- 26 6月, 2020 4 次提交
-
-
由 Jason A. Donenfeld 提交于
Basically no drivers care about the return value here, and there's no __must_check that would make casting to void sensible, so remove it. Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jason A. Donenfeld 提交于
The napi_gro_receive function no longer returns GRO_DROP ever, making handling GRO_DROP dead code. This commit removes that dead code. Further, it's not even clear that device drivers have any business in taking action after passing off received packets; that's arguably out of their hands. Fixes: 6570bc79 ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()") Signed-off-by: NJason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Beznea 提交于
DMA buffers were not freed on failure path of at91ether_open(). Along with changes for freeing the DMA buffers the enable/disable interrupt instructions were moved to at91ether_start()/at91ether_stop() functions and the operations on at91ether_stop() were done in their reverse order (compared with how is done in at91ether_start()): before this patch the operation order on interface open path was as follows: 1/ alloc DMA buffers 2/ enable tx, rx 3/ enable interrupts and the order on interface close path was as follows: 1/ disable tx, rx 2/ disable interrupts 3/ free dma buffers. Fixes: 7897b071 ("net: macb: convert to phylink") Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Claudiu Beznea 提交于
Call pm_runtime_put_sync() on failure path of at91ether_open. Fixes: e6a41c23 ("net: macb: ensure interface is not suspended on at91rm9200") Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 6月, 2020 6 次提交
-
-
由 Doug Berger 提交于
When commit 474ea9ca ("net: bcmgenet: correctly pad short packets") added the call to skb_padto() it should have been located before the nr_frags parameter was read since that value could be changed when padding packets with lengths between 55 and 59 bytes (inclusive). The use of a stale nr_frags value can cause corruption of the pad data when tx-scatter-gather is enabled. This corruption of the pad can cause invalid checksum computation when hardware offload of tx-checksum is also enabled. Since the original reason for the padding was corrected by commit 7dd39913 ("net: bcmgenet: fix skb_len in bcmgenet_xmit_single()") we can remove the software padding all together and make use of hardware padding of short frames as long as the hardware also always appends the FCS value to the frame. Fixes: 474ea9ca ("net: bcmgenet: correctly pad short packets") Signed-off-by: NDoug Berger <opendmb@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Doug Berger 提交于
The 16-bit value that holds a short in network byte order should be declared as a restricted big endian type to allow type checks to succeed during assignment. Fixes: 3e370952 ("net: bcmgenet: add support for ethtool rxnfc flows") Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NDoug Berger <opendmb@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Doug Berger 提交于
This function was originally removed by Baoyou Xie in commit e2072600 ("net: bcmgenet: remove unused function in bcmgenet.c") to prevent a build warning. Some of the functions removed by Baoyou Xie are now used for WAKE_FILTER support so his commit was reverted, but this function is still unused and the kbuild test robot dutifully reported the warning. This commit once again removes the remaining unused hfb functions. Fixes: 14da1510 ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"") Reported-by: Nkbuild test robot <lkp@intel.com> Signed-off-by: NDoug Berger <opendmb@gmail.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Colin Ian King 提交于
The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum enum dbg_status however there is a missing corresponding entry for this in the array s_status_str. This causes an out-of-bounds read when indexing into the last entry of s_status_str. Fix this by adding in the missing entry. Addresses-Coverity: ("Out-of-bounds read"). Fixes: 2d22bc83 ("qed: FW 8.42.2.0 debug features") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sascha Hauer 提交于
When writing the serdes configuration register was moved to mvneta_config_interface() the whole code block was removed from mvneta_port_power_up() in the assumption that its only purpose was to write the serdes configuration register. As mentioned by Russell King its purpose was also to check for valid interface modes early so that later in the driver we do not have to care for unexpected interface modes. Add back the test to let the driver bail out early on unhandled interface modes. Fixes: b4748553 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Reviewed-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sascha Hauer 提交于
In mvneta_config_interface() the RGMII modes are catched by the default case which is an error return. The RGMII modes are valid modes for the driver, so instead of returning an error add a break statement to return successfully. This avoids this warning for non comphy SoCs which use RGMII, like SolidRun Clearfog: WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c Fixes: b4748553 ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Reviewed-by: NRussell King <rmk+kernel@armlinux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2020 24 次提交
