- 29 7月, 2015 2 次提交
-
-
由 David Hildenbrand 提交于
When guest debugging is active, space-switch events might be enforced by PER. While the PER events are correctly filtered out, space-switch-events could be forwarded to the guest, although from a guest point of view, they should not have been reported. Therefore we have to filter out space-switch events being concurrently reported with a PER event, if the PER event got filtered out. To do so, we theoretically have to know which instruction was responsible for the event. As the applicable instructions modify the PSW address, the address space set in the PSW and even the address space in cr1, we can't figure out the instruction that way. For this reason, we have to rely on the information about the old and new address space, in order to guess the responsible instruction type and do appropriate checks for space-switch events. Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Dominik Dingel 提交于
As enabling storage keys might fail, we should forward the error. Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 23 7月, 2015 13 次提交
-
-
由 Paolo Bonzini 提交于
We can disable CD unconditionally when there is no assigned device. KVM now forces guest PAT to all-writeback in that case, so it makes sense to also force CR0.CD=0. When there are assigned devices, emulate cache-disabled operation through the page tables. This behavior is consistent with VMX microcode, where CD/NW are not touched by vmentry/vmexit. However, keep this dependent on the quirk because OVMF enables the caches too late. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Mihai Donțu 提交于
Allow a nested hypervisor to single step its guests. Signed-off-by: NMihai Donțu <mihai.dontu@gmail.com> [Fix overlong line. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Sending of notification is done by exiting vcpu to user space if KVM_REQ_HV_CRASH is enabled for vcpu. At exit to user space the kvm_run structure contains system_event with type KVM_SYSTEM_EVENT_CRASH to notify about guest crash occurred. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Reviewed-by: NPeter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
Added kvm Hyper-V context hv crash variables as storage of Hyper-V crash msrs. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Reviewed-by: NPeter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
vcpu_debug is useful macro like kvm_debug but additionally includes vcpu context inside output. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Reviewed-by: NPeter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Andrey Smetanin 提交于
This patch introduce Hyper-V related source code file - hyperv.c and per vm and per vcpu hyperv context structures. All Hyper-V MSR's and hypercall code moved into hyperv.c. All Hyper-V kvm/vcpu fields moved into appropriate hyperv context structures. Copyrights and authors information copied from x86.c to hyperv.c. Signed-off-by: NAndrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: NDenis V. Lunev <den@openvz.org> Reviewed-by: NPeter Hornyack <peterhornyack@google.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Gleb Natapov <gleb@kernel.org> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Eugene Korenevsky 提交于
According to Intel SDM several checks must be applied for memory operands of VMX instructions. Long mode: #GP(0) or #SS(0) depending on the segment must be thrown if the memory address is in a non-canonical form. Protected mode, checks in chronological order: - The segment type must be checked with access type (read or write) taken into account. For write access: #GP(0) must be generated if the destination operand is located in a read-only data segment or any code segment. For read access: #GP(0) must be generated if if the source operand is located in an execute-only code segment. - Usability of the segment must be checked. #GP(0) or #SS(0) depending on the segment must be thrown if the segment is unusable. - Limit check. #GP(0) or #SS(0) depending on the segment must be thrown if the memory operand effective address is outside the segment limit. Signed-off-by: NEugene Korenevsky <ekorenevsky@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
Make them clearly architecture-dependent; the capability is valid for all architectures, but the argument is not. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiao Guangrong 提交于
OVMF depends on WB to boot fast, because it only clears caches after it has set up MTRRs---which is too late. Let's do writeback if CR0.CD is set to make it happy, similar to what SVM is already doing. Signed-off-by: NXiao Guangrong <guangrong.xiao@intel.com> Tested-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
