I found config FADS only in ppc/Kconfig. Bye bye relic.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The PIT code has been changed in order to suppport GENERIC_CLOCKEVENTS.
The priority of the PIT clocksource has been decreased in favor of the
DMA timer.

pit_cycles_per_jiffy become a constant (PIT_CYCLES_PER_JIFFY) because it
is known at compile time and does not change afterwards.
Signed-off-by: NBenedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/trace.c: In function 'tracing_generic_entry_update':
/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/trace.c:802: error: implicit declaration of function 'irqs_disabled_flags'
make[3]: *** [kernel/trace/trace.o] Error 1
/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/ftrace.c: In function 'ftrace_list_func':
/home/bigeasy/git/linux-2.6-ftrace/kernel/trace/ftrace.c:61: error: implicit declaration of function 'read_barrier_depends'
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

the ff1 and bitrev opcode appears in ISA C and ISA A+ what isn't
supported by all plattforms. The assembly optimization is automaticly
enabled if the compiler understand the required cpu keyword.
My m5235 seems to boot and run fine so far.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

with this printk() and other sched_clock() user use the more precise
timestamps. The highly optimized math is from arch/x86/kernel/tsc_32.c.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

do_set_rtc() isn't required because the work that is handled is
allready served if read_persistent_clock() & update_persistent_clock()
are implemented and CONFIG_GENERIC_CMOS_UPDATE is. sync_cmos_clock()
looks very familiar :)
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

This patch creates two functions do_set_rtc() and read_rtc_mmss()
based on allready available code.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

The old method is used when frame pointers are not available.
Also fix formating with CONFIG_KALLSYMS=n which eliminates \n.
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

This one could be used as a hrtimer.
Signed-off-by: NBenedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: NSebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Add a defconfig for the Freescale M5407C3 board.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Add a defconfig for the Freescale M5307C3 board.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Add a defconfig for the Freescale M5275EVB board.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Add a defconfig for the Freescale M5249EVB board.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

Remove the old example m68knommu defconfig. Create a configs directory
for specific board configurations. Make the m5208evb the default.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (82 commits)
  ipw2200: Call netif_*_queue() interfaces properly.
  netxen: Needs to include linux/vmalloc.h
  [netdrvr] atl1d: fix !CONFIG_PM build
  r6040: rework init_one error handling
  r6040: bump release number to 0.18
  r6040: handle RX fifo full and no descriptor interrupts
  r6040: change the default waiting time
  r6040: use definitions for magic values in descriptor status
  r6040: completely rework the RX path
  r6040: call napi_disable when puting down the interface and set lp->dev accordingly.
  mv643xx_eth: fix NETPOLL build
  r6040: rework the RX buffers allocation routine
  r6040: fix scheduling while atomic in r6040_tx_timeout
  r6040: fix null pointer access and tx timeouts
  r6040: prefix all functions with r6040
  rndis_host: support WM6 devices as modems
  at91_ether: use netstats in net_device structure
  sfc: Create one RX queue and interrupt per CPU package by default
  sfc: Use a separate workqueue for resets
  sfc: I2C adapter initialisation fixes
  ...

Stephen Rothwell points out that this file got deleted (on purpose) by
commit 640c1bce ("USB: delete airprime
driver"), but then almost immediately incorrectly resurrected by commit
95da310e ("usb_serial: API all change").

