- 22 6月, 2015 12 次提交
-
-
由 Jonas Gorski 提交于
Build all available dtbs to allow them to be appended to the resulting kernel in case there is no builtin dtb. Signed-off-by: NJonas Gorski <jogo@openwrt.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: John Crispin <blogic@openwrt.org> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: James Hartley <James.Hartley@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/9740/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Alban Bedel 提交于
Add a DTS for TL-WR1043ND version 1 and allow to have it built in the kernel to circumvent the broken u-boot found on these boards. Currently only the UART, LEDs and buttons are supported. Signed-off-by: NAlban Bedel <albeu@free.fr> Cc: linux-mips@linux-mips.org Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Jaedon Shin 提交于
Add two uart device nodes known as the uart1 and uart2 for the bcm7xxx platforms. Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9991/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
Add a DTS file and Kconfig entry for the BCM97435SVMB evaluation board using bcm7435.dtsi as an example. The current code needs some tweaking to allow us to use the dual-threaded dual BMIPS5200 CPUs, so for now we limit ourselves to allowing just a single CPU to be booted. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: cernekee@chromium.org Cc: Steven.Hill@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/9972/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Florian Fainelli 提交于
Add the bare minimum required to boot a BCM7435-based system: - BMIPS5200 CPU nodes - Level 1 and 2 interrupt controllers - UARTs - EHCI/OHCI controllers Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: cernekee@chromium.org Cc: Steven.Hill@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/9971/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Add an initial device tree for the Ingenic JZ4780 based MIPS Creator CI20 board. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10162/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Support the Ingenic JZ4780 SoC using the existing code under arch/mips/jz4740 now that it has been generalised sufficiently. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Joshua Kinard <kumba@gentoo.org> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/10164/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Remove the serial support from arch/mips/jz4740 & make use of the new Ingenic SoC UART driver. This is done for both regular & early console output. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Cc: Apelete Seketeli <apelete@seketeli.net> Cc: Alexandre Courbot <gnurou@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10160/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Migrate the JZ4740 & the qi_lb60 board to use common clock framework via the new Ingenic SoC CGU driver. Note that the JZ4740-specific debugfs code is removed since common clock framework provides its own debug capabilities. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Co-authored-by: NPaul Cercueil <paul@crapouillou.net> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: devicetree@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Fabian Frederick <fabf@skynet.be> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10151/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Declare the JZ4740 interrupt controller for probe via DT using the standard irqchip_init function, and make use of that function to probe the controller by adding the appropriate node to the JZ4740 dtsi. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10135/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Use the generic irqchip_init function to probe irqchip drivers using DT, and add the appropriate node to the JZ4740 devicetree in place of the call to mips_cpu_irq_init. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Patchwork: https://patchwork.linux-mips.org/patch/10166/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Paul Burton 提交于
Require a DT for JZ4740 based systems, and add a stub one for the qi_lb60 (Ben NanoNote) board. Devices will be migrated to being probed via this DT over time. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Andrew Bresticker <abrestic@chromium.org> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10132/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 01 4月, 2015 6 次提交
-
-
由 Aaro Koskinen 提交于
DSR-1000N board has two GPIO LEDs next to USB ports. Add support for them. [ralf@linux-mips.org: Resolved conflict due to the moving of the DTS files into vendor subdirectories.] Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9624/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ganesan Ramalingam 提交于
Signed-off-by: NGanesan Ramalingam <ganesanr@broadcom.com> Signed-off-by: NJayachandran C <jchandra@broadcom.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/8896/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin Cernekee 提交于
Most of the supported chips use legacy (non-DT) bootloaders, so they will need to select an appropriate builtin DTB at compile time until the bootloader is updated. Provide suitable DTS files, and a means to compile one of them into the kernel image. Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Signed-off-by: NJaedon Shin <jaedon.shin@gmail.com> Cc: f.fainelli@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8858/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin Cernekee 提交于