The logic of the disabled_quirks field usually results in a double negation. Wrap it in a simple function that checks the bit and negates it. Based on a patch from Xiao Guangrong. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiao Guangrong 提交于
kvm_mtrr_get_guest_memory_type never returns -1 which is implied in the current code since if @type = -1 (means no MTRR contains the range), iter.partial_map must be true Simplify the code to indicate this fact Signed-off-by: NXiao Guangrong <guangrong.xiao@intel.com> Tested-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Xiao Guangrong 提交于
Currently code uses default memory type if MTRR is fully disabled, fix it by using UC instead. Signed-off-by: NXiao Guangrong <guangrong.xiao@intel.com> Tested-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Don't use shared bluetooth antenna in iwlwifi driver for management frames, from Emmanuel Grumbach. 2) Fix device ID check in ath9k driver, from Felix Fietkau. 3) Off by one in xen-netback BUG checks, from Dan Carpenter. 4) Fix IFLA_VF_PORT netlink attribute validation, from Daniel Borkmann. 5) Fix races in setting peeked bit flag in SKBs during datagram receive. If it's shared we have to clone it otherwise the value can easily be corrupted. Fix from Herbert Xu. 6) Revert fec clock handling change, causes regressions. From Fabio Estevam. 7) Fix use after free in fq_codel and sfq packet schedulers, from WANG Cong. 8) ipvlan bug fixes (memory leaks, missing rcu_dereference_bh, etc.) from WANG Cong and Konstantin Khlebnikov. 9) Memory leak in act_bpf packet action, from Alexei Starovoitov. 10) ARM bpf JIT bug fixes from Nicolas Schichan. 11) Fix backwards compat of ANY_LAYOUT in virtio_net driver, from Michael S Tsirkin. 12) Destruction of bond with different ARP header types not handled correctly, fix from Nikolay Aleksandrov. 13) Revert GRO receive support in ipv6 SIT tunnel driver, causes regressions because the GRO packets created cannot be processed properly on the GSO side if we forward the frame. From Herbert Xu. 14) TCCR update race and other fixes to ravb driver from Sergei Shtylyov. 15) Fix SKB leaks in caif_queue_rcv_skb(), from Eric Dumazet. 16) Fix panics on packet scheduler filter replace, from Daniel Borkmann. 17) Make sure AF_PACKET sees properly IP headers in defragmented frames (via PACKET_FANOUT_FLAG_DEFRAG option), from Edward Hyunkoo Jee. 18) AF_NETLINK cannot hold mutex in RCU callback, fix from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (84 commits) ravb: fix ring memory allocation net: phy: dp83867: Fix warning check for setting the internal delay openvswitch: allocate nr_node_ids flow_stats instead of num_possible_nodes netlink: don't hold mutex in rcu callback when releasing mmapd ring ARM: net: fix vlan access instructions in ARM JIT. ARM: net: handle negative offsets in BPF JIT. ARM: net: fix condition for load_order > 0 when translating load instructions. tcp: suppress a division by zero warning drivers: net: cpsw: remove tx event processing in rx napi poll inet: frags: fix defragmented packet's IP header for af_packet net: mvneta: fix refilling for Rx DMA buffers stmmac: fix setting of driver data in stmmac_dvr_probe sched: cls_flow: fix panic on filter replace sched: cls_flower: fix panic on filter replace sched: cls_bpf: fix panic on filter replace net/mdio: fix mdio_bus_match for c45 PHY net: ratelimit warnings about dst entry refcount underflow or overflow caif: fix leaks and race in caif_queue_rcv_skb() qmi_wwan: add the second QMI/network interface for Sierra Wireless MC7305/MC7355 ravb: fix race updating TCCR ...
-
- 22 7月, 2015 19 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux由 Linus Torvalds 提交于
Pull ARM64 fixes from Catalin Marinas: - arm64 build fix following the move of the thread_struct to the end of task_struct and the asm offsets becoming too large for the AArch64 ISA - preparatory patch for moving irq_data struct members (applied now to reduce dependency for the next merging window) * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ARM64/irq: Use access helper irq_data_get_affinity_mask() arm64: switch_to: calculate cpu context pointer using separate register
-
由 Jiang Liu 提交于
This is a preparatory patch for moving irq_data struct members. Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Reviewed-by: NHanjun Guo <hanjun.guo@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Will Deacon 提交于