-
-
由 Vasundhara Volam 提交于
Virtual functions does not have VPD information. This patch modifies calling bnxt_read_vpd_info() only for PFs and avoids an unnecessary error log. Fixes: a0d0fd70 ("bnxt_en: Read partno and serialno of the board from VPD") Signed-off-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
On older firmware, the hardware statistics are not cleared when the driver frees the hardware stats contexts during ifdown. The driver expects these stats to be cleared and saves a copy before freeing the stats contexts. During the next ifup, the driver will likely allocate the same hardware stats contexts and this will cause a big increase in the counters as the old counters are added back to the saved counters. We fix it by making an additional firmware call to clear the counters before freeing the hw stats contexts when the firmware is the older 20.x firmware. Fixes: b8875ca3 ("bnxt_en: Save ring statistics before reset.") Reported-by: NJakub Kicinski <kicinski@fb.com> Reviewed-by: NVasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Tested-by: NJakub Kicinski <kicinski@fb.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Older firmware may not support legacy TX push properly and may not be disabling it. So we check certain firmware versions that may have this problem and disable legacy TX push unconditionally. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
We currently only store the firmware version as a string for ethtool and devlink info. Store it also as a version code. The next 2 patches will need to check the firmware major version to determine some workarounds. We also use the 16-bit firmware version fields if the firmware is newer and provides the 16-bit fields. Reviewed-by: NEdwin Peer <edwin.peer@broadcom.com> Signed-off-by: NMichael Chan <michael.chan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: cxgb4vf_main.c:275: warning: Function parameter or member 'persistent' not described in 'cxgb4vf_change_mac' cxgb4vf_main.c:275: warning: Excess function parameter 'persist' description in 'cxgb4vf_change_mac' Fixes: 16f8bd4b ("cxgb4vf: Add core T4 PCI-E SR-IOV Virtual Function hardware definitions and device communication code") Fixes: c6e0d914 ("cxgb4vf: Add T4 Virtual Function Scatter-Gather Engine DMA code") Fixes: e0a8b34a ("cxgb4vf: Add and initialize some sge params for VF driver") Fixes: c3168cab ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 0e23daeb ("drivers/net: chelsio/cxgb*: Convert timers to use timer_setup()") Fixes: 3f8cfd0d ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Update several kernel-doc line comments to fix warnings reported by make W=1. Fixes following class of warnings reported by make W=1 in several places: l2t.c:616: warning: Cannot understand * @dev: net_device pointer t4_hw.c:3175: warning: Function parameter or member 'adap' not described in 't4_get_exprom_version' t4_hw.c:3175: warning: Excess function parameter 'adapter' description in 't4_get_exprom_version' Fixes: 56d36be4 ("cxgb4: Add HW and FW support code") Fixes: fd3a4790 ("cxgb4: Add packet queues and packet DMA code") Fixes: 26f7cbc0 ("cxgb4: Don't attempt to upgrade T4 firmware when cxgb4 will end up as a slave") Fixes: 793dad94 ("RDMA/cxgb4: Fix bug for active and passive LE hash collision path") Fixes: ba3f8cd5 ("cxgb4: Add support in cxgb4 to get expansion rom version via ethtool") Fixes: f7502659 ("cxgb4: Add API to alloc l2t entry; also update existing ones") Fixes: ddc7740d ("cxgb4: Decode link down reason code obtained from firmware") Fixes: 193c4c28 ("cxgb4: Update T6 Buffer Group and Channel Mappings") Fixes: 8f46d467 ("cxgb4: Use Firmware params to get buffer-group map") Fixes: a4569504 ("cxgb4: time stamping interface for PTP") Fixes: 9c33e420 ("cxgb4: Add PTP Hardware Clock (PHC) support") Fixes: c3168cab ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Fixes: 5ccf9d04 ("cxgb4: update API for TP indirect register access") Fixes: 3bdb376e ("cxgb4: introduce SMT ops to prepare for SMAC rewrite support") Fixes: 736c3b94 ("cxgb4: collect egress and ingress SGE queue contexts") Fixes: f56ec676 ("cxgb4: Add support for ethtool i2c dump") Fixes: 9d5fd927 ("cxgb4/cxgb4vf: add support for ndo_set_vf_vlan") Fixes: 98f3697f ("cxgb4: add tc flower match support for tunnel VNI") Fixes: 02d805dc ("cxgb4: use new fw interface to get the VIN and smt index") Fixes: 3f8cfd0d ("cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()") Fixes: d429005f ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Fixes: 0e395b3c ("cxgb4: add FLOWC based QoS offload") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Remove the set but unused variable when DCB is disabled. Instead, do the calculation directly inline. Fixes following warning in make W=1: cxgb4_main.c: In function 'cfg_queues': cxgb4_main.c:5380:29: warning: variable 'n1g' set but not used [-Wunused-but-set-variable] u32 i, n10g = 0, qidx = 0, n1g = 0; ^ Fixes: 116ca924 ("cxgb4: fix checks for max queues to allocate") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Move the DCB version string array extern to header file. Fixes following sparse warning: cxgb4_dcb.c:13:12: warning: symbol 'dcb_ver_array' was not declared. Should it be static? Fixes: ebddd97a ("cxgb4: add support to display DCB info") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
