Merge tag 'kvm-s390-next-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fix and feature for 5.15

- enable interpretion of specification exceptions
- fix a vcpu_idx vs vcpu_id mixup

Commit f4e61f0c ("x86/kvm: Fix broken irq restoration in kvm_wait")
replaced "local_irq_restore() when IRQ enabled" with "local_irq_enable()
when IRQ enabled" to suppress a warnning.

Although there is no similar debugging warnning for doing local_irq_enable()
when IRQ enabled as doing local_irq_restore() in the same IRQ situation.  But
doing local_irq_enable() when IRQ enabled is no less broken as doing
local_irq_restore() and we'd better avoid it.

Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NLai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20210814035129.154242-1-jiangshanlai@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a new stat that counts the number of times a remote TLB flush is
requested, regardless of whether it kicks vCPUs out of guest mode. This
allows us to look at how often flushes are initiated.

Unlike remote_tlb_flush, this one applies to ARM's instruction-set-based
TLB flush implementation, so apply it there too.
Original-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NJing Zhang <jingzhangos@google.com>
Message-Id: <20210817002639.3856694-1-jingzhangos@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Don't export KVM's MMU notifier count helpers, under no circumstance
should any downstream module, including x86's vendor code, have a
legitimate reason to piggyback KVM's MMU notifier logic.  E.g in the x86
case, only KVM's MMU should be elevating the notifier count, and that
code is always built into the core kvm.ko module.

Fixes: edb298c6 ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210902175951.1387989-1-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move "lpage_disallowed_link" out of the first 64 bytes, i.e. out of the
first cache line, of kvm_mmu_page so that "spt" and to a lesser extent
"gfns" land in the first cache line.  "lpage_disallowed_link" is accessed
relatively infrequently compared to "spt", which is accessed any time KVM
is walking and/or manipulating the shadow page tables.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210901221023.1303578-4-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move "tdp_mmu_page" into the 1-byte void left by the recently removed
"mmio_cached" so that it resides in the first 64 bytes of kvm_mmu_page,
i.e. in the same cache line as the most commonly accessed fields.

Don't bother wrapping tdp_mmu_page in CONFIG_X86_64, including the field in
32-bit builds doesn't affect the size of kvm_mmu_page, and a future patch
can always wrap the field in the unlikely event KVM gains a 1-byte flag
that is 32-bit specific.

Note, the size of kvm_mmu_page is also unchanged on CONFIG_X86_64=y due
to it previously sharing an 8-byte chunk with write_flooding_count.

No functional change intended.
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210901221023.1303578-3-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Revert a misguided illegal GPA check when "translating" a non-nested GPA.
The check is woefully incomplete as it does not fill in @exception as
expected by all callers, which leads to KVM attempting to inject a bogus
exception, potentially exposing kernel stack information in the process.

 WARNING: CPU: 0 PID: 8469 at arch/x86/kvm/x86.c:525 exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
 CPU: 1 PID: 8469 Comm: syz-executor531 Not tainted 5.14.0-rc7-syzkaller #0
 RIP: 0010:exception_type+0x98/0xb0 arch/x86/kvm/x86.c:525
 Call Trace:
  x86_emulate_instruction+0xef6/0x1460 arch/x86/kvm/x86.c:7853
  kvm_mmu_page_fault+0x2f0/0x1810 arch/x86/kvm/mmu/mmu.c:5199
  handle_ept_misconfig+0xdf/0x3e0 arch/x86/kvm/vmx/vmx.c:5336
  __vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6021 [inline]
  vmx_handle_exit+0x336/0x1800 arch/x86/kvm/vmx/vmx.c:6038
  vcpu_enter_guest+0x2a1c/0x4430 arch/x86/kvm/x86.c:9712
  vcpu_run arch/x86/kvm/x86.c:9779 [inline]
  kvm_arch_vcpu_ioctl_run+0x47d/0x1b20 arch/x86/kvm/x86.c:10010
  kvm_vcpu_ioctl+0x49e/0xe50 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3652

The bug has escaped notice because practically speaking the GPA check is
useless.  The GPA check in question only comes into play when KVM is
walking guest page tables (or "translating" CR3), and KVM already handles
illegal GPA checks by setting reserved bits in rsvd_bits_mask for each
PxE, or in the case of CR3 for loading PTDPTRs, manually checks for an
illegal CR3.  This particular failure doesn't hit the existing reserved
bits checks because syzbot sets guest.MAXPHYADDR=1, and IA32 architecture
simply doesn't allow for such an absurd MAXPHYADDR, e.g. 32-bit paging
doesn't define any reserved PA bits checks, which KVM emulates by only
incorporating the reserved PA bits into the "high" bits, i.e. bits 63:32.

