Make them clearly architecture-dependent; the capability is valid for
all architectures, but the argument is not.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The logic of the disabled_quirks field usually results in a double
negation.  Wrap it in a simple function that checks the bit and
negates it.

Based on a patch from Xiao Guangrong.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Memory-mapped LVT0 register already contains the new value when APICv
traps so we can't directly detect a change.
Memorize a bit we are interested in to enable legacy NMI watchdog.
Suggested-by: NYoshida Nobuo <yoshida.nb@ncos.nec.co.jp>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Legacy NMI watchdog didn't work after migration/resume, because
vapics_in_nmi_mode was left at 0.

Cc: stable@vger.kernel.org
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Writes were a bit racy, but hard to turn into a bug at the same time.
(Particularly because modern Linux doesn't use this feature anymore.)
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
[Actually the next patch makes it much, much easier to trigger the race
 so I'm including this one for stable@ as well. - Paolo]
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

lapic.timer_mode was not properly initialized after migration, which
broke few useful things, like login, by making every sleep eternal.

Fix this by calling apic_update_lvtt in kvm_apic_post_state_restore.

There are other slowpaths that update lvtt, so this patch makes sure
something similar doesn't happen again by calling apic_update_lvtt
after every modification.

Cc: stable@vger.kernel.org
Fixes: f30ebc31 ("KVM: x86: optimize some accesses to LVTT and SPIV")
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Do not process INITs immediately while in system management mode, keep
it instead in apic->pending_events.  Tell userspace if an INIT is
pending when they issue GET_VCPU_EVENTS, and similarly handle the
new field in SET_VCPU_EVENTS.

Note that the same treatment should be done while in VMX non-root mode.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds the interface between x86.c and the emulator: the
SMBASE register, a new emulator flag, the RSM instruction.  It also
adds a new request bit that will be used by the KVM_SMI ioctl.
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Logical x2APIC stops working if we rewrite it with zeros.
The best references are SDM April 2015: 10.12.10.1 Logical Destination
Mode in x2APIC Mode

  [...], the LDR are initialized by hardware based on the value of
  x2APIC ID upon x2APIC state transitions.

and SDM April 2015: 10.12.10.2 Deriving Logical x2APIC ID from the Local
x2APIC ID

  The LDR initialization occurs whenever the x2APIC mode is enabled
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SDM April 2015, 10.12.5 State Changes From xAPIC Mode to x2APIC Mode
• Any APIC ID value written to the memory-mapped local APIC ID register
  is not preserved.

Fix it by sourcing vcpu_id (= initial APIC ID) instead of memory-mapped
APIC ID.  Proper use of apic functions would result in two calls to
recalculate_apic_map(), so this patch makes a new helper.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

An MSI interrupt should only be delivered to the lowest priority CPU
when it has RH=1, regardless of the delivery mode. Modified
kvm_is_dm_lowest_prio() to check for either irq->delivery_mode == APIC_DM_LOWPRI
or irq->msi_redir_hint.

Moved kvm_is_dm_lowest_prio() into lapic.h and renamed to
kvm_lowest_prio_delivery().

Changed a check in kvm_irq_delivery_to_apic_fast() from
irq->delivery_mode == APIC_DM_LOWPRI to kvm_is_dm_lowest_prio().
Signed-off-by: NJames Sullivan <sullivan.james.f@gmail.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Extended struct kvm_lapic_irq with bool msi_redir_hint, which will
be used to determine if the delivery of the MSI should target only
the lowest priority CPU in the logical group specified for delivery.
(In physical dest mode, the RH bit is not relevant). Initialized the value
of msi_redir_hint to true when RH=1 in kvm_set_msi_irq(), and initialized
to false in all other cases.

Added value of msi_redir_hint to a debug message dump of an IRQ in
apic_send_ipi().
Signed-off-by: NJames Sullivan <sullivan.james.f@gmail.com>
Reviewed-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Change to u16 if they only contain data in the low 16 bits.

Change the level field to bool, since we assign 1 sometimes, but
just mask icr_low with APIC_INT_ASSERT in apic_send_ipi.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

x86 architecture defines differences between the reset and INIT sequences.
INIT does not initialize the FPU (including MMX, XMM, YMM, etc.), TSC, PMU,
MSRs (in general), MTRRs machine-check, APIC ID, APIC arbitration ID and BSP.

