seq_put_hex_ll() prints a number in hexadecimal notation and works
faster than seq_printf().

== test.py
  num = 0
  with open("/proc/1/maps") as f:
          while num < 10000 :
                  data = f.read()
                  f.seek(0, 0)
                 num = num + 1
==

== Before patch ==
  $  time python test.py

  real	0m1.561s
  user	0m0.257s
  sys	0m1.302s

== After patch ==
  $ time python test.py

  real	0m0.986s
  user	0m0.279s
  sys	0m0.707s

$ perf -g record python test.py:

== Before patch ==
-   67.42%     2.82%  python   [kernel.kallsyms] [k] show_map_vma.isra.22
   - 64.60% show_map_vma.isra.22
      - 44.98% seq_printf
         - seq_vprintf
            - vsnprintf
               + 14.85% number
               + 12.22% format_decode
                 5.56% memcpy_erms
      + 15.06% seq_path
      + 4.42% seq_pad
   + 2.45% __GI___libc_read

== After patch ==
-   47.35%     3.38%  python   [kernel.kallsyms] [k] show_map_vma.isra.23
   - 43.97% show_map_vma.isra.23
      + 20.84% seq_path
      - 15.73% show_vma_header_prefix
           10.55% seq_put_hex_ll
         + 2.65% seq_put_decimal_ull
           0.95% seq_putc
      + 6.96% seq_pad
   + 2.94% __GI___libc_read

[avagin@openvz.org: use unsigned int instead of int where it is suitable]
  Link: http://lkml.kernel.org/r/20180214025619.4005-1-avagin@openvz.org
[avagin@openvz.org: v2]
  Link: http://lkml.kernel.org/r/20180117082050.25406-1-avagin@openvz.org
Link: http://lkml.kernel.org/r/20180112185812.7710-1-avagin@openvz.orgSigned-off-by: NAndrei Vagin <avagin@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A compiler can optimize away memset calls by replacing them with mov
instructions.  There are KASAN tests that specifically test that KASAN
correctly handles memset calls so we don't want this optimization to
happen.

The solution is to add -fno-builtin flag to test_kasan.ko

Link: http://lkml.kernel.org/r/105ec9a308b2abedb1a0d1fdced0c22d765e4732.1519924383.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When an invalid-free is triggered by one of the KASAN tests, the object
doesn't actually get freed.  This later leads to a BUG failure in
kmem_cache_destroy that checks that there are no allocated objects in
the cache that is being destroyed.

Fix this by calling kmem_cache_free with the proper object address after
the call that triggers invalid-free.

Link: http://lkml.kernel.org/r/286eaefc0a6c3fa9b83b87e7d6dc0fbb5b5c9926.1519924383.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Terrell <terrelln@fb.com>
Cc: Chris Mason <clm@fb.com>
Cc: Yury Norov <ynorov@caviumnetworks.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeff Layton <jlayton@redhat.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kasan_slab_free hook's return value denotes whether the reuse of a
slab object must be delayed (e.g.  when the object is put into memory
qurantine).

The current way SLUB handles this hook is by ignoring its return value
and hardcoding checks similar (but not exactly the same) to the ones
performed in kasan_slab_free, which is prone to making mistakes.

The main difference between the hardcoded checks and the ones in
kasan_slab_free is whether we want to perform a free in case when an
invalid-free or a double-free was detected (we don't).

This patch changes the way SLUB handles this by:
1. taking into account the return value of kasan_slab_free for each of
   the objects, that are being freed;
2. reconstructing the freelist of objects to exclude the ones, whose
   reuse must be delayed.

[andreyknvl@google.com: eliminate unnecessary branch in slab_free]
  Link: http://lkml.kernel.org/r/a62759a2545fddf69b0c034547212ca1eb1b3ce2.1520359686.git.andreyknvl@google.com
Link: http://lkml.kernel.org/r/083f58501e54731203801d899632d76175868e97.1519400992.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There was a regression report for "mm/cma: manage the memory of the CMA
area by using the ZONE_MOVABLE" [1] and I think that it is related to
this problem.  CMA patchset makes the system use one more zone
(ZONE_MOVABLE) and then increases min_free_kbytes.  It reduces usable
memory and it could cause regression.

ZONE_MOVABLE only has movable pages so we don't need to keep enough
freepages to avoid or deal with fragmentation.  So, don't count it.

This changes min_free_kbytes and thus min_watermark greatly if
ZONE_MOVABLE is used.  It will make the user uses more memory.

