destroy_workqueue() drains the workqueue before proceeding with
destruction.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

This will be used by the filesystem for "umount -f".
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Avoid a copy into the "skip buffer".
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

All gotos to "more" are conditioned on con->state == OPEN, but the only
thing "more" does is opening the socket if con->state == PREOPEN.  Kill
that label and rename "more_kvec" to "more".
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>
Reviewed-by: NJason Dillaman <dillaman@redhat.com>

Add proper error handling for osd_req_op_cls_init() to replace
BUG_ON statement when failing from memory allocation.
Signed-off-by: NChengguang Xu <cgxu519@gmx.com>
Reviewed-by: NIlya Dryomov <idryomov@gmail.com>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

I don't know where this value comes from (probably a copy and paste and
paste and paste ...).
Let's use standard values which are a bit greater.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411aSigned-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After commit f6cc9c05, the following conf is broken (note that the
default loopback mtu is 65536, ie IP_MAX_MTU + 1):

$ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev lo
add tunnel "gre0" failed: Invalid argument
$ ip l a type dummy
$ ip l s dummy1 up
$ ip l s dummy1 mtu 65535
$ ip tunnel add gre1 mode gre local 10.125.0.1 remote 10.125.0.2 dev dummy1
add tunnel "gre0" failed: Invalid argument

dev_set_mtu() doesn't allow to set a mtu which is too large.
First, let's cap the mtu returned by ip_tunnel_bind_dev(). Second, remove
the magic value 0xFFF8 and use IP_MAX_MTU instead.
0xFFF8 seems to be there for ages, I don't know why this value was used.

With a recent kernel, it's also possible to set a mtu > IP_MAX_MTU:
$ ip l s dummy1 mtu 66000
After that patch, it's also possible to bind an ip tunnel on that kind of
interface.

CC: Petr Machata <petrm@mellanox.com>
CC: Ido Schimmel <idosch@mellanox.com>
Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/netdev-vger-cvs.git/commit/?id=e5afd356a411a
Fixes: f6cc9c05 ("ip_tunnel: Emit events for post-register MTU changes")
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

(resend for properly queueing in patchwork)

kcm_clone() creates kernel socket, which does not take net counter.
Thus, the net may die before the socket is completely destructed,
i.e. kcm_exit_net() is executed before kcm_done().

Reported-by: syzbot+5f1a04e374a635efc426@syzkaller.appspotmail.com
Signed-off-by: NKirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch reorders the error cases in showing the XPS configuration so
that we hold off on memory allocation until after we have verified that we
can support XPS on a given ring.

Fixes: 184c449f ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With CONFIG_CC_STACKPROTECTOR enabled the kernel panics as below when
parsing a NCSI_CMD_PKG_INFO command:

[  150.149711] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08
[  150.149711]
[  150.159919] CPU: 0 PID: 1301 Comm: ncsi-netlink Not tainted 4.13.16-468cbec6d2c91239332cb91b1f0a73aafcb6f0c6 #1
[  150.170004] Hardware name: Generic DT based system
[  150.174852] [<80109930>] (unwind_backtrace) from [<80106bc4>] (show_stack+0x20/0x24)
[  150.182641] [<80106bc4>] (show_stack) from [<805d36e4>] (dump_stack+0x20/0x28)
[  150.189888] [<805d36e4>] (dump_stack) from [<801163ac>] (panic+0xdc/0x278)
[  150.196780] [<801163ac>] (panic) from [<801162cc>] (__stack_chk_fail+0x20/0x24)
[  150.204111] [<801162cc>] (__stack_chk_fail) from [<805cff08>] (ncsi_pkg_info_all_nl+0x244/0x258)
[  150.212912] [<805cff08>] (ncsi_pkg_info_all_nl) from [<804f939c>] (genl_lock_dumpit+0x3c/0x54)
[  150.221535] [<804f939c>] (genl_lock_dumpit) from [<804f873c>] (netlink_dump+0xf8/0x284)
[  150.229550] [<804f873c>] (netlink_dump) from [<804f8d44>] (__netlink_dump_start+0x124/0x17c)
[  150.237992] [<804f8d44>] (__netlink_dump_start) from [<804f9880>] (genl_rcv_msg+0x1c8/0x3d4)
[  150.246440] [<804f9880>] (genl_rcv_msg) from [<804f9174>] (netlink_rcv_skb+0xd8/0x134)
[  150.254361] [<804f9174>] (netlink_rcv_skb) from [<804f96a4>] (genl_rcv+0x30/0x44)
[  150.261850] [<804f96a4>] (genl_rcv) from [<804f7790>] (netlink_unicast+0x198/0x234)
[  150.269511] [<804f7790>] (netlink_unicast) from [<804f7ffc>] (netlink_sendmsg+0x368/0x3b0)
[  150.277783] [<804f7ffc>] (netlink_sendmsg) from [<804abea4>] (sock_sendmsg+0x24/0x34)
[  150.285625] [<804abea4>] (sock_sendmsg) from [<804ac1dc>] (___sys_sendmsg+0x244/0x260)
[  150.293556] [<804ac1dc>] (___sys_sendmsg) from [<804ad98c>] (__sys_sendmsg+0x5c/0x9c)
[  150.301400] [<804ad98c>] (__sys_sendmsg) from [<804ad9e4>] (SyS_sendmsg+0x18/0x1c)
[  150.308984] [<804ad9e4>] (SyS_sendmsg) from [<80102640>] (ret_fast_syscall+0x0/0x3c)
[  150.316743] ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: 805cff08

This turns out to be because the attrs array in ncsi_pkg_info_all_nl()
is initialised to a length of NCSI_ATTR_MAX which is the maximum
attribute number, not the number of attributes.

Fixes: 955dc68c ("net/ncsi: Add generic netlink family")
Signed-off-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When we fail to modify a rule, we incorrectly release the idr handle
of the unmodified old rule.

Fix that by checking if we need to release it.

Fixes: fe2502e4 ("net_sched: remove cls_flower idr on failure")
Reported-by: NVlad Buslov <vladbu@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We may derference an invalid pointer in the error path of
xfrm_bundle_create(). Fix this by returning this error
pointer directly instead of assigning it to xdst0.

Fixes: 45b018be ("ipsec: Create and use new helpers for dst child access.")
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

seg6_do_srh_encap and seg6_do_srh_inline can possibly do an
out-of-bounds access when adding the SRH to the packet. This no longer
happen when expanding the skb not only by the size of the SRH (+
outer IPv6 header), but also by skb->mac_len.

