is __del_reloc_root() doesn't
do anything if the root isn't in the radix tree, which in this case it
won't be because we never call __add_reloc_root() on the reloc_root.

This exit condition simply isn't correct really.  During normal
operation we can remove ourselves from the rb tree and then we're meant
to clean up later at merge_reloc_roots() time, and this happens
correctly.  During recovery we're depending on free_reloc_roots() to
drop our references, but we're short-circuiting.

Fix this by continuing to check if we're on the list and dropping
ourselves from the reloc_control root list and dropping our reference
appropriately.  Change the corresponding BUG_ON() to an ASSERT() that
does the correct thing if we aren't in the rb tree.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Comment for processed extent end of range has an unnecessary "in",
remove it.
Signed-off-by: NNigel Christian <nigel.l.christian@gmail.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

My recent patch set "A variety of lock contention fixes", found here

https://lore.kernel.org/linux-btrfs/cover.1608319304.git.josef@toxicpanda.com/
(Tracked in https://github.com/btrfs/linux/issues/86)

that reduce lock contention on the extent root by running delayed refs
less often resulted in a regression in generic/371.  This test
fallocate()'s the fs until it's full, deletes all the files, and then
tries to fallocate() until full again.

Before these patches we would run all of the delayed refs during
flushing, and then would commit the transaction because we had plenty of
pinned space to recover in order to allocate.  However my patches made
it so we weren't running the delayed refs as aggressively, which meant
that we appeared to have less pinned space when we were deciding to
commit the transaction.

We use the space_info->total_bytes_pinned to approximate how much space
we have pinned.  It's approximate because if we remove a reference to an
extent we may free it, but there may be more references to it than we
know of at that point, but we account it as pinned at the creation time,
and then it's properly accounted when the delayed ref runs.

The way we account for pinned space is if the
delayed_ref_head->total_ref_mod is < 0, because that is clearly a
freeing option.  However there is another case, and that is where
->total_ref_mod == 0 && ->must_insert_reserved == 1.

When we allocate a new extent, we have ->total_ref_mod == 1 and we have
->must_insert_reserved == 1.  This is used to indicate that it is a
brand new extent and will need to have its extent entry added before we
modify any references on the delayed ref head.  But if we subsequently
remove that extent reference, our ->total_ref_mod will be 0, and that
space will be pinned and freed.  Accounting for this case properly
allows for generic/371 to pass with my delayed refs patches applied.

It's important to note that this problem exists without the referenced
patches, it just was uncovered by them.

CC: stable@vger.kernel.org # 5.10
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Currently we pass things around to figure out if we maybe freeing data
based on the state of the delayed refs head.  This makes the accounting
sort of confusing and hard to follow, as it's distinctly separate from
the delayed ref heads stuff, but also depends on it entirely.

Fix this by explicitly adjusting the space_info->total_bytes_pinned in
the delayed refs code.  We now have two places where we modify this
counter, once where we create the delayed and destroy the delayed refs,
and once when we pin and unpin the extents.  This means there is a
slight overlap between delayed refs and the pin/unpin mechanisms, but
this is simply used by the ENOSPC infrastructure to determine if we need
to commit the transaction, so there's no adverse affect from this, we
might simply commit thinking it will give us enough space when it might
not.

CC: stable@vger.kernel.org # 5.10
Reviewed-by: NNikolay Borisov <nborisov@suse.com>
Signed-off-by: NJosef Bacik <josef@toxicpanda.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>

Now that the btrfs' codebase is clean of almost all W=1 warnings let's
enable those checks unconditionally for the entire fs/btrfs/ and its
subdirectories to catch potential errors during development.
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
[ add some comments ]
Signed-off-by: NDavid Sterba <dsterba@suse.com>

These constants are really used internally by zstd and including
linux/zstd.h into users results in the following warnings:

In file included from fs/btrfs/zstd.c:19:
./include/linux/zstd.h:798:21: warning: ‘ZSTD_skippableHeaderSize’ defined but not used [-Wunused-const-variable=]
  798 | static const size_t ZSTD_skippableHeaderSize = 8;
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:796:21: warning: ‘ZSTD_frameHeaderSize_max’ defined but not used [-Wunused-const-variable=]
  796 | static const size_t ZSTD_frameHeaderSize_max = ZSTD_FRAMEHEADERSIZE_MAX;
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:795:21: warning: ‘ZSTD_frameHeaderSize_min’ defined but not used [-Wunused-const-variable=]
  795 | static const size_t ZSTD_frameHeaderSize_min = ZSTD_FRAMEHEADERSIZE_MIN;
      |                     ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:794:21: warning: ‘ZSTD_frameHeaderSize_prefix’ defined but not used [-Wunused-const-variable=]
  794 | static const size_t ZSTD_frameHeaderSize_prefix = 5;

So fix those warnings by turning the constants into defines.
Reviewed-by: NNick Terrell <terrelln@fb.com>
Signed-off-by: NNikolay Borisov <nborisov@suse.com>
Reviewed-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>