System:
  22GB ram, fakenuma, 2 nodes. 5 zones are used.

Before:
  min_free_kbytes: 112640

  zone_info (min_watermark):
  Node 0, zone      DMA
          min      19
  Node 0, zone    DMA32
          min      3778
  Node 0, zone   Normal
          min      10191
  Node 0, zone  Movable
          min      0
  Node 0, zone   Device
          min      0
  Node 1, zone      DMA
          min      0
  Node 1, zone    DMA32
          min      0
  Node 1, zone   Normal
          min      14043
  Node 1, zone  Movable
          min      127
  Node 1, zone   Device
          min      0

After:
  min_free_kbytes: 90112

  zone_info (min_watermark):
  Node 0, zone      DMA
          min      15
  Node 0, zone    DMA32
          min      3022
  Node 0, zone   Normal
          min      8152
  Node 0, zone  Movable
          min      0
  Node 0, zone   Device
          min      0
  Node 1, zone      DMA
          min      0
  Node 1, zone    DMA32
          min      0
  Node 1, zone   Normal
          min      11234
  Node 1, zone  Movable
          min      102
  Node 1, zone   Device
          min      0

[1] (lkml.kernel.org/r/20180102063528.GG30397%20()%20yexl-desktop)

Link: http://lkml.kernel.org/r/1522913236-15776-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

CMA area is now managed by the separate zone, ZONE_MOVABLE, to fix many
MM related problems.  In this implementation, if CONFIG_HIGHMEM = y,
then ZONE_MOVABLE is considered as HIGHMEM and the memory of the CMA
area is also considered as HIGHMEM.  That means that they are considered
as the page without direct mapping.  However, CMA area could be in a
lowmem and the memory could have direct mapping.

In ARM, when establishing a new mapping for DMA, direct mapping should
be cleared since two mapping with different cache policy could cause
unknown problem.  With this patch, PageHighmem() for the CMA memory
located in lowmem returns true so that the function for DMA mapping
cannot notice whether it needs to clear direct mapping or not,
correctly.  To handle this situation, this patch always clears direct
mapping for such CMA memory.

Link: http://lkml.kernel.org/r/1512114786-5085-4-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now, all reserved pages for CMA region are belong to the ZONE_MOVABLE
and it only serves for a request with GFP_HIGHMEM && GFP_MOVABLE.

Therefore, we don't need to maintain ALLOC_CMA at all.

Link: http://lkml.kernel.org/r/1512114786-5085-3-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/cma: manage the memory of the CMA area by using the
ZONE_MOVABLE", v2.

0. History

This patchset is the follow-up of the discussion about the "Introduce
ZONE_CMA (v7)" [1].  Please reference it if more information is needed.

1. What does this patch do?

This patch changes the management way for the memory of the CMA area in
the MM subsystem.  Currently the memory of the CMA area is managed by
the zone where their pfn is belong to.  However, this approach has some
problems since MM subsystem doesn't have enough logic to handle the
situation that different characteristic memories are in a single zone.
To solve this issue, this patch try to manage all the memory of the CMA
area by using the MOVABLE zone.  In MM subsystem's point of view,
characteristic of the memory on the MOVABLE zone and the memory of the
CMA area are the same.  So, managing the memory of the CMA area by using
the MOVABLE zone will not have any problem.

2. Motivation

There are some problems with current approach.  See following.  Although
these problem would not be inherent and it could be fixed without this
conception change, it requires many hooks addition in various code path
and it would be intrusive to core MM and would be really error-prone.
Therefore, I try to solve them with this new approach.  Anyway,
following is the problems of the current implementation.

o CMA memory utilization

First, following is the freepage calculation logic in MM.

 - For movable allocation: freepage = total freepage
 - For unmovable allocation: freepage = total freepage - CMA freepage

Freepages on the CMA area is used after the normal freepages in the zone
where the memory of the CMA area is belong to are exhausted.  At that
moment that the number of the normal freepages is zero, so

 - For movable allocation: freepage = total freepage = CMA freepage
 - For unmovable allocation: freepage = 0

If unmovable allocation comes at this moment, allocation request would
fail to pass the watermark check and reclaim is started.  After reclaim,
there would exist the normal freepages so freepages on the CMA areas
would not be used.

FYI, there is another attempt [2] trying to solve this problem in lkml.
And, as far as I know, Qualcomm also has out-of-tree solution for this
problem.

