- 24 4月, 2016 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull locking fixes from Ingo Molnar: "Misc fixes: pvqspinlocks: - an instrumentation fix futexes: - preempt-count vs pagefault_disable decouple corner case fix - futex requeue plist race window fix - futex UNLOCK_PI transaction fix for a corner case" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: asm-generic/futex: Re-enable preemption in futex_atomic_cmpxchg_inatomic() futex: Acknowledge a new waiter in counter before plist futex: Handle unlock_pi race gracefully locking/pvqspinlock: Fix division by zero in qstat_read()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull irq fixes from Ingo Molnar: "A core irq affinity masks related fix and a MIPS irqchip driver fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips-gic: Don't overrun pcpu_masks array genirq: Dont allow affinity mask to be updated on IPIs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull objtool fixes from Ingo Molnar: "A handful of objtool fixes: two improvements to how warnings are printed plus a false positive warning fix, and build environment fix" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix Makefile to properly see if libelf is supported objtool: Detect falling through to the next function objtool: Add workaround for GCC switch jump table bug
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb由 Linus Torvalds 提交于
Pull USB / PHY driver fixes from Greg KH: "Here are two small sets of patches, both from subsystem trees, USB gadget and PHY drivers. Full details are in the shortlog, and they have all been in linux-next for a while (before I merged them to the USB tree)" * tag 'usb-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: f_fs: Fix use-after-free usb: dwc3: gadget: Fix suspend/resume during device mode usb: dwc3: fix memory leak of dwc->regset usb: dwc3: core: fix PHY handling during suspend usb: dwc3: omap: fix up error path on probe() usb: gadget: composite: Clear reserved fields of SSP Dev Cap phy: rockchip-emmc: adapt binding to specifiy register offset and length phy: rockchip-emmc: should be a child device of the GRF phy: rockchip-dp: should be a child device of the GRF
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty由 Linus Torvalds 提交于
Pull serial fixes from Greg KH: "Here are 3 serial driver fixes for issues that have been reported. Two are reverts, fixing problems that were in the big TTY/Serial driver merge in 4.6-rc1, and the last one is a simple bugfix for a regression that showed up in 4.6-rc1 as well. All have been in linux-next with no reported issues" * tag 'tty-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "serial: 8250: Add hardware dependency to RT288X option" tty/serial/8250: fix RS485 half-duplex RX Revert "serial-uartlite: Constify uartlite_be/uartlite_le"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
Pull input subsystem fixes from Dmitry Torokhov: "Just minor driver fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: twl4030-vibra - do not reparent to grandparent Input: twl6040-vibra - do not reparent to grandparent Input: twl6040-vibra - ignore return value of schedule_work Input: twl6040-vibra - fix NULL pointer dereference by removing workqueue Input: pmic8xxx-pwrkey - fix algorithm for converting trigger delay Input: arizona-haptic - don't assign input_dev parent Input: clarify we want BTN_TOOL_<name> on proximity Input: xpad - add Mad Catz FightStick TE 2 VID/PID Input: gtco - fix crash on detecting device without endpoints
-
- 23 4月, 2016 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "Some pin control driver fixes came in. One headed for stable and the other two are just ordinary merge window fixes. - Make the i.MX driver select REGMAP as a dependency - Fix up the Mediatek debounce time unit - Fix a real hairy ffs vs __ffs issue in the Single pinctrl driver" * tag 'pinctrl-v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: single: Fix pcs_parse_bits_in_pinctrl_entry to use __ffs than ffs pinctrl: mediatek: correct debounce time unit in mtk_gpio_set_debounce pinctrl: imx: Kconfig: PINCTRL_IMX select REGMAP
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull arm64 fixes from Catalin Marinas: - Cache invalidation fix for early CPU boot status update (incorrect cacheline) - of_put_node() missing in the spin_table code - EL1/El2 early init inconsistency when Virtualisation Host Extensions are present - RCU warning fix in the arm_pmu.c driver * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Fix EL1/EL2 early init inconsistencies with VHE drivers/perf: arm-pmu: fix RCU usage on pmu resume from low-power arm64: spin-table: add missing of_node_put() arm64: fix invalidation of wrong __early_cpu_boot_status cacheline