Delete it again.  If it comes back, we'll need to drive a stake through
its heart.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NGreg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: pass -m32 when building vmlinux.lds
  sparc: Fixes the DRM layer build on sparc.
  ide: merge <asm-sparc/ide_64.h> with <asm-sparc/ide_32.h>
  ide: <asm-sparc/ide_64.h>: use __raw_{read,write}w()
  ide: <asm-sparc/ide_32.h>: use __raw_{read,write}w()
  ide: <asm-sparc/ide_64.h>: use %r0 for outw_be()
  sparc64: Do not define BIO_VMERGE_BOUNDARY.

netif_carrier_{on,off}() handles starting and stopping packet
flow into the driver.  So there is no reason to invoke netif_stop_queue()
and netif_wake_queue() in response to link status events.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch reworks the error handling in r6040_init_one
in order not to leak resources and correcly unmap and release
PCI regions of the MAC. Also prefix printk's with the driver name
for clarity.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch bumps the release of the r6040 driver. There has been
quite some versions of it out there, but this one is the one
people should report bugs against.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch allows the MAC to handle the RX FIFO full
and no descriptor available interrupts. While we are at it
replace the TX interrupt with its corresponding definition.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch changes the default waiting time of a packet, which
along with our previous r6040_rx path, was causing huge delays
with another host (160 to 230 ms).
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Define all the descriptor status the MAC can set.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch completely reworks the RX path in order to be
more accurate about what is going on with the MAC.
We no longer read the error from the MLSR register instead read
the descriptor status register which reflects, the error per descriptor.
We now allocate skbs on the fly in r6040_rx, and we handle allocation
failure instead of simply dropping the packet. Remove the
rx_free_desc counter of r6040_private structure since we
allocate skbs in the RX path.

r6040_rx_buf_alloc is now removed and becomes unuseless.
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

We did not call napi_disabled when putting down the interface
which should be done. Finally initialize lp->dev when everything
is set.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Joseph Fannin <jfannin@gmail.com> and Takashi Iwai <tiwai@suse.de>
noticed that commit 073a345c
("mv643xx_eth: clarify irq masking and unmasking") broke the
mv643xx_eth build when NETPOLL is enabled, due to it not renaming
one instance of INT_CAUSE_EXT in mv643xx_eth_netpoll().  This patch
takes care of that instance as well.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: Joseph Fannin <jfannin@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Rework the RX buffers allocation function so that we do not
leak memory in the case we could not allocate skbs for the
RX path. Propagate the errors to the r6040_up function
where we call the RX buffers allocation function.

Also rename the r6040_alloc_txbufs function to
r6040_init_txbufs, to reflect what it really does.
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Add a helper function which only modifies R6040 MAC registers
use it when we timeout, and on adapter initialization. Fix
the scheduling while atomic but in the timeout routine due
to the reallocation of rx/tx buffers.
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch fixes a null pointer access in r6040_rx due
to lp->dev not being initialized.

Fix the TX timeouts, TX irq was not re-enabled on RX irq
Signed-Off-By: NJoerg Albert <jal2@gmx.de>
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Prefix all functions inside the r6040 driver with r6040 to
avoid namespace clashing.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This patch allows Windows Mobile 6 devices to be used for
tethering -- that is, used as modems.  It was requested by
AdamW in kernel bugzilla:

  http://bugzilla.kernel.org/show_bug.cgi?id=11119

and Mandriva kernel-discuss list.  It is tested and confirmed
to work by Peterl:

  http://forum.eeeuser.com/viewtopic.php?pid=323543#p323543

This patch is based on the patch in the above kernel bugzilla,
which is from the usb-rndis-lite tree.

[ dbrownell@users.sourceforge.net: misc fixes ]
Signed-off-by: NThomas Backlund <tmb@mandriva.org>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Use net_device_stats from net_device structure instead of local.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Tested-by: NMarc Pignat <marc.pignat@hevs.ch>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Using multiple cores in the same package to handle received traffic
does not appear to provide a performance benefit.  Therefore use CPU
topology information to count CPU packages and use that as the default
number of RX queues and interrupts.  We rely on interrupt balancing to
spread the interrupts across packages.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

This avoids deadlock in case a reset is triggered during self-test.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

As recommended by Jean Delvare:
- Increase timeout to 50 ms
- Leave adapter class clear so that unwanted drivers do not probe our bus
- Use strlcpy() for name initialisation
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>