Commit 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") moved the thread_struct to the bottom of task_struct. As a result, the offset is now too large to be used in an immediate add on arm64 with some kernel configs: arch/arm64/kernel/entry.S: Assembler messages: arch/arm64/kernel/entry.S:588: Error: immediate out of range arch/arm64/kernel/entry.S:597: Error: immediate out of range This patch calculates the offset using an additional register instead of an immediate offset. Fixes: 0c8c0f03 ("x86/fpu, sched: Dynamically allocate 'struct fpu'") Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Olof Johansson <olof@lixom.net> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NWill Deacon <will.deacon@arm.com> Tested-by: NGuenter Roeck <linux@roeck-us.net> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Sergei Shtylyov 提交于
The driver is written as if it can adapt to a low memory situation allocating less RX skbs and TX aligned buffers than the respective RX/TX ring sizes. In reality though the driver would malfunction in this case. Stop being overly smart and just fail in such situation -- this is achieved by moving the memory allocation from ravb_ring_format() to ravb_ring_init(). We leave dma_map_single() calls in place but make their failure non-fatal by marking the corresponding RX descriptors with zero data size which should prevent DMA to an invalid addresses. Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Murphy 提交于
Fix warning: logical ‘or’ of collectively exhaustive tests is always true Change the internal delay check from an 'or' condition to an 'and' condition. Reported-by: NDavid Binderman <dcb314@hotmail.com> Signed-off-by: NDan Murphy <dmurphy@ti.com> Acked-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Chris J Arges 提交于
Some architectures like POWER can have a NUMA node_possible_map that contains sparse entries. This causes memory corruption with openvswitch since it allocates flow_cache with a multiple of num_possible_nodes() and assumes the node variable returned by for_each_node will index into flow->stats[node]. Use nr_node_ids to allocate a maximal sparse array instead of num_possible_nodes(). The crash was noticed after 3af229f2 was applied as it changed the node_possible_map to match node_online_map on boot. Fixes: 3af229f2Signed-off-by: NChris J Arges <chris.j.arges@canonical.com> Acked-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Westphal 提交于
Kirill A. Shutemov says: This simple test-case trigers few locking asserts in kernel: int main(int argc, char **argv) { unsigned int block_size = 16 * 4096; struct nl_mmap_req req = { .nm_block_size = block_size, .nm_block_nr = 64, .nm_frame_size = 16384, .nm_frame_nr = 64 * block_size / 16384, }; unsigned int ring_size; int fd; fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); if (setsockopt(fd, SOL_NETLINK, NETLINK_RX_RING, &req, sizeof(req)) < 0) exit(1); if (setsockopt(fd, SOL_NETLINK, NETLINK_TX_RING, &req, sizeof(req)) < 0) exit(1); ring_size = req.nm_block_nr * req.nm_block_size; mmap(NULL, 2 * ring_size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0); return 0; } +++ exited with 0 +++ BUG: sleeping function called from invalid context at /home/kas/git/public/linux-mm/kernel/locking/mutex.c:616 in_atomic(): 1, irqs_disabled(): 0, pid: 1, name: init 3 locks held by init/1: #0: (reboot_mutex){+.+...}, at: [<ffffffff81080959>] SyS_reboot+0xa9/0x220 #1: ((reboot_notifier_list).rwsem){.+.+..}, at: [<ffffffff8107f379>] __blocking_notifier_call_chain+0x39/0x70 #2: (rcu_callback){......}, at: [<ffffffff810d32e0>] rcu_do_batch.isra.49+0x160/0x10c0 Preemption disabled at:[<ffffffff8145365f>] __delay+0xf/0x20 CPU: 1 PID: 1 Comm: init Not tainted 4.1.0-00009-gbddf4c4818e0 #253 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS Debian-1.8.2-1 04/01/2014 ffff88017b3d8000 ffff88027bc03c38 ffffffff81929ceb 0000000000000102 0000000000000000 ffff88027bc03c68 ffffffff81085a9d 0000000000000002 ffffffff81ca2a20 0000000000000268 0000000000000000 ffff88027bc03c98 Call Trace: <IRQ> [<ffffffff81929ceb>] dump_stack+0x4f/0x7b [<ffffffff81085a9d>] ___might_sleep+0x16d/0x270 [<ffffffff81085bed>] __might_sleep+0x4d/0x90 [<ffffffff8192e96f>] mutex_lock_nested+0x2f/0x430 [<ffffffff81932fed>] ? _raw_spin_unlock_irqrestore+0x5d/0x80 [<ffffffff81464143>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8182fc3d>] netlink_set_ring+0x1ed/0x350 [<ffffffff8182e000>] ? netlink_undo_bind+0x70/0x70 [<ffffffff8182fe20>] netlink_sock_destruct+0x80/0x150 [<ffffffff817e484d>] __sk_free+0x1d/0x160 [<ffffffff817e49a9>] sk_free+0x19/0x20 [..] Cong Wang says: We can't hold mutex lock in a rcu callback, [..] Thomas Graf says: The socket should be dead at this point. It might be simpler to add a netlink_release_ring() function which doesn't require locking at all. Reported-by: N"Kirill A. Shutemov" <kirill@shutemov.name> Diagnosed-by: NCong Wang <cwang@twopensource.com> Suggested-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Nicolas Schichan says: ==================== BPF JIT fixes for ARM These patches are fixing bugs in the ARM JIT and should probably find their way to a stable kernel. All 60 test_bpf tests in Linux 4.1 release are now passing OK (was 54 out of 60 before). ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