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Michael Ellerman: "Three powerpc cpu feature fixes from Anton Blanchard: - scan_features() updated incorrect bits for REAL_LE - update cpu_user_features2 in scan_features() - update TM user feature bits in scan_features()" * tag 'powerpc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Update TM user feature bits in scan_features() powerpc: Update cpu_user_features2 in scan_features() powerpc: scan_features() updates incorrect bits for REAL_LE
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu由 Linus Torvalds 提交于
Pull IOMMU fixes from Joerg Roedel: "The fixes include: - Two patches to revert the use of default domains in the ARM SMMU driver. Enabling this caused regressions which need more thorough fixing. So the regressions are fixed for now by disabling the use of default domains. - A fix for a v4.4 regression in the AMD IOMMU driver which broke devices behind invisible PCIe-to-PCI bridges with IOMMU enabled" * tag 'iommu-fixes-v4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: Don't allocate resources for bypass domains iommu/arm-smmu: Fix stream-match conflict with IOMMU_DOMAIN_DMA iommu/amd: Fix checking of pci dma aliases
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
Pull drm fixes from Dave Airlie: "i915, nouveau and amdgpu/radeon fixes in this: nouveau: Two fixes, one for a regression with dithering and one for a bug hit by the userspace drivers. i915: A few fixes, mostly things heading for stable, two important skylake GT3/4 hangs. radeon/amdgpu: Some audio, suspend/resume and some runtime PM fixes, along with two patches to harden the userptr ABI a bit" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (24 commits) drm: Loongson-3 doesn't fully support wc memory drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queries amdgpu/uvd: add uvd fw version for amdgpu drm/amdgpu: forbid mapping of userptr bo through radeon device file drm/radeon: forbid mapping of userptr bo through radeon device file drm/amdgpu: bump the afmt limit for CZ, ST, Polaris drm/amdgpu: use defines for CRTCs and AMFT blocks drm/dp/mst: Validate port in drm_dp_payload_send_msg() drm/nouveau/kms: fix setting of default values for dithering properties drm/radeon: print a message if ATPX dGPU power control is missing Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control" drm/amdgpu/acp: fix resume on CZ systems with AZ audio drm/radeon: add a quirk for a XFX R9 270X drm/radeon: print pci revision as well as pci ids on driver load drm/i915: Use fw_domains_put_with_fifo() on HSW drm/i915: Force ringbuffers to not be at offset 0 drm/i915: Adjust size of PIPE_CONTROL used for gen8 render seqno write drm/i915/skl: Fix spurious gpu hang with gt3/gt4 revs drm/i915/skl: Fix rc6 based gpu/system hang drm/i915/userptr: Hold mmref whilst calling get-user-pages ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "Again a relatively calm week without surprise: most of fixes are about HD-audio, including fixes for Cirrus codec regression and a race over regmap access. Although both change are slightly unintuitive, the risk of further breakage is quite low, I hope. Other than that, all the rest are trivial" * tag 'sound-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix possible race on regmap bypass flip ALSA: pcxhr: Fix missing mutex unlock ALSA: hda - add PCI ID for Intel Broxton-T ALSA: hda - Keep powering up ADCs on Cirrus codecs ALSA: hda/realtek - Add ALC3234 headset mode for Optiplex 9020m ALSA - hda: hdmi check NULL pointer in hdmi_set_chmap ALSA: hda - Don't trust the reported actual power state
-
- 22 4月, 2016 28 次提交
-
-
由 Greg Kroah-Hartman 提交于
Merge tag 'phy-for-4.6-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-linus Kishon writes: phy: for 4.6-rc *) make rockchip-dp and rockchip-emmc PHY child device of GRF Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Greg Kroah-Hartman 提交于
Merge tag 'fixes-for-v4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: usb: fixes for v4.6-rc5 No more major fixes left. Out of the 6 fixes we have here, 4 are on dwc3. The most important is the memory leak fix in dwc3/debugfs.c. We also have a fix for PHY handling in suspend/resume and a fix for dwc3-omap's error handling. Suspend/resume also had the potential to trigger a NULL pointer dereference on dwc3; that's also fixed now. Our good ol' ffs function gets a use-after-free fix while the generic composite.c layer has a robustness fix by making sure reserved fields of a possible SSP device capability descriptor is cleared to 0.