[   53.793056] BUG: KASAN: use-after-free in seg6_do_srh_encap+0x284/0x620
[   53.794564] Write of size 14 at addr ffff88011975ecfa by task ping/674

[   53.796665] CPU: 0 PID: 674 Comm: ping Not tainted 4.17.0-rc3-ARCH+ #90
[   53.796670] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.11.0-20171110_100015-anatol 04/01/2014
[   53.796673] Call Trace:
[   53.796679]  <IRQ>
[   53.796689]  dump_stack+0x71/0xab
[   53.796700]  print_address_description+0x6a/0x270
[   53.796707]  kasan_report+0x258/0x380
[   53.796715]  ? seg6_do_srh_encap+0x284/0x620
[   53.796722]  memmove+0x34/0x50
[   53.796730]  seg6_do_srh_encap+0x284/0x620
[   53.796741]  ? seg6_do_srh+0x29b/0x360
[   53.796747]  seg6_do_srh+0x29b/0x360
[   53.796756]  seg6_input+0x2e/0x2e0
[   53.796765]  lwtunnel_input+0x93/0xd0
[   53.796774]  ipv6_rcv+0x690/0x920
[   53.796783]  ? ip6_input+0x170/0x170
[   53.796791]  ? eth_gro_receive+0x2d0/0x2d0
[   53.796800]  ? ip6_input+0x170/0x170
[   53.796809]  __netif_receive_skb_core+0xcc0/0x13f0
[   53.796820]  ? netdev_info+0x110/0x110
[   53.796827]  ? napi_complete_done+0xb6/0x170
[   53.796834]  ? e1000_clean+0x6da/0xf70
[   53.796845]  ? process_backlog+0x129/0x2a0
[   53.796853]  process_backlog+0x129/0x2a0
[   53.796862]  net_rx_action+0x211/0x5c0
[   53.796870]  ? napi_complete_done+0x170/0x170
[   53.796887]  ? run_rebalance_domains+0x11f/0x150
[   53.796891]  __do_softirq+0x10e/0x39e
[   53.796894]  do_softirq_own_stack+0x2a/0x40
[   53.796895]  </IRQ>
[   53.796898]  do_softirq.part.16+0x54/0x60
[   53.796900]  __local_bh_enable_ip+0x5b/0x60
[   53.796903]  ip6_finish_output2+0x416/0x9f0
[   53.796906]  ? ip6_dst_lookup_flow+0x110/0x110
[   53.796909]  ? ip6_sk_dst_lookup_flow+0x390/0x390
[   53.796911]  ? __rcu_read_unlock+0x66/0x80
[   53.796913]  ? ip6_mtu+0x44/0xf0
[   53.796916]  ? ip6_output+0xfc/0x220
[   53.796918]  ip6_output+0xfc/0x220
[   53.796921]  ? ip6_finish_output+0x2b0/0x2b0
[   53.796923]  ? memcpy+0x34/0x50
[   53.796926]  ip6_send_skb+0x43/0xc0
[   53.796929]  rawv6_sendmsg+0x1216/0x1530
[   53.796932]  ? __orc_find+0x6b/0xc0
[   53.796934]  ? rawv6_rcv_skb+0x160/0x160
[   53.796937]  ? __rcu_read_unlock+0x66/0x80
[   53.796939]  ? __rcu_read_unlock+0x66/0x80
[   53.796942]  ? is_bpf_text_address+0x1e/0x30
[   53.796944]  ? kernel_text_address+0xec/0x100
[   53.796946]  ? __kernel_text_address+0xe/0x30
[   53.796948]  ? unwind_get_return_address+0x2f/0x50
[   53.796950]  ? __save_stack_trace+0x92/0x100
[   53.796954]  ? save_stack+0x89/0xb0
[   53.796956]  ? kasan_kmalloc+0xa0/0xd0
[   53.796958]  ? kmem_cache_alloc+0xd2/0x1f0
[   53.796961]  ? prepare_creds+0x23/0x160
[   53.796963]  ? __x64_sys_capset+0x252/0x3e0
[   53.796966]  ? do_syscall_64+0x69/0x160
[   53.796968]  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   53.796971]  ? __alloc_pages_nodemask+0x170/0x380
[   53.796973]  ? __alloc_pages_slowpath+0x12c0/0x12c0
[   53.796977]  ? tty_vhangup+0x20/0x20
[   53.796979]  ? policy_nodemask+0x1a/0x90
[   53.796982]  ? __mod_node_page_state+0x8d/0xa0
[   53.796986]  ? __check_object_size+0xe7/0x240
[   53.796989]  ? __sys_sendto+0x229/0x290
[   53.796991]  ? rawv6_rcv_skb+0x160/0x160
[   53.796993]  __sys_sendto+0x229/0x290
[   53.796996]  ? __ia32_sys_getpeername+0x50/0x50
[   53.796999]  ? commit_creds+0x2de/0x520
[   53.797002]  ? security_capset+0x57/0x70
[   53.797004]  ? __x64_sys_capset+0x29f/0x3e0
[   53.797007]  ? __x64_sys_rt_sigsuspend+0xe0/0xe0
[   53.797011]  ? __do_page_fault+0x664/0x770
[   53.797014]  __x64_sys_sendto+0x74/0x90
[   53.797017]  do_syscall_64+0x69/0x160
[   53.797019]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   53.797022] RIP: 0033:0x7f43b7a6714a
[   53.797023] RSP: 002b:00007ffd891bd368 EFLAGS: 00000246 ORIG_RAX:
000000000000002c
[   53.797026] RAX: ffffffffffffffda RBX: 00000000006129c0 RCX: 00007f43b7a6714a
[   53.797028] RDX: 0000000000000040 RSI: 00000000006129c0 RDI: 0000000000000004
[   53.797029] RBP: 00007ffd891be640 R08: 0000000000610940 R09: 000000000000001c
[   53.797030] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[   53.797032] R13: 000000000060e6a0 R14: 0000000000008004 R15: 000000000040b661

[   53.797171] Allocated by task 642:
[   53.797460]  kasan_kmalloc+0xa0/0xd0
[   53.797463]  kmem_cache_alloc+0xd2/0x1f0
[   53.797465]  getname_flags+0x40/0x210
[   53.797467]  user_path_at_empty+0x1d/0x40
[   53.797469]  do_faccessat+0x12a/0x320
[   53.797471]  do_syscall_64+0x69/0x160
[   53.797473]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   53.797607] Freed by task 642:
[   53.797869]  __kasan_slab_free+0x130/0x180
[   53.797871]  kmem_cache_free+0xa8/0x230
[   53.797872]  filename_lookup+0x15b/0x230
[   53.797874]  do_faccessat+0x12a/0x320
[   53.797876]  do_syscall_64+0x69/0x160
[   53.797878]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[   53.798014] The buggy address belongs to the object at ffff88011975e600
                which belongs to the cache names_cache of size 4096
[   53.799043] The buggy address is located 1786 bytes inside of
                4096-byte region [ffff88011975e600, ffff88011975f600)
[   53.800013] The buggy address belongs to the page:
[   53.800414] page:ffffea000465d600 count:1 mapcount:0
mapping:0000000000000000 index:0x0 compound_mapcount: 0
[   53.801259] flags: 0x17fff0000008100(slab|head)
[   53.801640] raw: 017fff0000008100 0000000000000000 0000000000000000
0000000100070007
[   53.803147] raw: dead000000000100 dead000000000200 ffff88011b185a40
0000000000000000
[   53.803787] page dumped because: kasan: bad access detected

[   53.804384] Memory state around the buggy address:
[   53.804788]  ffff88011975eb80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.805384]  ffff88011975ec00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.805979] >ffff88011975ec80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.806577]                                                                 ^
[   53.807165]  ffff88011975ed00: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.807762]  ffff88011975ed80: fb fb fb fb fb fb fb fb fb fb fb fb
fb fb fb fb
[   53.808356] ==================================================================
[   53.808949] Disabling lock debugging due to kernel taint

Fixes: 6c8702c6 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: NDavid Lebrun <dlebrun@google.com>
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a chain is updated, a counter can be attached. if so,
the nft_counters_enabled should be increased.

test commands:

   %nft add table ip filter
   %nft add chain ip filter input { type filter hook input priority 4\; }
   %iptables-compat -Z input
   %nft delete chain ip filter input

we can see below messages.