Useless reclaim:

There is no logic to distinguish CMA pages in the reclaim path.  Hence,
CMA page is reclaimed even if the system just needs the page that can be
usable for the kernel allocation.

Atomic allocation failure:

This is also related to the fallback allocation policy for the memory of
the CMA area.  Consider the situation that the number of the normal
freepages is *zero* since the bunch of the movable allocation requests
come.  Kswapd would not be woken up due to following freepage
calculation logic.

- For movable allocation: freepage = total freepage = CMA freepage

If atomic unmovable allocation request comes at this moment, it would
fails due to following logic.

- For unmovable allocation: freepage = total freepage - CMA freepage = 0

It was reported by Aneesh [3].

Useless compaction:

Usual high-order allocation request is unmovable allocation request and
it cannot be served from the memory of the CMA area.  In compaction,
migration scanner try to migrate the page in the CMA area and make
high-order page there.  As mentioned above, it cannot be usable for the
unmovable allocation request so it's just waste.

3. Current approach and new approach

Current approach is that the memory of the CMA area is managed by the
zone where their pfn is belong to.  However, these memory should be
distinguishable since they have a strong limitation.  So, they are
marked as MIGRATE_CMA in pageblock flag and handled specially.  However,
as mentioned in section 2, the MM subsystem doesn't have enough logic to
deal with this special pageblock so many problems raised.

New approach is that the memory of the CMA area is managed by the
MOVABLE zone.  MM already have enough logic to deal with special zone
like as HIGHMEM and MOVABLE zone.  So, managing the memory of the CMA
area by the MOVABLE zone just naturally work well because constraints
for the memory of the CMA area that the memory should always be
migratable is the same with the constraint for the MOVABLE zone.

There is one side-effect for the usability of the memory of the CMA
area.  The use of MOVABLE zone is only allowed for a request with
GFP_HIGHMEM && GFP_MOVABLE so now the memory of the CMA area is also
only allowed for this gfp flag.  Before this patchset, a request with
GFP_MOVABLE can use them.  IMO, It would not be a big issue since most
of GFP_MOVABLE request also has GFP_HIGHMEM flag.  For example, file
cache page and anonymous page.  However, file cache page for blockdev
file is an exception.  Request for it has no GFP_HIGHMEM flag.  There is
pros and cons on this exception.  In my experience, blockdev file cache
pages are one of the top reason that causes cma_alloc() to fail
temporarily.  So, we can get more guarantee of cma_alloc() success by
discarding this case.

Note that there is no change in admin POV since this patchset is just
for internal implementation change in MM subsystem.  Just one minor
difference for admin is that the memory stat for CMA area will be
printed in the MOVABLE zone.  That's all.

4. Result

Following is the experimental result related to utilization problem.

8 CPUs, 1024 MB, VIRTUAL MACHINE
make -j16

<Before>
  CMA area:               0 MB            512 MB
  Elapsed-time:           92.4		186.5
  pswpin:                 82		18647
  pswpout:                160		69839

<After>
  CMA        :            0 MB            512 MB
  Elapsed-time:           93.1		93.4
  pswpin:                 84		46
  pswpout:                183		92

akpm: "kernel test robot" reported a 26% improvement in
vm-scalability.throughput:
http://lkml.kernel.org/r/20180330012721.GA3845@yexl-desktop

[1]: lkml.kernel.org/r/1491880640-9944-1-git-send-email-iamjoonsoo.kim@lge.com
[2]: https://lkml.org/lkml/2014/10/15/623
[3]: http://www.spinics.net/lists/linux-mm/msg100562.html

Link: http://lkml.kernel.org/r/1512114786-5085-2-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NTony Lindgren <tony@atomide.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Freepage on ZONE_HIGHMEM doesn't work for kernel memory so it's not that
important to reserve.  When ZONE_MOVABLE is used, this problem would
theorectically cause to decrease usable memory for GFP_HIGHUSER_MOVABLE
allocation request which is mainly used for page cache and anon page
allocation.  So, fix it by setting 0 to
sysctl_lowmem_reserve_ratio[ZONE_HIGHMEM].

And, defining sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES - 1 size
makes code complex.  For example, if there is highmem system, following
reserve ratio is activated for *NORMAL ZONE* which would be easyily
misleading people.

 #ifdef CONFIG_HIGHMEM
 32
 #endif

This patch also fixes this situation by defining
sysctl_lowmem_reserve_ratio array by MAX_NR_ZONES and place "#ifdef" to
right place.