The checksum field in IPv4 header is in __sum16 and ip_fast_csum() also returns __sum16. So, no need to cast it to u16. Fixes following sparse warning: sge.c:1539:47: warning: cast from restricted __sum16 sge.c:1539:44: warning: incorrect type in assignment (different base types) sge.c:1539:44: expected restricted __sum16 [usertype] check sge.c:1539:44: got unsigned short [usertype] Fixes: d0a1299c ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
The data in destination buffer is expected to be be parsed in big endian. So, use the right context. Fixes following sparse warning: cudbg_lib.c:2041:44: warning: incorrect type in assignment (different base types) cudbg_lib.c:2041:44: expected unsigned long long [usertype] cudbg_lib.c:2041:44: got restricted __be64 [usertype] Fixes: 736c3b94 ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Use correct type to check for all-mask exact match IP addresses. Fixes following sparse warnings due to big endian value checks against 0xffffffff in is_addr_all_mask(): cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer Fixes: 3eb8b62d ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
The source and destination L4 ports in filter offload need to be in CPU endian. They will finally be converted to Big Endian after all operations are done and before giving them to hardware. The L4 ports for NAT are expected to be passed as a byte stream TCB. So, treat them as such. Fixes following sparse warnings in several places: cxgb4_tc_flower.c:159:33: warning: cast from restricted __be16 cxgb4_tc_flower.c:159:33: warning: incorrect type in argument 1 (different base types) cxgb4_tc_flower.c:159:33: expected unsigned short [usertype] val cxgb4_tc_flower.c:159:33: got restricted __be16 [usertype] dst Fixes: dca4faeb ("cxgb4: Add LE hash collision bug fix path in LLD driver") Fixes: 62488e4b ("cxgb4: add basic tc flower offload support") Fixes: 557ccbf9 ("cxgb4: add tc flower support for L3/L4 rewrite") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser. Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32 Fixes: 2e8aad7b ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime() conversion. Fixes following sparse warning: sge.c:3282:43: warning: cast to restricted __be64 Fixes: a4569504 ("cxgb4: time stamping interface for PTP") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Check for whether PTP is enabled or not at the caller and perform locking/unlocking at the caller. Fixes following sparse warning: sge.c:1641:26: warning: context imbalance in 'cxgb4_eth_xmit' - different lock contexts for basic block Fixes: a4569504 ("cxgb4: time stamping interface for PTP") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rahul Lakkireddy 提交于
Move code handling L2T ARP failures to the only caller. Fixes following sparse warning: skbuff.h:2091:29: warning: context imbalance in 'handle_failed_resolution' - unexpected unlock Fixes: 749cb5fe ("cxgb4: Replace arpq_head/arpq_tail with SKB double link-list code") Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
Variable 'abs_ppfid' in qed_dev.c:qed_llh_add_mac_filter() always gets printed, but is initialized only under 'ref_cnt == 1' condition. This results in: In file included from ./include/linux/kernel.h:15:0, from ./include/asm-generic/bug.h:19, from ./arch/x86/include/asm/bug.h:86, from ./include/linux/bug.h:5, from ./include/linux/io.h:11, from drivers/net/ethernet/qlogic/qed/qed_dev.c:35: drivers/net/ethernet/qlogic/qed/qed_dev.c: In function 'qed_llh_add_mac_filter': ./include/linux/printk.h:358:2: warning: 'abs_ppfid' may be used uninitialized in this function [-Wmaybe-uninitialized] printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~ drivers/net/ethernet/qlogic/qed/qed_dev.c:983:17: note: 'abs_ppfid' was declared here u8 filter_idx, abs_ppfid; ^~~~~~~~~ ...under W=1+. Fix this by initializing it with zero. Fixes: 79284ade ("qed: Add llh ppfid interface and 100g support for offload protocols") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
Sizes of all ILT blocks must be reset before ILT recomputing when disabling clients, or memory allocation may exceed ILT shadow array and provoke system crashes. Fixes: 1408cc1f ("qed: Introduce VFs") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
Set edev->cdev pointer to NULL after calling remove() callback to avoid using of already freed object. Fixes: ccc67ef5 ("qede: Error recovery process") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