[  286.443720] jump label: negative count!
[  286.448278] WARNING: CPU: 0 PID: 1459 at kernel/jump_label.c:197 __static_key_slow_dec_cpuslocked+0x6f/0xf0
[  286.449144] Modules linked in: nf_tables nfnetlink ip_tables x_tables
[  286.449144] CPU: 0 PID: 1459 Comm: nft Tainted: G        W         4.17.0-rc2+ #12
[  286.449144] RIP: 0010:__static_key_slow_dec_cpuslocked+0x6f/0xf0
[  286.449144] RSP: 0018:ffff88010e5176f0 EFLAGS: 00010286
[  286.449144] RAX: 000000000000001b RBX: ffffffffc0179500 RCX: ffffffffb8a82522
[  286.449144] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88011b7e5eac
[  286.449144] RBP: 0000000000000000 R08: ffffed00236fce5c R09: ffffed00236fce5b
[  286.449144] R10: ffffffffc0179503 R11: ffffed00236fce5c R12: 0000000000000000
[  286.449144] R13: ffff88011a28e448 R14: ffff88011a28e470 R15: dffffc0000000000
[  286.449144] FS:  00007f0384328700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[  286.449144] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  286.449144] CR2: 00007f038394bf10 CR3: 0000000104a86000 CR4: 00000000001006f0
[  286.449144] Call Trace:
[  286.449144]  static_key_slow_dec+0x6a/0x70
[  286.449144]  nf_tables_chain_destroy+0x19d/0x210 [nf_tables]
[  286.449144]  nf_tables_commit+0x1891/0x1c50 [nf_tables]
[  286.449144]  nfnetlink_rcv+0x1148/0x13d0 [nfnetlink]
[ ... ]
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

The table field in nft_obj_filter is not an array. In order to check
tablename, we should check if the pointer is set.

Test commands:

   %nft add table ip filter
   %nft add counter ip filter ct1
   %nft reset counters

Splat looks like:

[  306.510504] kasan: CONFIG_KASAN_INLINE enabled
[  306.516184] kasan: GPF could be caused by NULL-ptr deref or user memory access
[  306.524775] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  306.528284] Modules linked in: nft_objref nft_counter nf_tables nfnetlink ip_tables x_tables
[  306.528284] CPU: 0 PID: 1488 Comm: nft Not tainted 4.17.0-rc4+ #17
[  306.528284] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[  306.528284] RIP: 0010:nf_tables_dump_obj+0x52c/0xa70 [nf_tables]
[  306.528284] RSP: 0018:ffff8800b6cb7520 EFLAGS: 00010246
[  306.528284] RAX: 0000000000000000 RBX: ffff8800b6c49820 RCX: 0000000000000000
[  306.528284] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffed0016d96e9a
[  306.528284] RBP: ffff8800b6cb75c0 R08: ffffed00236fce7c R09: ffffed00236fce7b
[  306.528284] R10: ffffffff9f6241e8 R11: ffffed00236fce7c R12: ffff880111365108
[  306.528284] R13: 0000000000000000 R14: ffff8800b6c49860 R15: ffff8800b6c49860
[  306.528284] FS:  00007f838b007700(0000) GS:ffff88011b600000(0000) knlGS:0000000000000000
[  306.528284] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  306.528284] CR2: 00007ffeafabcf78 CR3: 00000000b6cbe000 CR4: 00000000001006f0
[  306.528284] Call Trace:
[  306.528284]  netlink_dump+0x470/0xa20
[  306.528284]  __netlink_dump_start+0x5ae/0x690
[  306.528284]  ? nf_tables_getobj+0x1b3/0x740 [nf_tables]
[  306.528284]  nf_tables_getobj+0x2f5/0x740 [nf_tables]
[  306.528284]  ? nft_obj_notify+0x100/0x100 [nf_tables]
[  306.528284]  ? nf_tables_getobj+0x740/0x740 [nf_tables]
[  306.528284]  ? nf_tables_dump_flowtable_done+0x70/0x70 [nf_tables]
[  306.528284]  ? nft_obj_notify+0x100/0x100 [nf_tables]
[  306.528284]  nfnetlink_rcv_msg+0x8ff/0x932 [nfnetlink]
[  306.528284]  ? nfnetlink_rcv_msg+0x216/0x932 [nfnetlink]
[  306.528284]  netlink_rcv_skb+0x1c9/0x2f0
[  306.528284]  ? nfnetlink_bind+0x1d0/0x1d0 [nfnetlink]
[  306.528284]  ? debug_check_no_locks_freed+0x270/0x270
[  306.528284]  ? netlink_ack+0x7a0/0x7a0
[  306.528284]  ? ns_capable_common+0x6e/0x110
[ ... ]

Fixes: e46abbcc ("netfilter: nf_tables: Allow table names of up to 255 chars")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

This patch fixes the following splat.

[118709.054937] BUG: using smp_processor_id() in preemptible [00000000] code: test/1571
[118709.054970] caller is nft_update_chain_stats.isra.4+0x53/0x97 [nf_tables]
[118709.054980] CPU: 2 PID: 1571 Comm: test Not tainted 4.17.0-rc6+ #335
[...]
[118709.054992] Call Trace:
[118709.055011]  dump_stack+0x5f/0x86
[118709.055026]  check_preemption_disabled+0xd4/0xe4
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Several subsystems depend on INFINIBAND_ADDR_TRANS, which in turn depends
on INFINIBAND. However, when with CONFIG_INIFIBAND=m, this leads to a
link error when another driver using it is built-in. The
INFINIBAND_ADDR_TRANS dependency is insufficient here as this is
a 'bool' symbol that does not force anything to be a module in turn.

fs/cifs/smbdirect.o: In function `smbd_disconnect_rdma_work':
smbdirect.c:(.text+0x1e4): undefined reference to `rdma_disconnect'
net/9p/trans_rdma.o: In function `rdma_request':
trans_rdma.c:(.text+0x7bc): undefined reference to `rdma_disconnect'
net/9p/trans_rdma.o: In function `rdma_destroy_trans':
trans_rdma.c:(.text+0x830): undefined reference to `ib_destroy_qp'
trans_rdma.c:(.text+0x858): undefined reference to `ib_dealloc_pd'

Fixes: 9533b292 ("IB: remove redundant INFINIBAND kconfig dependencies")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGreg Thelen <gthelen@google.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

A precondition check in ip_recv_error triggered on an otherwise benign
race. Remove the warning.