References (from Intel SDM):

"If the MP protocol has completed and a BSP is chosen, subsequent INITs (either
to a specific processor or system wide) do not cause the MP protocol to be
repeated." [8.4.2: MP Initialization Protocol Requirements and Restrictions]

[Table 9-1. IA-32 Processor States Following Power-up, Reset, or INIT]

"If the processor is reset by asserting the INIT# pin, the x87 FPU state is not
changed." [9.2: X87 FPU INITIALIZATION]

"The state of the local APIC following an INIT reset is the same as it is after
a power-up or hardware reset, except that the APIC ID and arbitration ID
registers are not affected." [10.4.7.3: Local APIC State After an INIT Reset
("Wait-for-SIPI" State)]
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Message-Id: <1428924848-28212-1-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introducing KVM_CAP_DISABLE_QUIRKS for disabling x86 quirks that were previous
created in order to overcome QEMU issues. Those issue were mostly result of
invalid VM BIOS.  Currently there are two quirks that can be disabled:

1. KVM_QUIRK_LINT0_REENABLED - LINT0 was enabled after boot
2. KVM_QUIRK_CD_NW_CLEARED - CD and NW are cleared after boot

These two issues are already resolved in recent releases of QEMU, and would
therefore be disabled by QEMU.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Message-Id: <1428879221-29996-1-git-send-email-namit@cs.technion.ac.il>
[Report capability from KVM_CHECK_EXTENSION too. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Sparse is reporting a "we previously assumed 'src' could be null" error.
This is true as far as the static analyzer can see, but in practice only
IPIs can set shorthand to self and they also set 'src', so it's ok.
Still, move the initialization of x2apic_ipi (and thus the NULL check for
src right before the first use.

While at it, initializing ret to "false" is somewhat confusing because of
the almost immediate assigned of "true" to the same variable.  Thus,
initialize it to "true" and modify it in the only path that used to use
the value from "bool ret = false".  There is no change in generated code
from this change.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After reset, the CPU can change the BSP, which will be used upon INIT.  Reset
should return the BSP which QEMU asked for, and therefore handled accordingly.

To quote: "If the MP protocol has completed and a BSP is chosen, subsequent
INITs (either to a specific processor or system wide) do not cause the MP
protocol to be repeated."
[Intel SDM 8.4.2: MP Initialization Protocol Requirements and Restrictions]
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Message-Id: <1427933438-12782-3-git-send-email-namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

recalculate_apic_map() uses two passes over all VCPUs.  This is a relic
from time when we selected a global mode in the first pass and set up
the optimized table in the second pass (to have a consistent mode).

Recent changes made mixed mode unoptimized and we can do it in one pass.
Format of logical MDA is a function of the mode, so we encode it in
apic_logical_id() and drop obsoleted variables from the struct.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-5-git-send-email-rkrcmar@redhat.com>
[Add lid_bits temporary in apic_logical_id. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We want to support mixed modes and the easiest solution is to avoid
optimizing those weird and unlikely scenarios.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-4-git-send-email-rkrcmar@redhat.com>
[Add comment above KVM_APIC_MODE_* defines. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Broadcast allowed only one global APIC mode, but mixed modes are
theoretically possible.  x2APIC IPI doesn't mean 0xff as broadcast,
the rest does.

x2APIC broadcasts are accepted by xAPIC.  If we take SDM to be logical,
even addreses beginning with 0xff should be accepted, but real hardware
disagrees.  This patch aims for simple code by considering most of real
behavior as undefined.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-3-git-send-email-rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In mixed modes, we musn't deliver xAPIC IPIs like x2APIC and vice versa.
Instead of preserving the information in apic_send_ipi(), we regain it
by converting all destinations into correct MDA in the slow path.
This allows easier reasoning about subsequent matching.

Our kvm_apic_broadcast() had an interesting design decision: it didn't
consider IOxAPIC 0xff as broadcast in x2APIC mode ...
everything worked because IOxAPIC can't set that in physical mode and
logical mode considered it as a message for first 8 VCPUs.
This patch interprets IOxAPIC 0xff as x2APIC broadcast.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Message-Id: <1423766494-26150-2-git-send-email-rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is needed in e.g. ARM vGIC emulation, where the MMIO handling
depends on the VCPU that does the access.
Signed-off-by: NNikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: NAndre Przywara <andre.przywara@arm.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

kvm_ioapic_update_eoi() wasn't called if directed EOI was enabled.
We need to do that for irq notifiers.  (Like with edge interrupts.)

Fix it by skipping EOI broadcast only.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=82211Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In commit b4eef9b3, we started to use hwapic_isr_update() != NULL
instead of kvm_apic_vid_enabled(vcpu->kvm).  This didn't work because
SVM had it defined and "apicv" path in apic_{set,clear}_isr() does not
change apic->isr_count, because it should always be 1.  The initial
value of apic->isr_count was based on kvm_apic_vid_enabled(vcpu->kvm),
which is always 0 for SVM, so KVM could have injected interrupts when it
shouldn't.