-
由 Steven Rostedt 提交于
When doing a make allmodconfig, I hit the following compile error: In file included from builtin-check.c:32:0: elf.h:22:18: fatal error: gelf.h: No such file or directory compilation terminated. ... Digging into it, it appears that the $(shell ..) command in the Makefile does not give the proper result when it fails to find -lelf, and continues to compile objtool. Instead, use the "try-run" makefile macro to perform the test. This gives a proper result for both cases. Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NJosh Poimboeuf <jpoimboe@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at> Cc: Borislav Petkov <bp@alien8.de> Cc: Chris J Arges <chris.j.arges@canonical.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Pedro Alves <palves@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Fixes: 442f04c3 ("objtool: Add tool to perform compile-time stack metadata validation") Link: http://lkml.kernel.org/r/20160420153234.GA24032@home.goodmis.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
Misc radeon and amdgpu bug fixes for 4.6. * 'drm-fixes-4.6' of git://people.freedesktop.org/~agd5f/linux: amdgpu/uvd: add uvd fw version for amdgpu drm/amdgpu: forbid mapping of userptr bo through radeon device file drm/radeon: forbid mapping of userptr bo through radeon device file drm/amdgpu: bump the afmt limit for CZ, ST, Polaris drm/amdgpu: use defines for CRTCs and AMFT blocks drm/radeon: print a message if ATPX dGPU power control is missing Revert "drm/radeon: disable runtime pm on PX laptops without dGPU power control" drm/amdgpu/acp: fix resume on CZ systems with AZ audio drm/radeon: add a quirk for a XFX R9 270X drm/radeon: print pci revision as well as pci ids on driver load drm/amdgpu: when suspending, if uvd/vce was running. need to cancel delay work. drm/radeon: fix initial connector audio value
-
由 Huacai Chen 提交于
Signed-off-by: NHuacai Chen <chenhc@lemote.com> Cc: stable@vger.kernel.org Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
transform feedback fix. * 'linux-4.6' of git://github.com/skeggsb/linux: drm/nouveau/gr/gf100: select a stream master to fixup tfb offset queries
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
-
由 Sonny Jiang 提交于
Was previously always hardcoded to 0. Signed-off-by: NSonny Jiang <sonny.jiang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Jérôme Glisse 提交于
Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jérôme Glisse 提交于
Allowing userptr bo which are basicly a list of page from some vma (so either anonymous page or file backed page) would lead to serious corruption of kernel structures and counters (because we overwrite the page->mapping field when mapping buffer). This will already block if the buffer was populated before anyone does try to mmap it because then TTM_PAGE_FLAG_SG would be set in in the ttm_tt flags. But that flag is check before ttm_tt_populate in the ttm vm fault handler. So to be safe just add a check to verify_access() callback. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NJérôme Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Fixes array overflow on these chips. Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
Prerequiste for the next patch which ups the limits. Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 cpaul@redhat.com 提交于
