提交 · 0d75565f1e8f098b80a34ccf70db450f60618ec8 · openeuler / Kernel

08 12月, 2006 40 次提交

[PATCH] PCEngines WRAP LED Support · 0d75565f

由 Kristian Kielhofner 提交于 12月 06, 2006

A driver for the PCEngines WRAP boards (http://www.pcengines.ch), which are
very similar to the Soekris net4801 (same NS SC1100 geode reference
design).

The LEDs on the WRAP are on different GPIO lines and I have modified and
copied the net48xx error led support for this.  It also includes support
for an "extra" led (in addition to error).  The three LEDs on the WRAP are
at GPIO lines 2,3,18 (WRAP LEDs from left to right).  This driver gives
access to the second and third LEDs by twiddling GPIO lines 3 & 18.

Because these boards are so similar to the net48xx, I basically sed-ed that
driver to form the basis for leds-wrap.c.  The only changes from
leds-net48xx.c are:

 - #define WRAP_EXTRA_LED_GPIO

 - name changes

 - duplicate relevant sections to provide support for the "extra" led

 - reverse the various *_led_set values.  The WRAP is "backwards" from the
   net48xx, and these needed to be updated for that.

[akpm@osdl.org: build fix]
Signed-off-by: NKristian Kielhofner <kris@krisk.org>
Acked-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

0d75565f

[PATCH] i2lib unused variable cleanup · f6337e2a

由 Mariusz Kozlowski 提交于 12月 06, 2006

  In file included from drivers/char/ip2/ip2main.c:285:
    drivers/char/ip2/i2lib.c: In function `i2Output':
    drivers/char/ip2/i2lib.c:1019: warning: unused variable `rc'
Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

f6337e2a

[PATCH] Correct misc_register return code handling in several drivers · 5d469ec0

由 Neil Horman 提交于 12月 06, 2006

Clean up several code points in which the return code from misc_register is
not handled properly.

Several modules failed to deregister various hooks when misc_register fails,
and this patch cleans them up.  Also there are a few modules that legitimately
don't care about the failure status of misc register.  These drivers however
unilaterally call misc_deregister on module unload.

Since misc_register doesn't initialize the list_head in the init_routine if it
fails, the deregister operation is at risk for oopsing when list_del is
called.  The initial solution was to manually init the list in the miscdev
structure in each of those modules, but the consensus in this thread was to
consolodate and do that universally inside misc_register.
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Kylene Jo Hall <kjhall@us.ibm.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Olaf Hering <olh@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

5d469ec0

[PATCH] drivers/cdrom/*: trivial vsnprintf() conversion · 5ac29e62

由 Alexey Dobriyan 提交于 12月 06, 2006

Fixing sbpcd.c baroque error printing in process.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

5ac29e62

[PATCH] Exar quad port serial · e0980daf

由 Paul B Schroeder 提交于 12月 06, 2006

This is on our "Envoy" boxes which we have, according to the documentation, an
"Exar ST16C554/554D Quad UART with 16-byte Fifo's".  The box also has two
other "on-board" serial ports and a modem chip.

The two on-board serial UARTs were being detected along with the first two
Exar UARTs.  The last two Exar UARTs were not showing up and neither was the
modem.

This patch was the only way I could the kernel to see beyond the standard four
serial ports and get all four of the Exar UARTs to show up.

[akpm@osdl.org: build fix]
Signed-off-by: NPaul B Schroeder <pschroeder@uplogix.com>
Cc: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

e0980daf

[PATCH] lockdep: annotate bcsp driver · f89d75f2

由 Peter Zijlstra 提交于 12月 06, 2006

    =============================================
    [ INFO: possible recursive locking detected ]
    2.6.18-1.2699.fc6 #1
    ---------------------------------------------
    swapper/0 is trying to acquire lock:
     (&list->lock#3){+...}, at: [<c05ad307>] skb_dequeue+0x12/0x43

    but task is already holding lock:
     (&list->lock#3){+...}, at: [<df98cd79>] bcsp_dequeue+0x6a/0x11e [hci_uart]

Two different list locks nest, annotate so.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NMarcel Holtmann <marcel@holtmann.org>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

f89d75f2

[PATCH] paride: return proper error code · 8bca98ca

由 Akinobu Mita 提交于 12月 06, 2006

This patch makes module init return proper value instead of -1 (-EPERM).