Link: http://lkml.kernel.org/r/1504672525-17915-1-git-send-email-iamjoonsoo.kim@lge.comSigned-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Tested-by: NTony Lindgren <tony@atomide.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Laura Abbott <lauraa@codeaurora.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <linux-api@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

THP migration is hacked into the generic migration with rather
surprising semantic.  The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate.  unmap_and_move then
fixes that up by spliting the THP into small pages while moving the head
page to the newly allocated order-0 page.  Remaning pages are moved to
the LRU list by split_huge_page.  The same happens if the THP allocation
fails.  This is really ugly and error prone [1].

I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated.  Some callers will just work
around that by retrying (e.g.  memory hotplug).  There are other pfn
walkers which are simply broken though.  e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior.  Page compaction doesn't try to migrate large
pages so it should be immune.

This patch tries to unclutter the situation by moving the special THP
handling up to the migrate_pages layer where it actually belongs.  We
simply split the THP page into the existing list if unmap_and_move fails
with ENOMEM and retry.  So we will _always_ migrate all THP subpages and
specific migrate_pages users do not have to deal with this case in a
special way.

[1] http://lkml.kernel.org/r/20171121021855.50525-1-zi.yan@sent.com

Link: http://lkml.kernel.org/r/20180103082555.14592-4-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NZi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No allocation callback is using this argument anymore.  new_page_node
used to use this parameter to convey node_id resp.  migration error up
to move_pages code (do_move_page_to_node_array).  The error status never
made it into the final status field and we have a better way to
communicate node id to the status field now.  All other allocation
callbacks simply ignored the argument so we can drop it finally.

[mhocko@suse.com: fix migration callback]
  Link: http://lkml.kernel.org/r/20180105085259.GH2801@dhcp22.suse.cz
[akpm@linux-foundation.org: fix alloc_misplaced_dst_page()]
[mhocko@kernel.org: fix build]
  Link: http://lkml.kernel.org/r/20180103091134.GB11319@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20180103082555.14592-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NZi Yan <zi.yan@cs.rutgers.edu>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "unclutter thp migration"

Motivation:

THP migration is hacked into the generic migration with rather
surprising semantic.  The migration allocation callback is supposed to
check whether the THP can be migrated at once and if that is not the
case then it allocates a simple page to migrate.  unmap_and_move then
fixes that up by splitting the THP into small pages while moving the
head page to the newly allocated order-0 page.  Remaining pages are
moved to the LRU list by split_huge_page.  The same happens if the THP
allocation fails.  This is really ugly and error prone [2].

I also believe that split_huge_page to the LRU lists is inherently wrong
because all tail pages are not migrated.  Some callers will just work
around that by retrying (e.g.  memory hotplug).  There are other pfn
walkers which are simply broken though.  e.g. madvise_inject_error will
migrate head and then advances next pfn by the huge page size.
do_move_page_to_node_array, queue_pages_range (migrate_pages, mbind),
will simply split the THP before migration if the THP migration is not
supported then falls back to single page migration but it doesn't handle
tail pages if the THP migration path is not able to allocate a fresh THP
so we end up with ENOMEM and fail the whole migration which is a
questionable behavior.  Page compaction doesn't try to migrate large
pages so it should be immune.

The first patch reworks do_pages_move which relies on a very ugly
calling semantic when the return status is pushed to the migration path
via private pointer.  It uses pre allocated fixed size batching to
achieve that.  We simply cannot do the same if a THP is to be split
during the migration path which is done in the patch 3.  Patch 2 is
follow up cleanup which removes the mentioned return status calling
convention ugliness.

On a side note:

There are some semantic issues I have encountered on the way when
working on patch 1 but I am not addressing them here.  E.g. trying to
move THP tail pages will result in either success or EBUSY (the later
one more likely once we isolate head from the LRU list).  Hugetlb
reports EACCESS on tail pages.  Some errors are reported via status
parameter but migration failures are not even though the original
`reason' argument suggests there was an intention to do so.  From a
quick look into git history this never worked.  I have tried to keep the
semantic unchanged.

Then there is a relatively minor thing that the page isolation might
fail because of pages not being on the LRU - e.g. because they are
sitting on the per-cpu LRU caches.  Easily fixable.