Simply remove the bogus check.  There is zero meaningful value and no
architectural justification for supporting guest.MAXPHYADDR < 32, and
properly filling the exception would introduce non-trivial complexity.

This reverts commit ec7771ab.

Fixes: ec7771ab ("KVM: x86: mmu: Add guest physical address check in translate_gpa()")
Cc: stable@vger.kernel.org
Reported-by: syzbot+200c08e88ae818f849ce@syzkaller.appspotmail.com
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210831164224.1119728-2-seanjc@google.com>
Reviewed-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

After reverting and restoring the fast tlb invalidation patch series,
the mmio_cached is not removed. Hence a unused field is left in
kvm_mmu_page.

Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: NJia He <justin.he@arm.com>
Message-Id: <20210830145336.27183-1-justin.he@arm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Support for 710 VCPUs was tested by Red Hat since RHEL-8.4,
so increase KVM_SOFT_MAX_VCPUS to 710.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210903211600.2002377-4-ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Increase KVM_MAX_VCPUS to 1024, so we can test larger VMs.

I'm not changing KVM_SOFT_MAX_VCPUS yet because I'm afraid it
might involve complicated questions around the meaning of
"supported" and "recommended" in the upstream tree.
KVM_SOFT_MAX_VCPUS will be changed in a separate patch.

For reference, visible effects of this change are:
- KVM_CAP_MAX_VCPUS will now return 1024 (of course)
- Default value for CPUID[HYPERV_CPUID_IMPLEMENT_LIMITS (00x40000005)].EAX
  will now be 1024
- KVM_MAX_VCPU_ID will change from 1151 to 4096
- Size of struct kvm will increase from 19328 to 22272 bytes
  (in x86_64)
- Size of struct kvm_ioapic will increase from 1780 to 5084 bytes
  (in x86_64)
- Bitmap stack variables that will grow:
  - At kvm_hv_flush_tlb() kvm_hv_send_ipi(),
    vp_bitmap[] and vcpu_bitmap[] will now be 128 bytes long
  - vcpu_bitmap at bioapic_write_indirect() will be 128 bytes long
    once patch "KVM: x86: Fix stack-out-of-bounds memory access
    from ioapic_write_indirect()" is applied
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210903211600.2002377-3-ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Instead of requiring KVM_MAX_VCPU_ID to be manually increased
every time we increase KVM_MAX_VCPUS, set it to 4*KVM_MAX_VCPUS.
This should be enough for CPU topologies where Cores-per-Package
and Packages-per-Socket are not powers of 2.

In practice, this increases KVM_MAX_VCPU_ID from 1023 to 1152.
The only side effect of this change is making some fields in
struct kvm_ioapic larger, increasing the struct size from 1628 to
1780 bytes (in x86_64).
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20210903211600.2002377-2-ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If we are emulating an invalid guest state, we don't have a correct
exit reason, and thus we shouldn't do anything in this function.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210826095750.1650467-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 95b5a48c ("KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fn", 2019-06-18)
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Include pml5_root in the set of special roots if and only if the host,
and thus NPT, is using 5-level paging.  mmu_alloc_special_roots() expects
special roots to be allocated as a bundle, i.e. they're either all valid
or all NULL.  But for pml5_root, that expectation only holds true if the
host uses 5-level paging, which causes KVM to WARN about pml5_root being
NULL when the other special roots are valid.

The silver lining of 4-level vs. 5-level NPT being tied to the host
kernel's paging level is that KVM's shadow root level is constant; unlike
VMX's EPT, KVM can't choose 4-level NPT based on guest.MAXPHYADDR.  That
means KVM can still expect pml5_root to be bundled with the other special
roots, it just needs to be conditioned on the shadow root level.

Fixes: cb0f722a ("KVM: x86/mmu: Support shadowing NPT when 5-level paging is enabled in host")
Reported-by: NMaxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: NMaxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210824005824.205536-1-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

While in practice vcpu->vcpu_idx ==  vcpu->vcp_id is often true, it may
not always be, and we must not rely on this. Reason is that KVM decides
the vcpu_idx, userspace decides the vcpu_id, thus the two might not
match.

