Also fix the issue of the image being mirrored.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Refactor the code to unify how the sn9c101/102 and the sn9c103 bridge
are handled. Also move code which is the same for all sensors from
the per sensor init register settings to a central place.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The sn9c102 driver claims a number of usb-ids which are for cameras
with sensor types which it does not support. Also it claims a number
of usb-ids which do not exist at all (not present in the windows
drivers .inf files, not known by google).

This patch also fixes the conflict with the gspca_sonixj driver for the
0c45:60c0 and 0c45:60fb usb ids.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The et61x251 driver claims a whole list of usb id's, but it only has
one sensor "module" which does sensor detection based on usb id and that
only supports devices with the 102c:6251 usb id. Remove the usb-ids for
other devices as for those the driver will fail with an unable to determine
sensor type message anyways.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

We check for not streaming as a condition to abort waiting in dqbuf, so
when another thread does a streamoff we should wake the wq.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some applications (xawtv, qv4l2) mix read and mmap calls. Allow switching
from read mode back to mmap mode (by doing a reqbufs).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

gspca_dev->memory == GSPCA_MEMORY_NO implies gspca_dev->nframes == 0,
so there is no need to check for both in dev_poll. The check in
dev_read also is more complex then needed, as dqbuf which dev_read
calls already does all necessary checks. Moreover dqbuf is holding
the proper locks while checking where as dev_read itself is not.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Before this patch we were not setting the memory type to GSPCA_MEMORY_NO
when the buffers were released by the app doing a reqbufs 0. Nor would
the memory type be set to GSPCA_MEMORY_NO on device close, as capture_file
already is NULL on device close because of the reqbufs 0. This caused the
following problem:
-app1 does reqbufs USERPTR for 4 buffers
-app1 does reqbufs USERPTR for 0 buffers
-app2 tries to do reqbufs MMAP for 4 buffers
 fails because gspca_dev->memory still is USERPTR

Fixing this also allows an app to switch memory type's by unrequesting
the buffers and re-requesting them of a different type.

This patch also moves the setting of gspca_dev->frsz and gscpa_dev->memory
to after alloc_frame succeeding, so that they are not changed when allocating
fails.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove the no longer used / useful users variable, and with that gone
there also is no longer a need to take queue_lock in dev_open.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Before this patch dqbuf errors out on a failing user_copy (with user pointers)
before updating the buffer flags, causing a successsfully dequeued buffer
to still have the DONE flag, which means that it could no longer be
re-queueud (assuming the app somehow survives the segfault).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Before this patch vidioc_dqbuf is using its own read_lock, where as
other queue related functions use queue_lock. This means that dqbuf is
accessing several variables in a racy manor. The most important one
being fr_o, which may be changed from underneath dqbuf by vidioc_reqbufs
or vidioc_streamoff. Other variables which it accesses unprotected
are gspca_dev->memory, gspca_dev->streaming and gspca_dev->capt_file.

This patch fixes this by changing vidioc_dqbuf to also use the queue_lock.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The gspca_dev->streaming boolean is protected against multiple access
through gspca_dev->queue_lock everywhere except for 2 places. This patch
fixes this by bringing it under the lock in vidioc_streamoff. And by
removing the check for gspca_dev->streaming in gspca_disconnect,
the destroy_urbs call may be called multiple times (and is protected
by the usb_lock) and calling wake_up_interruptible can also always be done
safely.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

IF freq	for DVB-T 7 MHz	and 8 MHz was set slightly wrong. Due to that it
didn't worked at all (?) for 7 MHz channels and most likely performance
was dropped for 8 MHz channels.

That bug was pointed by few people during last two months. Thank you.

Trivial fix. Compile tested only due to lack of proper HW and signal.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Cc: Romolo Manfredini <romoloman@hotmail.com>
Cc: Alireza Moini <alireza.moini@silverbrookresearch.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The radio-gemtek-pci driver is for the same hardware as the radio-maxiradio
driver which uses the same GemTek PR103 and tea5757 combination and the two
drivers are identical. I chose the maxiradio over the gemtek-pci driver since
the maxiradio has support for mono/stereo detection.

Tested with my gemtek-pci card.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use the standard USA/Europe frequency range of 87-108 MHz instead of the
arbitrary 50-150 MHz.

Copied from the radio-gemtek-pci driver which supports the same hardware.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

vpif_display now uses .unlocked_ioctl instead of .ioctl.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Now uses .unlocked_ioctl instead of .ioctl.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NMurali Karicheri <mkaricheri@gmail.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Added functions to set and get custom DV timings.
Signed-off-by: NMats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- Added functions to set/get/query/enum DV presets for vpif_caputre and
  vpif_display.
- The format specification table is extended with all the DV formats
  supported by TVP7002.
Signed-off-by: NMats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

- The ch_params tables in vpif_capture.c and vpif_display.c are moved to a common
  table in vpif.c. Then it is easier to maintain the table.
- The field "fps" is removed from the struct vpif_channel_config_params because it
  is not used.
Signed-off-by: NMats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by : Murali Karicheri <mkaricheri@gmail.com>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following functions are added to the drivers:
    - vpif_g_chip_ident
    - vpif_dbg_g_register
    - vpif_dbg_s_register
    - vpif_log_status
Signed-off-by: NMats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Acked-by: NManjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement core-assisted locking in cpia2.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Convert saa7146 to use core-assisted locking.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since tda9875 is part of tvaudio this field no longer makes sense. Remove it.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

In commit 411674fd the tda9875 support was
added to tvaudio. This means that tda9875 is no longer used since mid-2009.

