We need to restore the %asi register properly.
For the kernel this means get_fs(), for user this
means ASI_PNF.

Also, NGcopy_to_user.S was including U3memcpy.S instead
of NGmemcpy.S, oops :-)
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since it can do things like BREAK and HUP, we implement
this as a serial uart driver.

This still needs interrupt probing code, as I haven't figured
out how interrupts will work or be probed for on SUN4V yet.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There was also a bug in sun4v_itlb_miss, it loaded the
MMU Fault Status base into %g3 instead of %g2.

This pointed out a fast path for TSB miss processing,
since we have %g2 with the MMU Fault Status base, we
can use that to quickly load up the PGD phys address.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is where the virtual address of the fault status
area belongs.

To set it up we don't make a hypervisor call, instead
we call OBP's SUNW,set-trap-table with the real address
of the fault status area as the second argument.  And
right before that call we write the virtual address into
ASI_SCRATCHPAD vaddr 0x0.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Function goes in %o5, args go in %o0 --> %o5.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For constructing hypervisor PCI TSB IDs.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add assembler file for PCI hypervisor calls.
Setup basic skeleton of SUN4V PCI controller driver.

Add 32-bit devhandle to PBM struct, as this is needed for
hypervisor calls.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Abstract out IOMMU operations so that we can have a different
set of calls on sun4v, which needs to do things through
hypervisor calls.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If there is a "cpuid" property, use that.  Else suck
it out of the top bits of the "reg" property.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Delete unused macros, and use fixed sized types in
sparc32 header.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we register a TSB with the hypervisor, so that it or hardware can
handle TLB misses and do the TSB walk for us, the hypervisor traps
down to these trap when it incurs a TSB miss.

Processing is simple, we load the missing virtual address and context,
and do a full page table walk.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For 'tlb_type'.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We look for "SUNW,sun4v" in the 'compatible' property
of the root OBP device tree node.

Protect every %ver register access, to make sure it is
not touched on sun4v, as %ver is hyperprivileged there.

Lock kernel TLB entries using hypervisor calls instead of
calls into OBP.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Technically the hypervisor call supports sending in a list
of all cpus to get the cross-call, but I only pass in one
cpu at a time for now.

The multi-cpu support is there, just ifdef'd out so it's easy to
enable or delete it later.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sun4v has 4 interrupt queues: cpu, device, resumable errors,
and non-resumable errors.  A set of head/tail offset pointers
help maintain a work queue in physical memory.  The entries
are 64-bytes in size.

Each queue is allocated then registered with the hypervisor
as we bring cpus up.

The two error queues each get a kernel side buffer that we
use to quickly empty the main interrupt queue before we
call up to C code to log the event and possibly take evasive
action.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Needs to occur before we enable PSTATE_IE in %pstate.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Also, correct TRAP_PER_CPU_FAULT_INFO define, it should be
0x40 not 0x20.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sun4v uses ASI_MMU instead of ASI_DMMU
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the expansion of __GET_CPUID() on SMP.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Happily we have no D-cache aliasing issues on these
chips, so the implementation is very straightforward.

Add a stub in bootup which will be where the patching
calls will be made for niagara/sun4v/hypervisor.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Things are a little tricky because, unlike sun4u, we have
to:

1) do a hypervisor trap to do the TLB load.
2) do the TSB lookup calculations by hand
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

V9 requires a write memory barrier before the instruction flush.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If we're just switching between different alternate global
sets, nop it out on sun4v.  Also, get rid of all of the
alternate global save/restore in the OBP CIF trampoline code.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They are totally unnecessary because:

1) Interrupts are already disabled when switch_to()
   runs.

2) We don't use hard-coded alternate globals any longer.

This found a case in rtrap, which still assumed alternate
global %g6 was current_thread_info(), and that is fixed
by this changeset as well.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of setting/clearing PSTATE_AG we have to change
the %gl register value on sun4v.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we save trap state onto the stack, the store buffer fills up
mid-way through and we stall for several cycles as the store buffer
trickles out to the L2 cache.  Meanwhile we can do some privileged
register reads and other calculations, essentially for free.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>