Currently kvm->arch.idle_mask is indexed by vcpu_id, which implies
that code like
for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
                vcpu = kvm_get_vcpu(kvm, vcpu_id);
		do_stuff(vcpu);
}
is not legit. Reason is that kvm_get_vcpu expects an vcpu_idx, not an
vcpu_id.  The trouble is, we do actually use kvm->arch.idle_mask like
this. To fix this problem we have two options. Either use
kvm_get_vcpu_by_id(vcpu_id), which would loop to find the right vcpu_id,
or switch to indexing via vcpu_idx. The latter is preferable for obvious
reasons.

Let us make switch from indexing kvm->arch.idle_mask by vcpu_id to
indexing it by vcpu_idx.  To keep gisa_int.kicked_mask indexed by the
same index as idle_mask lets make the same change for it as well.

Fixes: 1ee0bc55 ("KVM: s390: get rid of local_int array")
Signed-off-by: NHalil Pasic <pasic@linux.ibm.com>
Reviewed-by: NChristian Bornträger <borntraeger@de.ibm.com>
Reviewed-by: NClaudio Imbrenda <imbrenda@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 3.15+
Link: https://lore.kernel.org/r/20210827125429.1912577-1-pasic@linux.ibm.comSigned-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When this feature is enabled the hardware is free to interpret
specification exceptions generated by the guest, instead of causing
program interruption interceptions.

This benefits (test) programs that generate a lot of specification
exceptions (roughly 4x increase in exceptions/sec).

Interceptions will occur as before if ICTL_PINT is set,
i.e. if guest debug is enabled.

There is no indication if this feature is available or not and the
hardware is free to interpret or not. So we can simply set this bit and
if the hardware ignores it we fall back to intercept 8 handling.
Signed-off-by: NJanis Schoetterl-Glausch <scgl@linux.ibm.com>
Link: https://lore.kernel.org/linux-s390/20210706114714.3936825-1-scgl@linux.ibm.com/Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When the 5-level page table is enabled on host OS, the nested page table
for guest VMs must use 5-level as well. Update get_npt_level() function
to reflect this requirement. In the meanwhile, remove the code that
prevents kvm-amd driver from being loaded when 5-level page table is
detected.
Signed-off-by: NWei Huang <wei.huang2@amd.com>
Message-Id: <20210818165549.3771014-4-wei.huang2@amd.com>
[Tweak condition as suggested by Sean. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When the 5-level page table CPU flag is set in the host, but the guest
has CR4.LA57=0 (including the case of a 32-bit guest), the top level of
the shadow NPT page tables will be fixed, consisting of one pointer to
a lower-level table and 511 non-present entries.  Extend the existing
code that creates the fixed PML4 or PDP table, to provide a fixed PML5
table if needed.

This is not needed on EPT because the number of layers in the tables
is specified in the EPTP instead of depending on the host CR4.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NWei Huang <wei.huang2@amd.com>
Message-Id: <20210818165549.3771014-3-wei.huang2@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

AMD future CPUs will require a 5-level NPT if host CR4.LA57 is set.
To prevent kvm_mmu_get_tdp_level() from incorrectly changing NPT level
on behalf of CPUs, add a new parameter in kvm_configure_mmu() to force
a fixed TDP level.
Signed-off-by: NWei Huang <wei.huang2@amd.com>
Message-Id: <20210818165549.3771014-2-wei.huang2@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This change started as a way to make kvm_mmu_hugepage_adjust a bit simpler,
but it does fix two bugs as well.

One bug is in zapping collapsible PTEs.  If a large page size is
disallowed but not all of them, kvm_mmu_max_mapping_level will return the
host mapping level and the small PTEs will be zapped up to that level.
However, if e.g. 1GB are prohibited, we can still zap 4KB mapping and
preserve the 2MB ones. This can happen for example when NX huge pages
are in use.

The second would happen when userspace backs guest memory
with a 1gb hugepage but only assign a subset of the page to
the guest.  1gb pages would be disallowed by the memslot, but
not 2mb.  kvm_mmu_max_mapping_level() would fall through to the
host_pfn_mapping_level() logic, see the 1gb hugepage, and map the whole
thing into the guest.

Fixes: 2f57b705 ("KVM: x86/mmu: Persist gfn_lpage_is_disallowed() to max_level")
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Modify debug_regs test to create a pending interrupt
and see that it is blocked when single stepping is done
with KVM_GUESTDBG_BLOCKIRQ
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210811122927.900604-7-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

KVM_GUESTDBG_BLOCKIRQ will allow KVM to block all interrupts
while running.