The warning triggers when passing an ipv6 socket to this ipv4 error
handling function. RaceFuzzer was able to trigger it due to a race
in setsockopt IPV6_ADDRFORM.

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_socket->ops = &inet_dgram_ops;

  ---
  CPU1
    sk->sk_prot->recvmsg
      udp_recvmsg
        ip_recv_error
          WARN_ON_ONCE(sk->sk_family == AF_INET6);

  ---
  CPU0
    do_ipv6_setsockopt
      sk->sk_family = PF_INET;

This socket option converts a v6 socket that is connected to a v4 peer
to an v4 socket. It updates the socket on the fly, changing fields in
sk as well as other structs. This is inherently non-atomic. It races
with the lockless udp_recvmsg path.

No other code makes an assumption that these fields are updated
atomically. It is benign here, too, as ip_recv_error cares only about
the protocol of the skbs enqueued on the error queue, for which
sk_family is not a precise predictor (thanks to another isue with
IPV6_ADDRFORM).

Link: http://lkml.kernel.org/r/20180518120826.GA19515@dragonet.kaist.ac.kr
Fixes: 7ce875e5 ("ipv4: warn once on passing AF_INET6 socket to ip_recv_error")
Reported-by: NDaeRyong Jeong <threeearcat@gmail.com>
Suggested-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When dealing with ingress rule on a netdev, if we did fine through the
conventional path, there's no need to continue into the egdev route,
and we can stop right there.

Not doing so may cause a 2nd rule to be added by the cls api layer
with the ingress being the egdev.

For example, under sriov switchdev scheme, a user rule of VFR A --> VFR B
will end up with two HW rules (1) VF A --> VF B and (2) uplink --> VF B

Fixes: 208c0f4b ('net: sched: use tc_setup_cb_call to call per-block callbacks')
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit b84bbaf7 ("packet: in packet_snd start writing at link
layer allocation") ensures that packet_snd always starts writing
the link layer header in reserved headroom allocated for this
purpose.

This is needed because packets may be shorter than hard_header_len,
in which case the space up to hard_header_len may be zeroed. But
that necessary padding is not accounted for in skb->len.

The fix, however, is buggy. It calls skb_push, which grows skb->len
when moving skb->data back. But in this case packet length should not
change.

Instead, call skb_reserve, which moves both skb->data and skb->tail
back, without changing length.

Fixes: b84bbaf7 ("packet: in packet_snd start writing at link layer allocation")
Reported-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recent patch forgot to remove nla_data(), upsetting syzkaller a bit.

BUG: KASAN: slab-out-of-bounds in nla_strlcpy+0x13d/0x150 lib/nlattr.c:314
Read of size 1 at addr ffff8801ad1f4fdd by task syz-executor189/4509

CPU: 1 PID: 4509 Comm: syz-executor189 Not tainted 4.17.0-rc6+ #62
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
 nla_strlcpy+0x13d/0x150 lib/nlattr.c:314
 nfnl_acct_new+0x574/0xc50 net/netfilter/nfnetlink_acct.c:118
 nfnetlink_rcv_msg+0xdb5/0xff0 net/netfilter/nfnetlink.c:212
 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2448
 nfnetlink_rcv+0x1fe/0x1ba0 net/netfilter/nfnetlink.c:513
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x58b/0x740 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x9f0/0xfa0 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:639
 sock_write_iter+0x35a/0x5a0 net/socket.c:908
 call_write_iter include/linux/fs.h:1784 [inline]
 new_sync_write fs/read_write.c:474 [inline]
 __vfs_write+0x64d/0x960 fs/read_write.c:487
 vfs_write+0x1f8/0x560 fs/read_write.c:549
 ksys_write+0xf9/0x250 fs/read_write.c:598
 __do_sys_write fs/read_write.c:610 [inline]
 __se_sys_write fs/read_write.c:607 [inline]
 __x64_sys_write+0x73/0xb0 fs/read_write.c:607

Fixes: 4e09fc87 ("netfilter: prefer nla_strlcpy for dealing with NLA_STRING attributes")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NFlorian Westphal <fw@strlen.de>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Signed-off-by: NRoopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

syzkaller reports for buffer overflow for interface name
when starting sync daemons [1]

What we do is that we copy user structure into larger stack
buffer but later we search NUL past the stack buffer.
The same happens for sched_name when adding/editing virtual server.

We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN
being used as size in include/uapi/linux/ip_vs.h, so they
include the space for NUL.

As using strlcpy is wrong for unsafe source, replace it with
strscpy and add checks to return EINVAL if source string is not
NUL-terminated. The incomplete strlcpy fix comes from 2.6.13.

For the netlink interface reduce the len parameter for
IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME,
so that we get proper EINVAL.

[1]
kernel BUG at lib/string.c:1052!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
    (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051
RSP: 0018:ffff8801c976f800 EFLAGS: 00010282
RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000
RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6
RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0
R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20
R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b
FS:  00007fd99f75e700(0000) GS:ffff8801daf00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  strlen include/linux/string.h:270 [inline]
  strlcpy include/linux/string.h:293 [inline]
  do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388
  nf_sockopt net/netfilter/nf_sockopt.c:106 [inline]
  nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115
  ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253
  udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487
  ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917
  tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057
  sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046
  __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
  __do_sys_setsockopt net/socket.c:1914 [inline]
  __se_sys_setsockopt net/socket.c:1911 [inline]
  __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
  do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
  entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x447369
RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369
RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000
R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0
R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001
Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb
de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90
90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56
RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800

Reported-and-tested-by: syzbot+aac887f77319868646df@syzkaller.appspotmail.com
Fixes: e4ff6751 ("ipvs: add sync_maxlen parameter for the sync daemon")
Fixes: 4da62fc7 ("[IPVS]: Fix for overflows")
Signed-off-by: NJulian Anastasov <ja@ssi.bg>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Credit calculations for the packet ratelimiting are not correct, as per
the applied ratelimit of 25/second and burst 8, a total of 33 packets
should have been accepted.  This is true in iptables(33) but not in
nftables (~65). For packet ratelimiting, use:

	div_u64(limit->nsecs, limit->rate) * limit->burst;

to calculate credit, just like in iptables' xt_limit does.

Moreover, use default burst in iptables, users are expecting similar
behaviour.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

In the nft_meta_set_eval, nftrace value is dereferenced as u32 from sreg.
But correct type is u8. so that sometimes incorrect value is dereferenced.

Steps to reproduce:

   %nft add table ip filter
   %nft add chain ip filter input { type filter hook input priority 4\; }
   %nft add rule ip filter input nftrace set 0
   %nft monitor

Sometimes, we can see trace messages.

   trace id 16767227 ip filter input packet: iif "enp2s0"
   ether saddr xx:xx:xx:xx:xx:xx ether daddr xx:xx:xx:xx:xx:xx
   ip saddr 192.168.0.1 ip daddr 255.255.255.255 ip dscp cs0
   ip ecn not-ect ip
   trace id 16767227 ip filter input rule nftrace set 0 (verdict continue)
   trace id 16767227 ip filter input verdict continue
   trace id 16767227 ip filter input
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

commit 8fb472c0 ("ipmr: improve hash scalability")
added a call to rhltable_init() without checking its return value.