This makes BPF_ANC | SKF_AD_VLAN_TAG and BPF_ANC | SKF_AD_VLAN_TAG_PRESENT have the same behaviour as the in kernel VM and makes the test_bpf LD_VLAN_TAG and LD_VLAN_TAG_PRESENT tests pass. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
Previously, the JIT would reject negative offsets known during code generation and mishandle negative offsets provided at runtime. Fix that by calling bpf_internal_load_pointer_neg_helper() appropriately in the jit_get_skb_{b,h,w} slow path helpers and by forcing the execution flow to the slow path helpers when the offset is negative. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Schichan 提交于
To check whether the load should take the fast path or not, the code would check that (r_skb_hlen - load_order) is greater than the offset of the access using an "Unsigned higher or same" condition. For halfword accesses and an skb length of 1 at offset 0, that test is valid, as we end up comparing 0xffffffff(-1) and 0, so the fast path is taken and the filter allows the load to wrongly succeed. A similar issue exists for word loads at offset 0 and an skb length of less than 4. Fix that by using the condition "Signed greater than or equal" condition for the fast path code for load orders greater than 0. Signed-off-by: NNicolas Schichan <nschichan@freebox.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Andrew Morton reported following warning on one ARM build with gcc-4.4 : net/ipv4/inet_hashtables.c: In function 'inet_ehash_locks_alloc': net/ipv4/inet_hashtables.c:617: warning: division by zero Even guarded with a test on sizeof(spinlock_t), compiler does not like current construct on a !CONFIG_SMP build. Remove the warning by using a temporary variable. Fixes: 095dc8e0 ("tcp: fix/cleanup inet_ehash_locks_alloc()") Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
This reverts commit a2673b6e. Kinglong Mee reports a memory leak with that patch, and Jan Kara confirms: "Thanks for report! You are right that my patch introduces a race between fsnotify kthread and fsnotify_destroy_group() which can result in leaking inotify event on group destruction. I haven't yet decided whether the right fix is not to queue events for dying notification group (as that is pointless anyway) or whether we should just fix the original problem differently... Whenever I look at fsnotify code mark handling I get lost in the maze of locks, lists, and subtle differences between how different notification systems handle notification marks :( I'll think about it over night" and after thinking about it, Jan says: "OK, I have looked into the code some more and I found another relatively simple way of fixing the original oops. It will be IMHO better than trying to fixup this issue which has more potential for breakage. I'll ask Linus to revert the fsnotify fix he already merged and send a new fix" Reported-by: NKinglong Mee <kinglongmee@gmail.com> Requested-by: NJan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David S. Miller 提交于
Merge tag 'wireless-drivers-for-davem-2015-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== ath9k: * fix device ID check for AR956x iwlwifi: * bug fixes specific for 8000 series * fix a crash in time events * fix a crash in PCIe transport * fix BT Coex code that prevented association on certain devices (3160). * revert the new RBD allocation model because it introduced a bug when running on weak VM setups. * new device IDs ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl由 Linus Torvalds 提交于