This change is mostly intended for more robust single stepping
of the guest and it has the following benefits when enabled:

* Resuming from a breakpoint is much more reliable.
  When resuming execution from a breakpoint, with interrupts enabled,
  more often than not, KVM would inject an interrupt and make the CPU
  jump immediately to the interrupt handler and eventually return to
  the breakpoint, to trigger it again.

  From the user point of view it looks like the CPU never executed a
  single instruction and in some cases that can even prevent forward
  progress, for example, when the breakpoint is placed by an automated
  script (e.g lx-symbols), which does something in response to the
  breakpoint and then continues the guest automatically.
  If the script execution takes enough time for another interrupt to
  arrive, the guest will be stuck on the same breakpoint RIP forever.

* Normal single stepping is much more predictable, since it won't
  land the debugger into an interrupt handler.

* RFLAGS.TF has less chance to be leaked to the guest:

  We set that flag behind the guest's back to do single stepping
  but if single step lands us into an interrupt/exception handler
  it will be leaked to the guest in the form of being pushed
  to the stack.
  This doesn't completely eliminate this problem as exceptions
  can still happen, but at least this reduces the chances
  of this happening.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210811122927.900604-6-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Split the check for having a vmexit handler to svm_check_exit_valid,
and make svm_handle_invalid_exit only handle a vmexit that is
already not valid.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210811122927.900604-2-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop @shared from tdp_mmu_link_page() and hardcode it to work for
mmu_lock being held for read.  The helper has exactly one caller and
in all likelihood will only ever have exactly one caller.  Even if KVM
adds a path to install translations without an initiating page fault,
odds are very, very good that the path will just be a wrapper to the
"page fault" handler (both SNP and TDX RFCs propose patches to do
exactly that).

No functional change intended.

Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: NSean Christopherson <seanjc@google.com>
Message-Id: <20210810224554.2978735-3-seanjc@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Existing KVM code tracks the number of large pages regardless of their
sizes. Therefore, when large page of 1GB (or larger) is adopted, the
information becomes less useful because lpages counts a mix of 1G and 2M
pages.

So remove the lpages since it is easy for user space to aggregate the info.
Instead, provide a comprehensive page stats of all sizes from 4K to 512G.
Suggested-by: NBen Gardon <bgardon@google.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Reviewed-by: NBen Gardon <bgardon@google.com>
Signed-off-by: NMingwei Zhang <mizhang@google.com>
Cc: Jing Zhang <jingzhangos@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Message-Id: <20210803044607.599629-4-mizhang@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Factor in whether or not the old/new SPTEs are shadow-present when
adjusting the large page stats in the TDP MMU.  A modified MMIO SPTE can
toggle the page size bit, as bit 7 is used to store the MMIO generation,
i.e. is_large_pte() can get a false positive when called on a MMIO SPTE.
Ditto for nuking SPTEs with REMOVED_SPTE, which sets bit 7 in its magic
value.

Opportunistically move the logic below the check to verify at least one
of the old/new SPTEs is shadow present.

Use is/was_leaf even though is/was_present would suffice.  The code
generation is roughly equivalent since all flags need to be computed
prior to the code in question, and using the *_leaf flags will minimize
the diff in a future enhancement to account all pages, i.e. will change
the check to "is_leaf != was_leaf".
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Reviewed-by: NBen Gardon <bgardon@google.com>

Fixes: 1699f65c ("kvm/x86: Fix 'lpages' kvm stat for TDM MMU")
Cc: stable@vger.kernel.org
Signed-off-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NMingwei Zhang <mizhang@google.com>
Message-Id: <20210803044607.599629-3-mizhang@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop an unnecessary is_shadow_present_pte() check when updating the rmaps
after installing a non-MMIO SPTE.  set_spte() is used only to create
shadow-present SPTEs, e.g. MMIO SPTEs are handled early on, mmu_set_spte()
runs with mmu_lock held for write, i.e. the SPTE can't be zapped between
writing the SPTE and updating the rmaps.

Opportunistically combine the "new SPTE" logic for large pages and rmaps.