This patch (of 3):

do_pages_move is supposed to move user defined memory (an array of
addresses) to the user defined numa nodes (an array of nodes one for
each address).  The user provided status array then contains resulting
numa node for each address or an error.  The semantic of this function
is little bit confusing because only some errors are reported back.
Notably migrate_pages error is only reported via the return value.  This
patch doesn't try to address these semantic nuances but rather change
the underlying implementation.

Currently we are processing user input (which can be really large) in
batches which are stored to a temporarily allocated page.  Each address
is resolved to its struct page and stored to page_to_node structure
along with the requested target numa node.  The array of these
structures is then conveyed down the page migration path via private
argument.  new_page_node then finds the corresponding structure and
allocates the proper target page.

What is the problem with the current implementation and why to change
it? Apart from being quite ugly it also doesn't cope with unexpected
pages showing up on the migration list inside migrate_pages path.  That
doesn't happen currently but the follow up patch would like to make the
thp migration code more clear and that would need to split a THP into
the list for some cases.

How does the new implementation work? Well, instead of batching into a
fixed size array we simply batch all pages that should be migrated to
the same node and isolate all of them into a linked list which doesn't
require any additional storage.  This should work reasonably well
because page migration usually migrates larger ranges of memory to a
specific node.  So the common case should work equally well as the
current implementation.  Even if somebody constructs an input where the
target numa nodes would be interleaved we shouldn't see a large
performance impact because page migration alone doesn't really benefit
from batching.  mmap_sem batching for the lookup is quite questionable
and isolate_lru_page which would benefit from batching is not using it
even in the current implementation.

Link: http://lkml.kernel.org/r/20180103082555.14592-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NKirill A. Shutemov <kirill@shutemov.name>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Reale <ar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The pointer swap_avail_heads is local to the source and does not need to
be in global scope, so make it static.

Cleans up sparse warning:

  mm/swapfile.c:88:19: warning: symbol 'swap_avail_heads' was not declared. Should it be static?

Link: http://lkml.kernel.org/r/20180206215836.12366-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Acked-by: N"Huang, Ying" <ying.huang@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

syzbot has triggered a NULL ptr dereference when allocation fault
injection enforces a failure and alloc_mem_cgroup_per_node_info
initializes memcg->nodeinfo only half way through.

But __mem_cgroup_free still tries to free all per-node data and
dereferences pn->lruvec_stat_cpu unconditioanlly even if the specific
per-node data hasn't been initialized.

The bug is quite unlikely to hit because small allocations do not fail
and we would need quite some numa nodes to make struct
mem_cgroup_per_node large enough to cross the costly order.

Link: http://lkml.kernel.org/r/20180406100906.17790-1-mhocko@kernel.org
Reported-by: syzbot+8a5de3cce7cdc70e9ebe@syzkaller.appspotmail.com
Fixes: 00f3ca2c ("mm: memcontrol: per-lruvec stats infrastructure")
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Calling swapon() on a zero length swap file on SSD can lead to a
divide-by-zero.

Although creating such files isn't possible with mkswap and they woud be
considered invalid, it would be better for the swapon code to be more
robust and handle this condition gracefully (return -EINVAL).
Especially since the fix is small and straightforward.

To help with wear leveling on SSD, the swapon syscall calculates a
random position in the swap file using modulo p->highest_bit, which is
set to maxpages - 1 in read_swap_header.

If the swap file is zero length, read_swap_header sets maxpages=1 and
last_page=0, resulting in p->highest_bit=0 and we divide-by-zero when we
modulo p->highest_bit in swapon syscall.

This can be prevented by having read_swap_header return zero if
last_page is zero.

Link: http://lkml.kernel.org/r/5AC747C1020000A7001FA82C@prv-mh.provo.novell.comSigned-off-by: NThomas Abraham <tabraham@suse.com>
Reported-by: <Mark.Landis@Teradata.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit a983b5eb ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.

For memory.stat this is acceptable.  But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.

Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.

This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters.  That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.

[hannes@cmpxchg.org: "array subscript is above array bounds"]
  Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes: a983b5eb ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reported-by: NTejun Heo <tj@kernel.org>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When using KSM with use_zero_pages, we replace anonymous pages
containing only zeroes with actual zero pages, which are not anonymous.
We need to do proper accounting of the mm counters, otherwise we will
get wrong values in /proc and a BUG message in dmesg when tearing down
the mm.