Pull pin control fixes from Linus Walleij: "Here are some overly ripe pin control fixes for the v4.2 series. They got delayed because of various crap commits and having to clean and rinse the patch stack a few times. Now they are however looking good. - some dead defines dropped from the Samsung driver, was targeted for -rc2 but got delayed - drop the strict mode from abx500, this was too strict - fix the R-Car sparse IRQs code to work as intended - fix the IRQ code for the pinctrl-single GPIO backend to not enforce threaded IRQs - clear the latched events/IRQs for the Broadcom BCM2835 driver - fix up debugfs for the Freescale imx1 driver - fix a typo bug in the Schmitt Trigger setup in the LPC18xx driver" * tag 'pinctrl-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: lpc18xx: fix schmitt trigger setup Subject: pinctrl: imx1-core: Fix debug output in .pin_config_set callback pinctrl: bcm2835: Clear the event latch register when disabling interrupts pinctrl: single: ensure pcs irq will not be forced threaded sh-pfc: fix sparse GPIOs for R-Car SoCs pinctrl: abx500: remove strict mode pinctrl: samsung: Remove old unused defines
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs由 Linus Torvalds 提交于
Pull UDF fix from Jan Kara: "A fix for UDF corruption when certain disk-format feature is enabled" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Don't corrupt unalloc spacetable when writing it
-
由 Linus Torvalds 提交于
Merge tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing sample code fix from Steven Rostedt: "He Kuang noticed that the sample code using the trace_event helper function __get_dynamic_array_len() is broken. This only changes the sample code, and I'm pushing this now instead of later because I don't want others using the broken code as an example when using it for real" * tag 'trace-v4.2-rc2-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Fix sample output of dynamic arrays
-
由 Mugunthan V N 提交于
With commit c03abd84 ("net: ethernet: cpsw: don't requests IRQs we don't use") common isr and napi are separated into separate tx isr and rx isr/napi, but still in rx napi tx events are handled. So removing the tx event handling in rx napi. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Edward Hyunkoo Jee 提交于
When ip_frag_queue() computes positions, it assumes that the passed sk_buff does not contain L2 headers. However, when PACKET_FANOUT_FLAG_DEFRAG is used, IP reassembly functions can be called on outgoing packets that contain L2 headers. Also, IPv4 checksum is not corrected after reassembly. Fixes: 7736d33f ("packet: Add pre-defragmentation support for ipv4 fanouts.") Signed-off-by: NEdward Hyunkoo Jee <edjee@google.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Jerry Chu <hkchu@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 7月, 2015 6 次提交
-
-
由 Simon Guinot 提交于
With the actual code, if a memory allocation error happens while refilling a Rx descriptor, then the original Rx buffer is both passed to the networking stack (in a SKB) and let in the Rx ring. This leads to various kernel oops and crashes. As a fix, this patch moves Rx descriptor refilling ahead of building SKB with the associated Rx buffer. In case of a memory allocation failure, data is dropped and the original DMA buffer is put back into the Rx ring. Signed-off-by: NSimon Guinot <simon.guinot@sequanux.org> Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Tested-by: NYoann Sculo <yoann@sculo.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joachim Eastwood 提交于
Commit 803f8fc4 ("stmmac: move driver data setting into stmmac_dvr_probe") mistakenly set priv and not priv->dev as driver data. This meant that the remove, resume and suspend callbacks that fetched and tried to use this data would most likely explode. Fix the issue by using the correct variable. Fixes: 803f8fc4 ("stmmac: move driver data setting into stmmac_dvr_probe") Signed-off-by: NJoachim Eastwood <manabian@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Daniel Borkmann says: ==================== Couple of classifier fixes This fixes a couple of panics in the form of (analogous for cls_flow{,er}): [ 912.759276] BUG: unable to handle kernel NULL pointer dereference at (null) [ 912.759373] IP: [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf] [ 912.759441] PGD 8783c067 PUD 5f684067 PMD 0 [ 912.759491] Oops: 0002 [#1] SMP DEBUG_PAGEALLOC [ 912.759543] Modules linked in: cls_bpf(E) act_gact [...] [ 912.772734] CPU: 3 PID: 10489 Comm: tc Tainted: G W E 4.2.0-rc2+ #73 [ 912.775004] Hardware name: Apple Inc. MacBookAir5,1/Mac-66F35F19FE2A0D05, BIOS MBA51.88Z.00EF.B02.1211271028 11/27/2012 [ 912.777327] task: ffff88025eaa8000 ti: ffff88005f734000 task.ti: ffff88005f734000 [ 912.779662] RIP: 0010:[<ffffffffa09d4d6d>] [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf] [ 912.781991] RSP: 0018:ffff88005f7379c8 EFLAGS: 00010286 [ 912.784183] RAX: ffff880201d64e48 RBX: 0000000000000000 RCX: ffff880201d64e40 [ 912.786402] RDX: 