Cc: Tim Waugh <tim@cyberelk.net>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

8bca98ca

[PATCH] parport_pc: Add support for OX16PCI952 parallel port · c140e110

由 Ryan Underwood 提交于 12月 06, 2006

Add support for the parallel port (implemented as separate PCI function) on
the Oxford Semiconductor OX16PCI952.
Signed-off-by: NRyan Underwood <nemesis@icequake.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

c140e110

[PATCH] tifm: fix NULL ptr and style · 3316eaa3

由 Randy Dunlap 提交于 12月 06, 2006

Fix sparse NULL warning;
  drivers/misc/tifm_core.c:223:17: warning: Using plain integer as NULL pointer

Fix style while there.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

3316eaa3

[PATCH] paride_register(): shuffle return values · b4178ab5

由 Alexey Dobriyan 提交于 12月 06, 2006

paride_register() returns 1 on success, 0 on failure and module init
code looks like

	static int __init foo_init(void)
	{
		return paride_register(&foo) - 1;
	}

which is not what one get used to. Converted to usual 0/-E convention.

In case of kbic driver, unwind registration. It was just

	return (paride_register(&k951)||paride_register(&k971))-1;
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

b4178ab5

[PATCH] paride: rename pi_register() and pi_unregister() · f4330002

由 Alexey Dobriyan 提交于 12月 06, 2006

We're about to change the semantics of pi_register()'s return value, so
rename it to something else first, so that any unconverted code reliaby
breaks.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

f4330002

[PATCH] spi: set kset of master class dev explicitly · 3bd0f694

由 Hans-Christian Egtvedt 提交于 12月 06, 2006

<quote Imre Deak from Thu, 12 Jan 2006 21:18:54 +0200>
  In order for spi_busnum_to_master to work spi master devices must be linked
  into the spi_master_class.subsys.kset list.  At the moment the default
  class_obj_subsys.kset is used and we can't enumerate the master devices.
</quote>
Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

3bd0f694

[PATCH] spi: correct bus_num and buffer bug in spi core · 4740d387

由 Hans-Christian Egtvedt 提交于 12月 06, 2006

Correct the following in driver/spi/spi.c in function spi_busnum_to_master:

 * must allow bus_num 0, the if is really not needed.
 * correct the name buffer which is too small for bus_num >= 10000. It

should be 9 bytes big, not 8.
Signed-off-by: NHans-Christian Egtvedt <hcegtvedt@atmel.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

4740d387

[PATCH] lockdep: fix ide/proc interaction · 9a2239b1

由 Peter Zijlstra 提交于 12月 06, 2006

  rmmod/3080 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
   (proc_subdir_lock){--..}, at: [<c04a33b0>] remove_proc_entry+0x40/0x191

  and this task is already holding:
   (ide_lock){++..}, at: [<c05651a2>] ide_unregister_subdriver+0x39/0xc8
  which would create a new lock dependency:
   (ide_lock){++..} -> (proc_subdir_lock){--..}

  but this new dependency connects a hard-irq-safe lock:
   (ide_lock){++..}
  ... which became hard-irq-safe at:
    [<c043c458>] lock_acquire+0x4b/0x6b
    [<c06129d7>] _spin_lock_irqsave+0x22/0x32
    [<c0567870>] ide_intr+0x17/0x1a9
    [<c044eb31>] handle_IRQ_event+0x20/0x4d
    [<c044ebf2>] __do_IRQ+0x94/0xef
    [<c0406771>] do_IRQ+0x9e/0xbd