This problem was then later copied to IPv6 and factorized in commit
0bbbf0e7 ("ipmr, ip6mr: Unite creation of new mr_table")

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 31552 Comm: syz-executor7 Not tainted 4.17.0-rc5+ #60
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rht_key_hashfn include/linux/rhashtable.h:277 [inline]
RIP: 0010:__rhashtable_lookup include/linux/rhashtable.h:630 [inline]
RIP: 0010:rhltable_lookup include/linux/rhashtable.h:716 [inline]
RIP: 0010:mr_mfc_find_parent+0x2ad/0xbb0 net/ipv4/ipmr_base.c:63
RSP: 0018:ffff8801826aef70 EFLAGS: 00010203
RAX: 0000000000000001 RBX: 0000000000000001 RCX: ffffc90001ea0000
RDX: 0000000000000079 RSI: ffffffff8661e859 RDI: 000000000000000c
RBP: ffff8801826af1c0 R08: ffff8801b2212000 R09: ffffed003b5e46c2
R10: ffffed003b5e46c2 R11: ffff8801daf23613 R12: dffffc0000000000
R13: ffff8801826af198 R14: ffff8801cf8225c0 R15: ffff8801826af658
FS:  00007ff7fa732700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000003ffffff9c CR3: 00000001b0210000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 ip6mr_cache_find_parent net/ipv6/ip6mr.c:981 [inline]
 ip6mr_mfc_delete+0x1fe/0x6b0 net/ipv6/ip6mr.c:1221
 ip6_mroute_setsockopt+0x15c6/0x1d70 net/ipv6/ip6mr.c:1698
 do_ipv6_setsockopt.isra.9+0x422/0x4660 net/ipv6/ipv6_sockglue.c:163
 ipv6_setsockopt+0xbd/0x170 net/ipv6/ipv6_sockglue.c:922
 rawv6_setsockopt+0x59/0x140 net/ipv6/raw.c:1060
 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3039
 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903
 __do_sys_setsockopt net/socket.c:1914 [inline]
 __se_sys_setsockopt net/socket.c:1911 [inline]
 __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 8fb472c0 ("ipmr: improve hash scalability")
Fixes: 0bbbf0e7 ("ipmr, ip6mr: Unite creation of new mr_table")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Yuval Mintz <yuvalm@mellanox.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Syzbot reported the use-after-free in timer_is_static_object() [1].

This can happen because the structure for the rto timer (ccid2_hc_tx_sock)
is removed in dccp_disconnect(), and ccid2_hc_tx_rto_expire() can be
called after that.

The report [1] is similar to the one in commit 120e9dab ("dccp:
defer ccid_hc_tx_delete() at dismantle time"). And the fix is the same,
delay freeing ccid2_hc_tx_sock structure, so that it is freed in
dccp_sk_destruct().

[1]

==================================================================
BUG: KASAN: use-after-free in timer_is_static_object+0x80/0x90
kernel/time/timer.c:607
Read of size 8 at addr ffff8801bebb5118 by task syz-executor2/25299

CPU: 1 PID: 25299 Comm: syz-executor2 Not tainted 4.17.0-rc5+ #54
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  <IRQ>
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x1b9/0x294 lib/dump_stack.c:113
  print_address_description+0x6c/0x20b mm/kasan/report.c:256
  kasan_report_error mm/kasan/report.c:354 [inline]
  kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
  __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
  timer_is_static_object+0x80/0x90 kernel/time/timer.c:607
  debug_object_activate+0x2d9/0x670 lib/debugobjects.c:508
  debug_timer_activate kernel/time/timer.c:709 [inline]
  debug_activate kernel/time/timer.c:764 [inline]
  __mod_timer kernel/time/timer.c:1041 [inline]
  mod_timer+0x4d3/0x13b0 kernel/time/timer.c:1102
  sk_reset_timer+0x22/0x60 net/core/sock.c:2742
  ccid2_hc_tx_rto_expire+0x587/0x680 net/dccp/ccids/ccid2.c:147
  call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
  expire_timers kernel/time/timer.c:1363 [inline]
  __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
  run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
  invoke_softirq kernel/softirq.c:365 [inline]
  irq_exit+0x1d1/0x200 kernel/softirq.c:405
  exiting_irq arch/x86/include/asm/apic.h:525 [inline]
  smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
  apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
  </IRQ>
...
Allocated by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
  kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
  kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
  ccid_new+0x25b/0x3e0 net/dccp/ccid.c:151
  dccp_hdlr_ccid+0x27/0x150 net/dccp/feat.c:44
  __dccp_feat_activate+0x184/0x270 net/dccp/feat.c:344
  dccp_feat_activate_values+0x3a7/0x819 net/dccp/feat.c:1538
  dccp_create_openreq_child+0x472/0x610 net/dccp/minisocks.c:128
  dccp_v4_request_recv_sock+0x12c/0xca0 net/dccp/ipv4.c:408
  dccp_v6_request_recv_sock+0x125d/0x1f10 net/dccp/ipv6.c:415
  dccp_check_req+0x455/0x6a0 net/dccp/minisocks.c:197
  dccp_v4_rcv+0x7b8/0x1f3f net/dccp/ipv4.c:841
  ip_local_deliver_finish+0x2e3/0xd80 net/ipv4/ip_input.c:215
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_local_deliver+0x1e1/0x720 net/ipv4/ip_input.c:256
  dst_input include/net/dst.h:450 [inline]
  ip_rcv_finish+0x81b/0x2200 net/ipv4/ip_input.c:396
  NF_HOOK include/linux/netfilter.h:288 [inline]
  ip_rcv+0xb70/0x143d net/ipv4/ip_input.c:492
  __netif_receive_skb_core+0x26f5/0x3630 net/core/dev.c:4592
  __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4657
  process_backlog+0x219/0x760 net/core/dev.c:5337
  napi_poll net/core/dev.c:5735 [inline]
  net_rx_action+0x7b7/0x1930 net/core/dev.c:5801
  __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285