No functional change intended.
Suggested-by: NBen Gardon <bgardon@google.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Reviewed-by: NBen Gardon <bgardon@google.com>
Reviewed-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NMingwei Zhang <mizhang@google.com>
Message-Id: <20210803044607.599629-2-mizhang@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add three log histogram stats to record the distribution of time spent
on successful polling, failed polling and VCPU wait.
halt_poll_success_hist: Distribution of spent time for a successful poll.
halt_poll_fail_hist: Distribution of spent time for a failed poll.
halt_wait_hist: Distribution of time a VCPU has spent on waiting.
Signed-off-by: NJing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-6-jingzhangos@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add simple stats halt_wait_ns to record the time a VCPU has spent on
waiting for all architectures (not just powerpc).
Signed-off-by: NJing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-5-jingzhangos@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The bucket_size field should be non-zero for linear histogram stats and
should be zero for other stats types.
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NJing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-4-jingzhangos@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add documentations for linear and logarithmic histogram statistics.
Signed-off-by: NJing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-3-jingzhangos@google.com>
[Small changes to the phrasing. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add new types of KVM stats, linear and logarithmic histogram.
Histogram are very useful for observing the value distribution
of time or size related stats.
Signed-off-by: NJing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-2-jingzhangos@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

APIC base relocation is not supported anyway and won't work
correctly so just drop the code that handles it and keep AVIC
MMIO bar at the default APIC base.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-17-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently it is possible to have the following scenario:

1. AVIC is disabled by svm_refresh_apicv_exec_ctrl
2. svm_vcpu_blocking calls avic_vcpu_put which does nothing
3. svm_vcpu_unblocking enables the AVIC (due to KVM_REQ_APICV_UPDATE)
   and then calls avic_vcpu_load
4. warning is triggered in avic_vcpu_load since
   AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK was never cleared

While it is possible to just remove the warning, it seems to be more robust
to fully disable/enable AVIC in svm_refresh_apicv_exec_ctrl by calling the
avic_vcpu_load/avic_vcpu_put
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-16-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

No functional change intended.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-15-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Since AVIC can be inhibited and uninhibited rapidly it is possible that
we have nothing to do by the time the svm_refresh_apicv_exec_ctrl
is called.

Detect and avoid this, which will be useful when we will start calling
avic_vcpu_load/avic_vcpu_put when the avic inhibition state changes.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-14-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that kvm_request_apicv_update doesn't need to drop the kvm->srcu lock,
we can call kvm_request_apicv_update directly.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210810205251.424103-13-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

APICV_INHIBIT_REASON_HYPERV is currently unconditionally forced upon
SynIC activation as SynIC's AutoEOI is incompatible with APICv/AVIC. It is,
however, possible to track whether the feature was actually used by the
guest and only inhibit APICv/AVIC when needed.

TLFS suggests a dedicated 'HV_DEPRECATING_AEOI_RECOMMENDED' flag to let
Windows know that AutoEOI feature should be avoided. While it's up to
KVM userspace to set the flag, KVM can help a bit by exposing global
APICv/AVIC enablement.

Maxim:
   - always set HV_DEPRECATING_AEOI_RECOMMENDED in kvm_get_hv_cpuid,
     since this feature can be used regardless of AVIC

Paolo:
   - use arch.apicv_update_lock to protect the hv->synic_auto_eoi_used
     instead of atomic ops
Signed-off-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-12-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It is never a good idea to enter a guest on a vCPU when the
AVIC inhibition state doesn't match the enablement of
the AVIC on the vCPU.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-11-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Currently on SVM, the kvm_request_apicv_update toggles the APICv
memslot without doing any synchronization.

If there is a mismatch between that memslot state and the AVIC state,
on one of the vCPUs, an APIC mmio access can be lost:

For example:

VCPU0: enable the APIC_ACCESS_PAGE_PRIVATE_MEMSLOT
VCPU1: access an APIC mmio register.

Since AVIC is still disabled on VCPU1, the access will not be intercepted
by it, and neither will it cause MMIO fault, but rather it will just be
read/written from/to the dummy page mapped into the
APIC_ACCESS_PAGE_PRIVATE_MEMSLOT.

Fix that by adding a lock guarding the AVIC state changes, and carefully
order the operations of kvm_request_apicv_update to avoid this race:

1. Take the lock
2. Send KVM_REQ_APICV_UPDATE
3. Update the apic inhibit reason
4. Release the lock

This ensures that at (2) all vCPUs are kicked out of the guest mode,
but don't yet see the new avic state.
Then only after (4) all other vCPUs can update their AVIC state and resume.
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-10-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Thanks to the former patches, it is now possible to keep the APICv
memslot always enabled, and it will be invisible to the guest
when it is inhibited

This code is based on a suggestion from Sean Christopherson:
https://lkml.org/lkml/2021/7/19/2970Suggested-by: NSean Christopherson <seanjc@google.com>
Signed-off-by: NMaxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-9-mlevitsk@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>