Currently PTP cyclecounter and timecounter are initialized only on the first probing and are cleaned up during removal. This means that PTP becomes non-functional after device recovery. Fix this by unconditional PTP initialization on probing and clearing Tx pending bit on exiting. Fixes: ccc67ef5 ("qede: Error recovery process") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
This is likely a copy'n'paste mistake. The amount of ILT lines to reserve for a single VF was being multiplied by the total VFs count. This led to a huge redundancy in reservation and potential lines drainouts. Fixes: 1408cc1f ("qed: Introduce VFs") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
25ms sleep cycles in waiting for PF response are excessive and may lead to different timeout failures. Start to wait with short udelays, and in most cases polling will end here. If the time was not sufficient, switch to msleeps. usleep_range() may go far beyond 100us depending on platform and tick configuration, hence atomic udelays for consistency. Also add explicit DMA barriers since 'done' always comes from a shared request-response DMA pool, and note that in the comment nearby. Fixes: 1408cc1f ("qed: Introduce VFs") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
Set rdma_wq pointer to NULL after destroying the workqueue and check for it when adding new events to fix crashes on driver unload. Fixes: cee9fbd8 ("qede: Add qedr framework") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Lobakin 提交于
qed_spq_unregister_async_cb() should be called before qed_rdma_info_free() to avoid crash-spawning uses-after-free. Instead of calling it from each subsystem exit code, do it in one place on PF down. Fixes: 291d57f6 ("qed: Fix rdma_info structure allocation") Signed-off-by: NAlexander Lobakin <alobakin@marvell.com> Signed-off-by: NIgor Russkikh <irusskikh@marvell.com> Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 6月, 2020 1 次提交
-
-
由 Ido Schimmel 提交于
The second commit cited below performed a cast of 'u32 buffsize' to '(u16 *)' when calling mlxsw_sp_port_headroom_8x_adjust(): mlxsw_sp_port_headroom_8x_adjust(mlxsw_sp_port, (u16 *) &buffsize); Colin noted that this will behave differently on big endian architectures compared to little endian architectures. Fix this by following Colin's suggestion and have the function accept and return 'u32' instead of passing the current size by reference. Fixes: da382875 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC") Fixes: 60833d54 ("mlxsw: spectrum: Adjust headroom buffers for 8x ports") Signed-off-by: NIdo Schimmel <idosch@mellanox.com> Reported-by: NColin Ian King <colin.king@canonical.com> Suggested-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 6月, 2020 3 次提交
-
-
由 Heiner Kallweit 提交于
Typically the firmware takes care that tp->ocp_base is reset to its default value. That's not the case (at least) for RTL8117. As a result subsequent PHY access reads/writes the wrong page and the link is broken. Fix this be resetting tp->ocp_base explicitly. Fixes: 229c1e0d ("r8169: load firmware for RTL8168fp/RTL8117") Reported-by: NAaron Ma <mapengyu@gmail.com> Tested-by: NAaron Ma <mapengyu@gmail.com> Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dany Madden 提交于
Continue the reset path when partner adapter is not ready or H_CLOSED is returned from reset crq. This patch allows the CRQ init to proceed to establish a valid CRQ for traffic to flow after reset. Signed-off-by: NDany Madden <drt@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shannon Nelson 提交于
Even with moving netif_tx_disable() to an earlier point when taking down the queues for a reconfiguration, we still end up with the occasional netdev watchdog Tx Timeout complaint. The old method of using netif_trans_update() works fine for queue 0, but has no effect on the remaining queues. Using netif_device_detach() allows us to signal to the watchdog to ignore us for the moment. Fixes: beead698 ("ionic: Add the basic NDO callbacks for netdev support") Signed-off-by: NShannon Nelson <snelson@pensando.io> Acked-by: NJonathan Toppins <jtoppins@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 6月, 2020 2 次提交
-
-
由 Thomas Falcon 提交于
The max MTU limit defined for ibmveth is not accounting for virtual ethernet buffer overhead, which is twenty-two additional bytes set aside for the ethernet header and eight additional bytes of an opaque handle reserved for use by the hypervisor. Update the max MTU to reflect this overhead. Fixes: d894be57 ("ethernet: use net core MTU range checking in more drivers") Fixes: 110447f8 ("ethernet: fix min/max MTU typos") Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wenxu 提交于
If the representor is removed, then identify the indirect flow_blocks that need to be removed by the release callback and the port representor structure. To identify the port representor structure, a new indr.cb_priv field needs to be introduced. The flow_block also needs to be removed from the driver list from the cleanup path. Fixes: 1fac52da ("net: flow_offload: consolidate indirect flow_block infrastructure") Signed-off-by: Nwenxu <wenxu@ucloud.cn> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-