  to a hard-irq-unsafe lock:
   (proc_subdir_lock){--..}
  ... which became hard-irq-unsafe at:
  ...  [<c043c458>] lock_acquire+0x4b/0x6b
    [<c06126ab>] _spin_lock+0x19/0x28
    [<c04a32f2>] xlate_proc_name+0x1b/0x99
    [<c04a3547>] proc_create+0x46/0xdf
    [<c04a3642>] create_proc_entry+0x62/0xa5
    [<c07c1972>] proc_misc_init+0x1c/0x1d2
    [<c07c1844>] proc_root_init+0x4c/0xe9
    [<c07ad703>] start_kernel+0x294/0x3b3

Move ide_remove_proc_entries() out from under ide_lock; there is nothing
that indicates that this is needed.

In specific, the call to ide_add_proc_entries() is unprotected, and there
is nothing else in the file using the respective ->proc fields. Also the
lock order around destroy_proc_ide_interface() suggests this.

Alan sayeth:

  proc_ide_write_settings walks the setting list under ide_setting_sem, read
  ditto.  remove_proc_entry is doing proc side housekeeping.

  Looks fine to me, although that old code is such a mess anything could be
  going on.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

9a2239b1

[PATCH] via82cxxx: handle error condition properly · 23a1b2a7

由 Alan Cox 提交于 12月 06, 2006

Jeff noted that the via driver returned an error to an unsigned int in a
a case where errors are not permitted. Move the check down earlier so we
can handle it properly. Not as pretty but it works this way and avoids
hacking up ugly stuff in the legacy ide core.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

23a1b2a7

[PATCH] SysRq-X: show blocked tasks · e59e2ae2

由 Ingo Molnar 提交于 12月 06, 2006

Add SysRq-X support: show blocked (TASK_UNINTERRUPTIBLE) tasks only.

Useful for debugging IO stalls.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

e59e2ae2

[PATCH] SPI: improve sysfs compiler complaint handling · 89fc9a1a

由 Jeff Garzik 提交于 12月 06, 2006

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

89fc9a1a

[PATCH] RTC: handle sysfs errors · 91046a8a

由 Jeff Garzik 提交于 12月 06, 2006

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

91046a8a

[PATCH] PNP: handle sysfs errors · bfc7ee20

由 Jeff Garzik 提交于 12月 06, 2006

Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

bfc7ee20

[PATCH] I2O: more error checking · 3889b26b

由 Jeff Garzik 提交于 12月 06, 2006

i2o_scsi: handle sysfs failure

i2o_device:
 * convert i2o_device_add() to return integer error code
   rather than pointer.  Fortunately -nobody- checks the return code of
   this function, so changing has nil impact.
 * handle errors thrown by device_register()

More work in i2o_device remains.
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

3889b26b

[PATCH] ioremap balanced with iounmap for drivers/char/istallion.c · aa8a8d66

由 Amol Lad 提交于 12月 06, 2006

Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

aa8a8d66

[PATCH] ioremap balanced with iounmap for drivers/char/moxa.c · 41bdabbb

由 Amol Lad 提交于 12月 06, 2006

Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

41bdabbb

[PATCH] ioremap balanced with iounmap for drivers/char/rio/rio_linux.c · 86842654

由 Amol Lad 提交于 12月 06, 2006

Signed-off-by: NAmol Lad <amol@verismonetworks.com>
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

86842654

[PATCH] serial uartlite driver · 238b8721

由 Peter Korsgaard 提交于 12月 06, 2006

Add a driver for the Xilinx uartlite serial controller used in boards with
the PPC405 core in the Xilinx V2P/V4 fpgas.

The hardware is very simple (baudrate/start/stopbits fixed and no break
support).  See the datasheet for details:

	http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf

See http://thread.gmane.org/gmane.linux.serial/1237/ for the email thread.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NOlof Johansson <olof@lixom.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

238b8721

[PATCH] cciss: cleanup cciss_interrupt mode · 1ecb9c0f