Freed by task 25374:
  save_stack+0x43/0xd0 mm/kasan/kasan.c:448
  set_track mm/kasan/kasan.c:460 [inline]
  __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
  kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
  __cache_free mm/slab.c:3498 [inline]
  kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
  ccid_hc_tx_delete+0xc3/0x100 net/dccp/ccid.c:190
  dccp_disconnect+0x130/0xc66 net/dccp/proto.c:286
  dccp_close+0x3bc/0xe60 net/dccp/proto.c:1045
  inet_release+0x104/0x1f0 net/ipv4/af_inet.c:427
  inet6_release+0x50/0x70 net/ipv6/af_inet6.c:460
  sock_release+0x96/0x1b0 net/socket.c:594
  sock_close+0x16/0x20 net/socket.c:1149
  __fput+0x34d/0x890 fs/file_table.c:209
  ____fput+0x15/0x20 fs/file_table.c:243
  task_work_run+0x1e4/0x290 kernel/task_work.c:113
  tracehook_notify_resume include/linux/tracehook.h:191 [inline]
  exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166
  prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
  syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
  do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801bebb4cc0
  which belongs to the cache ccid2_hc_tx_sock of size 1240
The buggy address is located 1112 bytes inside of
  1240-byte region [ffff8801bebb4cc0, ffff8801bebb5198)
The buggy address belongs to the page:
page:ffffea0006faed00 count:1 mapcount:0 mapping:ffff8801bebb41c0
index:0xffff8801bebb5240 compound_mapcount: 0
flags: 0x2fffc0000008100(slab|head)
raw: 02fffc0000008100 ffff8801bebb41c0 ffff8801bebb5240 0000000100000003
raw: ffff8801cdba3138 ffffea0007634120 ffff8801cdbaab40 0000000000000000
page dumped because: kasan: bad access detected
...
==================================================================

Reported-by: syzbot+5d47e9ec91a6f15dbd6f@syzkaller.appspotmail.com
Signed-off-by: NAlexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now sctp uses inet_dgram_connect as its proto_ops .connect, and the flags
param can't be passed into its proto .connect where this flags is really
needed.

sctp works around it by getting flags from socket file in __sctp_connect.
It works for connecting from userspace, as inherently the user sock has
socket file and it passes f_flags as the flags param into the proto_ops
.connect.

However, the sock created by sock_create_kern doesn't have a socket file,
and it passes the flags (like O_NONBLOCK) by using the flags param in
kernel_connect, which calls proto_ops .connect later.

So to fix it, this patch defines a new proto_ops .connect for sctp,
sctp_inet_connect, which calls __sctp_connect() directly with this
flags param. After this, the sctp's proto .connect can be removed.

Note that sctp_inet_connect doesn't need to do some checks that are not
needed for sctp, which makes thing better than with inet_dgram_connect.
Suggested-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some drivers may call this function when regdb is not initialized yet,
so we need to make sure regdb is valid before trying to access it.

Make sure regdb is initialized before trying to access it in
reg_query_regdb_wmm() and query_regdb().
Reported-by: NEric Biggers <ebiggers3@gmail.com>
Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Currently ip6gre and ip6erspan share single metadata mode device,
using 'collect_md_tun'.  Thus, when doing:
  ip link add dev ip6gre11 type ip6gretap external
  ip link add dev ip6erspan12 type ip6erspan external
  RTNETLINK answers: File exists
simply fails due to the 2nd tries to create the same collect_md_tun.

The patch fixes it by adding a separate collect md tunnel device
for the ip6erspan, 'collect_md_tun_erspan'.  As a result, a couple
of places need to refactor/split up in order to distinguish ip6gre
and ip6erspan.

First, move the collect_md check at ip6gre_tunnel_{unlink,link} and
create separate function {ip6gre,ip6ersapn}_tunnel_{link_md,unlink_md}.
Then before link/unlink, make sure the link_md/unlink_md is called.
Finally, a separate ndo_uninit is created for ip6erspan.  Tested it
using the samples/bpf/test_tunnel_bpf.sh.

Fixes: ef7baf5e ("ip6_gre: add ip6 erspan collect_md mode")
Signed-off-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Hangbin reported an Oops triggered by the syzkaller qdisc rules:

 kasan: GPF could be caused by NULL-ptr deref or user memory access
 general protection fault: 0000 [#1] SMP KASAN PTI
 Modules linked in: sch_red
 CPU: 0 PID: 28699 Comm: syz-executor5 Not tainted 4.17.0-rc4.kcov #1
 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
 RIP: 0010:qdisc_hash_add+0x26/0xa0
 RSP: 0018:ffff8800589cf470 EFLAGS: 00010203
 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff824ad971
 RDX: 0000000000000007 RSI: ffffc9000ce9f000 RDI: 000000000000003c
 RBP: 0000000000000001 R08: ffffed000b139ea2 R09: ffff8800589cf4f0
 R10: ffff8800589cf50f R11: ffffed000b139ea2 R12: ffff880054019fc0
 R13: ffff880054019fb4 R14: ffff88005c0af600 R15: ffff880054019fb0
 FS:  00007fa6edcb1700(0000) GS:ffff88005ce00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000020000740 CR3: 000000000fc16000 CR4: 00000000000006f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  red_change+0x2d2/0xed0 [sch_red]
  qdisc_create+0x57e/0xef0
  tc_modify_qdisc+0x47f/0x14e0
  rtnetlink_rcv_msg+0x6a8/0x920
  netlink_rcv_skb+0x2a2/0x3c0
  netlink_unicast+0x511/0x740
  netlink_sendmsg+0x825/0xc30
  sock_sendmsg+0xc5/0x100
  ___sys_sendmsg+0x778/0x8e0
  __sys_sendmsg+0xf5/0x1b0
  do_syscall_64+0xbd/0x3b0
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x450869
 RSP: 002b:00007fa6edcb0c48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 00007fa6edcb16b4 RCX: 0000000000450869
 RDX: 0000000000000000 RSI: 00000000200000c0 RDI: 0000000000000013
 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
 R13: 0000000000008778 R14: 0000000000702838 R15: 00007fa6edcb1700
 Code: e9 0b fe ff ff 0f 1f 44 00 00 55 53 48 89 fb 89 f5 e8 3f 07 f3 fe 48 8d 7b 3c 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 51
 RIP: qdisc_hash_add+0x26/0xa0 RSP: ffff8800589cf470

When a red qdisc is updated with a 0 limit, the child qdisc is left
unmodified, no additional scheduler is created in red_change(),
the 'child' local variable is rightfully NULL and must not add it
to the hash table.

This change addresses the above issue moving qdisc_hash_add() right
after the child qdisc creation. It additionally removes unneeded checks
for noop_qdisc.
Reported-by: NHangbin Liu <liuhangbin@gmail.com>
Fixes: 49b49971 ("net: sched: make default fifo qdiscs appear in the dump")
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We must not call sock_diag_has_destroy_listeners(sk) on a socket
that has no reference on net structure.