Fix it by implicitly setting SVM's hwapic_isr_update to NULL and make the
initial isr_count depend on hwapic_isr_update() for good measure.

Fixes: b4eef9b3 ("kvm: x86: vmx: NULL out hwapic_isr_update() in case of !enable_apicv")
Reported-and-tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If vcpu has a interrupt in vmx non-root mode, injecting that interrupt
requires a vmexit.  With posted interrupt processing, the vmexit
is not needed, and interrupts are fully taken care of by hardware.
In nested vmx, this feature avoids much more vmexits than non-nested vmx.

When L1 asks L0 to deliver L1's posted interrupt vector, and the target
VCPU is in non-root mode, we use a physical ipi to deliver POSTED_INTR_NV
to the target vCPU.  Using POSTED_INTR_NV avoids unexpected interrupts
if a concurrent vmexit happens and L1's vector is different with L0's.
The IPI triggers posted interrupt processing in the target physical CPU.

In case the target vCPU was not in guest mode, complete the posted
interrupt delivery on the next entry to L2.
Signed-off-by: NWincy Van <fanwenyi0529@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

With APICv, LAPIC timer interrupt is always delivered via IRR:
apic_find_highest_irr syncs PIR to IRR.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We forgot to re-check LAPIC after splitting the loop in commit
173beedc (KVM: x86: Software disabled APIC should still deliver
NMIs, 2014-11-02).
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Fixes: 173beedcSigned-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We cannot hit the bug now, but future patches will expose this path.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

To make the code self-documenting.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The majority of this patch turns
  result = 0; if (CODE) result = 1; return result;
into
  return CODE;
because we return bool now.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

And don't export the internal ones while at it.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Adds a function kvm_vcpu_set_pending_timer instead of calling
kvm_make_request in lapic.c.
Signed-off-by: NNicholas Krause <xerofoify@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add tracepoint to wait_lapic_expire.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
[Remind reader if early or late. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For the hrtimer which emulates the tscdeadline timer in the guest,
add an option to advance expiration, and busy spin on VM-entry waiting
for the actual expiration time to elapse.

This allows achieving low latencies in cyclictest (or any scenario
which requires strict timing regarding timer expiration).

Reduces average cyclictest latency from 12us to 8us
on Core i5 desktop.

Note: this option requires tuning to find the appropriate value
for a particular hardware/guest combination. One method is to measure the
average delay between apic_timer_fn and VM-entry.
Another method is to start with 1000ns, and increase the value
in say 500ns increments until avg cyclictest numbers stop decreasing.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In most cases calling hwapic_isr_update(), we always check if
kvm_apic_vid_enabled() == 1, but actually,
kvm_apic_vid_enabled()
    -> kvm_x86_ops->vm_has_apicv()
        -> vmx_vm_has_apicv() or '0' in svm case
            -> return enable_apicv && irqchip_in_kernel(kvm)

So its a little cost to recall vmx_vm_has_apicv() inside
hwapic_isr_update(), here just NULL out hwapic_isr_update() in
case of !enable_apicv inside hardware_setup() then make all
related stuffs follow this. Note we don't check this under that
condition of irqchip_in_kernel() since we should make sure
definitely any caller don't work  without in-kernel irqchip.
Signed-off-by: NTiejun Chen <tiejun.chen@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

While fixing an x2apic bug,
 17d68b76 KVM: x86: fix guest-initiated crash with x2apic (CVE-2013-6376)
we've made only one cluster available.  This means that the amount of
logically addressible x2APICs was reduced to 16 and VCPUs kept
overwriting themselves in that region, so even the first cluster wasn't
set up correctly.

This patch extends x2APIC support back to the logical_map's limit, and
keeps the CVE fixed as messages for non-present APICs are dropped.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

They can't be violated now, but play it safe for the future.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

x2apic allows destinations > 0xff and we don't want them delivered to
lower APICs.  They are correctly handled by doing nothing.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Physical mode can't address more than one APIC, but lowest-prio is
allowed, so we just reuse our paths.

SDM 10.6.2.1 Physical Destination:
  Also, for any non-broadcast IPI or I/O subsystem initiated interrupt
  with lowest priority delivery mode, software must ensure that APICs
  defined in the interrupt address are present and enabled to receive
  interrupts.

We could warn on top of that.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

False from kvm_irq_delivery_to_apic_fast() means that we don't handle it
in the fast path, but we still return false in cases that were perfectly
handled, fix that.
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>