ati_remote causes repeats after only .23 seconds with my remote and
makes it hard to use comfortably. Make a precise way of setting the
repeat delay time in milliseconds and default it to 500ms.  The old
behavior can be had by setting repeat_delay = 0.
Signed-off-by: NKarl Pickett <karl.pickett@gmail.com>
Signed-off-by: NVincent Vanackere <vincent.vanackere@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

IRQF_DISABLED is the proper name.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This patch adds module parameters for several timing values used
in the driver. These values can vary based on the hardware design
and how much capacitive filtering there is on the touch panel inputs,
and the resistance of the panel.
Signed-off-by: NCliff Brake <cbrake@bec-systems.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

In preparation to switching to struct device and class device
going away provide an alias to allow drivers that create devices
to use either input_dev->cdev.dev or input_dev->dev.parent to
put them into sysfs tree. The former will go away once conversion
to struct device is complete.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use input_get_drvdata() and input_set_drvdata() instead.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use input_get_drvdata() and input_set_drvdata() instead.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use input_get_drvdata() and input_set_drvdata() instead.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use input_get_drvdata() and input_set_drvdata() instead.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use input_get_drvdata() and input_set_drvdata() instead.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Add helpers to set up and access driver-specific data in input
device structure. Once conversion to struct driver is complete
we will drop input_dev->private and will use dev_get_drvdata()
and dev_set_drvdata().
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

itmtoch, mtouchusb and touchkitusb have been replaced with
composite usbtouchscreen driver and can be removed now.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It turns out I had an old 2-button Logitech mouse that responds
to Logitech's queries with model of 1.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The ATI Remote Wonder II can be configured with one of 16 unique logical
channels. Allowing up to 16 remotes to be used independently within
range of each other. This change adds functionality to configure the
receiver and filter the input data to respond or exclude remotes
configured with different logical channels.
Signed-off-by: NPeter Stokes <linux@dadeos.freeserve.co.uk>
Acked-by: NVille Syrjala <syrjala@sci.fi>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Also fix URB leak in gtco_probe error path, formatting fixes.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

As the number of keymaps increases and is very unlikely to
reduce, this patch helps to reduce memory consumption by
declaring all keymaps as __initdata and copying right keymap
during DMI detection. On x86 this make the module size at
runtime going from 10616 to 9428: a bit more than 1kb saved.
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

It turns out that the keymaps in the wistron driver are almost the
same, the main difference being some keys which may not exist and
leds which might not be present. Therefore it's possible to write
a generic keymap which would allow the use of an unknown keyboard
with little drawbacks. The user can select it specifying the parameter
"keymap=generic".
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Acerhk supports already a lot of laptops. Lets import its database so
that everyone can benefit of the work of Olaf Tauber. Only the "tm_new"
laptops were imported. "tm_old" laptops could be possible but requires
more testing and probably only few laptops are still alive. "dritek"
laptops should probably be imported into a different driver. Also compress
the keymaps by fitting each entry on an int. Most of the dmi matching was
written based on google searches, so it's rather prone to errors. That's
why I'm asking people to confirm it works.

Support to generate switch input events was added as some laptops indicate
lid open/close through this interface.

This adds the following hardware:
Acer TravelMate 370
Acer TravelMate 380
Acer TravelMate C300
Acer TravelMate C100
Acer TravelMate C110
Acer TravelMate 250
Acer TravelMate 350
Acer TravelMate 620
Acer TravelMate 630
Acer TravelMate 220
Acer TravelMate 230
Acer TravelMate 260
Acer TravelMate 280
Acer TravelMate 360
Acer TravelMate 2100
Acer TravelMate 2410
Acer Aspire 1500
Acer Aspire 1600
Acer Aspire 3020
Acer Aspire 5020
Medion MD 2900
Medion MD 40100
Medion MD 95400
Medion MD 96500
Fujitsu Siemens Amilo 7820
Signed-off-by: NEric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

There are mice reporting to logitech's queries with model
of 0. Do not claim that these are Logitech mice.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Disable both keyboard and auxiliary interfaces before switching
to legacy mode to prevent atkbd from getting "empty" interrupts.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Pete Zaitcev reports that with his touchpad, if he lifts the finger
and places it elsewhere, the pointer sometimes warps dramatically.
This happens because we don't store coordinates unless we detect a
touch so sometimes we have stale coordinates in queue (from where
the finger left the pad) and averaging makes cursor to jump across
the screen. The solution is to always store the latest coordinates.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Delete the never-compiled source file drivers/input/power.c, and
remove its entry from the corresponding Makefile, as there is no
Kconfig file that refers to the config option INPUT_POWER
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Use printk_ratelimit() to protect ourselves from buggy drivers or
devices endlessly generating invalid events.

Suggested by Andrew Morton.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Encode synaptics model in psmouse->model so it will be
exported via sysfs as input_dev->id.version and become
visible for applications.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Using usb_unlink_urb can cause iforce_open to fail when called
soon after iforce_release. Also updated my email address and
replaced calls to printk() by dbg(), warn(), info(), err()...
Signed-off-by: NJohann Deneux <johann.deneux@gmail.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The naming convention in input handlers was very confusing -
client stuctures were called lists, regular lists were also
called lists making anyone looking at the code go mad.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

 - consolidate code for binding handlers to a device
 - return error codes from handlers connect() methods back to input
   core and log failures
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

This should get rid of "atkbd.c: Suprious NAK on isa0060/serio0"
messages caused by broken MUX implementation. The box does not
have external PS/2 ports so disabling MUX mode is safe.
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

The following bug happens when insmoding hp_sdc_mlc.ko:

    HP SDC MLC: Registering the System Domain Controller's HIL MLC.
    BUG: rwlock recursion on CPU#0, hotplug/1814, 00854734
    Backtrace:
     [<10267560>] _raw_write_lock+0x50/0x88
     [<10104008>] _write_lock_irqsave+0x14/0x24
     [<008537d4>] hp_sdc_mlc_out+0x38/0x25c [hp_sdc_mlc]
     [<0084ebd8>] hilse_donode+0x308/0x470 [hil_mlc]
     [<0084ed80>] hil_mlcs_process+0x40/0x6c [hil_mlc]
     [<10130f80>] tasklet_action+0x78/0xb8
     [<10130cec>] __do_softirq+0x60/0xcc
     [<1010428c>] __lock_text_end+0x38/0x48
     [<10108348>] do_cpu_irq_mask+0xf0/0x11c
     [<1010b068>] intr_return+0x0/0xc
Signed-off-by: NHelge Deller <deller@gmx.de>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

Signed-off-by: NRodolfo Giometti <giometti@enneenne.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>

When using MS protocol the driver should wait for a byte with
bit 6 set before assuming that it sees beginning of a data packet.
This should allow driver better cope with lost bytes and prevent
spurious left/right button events when serial communication is
disturbed by a CPU-hungry real-time process.

Also fix some formatting.
Signed-off-by: NPeter Osterlund <petero2@telia.com>
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>