BUG: KASAN: use-after-free in sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline]
BUG: KASAN: use-after-free in __sk_free+0x329/0x340 net/core/sock.c:1609
Read of size 8 at addr ffff88018a02e3a0 by task swapper/1/0

CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.17.0-rc5+ #54
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1b9/0x294 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
 sock_diag_has_destroy_listeners include/linux/sock_diag.h:75 [inline]
 __sk_free+0x329/0x340 net/core/sock.c:1609
 sk_free+0x42/0x50 net/core/sock.c:1623
 sock_put include/net/sock.h:1664 [inline]
 reqsk_free include/net/request_sock.h:116 [inline]
 reqsk_put include/net/request_sock.h:124 [inline]
 inet_csk_reqsk_queue_drop_and_put net/ipv4/inet_connection_sock.c:672 [inline]
 reqsk_timer_handler+0xe27/0x10e0 net/ipv4/inet_connection_sock.c:739
 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326
 expire_timers kernel/time/timer.c:1363 [inline]
 __run_timers+0x79e/0xc50 kernel/time/timer.c:1666
 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692
 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:285
 invoke_softirq kernel/softirq.c:365 [inline]
 irq_exit+0x1d1/0x200 kernel/softirq.c:405
 exiting_irq arch/x86/include/asm/apic.h:525 [inline]
 smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863
 </IRQ>
RIP: 0010:native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:54
RSP: 0018:ffff8801d9ae7c38 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13
RAX: dffffc0000000000 RBX: 1ffff1003b35cf8a RCX: 0000000000000000
RDX: 1ffffffff11a30d0 RSI: 0000000000000001 RDI: ffffffff88d18680
RBP: ffff8801d9ae7c38 R08: ffffed003b5e46c3 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001
R13: ffff8801d9ae7cf0 R14: ffffffff897bef20 R15: 0000000000000000
 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline]
 default_idle+0xc2/0x440 arch/x86/kernel/process.c:354
 arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:345
 default_idle_call+0x6d/0x90 kernel/sched/idle.c:93
 cpuidle_idle_call kernel/sched/idle.c:153 [inline]
 do_idle+0x395/0x560 kernel/sched/idle.c:262
 cpu_startup_entry+0x104/0x120 kernel/sched/idle.c:368
 start_secondary+0x426/0x5b0 arch/x86/kernel/smpboot.c:269
 secondary_startup_64+0xa5/0xb0 arch/x86/kernel/head_64.S:242

Allocated by task 4557:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
 kmem_cache_alloc+0x12e/0x760 mm/slab.c:3554
 kmem_cache_zalloc include/linux/slab.h:691 [inline]
 net_alloc net/core/net_namespace.c:383 [inline]
 copy_net_ns+0x159/0x4c0 net/core/net_namespace.c:423
 create_new_namespaces+0x69d/0x8f0 kernel/nsproxy.c:107
 unshare_nsproxy_namespaces+0xc3/0x1f0 kernel/nsproxy.c:206
 ksys_unshare+0x708/0xf90 kernel/fork.c:2408
 __do_sys_unshare kernel/fork.c:2476 [inline]
 __se_sys_unshare kernel/fork.c:2474 [inline]
 __x64_sys_unshare+0x31/0x40 kernel/fork.c:2474
 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 69:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kmem_cache_free+0x86/0x2d0 mm/slab.c:3756
 net_free net/core/net_namespace.c:399 [inline]
 net_drop_ns.part.14+0x11a/0x130 net/core/net_namespace.c:406
 net_drop_ns net/core/net_namespace.c:405 [inline]
 cleanup_net+0x6a1/0xb20 net/core/net_namespace.c:541
 process_one_work+0xc1e/0x1b50 kernel/workqueue.c:2145
 worker_thread+0x1cc/0x1440 kernel/workqueue.c:2279
 kthread+0x345/0x410 kernel/kthread.c:240
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:412

The buggy address belongs to the object at ffff88018a02c140
 which belongs to the cache net_namespace of size 8832
The buggy address is located 8800 bytes inside of
 8832-byte region [ffff88018a02c140, ffff88018a02e3c0)
The buggy address belongs to the page:
page:ffffea0006280b00 count:1 mapcount:0 mapping:ffff88018a02c140 index:0x0 compound_mapcount: 0
flags: 0x2fffc0000008100(slab|head)
raw: 02fffc0000008100 ffff88018a02c140 0000000000000000 0000000100000001
raw: ffffea00062a1320 ffffea0006268020 ffff8801d9bdde40 0000000000000000
page dumped because: kasan: bad access detected

Fixes: b922622e ("sock_diag: don't broadcast kernel sockets")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Craig Gallek <kraig@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even if commit 1d27732f ("net: dsa: setup and teardown ports") indicated
that registering a devlink instance for unused ports is not a problem, and this
is true, this can be confusing nonetheless, so let's not do it.

Fixes: 1d27732f ("net: dsa: setup and teardown ports")
Reported-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While removing queues from the XPS map, the individual CPU ID
alone was used to index the CPUs map, this should be changed to also
factor in the traffic class mapping for the CPU-to-queue lookup.

Fixes: 184c449f ("net: Add support for XPS with QoS via traffic classes")
Signed-off-by: NAmritha Nambiar <amritha.nambiar@intel.com>
Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mesh_neighbour_update() function, queued via beacon rx, can race with
userspace creating the same station.  If the station already exists by the
time mesh_neighbour_update() is called, the function wrongly assumes rate
control has been initialized and calls rate_control_rate_update(), which
in turn calls into the driver.

Updating the rate control before it has been initialized can cause a
crash in some drivers, for example this firmware crash in ath10k due
to sta->rx_nss being 0:

[ 3078.088247] mesh0: Inserted STA 5c:e2:8c:f1:ab:ba
[ 3078.258407] ath10k_pci 0000:0d:00.0: firmware crashed! (uuid d6ed5961-93cc-4d61-803f-5eda55bb8643)
[ 3078.258421] ath10k_pci 0000:0d:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 3078.258426] ath10k_pci 0000:0d:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0
[ 3078.258608] ath10k_pci 0000:0d:00.0: firmware ver 10.2.4.70.59-2 api 5 features no-p2p,raw-mode,mfp crc32 4159f498
[ 3078.258613] ath10k_pci 0000:0d:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 3078.258617] ath10k_pci 0000:0d:00.0: htt-ver 2.1 wmi-op 5 htt-op 2 cal otp max-sta 128 raw 0 hwcrypto 1
[ 3078.260627] ath10k_pci 0000:0d:00.0: firmware register dump:
[ 3078.260640] ath10k_pci 0000:0d:00.0: [00]: 0x4100016C 0x000015B3 0x009A31BB 0x00955B31
[ 3078.260647] ath10k_pci 0000:0d:00.0: [04]: 0x009A31BB 0x00060130 0x00000008 0x00000007
[ 3078.260652] ath10k_pci 0000:0d:00.0: [08]: 0x00000000 0x00955B31 0x00000000 0x0040F89E
[ 3078.260656] ath10k_pci 0000:0d:00.0: [12]: 0x00000009 0xFFFFFFFF 0x009580F5 0x00958117
[ 3078.260660] ath10k_pci 0000:0d:00.0: [16]: 0x00958080 0x0094085D 0x00000000 0x00000000
[ 3078.260664] ath10k_pci 0000:0d:00.0: [20]: 0x409A31BB 0x0040AA84 0x00000002 0x00000001
[ 3078.260669] ath10k_pci 0000:0d:00.0: [24]: 0x809A2B8D 0x0040AAE4 0x00000088 0xC09A31BB
[ 3078.260673] ath10k_pci 0000:0d:00.0: [28]: 0x809898C8 0x0040AB04 0x0043F91C 0x009C6458
[ 3078.260677] ath10k_pci 0000:0d:00.0: [32]: 0x809B66AC 0x0040AB34 0x009C6458 0x0043F91C
[ 3078.260686] ath10k_pci 0000:0d:00.0: [36]: 0x809B2824 0x0040ADA4 0x00400000 0x00416EB4
[ 3078.260692] ath10k_pci 0000:0d:00.0: [40]: 0x809C07D9 0x0040ADE4 0x0040AE08 0x00412028
[ 3078.260696] ath10k_pci 0000:0d:00.0: [44]: 0x809486FA 0x0040AE04 0x00000001 0x00000000
[ 3078.260700] ath10k_pci 0000:0d:00.0: [48]: 0x80948E2C 0x0040AEA4 0x0041F4F0 0x00412634
[ 3078.260704] ath10k_pci 0000:0d:00.0: [52]: 0x809BFC39 0x0040AEC4 0x0041F4F0 0x00000001
[ 3078.260709] ath10k_pci 0000:0d:00.0: [56]: 0x80940F18 0x0040AF14 0x00000010 0x00403AC0
[ 3078.284130] ath10k_pci 0000:0d:00.0: failed to to request monitor vdev 1 stop: -108