0000000000000000 RSI: ffffffffa09d51c0 RDI: ffffffffa09d51a6 [ 912.788625] RBP: ffff88005f737a68 R08: 0000000000000000 R09: 0000000000000000 [ 912.790854] R10: 0000000000000001 R11: 0000000000000001 R12: ffff880078ab5a80 [ 912.793082] R13: ffff880232b31570 R14: ffff88005f737ae0 R15: ffff8801e215d1d0 [ 912.795181] FS: 00007f3c0c80d740(0000) GS:ffff880265400000(0000) knlGS:0000000000000000 [ 912.797281] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 912.799402] CR2: 0000000000000000 CR3: 000000005460f000 CR4: 00000000001407e0 [ 912.799403] Stack: [ 912.799407] ffffffff00000000 ffff88023ea18000 000000005f737a08 0000000000000000 [ 912.799415] ffffffff81f06140 ffff880201d64e40 0000000000000000 ffff88023ea1804c [ 912.799418] 0000000000000000 ffff88023ea18044 ffff88023ea18030 ffff88023ea18038 [ 912.799418] Call Trace: [ 912.799437] [<ffffffff816d5685>] tc_ctl_tfilter+0x335/0x910 [ 912.799443] [<ffffffff813622a8>] ? security_capable+0x48/0x60 [ 912.799448] [<ffffffff816b90e5>] rtnetlink_rcv_msg+0x95/0x240 [ 912.799454] [<ffffffff810f612d>] ? trace_hardirqs_on+0xd/0x10 [ 912.799456] [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40 [ 912.799459] [<ffffffff816b902f>] ? rtnetlink_rcv+0x1f/0x40 [ 912.799461] [<ffffffff816b9050>] ? rtnetlink_rcv+0x40/0x40 [ 912.799464] [<ffffffff816df38f>] netlink_rcv_skb+0xaf/0xc0 [ 912.799467] [<ffffffff816b903e>] rtnetlink_rcv+0x2e/0x40 [ 912.799469] [<ffffffff816deaef>] netlink_unicast+0xef/0x1b0 [ 912.799471] [<ffffffff816defa0>] netlink_sendmsg+0x3f0/0x620 [ 912.799476] [<ffffffff81687028>] sock_sendmsg+0x38/0x50 [ 912.799479] [<ffffffff81687938>] ___sys_sendmsg+0x288/0x290 [ 912.799482] [<ffffffff810f7852>] ? __lock_acquire+0x572/0x2050 [ 912.799488] [<ffffffff810265db>] ? native_sched_clock+0x2b/0x90 [ 912.799493] [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100 [ 912.799497] [<ffffffff8116135f>] ? __audit_syscall_entry+0xaf/0x100 [ 912.799501] [<ffffffff8112aa19>] ? current_kernel_time+0x69/0xd0 [ 912.799505] [<ffffffff81266f16>] ? __fget_light+0x66/0x90 [ 912.799508] [<ffffffff81688812>] __sys_sendmsg+0x42/0x80 [ 912.799510] [<ffffffff81688862>] SyS_sendmsg+0x12/0x20 [ 912.799515] [<ffffffff817f9a6e>] entry_SYSCALL_64_fastpath+0x12/0x76 [ 912.799540] Code: 4d 88 49 8b 57 08 48 89 51 08 49 8b 57 10 48 89 c8 48 83 c0 08 48 89 51 10 48 8b 51 10 48 c7 c6 c0 51 9d a0 48 c7 c7 a6 51 9d a0 <48> 89 02 48 8b 51 08 48 89 42 08 48 b8 00 02 20 00 00 00 ad de [ 912.799544] RIP [<ffffffffa09d4d6d>] cls_bpf_change+0x23d/0x268 [cls_bpf] [ 912.799544] RSP <ffff88005f7379c8> [ 912.799545] CR2: 0000000000000000 [ 912.807380] ---[ end trace a6440067cfdc7c29 ]--- I've split them into 3 patches, so they can be backported easier when needed. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
The following test case causes a NULL pointer dereference in cls_flow: tc filter add dev foo parent 1: handle 0x1 flow hash keys dst action ok tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ flow hash keys mark action drop To be more precise, actually two different panics are fixed, the first occurs because tcf_exts_init() is not called on the newly allocated filter when we do a replace. And the second panic uncovered after that happens since the arguments of list_replace_rcu() are swapped, the old element needs to be the first argument and the new element the second. Fixes: 70da9f0b ("net: sched: cls_flow use RCU") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
The following test case causes a NULL pointer dereference in cls_flower: tc filter add dev foo parent 1: flower eth_type ipv4 action ok flowid 1:1 tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ flower eth_type ipv6 action ok flowid 1:1 The problem is that commit 77b9900e ("tc: introduce Flower classifier") accidentally swapped the arguments of list_replace_rcu(), the old element needs to be the first argument and the new element the second. Fixes: 77b9900e ("tc: introduce Flower classifier") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
The following test case causes a NULL pointer dereference in cls_bpf: FOO="1,6 0 0 4294967295," tc filter add dev foo parent 1: bpf bytecode "$FOO" flowid 1:1 action ok tc filter replace dev foo parent 1: pref 49152 handle 0x1 \ bpf bytecode "$FOO" flowid 1:1 action drop The problem is that commit 1f947bf1 ("net: sched: rcu'ify cls_bpf") accidentally swapped the arguments of list_replace_rcu(), the old element needs to be the first argument and the new element the second. Fixes: 1f947bf1 ("net: sched: rcu'ify cls_bpf") Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-