With the joys of things running concurrently, there's always a chance that the port we get passed in drm_dp_payload_send_msg() isn't actually valid anymore. Because of this, we need to make sure we validate the reference to the port before we use it otherwise we risk running into various race conditions. For instance, on the Dell MST monitor I have here for testing, hotplugging it enough times causes us to kernel panic: [drm:intel_mst_enable_dp] 1 [drm:drm_dp_update_payload_part2] payload 0 1 [drm:intel_get_hpd_pins] hotplug event received, stat 0x00200000, dig 0x10101011, pins 0x00000020 [drm:intel_hpd_irq_handler] digital hpd port B - short [drm:intel_dp_hpd_pulse] got hpd irq on port B - short [drm:intel_dp_check_mst_status] got esi 00 10 00 [drm:drm_dp_update_payload_part2] payload 1 1 general protection fault: 0000 [#1] SMP … Call Trace: [<ffffffffa012b632>] drm_dp_update_payload_part2+0xc2/0x130 [drm_kms_helper] [<ffffffffa032ef08>] intel_mst_enable_dp+0xf8/0x180 [i915] [<ffffffffa0310dbd>] haswell_crtc_enable+0x3ed/0x8c0 [i915] [<ffffffffa030c84d>] intel_atomic_commit+0x5ad/0x1590 [i915] [<ffffffffa01db877>] ? drm_atomic_set_crtc_for_connector+0x57/0xe0 [drm] [<ffffffffa01dc4e7>] drm_atomic_commit+0x37/0x60 [drm] [<ffffffffa0130a3a>] drm_atomic_helper_set_config+0x7a/0xb0 [drm_kms_helper] [<ffffffffa01cc482>] drm_mode_set_config_internal+0x62/0x100 [drm] [<ffffffffa01d02ad>] drm_mode_setcrtc+0x3cd/0x4e0 [drm] [<ffffffffa01c18e3>] drm_ioctl+0x143/0x510 [drm] [<ffffffffa01cfee0>] ? drm_mode_setplane+0x1b0/0x1b0 [drm] [<ffffffff810f79a7>] ? hrtimer_start_range_ns+0x1b7/0x3a0 [<ffffffff81212962>] do_vfs_ioctl+0x92/0x570 [<ffffffff81590852>] ? __sys_recvmsg+0x42/0x80 [<ffffffff81212eb9>] SyS_ioctl+0x79/0x90 [<ffffffff816b4e32>] entry_SYSCALL_64_fastpath+0x1a/0xa4 RIP [<ffffffffa012b026>] drm_dp_payload_send_msg+0x146/0x1f0 [drm_kms_helper] Which occurs because of the hotplug event shown in the log, which ends up causing DRM's dp helpers to drop the port we're updating the payload on and panic. CC: stable@vger.kernel.org Signed-off-by: NLyude <cpaul@redhat.com> Reviewed-by: NDavid Airlie <airlied@linux.ie> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://github.com/skeggsb/linux由 Dave Airlie 提交于
Single nouveau regression fix * 'linux-4.6' of git://github.com/skeggsb/linux: drm/nouveau/kms: fix setting of default values for dithering properties
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
git://anongit.freedesktop.org/drm-intel由 Dave Airlie 提交于
Hi Dave, fixes all around, all but one are cc: stable material, the most important ones are likely the Skylake hang fixes from Mika. * tag 'drm-intel-fixes-2016-04-21' of git://anongit.freedesktop.org/drm-intel: drm/i915: Use fw_domains_put_with_fifo() on HSW drm/i915: Force ringbuffers to not be at offset 0 drm/i915: Adjust size of PIPE_CONTROL used for gen8 render seqno write drm/i915/skl: Fix spurious gpu hang with gt3/gt4 revs drm/i915/skl: Fix rc6 based gpu/system hang drm/i915/userptr: Hold mmref whilst calling get-user-pages drm/i915: Fixup the free space logic in ring_prepare drm/i915/skl+: Use plane size for relative data rate calculation
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux由 Linus Torvalds 提交于
Pull RTC fixes from Alexandre Belloni: "A few fixes for the RTC subsystem. The documentation fix already missed 4.5 so I think it is worth taking it now: A documentation fix for s3c and two fixes for the ds1307" * tag 'rtc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: ds1307: Use irq when available for wakeup-source device rtc: ds1307: ds3231 temperature s16 overflow rtc: s3c: Document in binding that only s3c6410 needs a src clk
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm由 Linus Torvalds 提交于