The DT bindings for this platform have changed as the bootloader and product requirements evolved. In particular, there are both Linux-on-Zephyr and Linux-on-Viper configurations. Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8856/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Kevin Cernekee 提交于
This platform is configured primarily through device tree, and we can reuse the same code to support a bunch of other chips. Change the name to reflect this. [ralf@linux-mips.org: Fix conflicts with other patches.] Signed-off-by: NKevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8838/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
Move the MIPS device-trees into the appropriate vendor sub-directories. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Tested-by: NKevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8835/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 24 11月, 2014 1 次提交
-
-
由 Kevin Cernekee 提交于
This supports SMP Linux running on the BCM3384 Zephyr (BMIPS5000) application processor, with fully functional UART and USB 1.1/2.0. Device Tree is used to configure the following items: - All peripherals - Early console base address - SMP or UP mode - MIPS counter frequency - Memory size / regions - DMA offset - Kernel command line The DT-enabled bootloader and build instructions are posted at https://github.com/Broadcom/aeolusSigned-off-by: NKevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: mbizon@freebox.fr Cc: jogo@openwrt.org Cc: jfraser@broadcom.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8170/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 22 9月, 2014 7 次提交
-
-
由 Andrew Bresticker 提交于
Move the Ralink device-trees to arch/mips/boot/dts/ and update the Makefiles accordingly. A built-in device-tree is optional, so select BUILTIN_DTB when it is requested. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7561/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
Move the Netlogic XLP device-trees to arch/mips/boot/dts/ and update the Makefiles accordingly. A built-in device-tree is optional, so select BUILTIN_DTB when it is requested. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7560/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
Move the SEAD-3 device-tree to arch/mips/boot/dts/ and update the Makefiles accordingly. Since SEAD-3 requires the device-tree to be built into the kernel, select BUILTIN_DTB when building for SEAD-3. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7555/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
Move the Lantiq device-trees to arch/mips/boot/dts/ and update the Makefiles accordingly. There is currently only a single Lantiq device-tree (EASY50712), and it's required to be built into the kernel, so select BUILTIN_DTB for it. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7559/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
Move the Octeon device-trees to arch/mips/boot/dts/ and update the Makefiles accordingly. Since Octeon requires the device-tree to be built into the kernel, select BUILTIN_DTB as well. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7556/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
Add a 'dtbs' Makefile target that just builds the device-tree binaries enabled by the configuration. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7557/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Andrew Bresticker 提交于
In preparation for moving the device-trees to a common location, introduce the config option BUILTIN_DTB, which can be selected by platforms that use a device-tree built into the kernel image, and create a Makefile to build the device-trees in arch/mips/boot/dts/. Signed-off-by: NAndrew Bresticker <abrestic@chromium.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <blogic@openwrt.org> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7564/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 19 9月, 2013 1 次提交
-
-
由 Madhavan Srinivasan 提交于
Commit 3b29aa5b [MIPS: add <dt-bindings/> symlink] created a symlink file in include/dt-bindings. Even though commit diff is fine, the symlink is invalid and ls -lb shows a newline character at the end of the filename: lrwxrwxrwx 1 maddy maddy 35 Sep 19 18:11 dt-bindings -> ../../../../../include/dt-bindings\n Signed-off-by: NMadhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: steven.hill@imgtec.com Cc: mmarek@suse.cz Cc: swarren@nvidia.com Cc: linux-mips@linux-mips.org Cc: linux-kbuild@vger.kernel.org Cc: james.hogan@imgtec.com Patchwork: https://patchwork.linux-mips.org/patch/5859/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 9月, 2013 1 次提交
-
-
由 James Hogan 提交于
Add symlink to include/dt-bindings from arch/mips/boot/dts/include/ to match the ones in ARM and Meta architectures so that preprocessed device tree files can include various useful constant definitions. See commit c58299aa (kbuild: create an "include chroot" for DT bindings) merged in v3.10-rc1 for details. MIPS structures it's dts files a little differently to other architectures, having a separate dts directory for each SoC/platform, but most of the definitions in the dt-bindings/ directory are common so for now lets just have a single "include chroot" for all MIPS platforms. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Reviewed-by: NSteven. J. Hill <steven.hill@imgtec.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Acked-by: NStephen Warren <swarren@nvidia.com> Patchwork: http://patchwork.linux-mips.org/patch/5745/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-