Link: http://lkml.kernel.org/r/1522931274-15552-1-git-send-email-imbrenda@linux.vnet.ibm.com
Fixes: e86c59b1 ("mm/ksm: improve deduplication of zero pages with colouring")
Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We have a perfectly good macro to determine whether the gfp flags allow
you to sleep or not; use it instead of trying to infer it.

Link: http://lkml.kernel.org/r/20180408062206.GC16007@bombadil.infradead.orgSigned-off-by: NMatthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In z3fold_create_pool(), the memory allocated by __alloc_percpu() is not
released on the error path that pool->compact_wq , which holds the
return value of create_singlethread_workqueue(), is NULL.  This will
result in a memory leak bug.

[akpm@linux-foundation.org: fix oops on kzalloc() failure, check __alloc_percpu() retval]
Link: http://lkml.kernel.org/r/1522803111-29209-1-git-send-email-wangxidong_97@163.comSigned-off-by: NXidong Wang <wangxidong_97@163.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A THP memcg charge can trigger the oom killer since 25160354 ("mm,
thp: remove __GFP_NORETRY from khugepaged and madvised allocations").
We have used an explicit __GFP_NORETRY previously which ruled the OOM
killer automagically.

Memcg charge path should be semantically compliant with the allocation
path and that means that if we do not trigger the OOM killer for costly
orders which should do the same in the memcg charge path as well.
Otherwise we are forcing callers to distinguish the two and use
different gfp masks which is both non-intuitive and bug prone.  As soon
as we get a costly high order kmalloc user we even do not have any means
to tell the memcg specific gfp mask to prevent from OOM because the
charging is deep within guts of the slab allocator.

The unexpected memcg OOM on THP has already been fixed upstream by
9d3c3354 ("mm, thp: do not cause memcg oom for thp") but this is a
one-off fix rather than a generic solution.  Teach mem_cgroup_oom to
bail out on costly order requests to fix the THP issue as well as any
other costly OOM eligible allocations to be added in future.

Also revert 9d3c3354 because special gfp for THP is no longer
needed.

Link: http://lkml.kernel.org/r/20180403193129.22146-1-mhocko@kernel.org
Fixes: 25160354 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations")
Signed-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use of pte_write(pte) is only valid for present pte, the common code
which set the migration entry can be reach for both valid present pte
and special swap entry (for device memory).  Fix the code to use the
mpfn value which properly handle both cases.

On x86 this did not have any bad side effect because pte write bit is
below PAGE_BIT_GLOBAL and thus special swap entry have it set to 0 which
in turn means we were always creating read only special migration entry.

So once migration did finish we always write protected the CPU page
table entry (moreover this is only an issue when migrating from device
memory to system memory).  End effect is that CPU write access would
fault again and restore write permission.

This behaviour isn't too bad; it just burns CPU cycles by forcing CPU to
take a second fault on write access. ie, double faulting the same
address.  There is no corruption or incorrect states (it behaves as a
COWed page from a fork with a mapcount of 1).

Link: http://lkml.kernel.org/r/20180402023506.12180-1-jglisse@redhat.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__highest_present_section_nr is a more strict boundary than
NR_MEM_SECTIONS.  So checking __highest_present_section_nr directly is
enough.

Link: http://lkml.kernel.org/r/20180330032044.21647-1-richard.weiyang@gmail.comSigned-off-by: NWei Yang <richard.weiyang@gmail.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

change_pte_range is called from task work context to mark PTEs for
receiving NUMA faulting hints.  If the marked pages are dirty then
migration may fail.  Some filesystems cannot migrate dirty pages without
blocking so are skipped in MIGRATE_ASYNC mode which just wastes CPU.
Even when they can, it can be a waste of cycles when the pages are
shared forcing higher scan rates.  This patch avoids marking shared
dirty pages for hinting faults but also will skip a migration if the
page was dirtied after the scanner updated a clean page.

This is most noticeable running the NASA Parallel Benchmark when backed
by btrfs, the default root filesystem for some distributions, but also
noticeable when using XFS.

The following are results from a 4-socket machine running a 4.16-rc4
kernel with some scheduler patches that are pending for the next merge
window.

                        4.16.0-rc4             4.16.0-rc4
                 schedtip-20180309          nodirty-v1
  Time cg.D      459.07 (   0.00%)      444.21 (   3.24%)
  Time ep.D       76.96 (   0.00%)       77.69 (  -0.95%)
  Time is.D       25.55 (   0.00%)       27.85 (  -9.00%)
  Time lu.D      601.58 (   0.00%)      596.87 (   0.78%)
  Time mg.D      107.73 (   0.00%)      108.22 (  -0.45%)

is.D regresses slightly in terms of absolute time but note that that
particular load varies quite a bit from run to run.  The more relevant
observation is the total system CPU usage.