Pull power management fixes from Rafael Wysocki: "Two fixes for issues introduced recently, one for an intel_pstate driver problem uncovered by the recent switch over from using timers and the other one for a potential cpufreq core problem related to system suspend/resume. Specifics: - Fix an intel_pstate driver problem causing CPUs to get stuck in the highest P-state when completely idle uncovered by the recent switch over from using timers (Rafael Wysocki). - Avoid attempts to get the current CPU frequency when all devices (like I2C controllers that may be nedded for that purpose) have been suspended during system suspend/resume (Rafael Wysocki)" * tag 'pm+acpi-4.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set intel_pstate: Avoid getting stuck in high P-states when idle
-
由 Nishanth Menon 提交于
With commit 8bc2a407 ("rtc: ds1307: add support for the DT property 'wakeup-source'") we lost the ability for rtc irq functionality for devices that are actually hooked on a real IRQ line and have capability to wakeup as well. This is not an expected behavior. So, instead of just not requesting IRQ, skip the IRQ requirement only if interrupts are not defined for the device. Fixes: 8bc2a407 ("rtc: ds1307: add support for the DT property 'wakeup-source'") Reported-by: NTony Lindgren <tony@atomide.com> Cc: Michael Lange <linuxstuff@milaw.biz> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: NNishanth Menon <nm@ti.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
由 Zhuang Yuyao 提交于
while retrieving temperature from ds3231, the result may be overflow since s16 is too small for a multiplication with 250. ie. if temp_buf[0] == 0x2d, the result (s16 temp) will be negative. Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Tested-by: NMichael Tatarinov <kukabu@gmail.com> Signed-off-by: NAlexandre Belloni <alexandre.belloni@free-electrons.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Fix memory leak in iwlwifi, from Matti Gottlieb. 2) Add missing registration of netfilter arp_tables into initial namespace, from Florian Westphal. 3) Fix potential NULL deref in DecNET routing code. 4) Restrict NETLINK_URELEASE to truly bound sockets only, from Dmitry Ivanov. 5) Fix dst ref counting in VRF, from David Ahern. 6) Fix TSO segmenting limits in i40e driver, from Alexander Duyck. 7) Fix heap leak in PACKET_DIAG_MCLIST, from Mathias Krause. 8) Ravalidate IPV6 datagram socket cached routes properly, particularly with UDP, from Martin KaFai Lau. 9) Fix endian bug in RDS dp_ack_seq handling, from Qing Huang. 10) Fix stats typing in bcmgenet driver, from Eric Dumazet. 11) Openvswitch needs to orphan SKBs before ipv6 fragmentation handing, from Joe Stringer. 12) SPI device reference leak in spi_ks8895 PHY driver, from Mark Brown. 13) atl2 doesn't actually support scatter-gather, so don't advertise the feature. From Ben Hucthings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits) openvswitch: use flow protocol when recalculating ipv6 checksums Driver: Vmxnet3: set CHECKSUM_UNNECESSARY for IPv6 packets atl2: Disable unimplemented scatter/gather feature net/mlx4_en: Split SW RX dropped counter per RX ring net/mlx4_core: Don't allow to VF change global pause settings net/mlx4_core: Avoid repeated calls to pci enable/disable net/mlx4_core: Implement pci_resume callback net: phy: spi_ks8895: Don't leak references to SPI devices net: ethernet: davinci_emac: Fix platform_data overwrite net: ethernet: davinci_emac: Fix Unbalanced pm_runtime_enable qede: Fix single MTU sized packet from firmware GRO flow qede: Fix setting Skb network header qede: Fix various memory allocation error flows for fastpath tcp: Merge tx_flags and tskey in tcp_shifted_skb tcp: Merge tx_flags and tskey in tcp_collapse_retrans drivers: net: cpsw: fix wrong regs access in cpsw_ndo_open tcp: Fix SOF_TIMESTAMPING_TX_ACK when handling dup acks openvswitch: Orphan skbs before IPv6 defrag Revert "Prevent NUll pointer dereference with two PHYs on cpsw" VSOCK: Only check error on skb_recv_datagram when skb is NULL ...
