Allow userspace to issue a netlink query against the ib_device for
something like "uverbs" and get back the char dev name, inode major/minor,
and interface ABI information for "uverbs0".

Since we are now in netlink this can also trigger a module autoload to
make the uverbs device come into existence.

Largely this will let us replace searching and reading inside sysfs to
setup devices, and provides an alternative (using driver_id) to device
name based provider binding for things like rxe.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This enum is exposed over the sysfs file 'node_type' and over netlink via
RDMA_NLDEV_ATTR_DEV_NODE_TYPE, so declare it in the uapi headers.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This driver was first merged over 10 years ago and has not seen major
activity by the authors in the last 7 years. However, in that time it has
been patched 150 times to adapt it to changing kernel APIs.

Further, the hardware has several issues, like not supporting 64 bit DMA,
that make it rather uninteresting for use with modern systems and RDMA.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The default action for unlisted tests is "not-supported", so given that
ipoib doesn't support ETH_SS_TEST, there is no need to check for it
in the case statements, just let it get caught by the default: case.

Fixes: e3614bc9 ("IB/ipoib: Add readout of statistics using ethtool")
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Ensure that CQ is allocated and freed by IB/core and not by drivers.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NGal Pressman <galpress@amazon.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Tested-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Like all other destroy commands, .destroy_cq() call is not supposed
to fail. In all flows, the attempt to return earlier caused to memory
leaks.

This patch converts .destroy_cq() to do not return any errors.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Acked-by: NGal Pressman <galpress@amazon.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The memory allocation call can fail and cause to early return
from nes_desotroy_cq() function. This situation will cause to
memory leak of struct nes_cq. Rewrite function to avoid memory
allocation.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This more closely follows how other subsytems work, with owner being a
member of the structure containing the function pointers.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

No reason for every driver to emit code to set this, just make it part of
the driver's existing static const ops structure.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This has been marked CONFIG_BROKEN for over a year now with no complaints.
Delete the whole thing for good.

The module provided the /dev/infiniband/ucmX interface.
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When user post recv a srq with multiple sges, the hardware will get the
last correct sge and count the sge numbers according to the specific
identifier with lkey. For example, when the driver fills the sges with
every wr less than the max sge that the user configured when creating srq,
the hardware will stop getting the sge according to the specific lkey in
the sge. However, it will always end with the first sge in the current
post srq recv interface implementation.

Fixes: c7bcb134 ("RDMA/hns: Add SRQ support for hip08 kernel mode")
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A previous change incorrectly changed the inverted logic and logically
negated the readl rather than the shifted readl result. Fix this by
adding in missing parentheses around the expression that needs to be
logically negated.

Addresses-Coverity: ("Logically dead code")
Fixes: 669cefb6 ("RDMA/hns: Remove jiffies operation in disable interrupt context")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The function srp_parse_in() is used both for parsing source address
specifications and for target address specifications. Target addresses
must have a port number. Having to specify a port number for source
addresses is inconvenient. Make sure that srp_parse_in() supports again
parsing addresses with no port number.

Cc: <stable@vger.kernel.org>
Fixes: c62adb7d ("IB/srp: Fix IPv6 address parsing")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for reporting link state for ipoib net devices.

$ ip l set dev mlx4_ib0 up
$ ethtool mlx4_ib0 | grep Link
	Link detected: yes
$ ip l set dev mlx4_ib0 down
$ ethtool mlx4_ib0 | grep Link
	Link detected: no
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When the user submits more than 32 work request to a srq queue
at a time, it needs to find the corresponding number of entries
in the bitmap in the idx queue. However, the original lookup
function named ffs only processes 32 bits of the array element,
When the number of srq wqe issued exceeds 32, the ffs will only
process the lower 32 bits of the elements, it will not be able
to get the correct wqe index for srq wqe.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

If the kzalloc() fails then we should return ERR_PTR(-ENOMEM).  In the
current code it's possible that the kzalloc() fails and the
radix_tree_insert() inserts the NULL pointer successfully and we return
the NULL "elm" pointer to the caller.  That results in a NULL pointer
dereference.

Fixes: 9ed3e5f4 ("IB/uverbs: Build the specs into a radix tree at runtime")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

sizeof(struct opa_port_status_rsp) + num_vls * sizeof(struct _vls_pctrs)

with:

struct_size(rsp, vls, num_vls)

and so on...

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

sizeof(*pkt) + sizeof(pkt->addr[0])*n

with:

struct_size(pkt, addr, n)

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

sizeof(struct rvt_sge) * init_attr->cap.max_send_sge + sizeof(struct rvt_swqe)

with:

struct_size(swq, sg_list, init_attr->cap.max_send_sge)

and so on...