            4.16.0-rc4  4.16.0-rc4
          schedtip-20180309 nodirty-v1
  User        71471.91    70627.04
  System      11078.96     8256.13
  Elapsed       661.66      632.74

That is a substantial drop in system CPU usage and overall the workload
completes faster.  The NUMA balancing statistics are also interesting

  NUMA base PTE updates        111407972   139848884
  NUMA huge PMD updates           206506      264869
  NUMA page range updates      217139044   275461812
  NUMA hint faults               4300924     3719784
  NUMA hint local faults         3012539     3416618
  NUMA hint local percent             70          91
  NUMA pages migrated            1517487     1358420

While more PTEs are scanned due to changes in what faults are gathered,
it's clear that a far higher percentage of faults are local as the bulk
of the remote hits were dirty pages that, in this case with btrfs, had
no chance of migrating.

The following is a comparison when using XFS as that is a more realistic
filesystem choice for a data partition

                        4.16.0-rc4             4.16.0-rc4
                 schedtip-20180309          nodirty-v1r47
  Time cg.D      485.28 (   0.00%)      442.62 (   8.79%)
  Time ep.D       77.68 (   0.00%)       77.54 (   0.18%)
  Time is.D       26.44 (   0.00%)       24.79 (   6.24%)
  Time lu.D      597.46 (   0.00%)      597.11 (   0.06%)
  Time mg.D      142.65 (   0.00%)      105.83 (  25.81%)

That is a reasonable gain on two relatively long-lived workloads.  While
not presented, there is also a substantial drop in system CPu usage and
the NUMA balancing stats show similar improvements in locality as btrfs
did.

Link: http://lkml.kernel.org/r/20180326094334.zserdec62gwmmfqf@techsingularity.netSigned-off-by: NMel Gorman <mgorman@techsingularity.net>
Reviewed-by: NRik van Riel <riel@surriel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fix typos and syntaxes, thanks to Randy Dunlap for pointing them out
(they were all my faults).

Link: http://lkml.kernel.org/r/20180409151859.4713-1-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NRalph Campbell <rcampbell@nvidia.com>
Reviewed-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The last fix was still wrong, as we need the inline dummy functions also
for the case that CONFIG_HMM is enabled but CONFIG_HMM_MIRROR is not:

  kernel/fork.o: In function `__mmdrop':
  fork.c:(.text+0x14f6): undefined reference to `hmm_mm_destroy'

This adds back the second copy of the dummy functions, hopefully
this time in the right place.

Link: http://lkml.kernel.org/r/20180404110236.804484-1-arnd@arndb.de
Fixes: 8900d06a277a ("mm/hmm: fix header file if/else/endif maze")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hmm_devmem_find() requires rcu_read_lock_held() but there's nothing which
actually uses the RCU protection.  The only caller is
hmm_devmem_pages_create() which already grabs the mutex and does
superfluous rcu_read_lock/unlock() around the function.

This doesn't add anything and just adds to confusion.  Remove the RCU
protection and open-code the radix tree lookup.  If this needs to become
more sophisticated in the future, let's add them back when necessary.

Link: http://lkml.kernel.org/r/20180314194515.1661824-4-tj@kernel.orgSigned-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Users of hmm_vma_fault() and hmm_vma_get_pfns() provide a flags array and
pfn shift value allowing them to define their own encoding for HMM pfn
that are fill inside the pfns array of the hmm_range struct.  With this
device driver can get pfn that match their own private encoding out of HMM
without having to do any conversion.

[rcampbell@nvidia.com: don't ignore specific pte fault flag in hmm_vma_fault()]
  Link: http://lkml.kernel.org/r/20180326213009.2460-2-jglisse@redhat.com
[rcampbell@nvidia.com: clarify fault logic for device private memory]
  Link: http://lkml.kernel.org/r/20180326213009.2460-3-jglisse@redhat.com
Link: http://lkml.kernel.org/r/20180323005527.758-16-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Signed-off-by: NRalph Campbell <rcampbell@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This changes hmm_vma_fault() to not take a global write fault flag for a
range but instead rely on caller to populate HMM pfns array with proper
fault flag ie HMM_PFN_VALID if driver want read fault for that address or
HMM_PFN_VALID and HMM_PFN_WRITE for write.