Fix this by checking whether the sta has already initialized rate control
using the flag for that purpose.  We can also drop the unnecessary insert
parameter here.
Signed-off-by: NBob Copeland <bobcopeland@fb.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Allocation size of nlmsg in cfg80211_ft_event is based on ric_ies_len
and doesn't take into account ies_len. This leads to
NL80211_CMD_FT_EVENT message construction failure in case ft_event
contains large enough ies buffer.
Add ies_len to the nlmsg allocation size.
Signed-off-by: NDedy Lansky <dlansky@codeaurora.org>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Recently during testing, I ran into the following panic:

  [  207.892422] Internal error: Accessing user space memory outside uaccess.h routines: 96000004 [#1] SMP
  [  207.901637] Modules linked in: binfmt_misc [...]
  [  207.966530] CPU: 45 PID: 2256 Comm: test_verifier Tainted: G        W         4.17.0-rc3+ #7
  [  207.974956] Hardware name: FOXCONN R2-1221R-A4/C2U4N_MB, BIOS G31FB18A 03/31/2017
  [  207.982428] pstate: 60400005 (nZCv daif +PAN -UAO)
  [  207.987214] pc : bpf_skb_load_helper_8_no_cache+0x34/0xc0
  [  207.992603] lr : 0xffff000000bdb754
  [  207.996080] sp : ffff000013703ca0
  [  207.999384] x29: ffff000013703ca0 x28: 0000000000000001
  [  208.004688] x27: 0000000000000001 x26: 0000000000000000
  [  208.009992] x25: ffff000013703ce0 x24: ffff800fb4afcb00
  [  208.015295] x23: ffff00007d2f5038 x22: ffff00007d2f5000
  [  208.020599] x21: fffffffffeff2a6f x20: 000000000000000a
  [  208.025903] x19: ffff000009578000 x18: 0000000000000a03
  [  208.031206] x17: 0000000000000000 x16: 0000000000000000
  [  208.036510] x15: 0000ffff9de83000 x14: 0000000000000000
  [  208.041813] x13: 0000000000000000 x12: 0000000000000000
  [  208.047116] x11: 0000000000000001 x10: ffff0000089e7f18
  [  208.052419] x9 : fffffffffeff2a6f x8 : 0000000000000000
  [  208.057723] x7 : 000000000000000a x6 : 00280c6160000000
  [  208.063026] x5 : 0000000000000018 x4 : 0000000000007db6
  [  208.068329] x3 : 000000000008647a x2 : 19868179b1484500
  [  208.073632] x1 : 0000000000000000 x0 : ffff000009578c08
  [  208.078938] Process test_verifier (pid: 2256, stack limit = 0x0000000049ca7974)
  [  208.086235] Call trace:
  [  208.088672]  bpf_skb_load_helper_8_no_cache+0x34/0xc0
  [  208.093713]  0xffff000000bdb754
  [  208.096845]  bpf_test_run+0x78/0xf8
  [  208.100324]  bpf_prog_test_run_skb+0x148/0x230
  [  208.104758]  sys_bpf+0x314/0x1198
  [  208.108064]  el0_svc_naked+0x30/0x34
  [  208.111632] Code: 91302260 f9400001 f9001fa1 d2800001 (29500680)
  [  208.117717] ---[ end trace 263cb8a59b5bf29f ]---

The program itself which caused this had a long jump over the whole
instruction sequence where all of the inner instructions required
heavy expansions into multiple BPF instructions. Additionally, I also
had BPF hardening enabled which requires once more rewrites of all
constant values in order to blind them. Each time we rewrite insns,
bpf_adj_branches() would need to potentially adjust branch targets
which cross the patchlet boundary to accommodate for the additional
delta. Eventually that lead to the case where the target offset could
not fit into insn->off's upper 0x7fff limit anymore where then offset
wraps around becoming negative (in s16 universe), or vice versa
depending on the jump direction.

Therefore it becomes necessary to detect and reject any such occasions
in a generic way for native eBPF and cBPF to eBPF migrations. For
the latter we can simply check bounds in the bpf_convert_filter()'s
BPF_EMIT_JMP helper macro and bail out once we surpass limits. The
bpf_patch_insn_single() for native eBPF (and cBPF to eBPF in case
of subsequent hardening) is a bit more complex in that we need to
detect such truncations before hitting the bpf_prog_realloc(). Thus
the latter is split into an extra pass to probe problematic offsets
on the original program in order to fail early. With that in place
and carefully tested I no longer hit the panic and the rewrites are
rejected properly. The above example panic I've seen on bpf-next,
though the issue itself is generic in that a guard against this issue
in bpf seems more appropriate in this case.
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Device features may change during transmission. In particular with
corking, a device may toggle scatter-gather in between allocating
and writing to an skb.

Do not unconditionally assume that !NETIF_F_SG at write time implies
that the same held at alloc time and thus the skb has sufficient
tailroom.

This issue predates git history.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even though ip6erspan_tap_init() sets up hlen and tun_hlen according to
what ERSPAN needs, it goes ahead to call ip6gre_tnl_link_config() which
overwrites these settings with GRE-specific ones.

Similarly for changelink callbacks, which are handled by
ip6gre_changelink() calls ip6gre_tnl_change() calls
ip6gre_tnl_link_config() as well.

The difference ends up being 12 vs. 20 bytes, and this is generally not
a problem, because a 12-byte request likely ends up allocating more and
the extra 8 bytes are thus available. However correct it is not.

So replace the newlink and changelink callbacks with an ERSPAN-specific
ones, reusing the newly-introduced _common() functions.

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Extract from ip6gre_changelink() a reusable function
ip6gre_changelink_common(). This will allow introduction of
ERSPAN-specific _changelink() function with not a lot of code
duplication.

Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: NPetr Machata <petrm@mellanox.com>
Acked-by: NWilliam Tu <u9012063@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>