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove leftover includes that are no longer used from the driver.
Reviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When creating the chunks list the rdma_for_each_block() iterator is used
in order to iterate over the payload in EFA_CHUNK_PAYLOAD_SIZE (device
defined) strides.
Reviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Reviewed-by: NShiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The admin commands abort flow is buggy (use-after-free) and not really
necessary as it is guaranteed that after ib_unregister_device() is called
there are no user verbs threads running in parallel, delete it.
Suggested-by: NJason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use kvzalloc which attempts to allocate a physically continuous buffer and
fallbacks to virtually continuous on failure instead of open coding it in
the driver.

The is_vmalloc_addr function is used to determine whether the buffer is
physically continuous or not (which determines direct vs indirect MR
registration mode).
Suggested-by: NJason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A recent patch to hfi1 left behind a checkpatch error.

Fixes: fb24ea52 ("drivers: Remove explicit invocations of mmiowb()")
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

For infiniband code that retains pages via get_user_pages*(), release
those pages via the new put_user_page(), or put_user_pages*(), instead of
put_page()

This is a tiny part of the second step of fixing the problem described in
[1]. The steps are:

1) Provide put_user_page*() routines, intended to be used for releasing
   pages that were pinned via get_user_pages*().

2) Convert all of the call sites for get_user_pages*(), to invoke
   put_user_page*(), instead of put_page(). This involves dozens of call
   sites, and will take some time.

3) After (2) is complete, use get_user_pages*() and put_user_page*() to
   implement tracking of these pages. This tracking will be separate from
   the existing struct page refcounting.

4) Use the tracking and identification of these pages, to implement
   special handling (especially in writeback paths) when the pages are
   backed by a filesystem. Again, [1] provides details as to why that is
   desirable.

[1] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()"
Reviewed-by: NJan Kara <jack@suse.cz>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NJérôme Glisse <jglisse@redhat.com>
Acked-by: NJason Gunthorpe <jgg@mellanox.com>
Tested-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NJohn Hubbard <jhubbard@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hfi1/tid_rdma.c: In function tid_rdma_rcv_error:
drivers/infiniband/hw/hfi1/tid_rdma.c:2029:7: warning: variable offset set but not used [-Wunused-but-set-variable]
drivers/infiniband/hw/hfi1/tid_rdma.c: In function hfi1_rc_rcv_tid_rdma_ack:
drivers/infiniband/hw/hfi1/tid_rdma.c:4555:35: warning: variable fspsn set but not used [-Wunused-but-set-variable]

'offset' is never used since introduction in
commit d0d564a1 ("IB/hfi1: Add functions to receive TID RDMA READ request")

'fspsn' is never used since introduciotn in
commit 9e93e967 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This patch makes the code more readable by removing magic numbers.
Signed-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In some functions, the jiffies operation is unnecessary, and we can
control delay using mdelay and udelay functions only.  Especially, in
hns_roce_v1_clear_hem, the function calls spin_lock_irqsave, the context
disables interrupt, so we can not use jiffies and msleep functions.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When hip08 set gid, it will call spin_unlock_bh when send cmq.  if main.ko
call spin_lock_irqsave firstly, and the kernel is before commit
f71b74bc ("irq/softirqs: Use lockdep to assert IRQs are
disabled/enabled"), it will cause WARN_ON_ONCE because of calling
spin_unlock_bh in disable context.

In fact, the spin_lock_irqsave in main.ko is only used for hip06, and
should be placed in hns_roce_hw_v1.c. hns_roce_hw_v2.c uses its own
spin_unlock_bh and does not need main.ko manage spin_lock.
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

According to hip08 UM, the maximum number of CQEs supported by each CQ is
4M.
Signed-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is no need to print when communication is established, especially
while lots of qp used by application.
Signed-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add await in destroy_qp() so that all references to qp are dereferenced
and qp is freed in destroy_qp() itself.  This ensures freeing of all QPs
before invocation of dealloc_ucontext(), which prevents loss of in use
qpids stored in the ucontext.
Signed-off-by: NNirranjan Kirubaharan <nirranjan@chelsio.com>
Reviewed-by: NPotnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Change unconditional print of DMA address to be printed with special
printk format type specifier.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Convert various sizeof call sites to be written in standard format
sizeof().
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Resize CQ implementation was guarded by undeclared "notyet" define while
cxgb3 was added to the kernel. Twelve years later, this call is still
unimplemented, so safely delete it and fix improper return error code when
.resize_cq() is not implemented.

Fixes: b038ced7 ("RDMA/cxgb3: Add driver for Chelsio T3 RNIC")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

DMA addresses like all other kernel addresses should be printed with
special %p* formatter. It is needed to allow control of exposure of such
information through a dedicated knob.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>