-
由 Simon Horman 提交于
When using masked actions the ipv6_proto field of an action to set IPv6 fields may be zero rather than the prevailing protocol which will result in skipping checksum recalculation. This patch resolves the problem by relying on the protocol in the flow key rather than that in the set field action. Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.") Cc: Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shrikrishna Khare 提交于
For IPv6, if the device indicates that the checksum is correct, set CHECKSUM_UNNECESSARY. Reported-by: NSubbarao Narahari <snarahari@vmware.com> Signed-off-by: NShrikrishna Khare <skhare@vmware.com> Signed-off-by: NJin Heo <heoj@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
atl2 includes NETIF_F_SG in hw_features even though it has no support for non-linear skbs. This bug was originally harmless since the driver does not claim to implement checksum offload and that used to be a requirement for SG. Now that SG and checksum offload are independent features, if you explicitly enable SG *and* use one of the rare protocols that can use SG without checkusm offload, this potentially leaks sensitive information (before you notice that it just isn't working). Therefore this obscure bug has been designated CVE-2016-2117. Reported-by: NJustin Yackoski <jyackoski@crypto-nite.com> Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Fixes: ec5f0615 ("net: Kill link between CSUM and SG features.") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Paul Burton 提交于
Commit 2a078705 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") & commit 78930f09 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") both introduce code which accesses gic_vpes entries in the pcpu_masks array. However, this array has length NR_CPUS. If NR_CPUS is less than gic_vpes (ie. the kernel supports use of less CPUs than are present in the system) then we overrun the array, clobber some other data & generally die pretty promptly. Most notably this affects uniprocessor kernels running on any multicore or multithreaded Malta with a GIC (ie. the vast majority of real Malta boards). Fix this by only accessing up to min(gic_vpes, NR_CPUS) entries in the pcpu_masks array, preventing the array overrun. Fixes: 2a078705 ("irqchip/mips-gic: Use gic_vpes instead of NR_CPUS") Fixes: 78930f09 ("irqchip/mips-gic: Clear percpu_masks correctly when mapping") Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/1461234714-9975-1-git-send-email-paul.burton@imgtec.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David S. Miller 提交于
Or Gerlitz says: ==================== Mellaox 40G driver fixes for 4.6-rc With the fix for ARM bug being under the works, these are few other fixes for mlx4 we have ready to go. Eran addressed the problematic/wrong reporting of dropped packets, Daniel fixed some matters related to PPC EEH's and Jenny's patch makes sure VFs can't change the port's pause settings. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eran Ben Elisha 提交于
Count SW packet drops per RX ring instead of a global counter. This will allow monitoring the number of rx drops per ring. In addition, SW rx_dropped counter was overwritten by HW rx_dropped counter, sum both of them instead to show the accurate value. Fixes: a3333b35 ('net/mlx4_en: Moderate ethtool callback to [...] ') Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Reported-by: NBrenden Blanco <bblanco@plumgrid.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Reported-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eugenia Emantayev 提交于
Currently changing global pause settings is done via SET_PORT command with input modifier GENERAL. This command is allowed for each VF since MTU setting is done via the same command. Change the above to the following scheme: before passing the request to the FW, the PF will check whether it was issued by a slave. If yes, don't change global pause and warn, otherwise change to the requested value and store for further reference. Signed-off-by: NEugenia Emantayev <eugenia@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-