If there are out-of-tree users of this driver, then they can switch to tvaudio
instead.

The original commit message read as follows:

    This change allows bttv to use tvaudio for this device. Since this device
    has the same i2c address as the tda9874 we need to support both in the same
    tvaudio driver. This makes it possible for tvaudio to detect which chip is
    used. Originally the tda9875 was only available in the dedicated tda9875
    driver, but that makes life very hard for bttv since loading tvaudio might
    misdetect a tda9875 as a tda9874.

So there were good reasons for moving the tda9875 code into tvaudio.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This patch adds basic support for LM94 to the LM93 driver. LM94 specific
sensors and features are not supported.
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
Acked-by: NJean Delvare <khali@linux-fr.org>

The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This
patch implements a driver for that.
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: spi-devel-general@lists.sourceforge.net
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1960/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

While building latest Linus git, I hit the following:

    CC [M]  drivers/staging/bcm/Qos.o
  drivers/staging/bcm/Qos.c: In function ‘PruneQueue’:
  drivers/staging/bcm/Qos.c:367: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’
  drivers/staging/bcm/Qos.c: In function ‘flush_all_queues’:
  drivers/staging/bcm/Qos.c:416: error: ‘struct netdev_queue’ has no member named ‘tx_dropped’
  make[5]: *** [drivers/staging/bcm/Qos.o] Error 1
  make[4]: *** [drivers/staging/bcm] Error 2
  make[3]: *** [drivers/staging] Error 2

As well as:

    CC [M]  drivers/staging/bcm/Transmit.o
  drivers/staging/bcm/Transmit.c: In function ‘SetupNextSend’:
  drivers/staging/bcm/Transmit.c:163: error: ‘struct netdev_queue’ has no member named ‘tx_bytes’
  drivers/staging/bcm/Transmit.c:164: error: ‘struct netdev_queue’ has no member named ‘tx_packets’
  make[2]: *** [drivers/staging/bcm/Transmit.o] Error 1

tx_dropped/tx_bytes_tx_packets were removed in commit 1ac9ad13.  This patch
converts bcm to use net_device_stats instead of netdev_queue.
Acked-by: NStephen Hemminger <shemminger@vyatta.com>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NAndres Salomon <dilinger@queued.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Without this fix reloading of the driver is impossible.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

This patch fixes the mtdpart bug which allows users reading OOB past the
end of the partition. This happens because 'part_read_oob()' allows reading
multiple OOB areas in one go, and mtdparts does not validate the OOB
length in the request.

Although there is such check in 'nand_do_read_oob()' in nand_base.c, but
it checks that we do not read past the flash chip, not the partition,
because in nand_base.c we work with the whole chip (e.g., mtd->size
in nand_base.c is the size of the whole chip). So this check cannot
be done correctly in nand_base.c and should be instead done in mtdparts.c.

This problem was reported by Jason Liu <r64343@freescale.com> and reproduced
with nandsim:

$ modprobe nandsim first_id_byte=0x20 second_id_byte=0xaa third_id_byte=0x00 \
                   fourth_id_byte=0x15 parts=0x400,0x400
$ modprobe nandsim mtd_oobtest.ko dev=0
$ dmesg
= snip =
mtd_oobtest: attempting to read past end of device
mtd_oobtest: an error is expected...
mtd_oobtest: error: read past end of device
= snip =
mtd_oobtest: finished with 2 errors
Reported-by: NJason Liu <liu.h.jason@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Building error for smbfs:

drivers/staging/smbfs/dir.c:286: error: static declaration of 'smbfs_dentry_operations' follows non-static declaration
drivers/staging/smbfs/proto.h:42: error: previous declaration of 'smbfs_dentry_operations' was here
drivers/staging/smbfs/dir.c:294: error: static declaration of 'smbfs_dentry_operations_case' follows non-static declaration
drivers/staging/smbfs/proto.h:41: error: previous declaration of 'smbfs_dentry_operations_case' was here
make[3]: *** [drivers/staging/smbfs/dir.o] Error 1
make[2]: *** [drivers/staging/smbfs] Error 2
make[1]: *** [drivers/staging] Error 2
make[1]: *** Waiting for unfinished jobs....

Fix it by removing static keywords
Signed-off-by: NYang Ruirui <ruirui.r.yang@tieto.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* ib_wq is added, which is used as the common workqueue for infiniband
  instead of the system workqueue.  All system workqueue usages
  including flush_scheduled_work() callers are converted to use and
  flush ib_wq.

* cancel_delayed_work() + flush_scheduled_work() converted to
  cancel_delayed_work_sync().

* qib_wq is removed and ib_wq is used instead.

This is to prepare for deprecation of flush_scheduled_work().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

First, we were calling mc_stop() at the top of the function
which turns off all MC (memory controller) clients,
then checking if the GPU is idle.  If it was idle we
returned without re-enabling the MC clients which would
lead to a blank screen, etc.  This patch checks if the
GPU is idle before calling mc_stop().

Second, if the reset failed, we were returning without
re-enabling the MC clients.  This patch re-enables
the MC clients before returning regardless of whether
the reset was successful or not.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use the common one for all asics.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Switching to pcie gen2 causes problems on some
boards.  Add a module option to turn it on/off.

There are gen2 compatability issues with some
motherboards it seems.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=33027Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The switch to separate BAR and channel address spaces made the fbcon memory
address calculation incorrect on NV50+ boards, this commit fixes that.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>