Moreover by setting HMM_PFN_DEVICE_PRIVATE the device driver can ask for
device private memory to be migrated back to system memory through page
fault.

This is more flexible API and it better reflects how device handles and
reports fault.

Link: http://lkml.kernel.org/r/20180323005527.758-15-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No functional change, just create one function to handle pmd and one to
handle pte (hmm_vma_handle_pmd() and hmm_vma_handle_pte()).

Link: http://lkml.kernel.org/r/20180323005527.758-14-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move hmm_pfns_clear() closer to where it is used to make it clear it is
not use by page table walkers.

Link: http://lkml.kernel.org/r/20180323005527.758-13-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Make naming consistent across code, DEVICE_PRIVATE is the name use outside
HMM code so use that one.

Link: http://lkml.kernel.org/r/20180323005527.758-12-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is no point in differentiating between a range for which there is
not even a directory (and thus entries) and empty entry (pte_none() or
pmd_none() returns true).

Simply drop the distinction ie remove HMM_PFN_EMPTY flag and merge now
duplicate hmm_vma_walk_hole() and hmm_vma_walk_clear() functions.

Link: http://lkml.kernel.org/r/20180323005527.758-11-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Special vma (one with any of the VM_SPECIAL flags) can not be access by
device because there is no consistent model across device drivers on those
vma and their backing memory.

This patch directly use hmm_range struct for hmm_pfns_special() argument
as it is always affecting the whole vma and thus the whole range.

It also make behavior consistent after this patch both hmm_vma_fault() and
hmm_vma_get_pfns() returns -EINVAL when facing such vma.  Previously
hmm_vma_fault() returned 0 and hmm_vma_get_pfns() return -EINVAL but both
were filling the HMM pfn array with special entry.

Link: http://lkml.kernel.org/r/20180323005527.758-10-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All device driver we care about are using 64bits page table entry.  In
order to match this and to avoid useless define convert all HMM pfn to
directly use uint64_t.  It is a first step on the road to allow driver to
directly use pfn value return by HMM (saving memory and CPU cycles use for
conversion between the two).

Link: http://lkml.kernel.org/r/20180323005527.758-9-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Only peculiar architecture allow write without read thus assume that any
valid pfn do allow for read.  Note we do not care for write only because
it does make sense with thing like atomic compare and exchange or any
other operations that allow you to get the memory value through them.

Link: http://lkml.kernel.org/r/20180323005527.758-8-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Both hmm_vma_fault() and hmm_vma_get_pfns() were taking a hmm_range struct
as parameter and were initializing that struct with others of their
parameters.  Have caller of those function do this as they are likely to
already do and only pass this struct to both function this shorten
function signature and make it easier in the future to add new parameters
by simply adding them to the structure.

Link: http://lkml.kernel.org/r/20180323005527.758-7-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The private field of mm_walk struct point to an hmm_vma_walk struct and
not to the hmm_range struct desired.  Fix to get proper struct pointer.

Link: http://lkml.kernel.org/r/20180323005527.758-6-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This code was lost in translation at one point.  This properly call
mmu_notifier_unregister_no_release() once last user is gone.  This fix the
zombie mm_struct as without this patch we do not drop the refcount we have
on it.

Link: http://lkml.kernel.org/r/20180323005527.758-5-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

hmm_mirror_register() registers a callback for when the CPU pagetable is
modified.  Normally, the device driver will call hmm_mirror_unregister()
when the process using the device is finished.  However, if the process
exits uncleanly, the struct_mm can be destroyed with no warning to the
device driver.

Link: http://lkml.kernel.org/r/20180323005527.758-4-jglisse@redhat.comSigned-off-by: NRalph Campbell <rcampbell@nvidia.com>
Signed-off-by: NJérôme Glisse <jglisse@redhat.com>
Reviewed-by: NJohn Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: Mark Hairgrove <mhairgrove@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The #if/#else/#endif for IS_ENABLED(CONFIG_HMM) were wrong.  Because of
this after multiple include there was multiple definition of both
hmm_mm_init() and hmm_mm_destroy() leading to build failure if HMM was
enabled (CONFIG_HMM set).

Link: http://lkml.kernel.org/r/20180323005527.758-3-jglisse@redhat.comSigned-off-by: NJérôme Glisse <jglisse@redhat.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Evgeny Baskakov <ebaskakov@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>