This issue was reported by a user who downloaded a corrupt saa7164
firmware, then went looking for a valid xc5000 firmware to fix the
error displayed...but the device in question has no xc5000, thus after
much effort, the wild goose chase eventually led to a support call.

The xc5000 has nothing to do with saa7164 (as far as I can tell),
so replace the string with saa7164 as well as give a meaningful
hint on the firmware mismatch.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The renesas-ceu driver intializes the desired mbus_format at 'complete'
time, inspecting the supported subdevice ones, and tuning some
parameters to produce the requested memory format from what the sensor
can produce. Although, the initially selected mbus_format was not
provided to the subdevice during set_fmt and try_fmt operations,
providing instead a '0' mbus format code.

As long as the sensor defaults to a compatible mbus_format when an
invalid code as '0' is provided, capture operations work correctly. If
the subdevice defaults to an unsupported format (eg. some RGB
permutations) capture does not work properly due to a mismatch on the
expected and received image format on the wire.

Fix that by re-using the initially selected mbus_format code during
set_fmt and try_fmt subdevice operation calls.

Tested by printing out the format selection procedure with ov7670
sensor.

Before this patch:
[    0.866001] ov7670_try_fmt_internal -- Looking for mbus_code 0x0000
[    0.870882] ov7670_try_fmt_internal -- Try mbus_code 0x2008
[    0.876336] ov7670_try_fmt_internal -- Try mbus_code 0x1002
[    0.881387] ov7670_try_fmt_internal -- Try mbus_code 0x1008
[    0.886537] ov7670_try_fmt_internal -- Try mbus_code 0x3001
[    0.891584] ov7670_try_fmt_internal -- mbus_code defaulted to 0x2008

With this patch applied:
[    0.867015] ov7670_try_fmt_internal -- Looking for mbus_code 0x2008
[    0.873205] ov7670_try_fmt_internal -- Try mbus_code 0x2008: match
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Use tabs instead of spaces and help is two-spaced after single tab.

The incorrect spacing breaks menuconfig on older kernels.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Kconfig Help statements are two-spaced after a single tab.

The incorrect spacing breaks menuconfig on older kernels.
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The use of a hard coded i2c address breaks the creation of the
second tuner in DualHD 01595 models. The issue is compounded
by lack of any error message stating that a driver failed
initialization. Use addr, which contains the correct address
for each tuner.

Fixes: ad32495b ("media: em28xx-dvb: simplify DVB module probing logic")
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This reverts commit fc7f8fd4.

Whilst the rationale for the above commit was in general correct, i.e.
that users *consuming* the DMA addresses should rely on sglen rather
than num_pages, it has always been the case that the DMA API itself
still requires that dma_{sync,unmap}_sg() are called with the original
number of entries as passed to dma_map_sg(), not the number of mapped
entries it returned. Thus the particular changes made in that patch
were erroneous.

At worst this might lead to data loss at the tail end of mapped buffers
on non-coherent hardware, while at best it's an example of incorrect
DMA API usage which has proven to mislead readers.
Signed-off-by: NRobin Murphy <robin.murphy@arm.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Trivial fix to spelling mistake in proc text string
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Do not set context colorimetry on the raw (OUTPUT) queue for encoders.
Always set colorimetry on the coded queue (CAPTURE for encoders, OUTPUT
for decoders).
This also skips propagation of capture queue format and selection
rectangle on S_FMT(OUTPUT) to the CAPTURE queue for encoders.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The driver helpfully resets the capture queue format and selection
rectangle whenever output format is changed. This only works while
the capture queue is not busy.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Instead of duplicating the same code, call into coda_s_fmt_vid_out to
propagate the output format to the capture queue.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Replace the manual validity checks for the GPIO with the
gpio_is_valid().

In vip_gpio_reserve(), Error checking for gpio pin is not correct.
If pwr_pin = -1, It will return 0. This should be return an error.

In sta2x11_vip_init_one(), Error checking for gpio 'reset_pin'
is unnecessary. Because vip_gpio_reserve() is also checking for
valid gpio pin. So removed extra error checking for gpio 'reset_pin'.
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Replace the manual validity checks for the GPIO with the
gpio_is_valid().
Signed-off-by: NArvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Fix this warning when building the docs:

include/media/v4l2-dev.h:42: warning: Enum value 'VFL_TYPE_MAX' not described in enum 'vfl_devnode_type'
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Smatch complains that "venc" could be uninitialized.  There are a couple
of error paths where it looks like maybe that could happen.  I don't know
if it's really a bug, but it's reasonable to set "venc" to NULL and
silence the warning.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This driver needs a pull up output GPIO, but devm_gpiod_get() is called
with GPIOD_IN. This apparently works fine for the RPi3 where the DT
correctly specifies a pull up GPIO, but on the i.MX6 it also needs to
be specified with devm_gpiod_get().
Reported-by: NHenrik Mau <Henrik.Mau@linn.co.uk>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

We should get drvdata from struct device directly. Going via
platform_device is an unneeded step back and forth.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Reference id -> 1c8f4220 ("mm: change return type to
vm_fault_t")
Signed-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/platform/mtk-jpeg/mtk_jpeg_core.c:1087:1-3: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 648a9576 ("media: vcodec: fix error return value from mtk_jpeg_clk_init()")

CC: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Improves code clarity in two ways:
1. The plural name makes it more clear that it is an array.
2. The name of the array is now no longer identical to the struct type
name, so it is easier to find in the code.
Signed-off-by: NSimon Que <sque@chromium.org>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

s/dose/does/

Fixes: d295c6a4 ("[media] media: entity: Add media_entity_get_fwnode_pad() function")
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Interrupt behavior shows that some time the frame end and frame start of
next frame is unstable and can range from several to hundreds of
micro-sec. In the case of ~10us, isr may not clear next sof interrupt
status in single handling, which prevents new interrupts from coming.

Fix this by handling all pending IRQs before exiting isr, so any abnormal
behavior results from very short interrupt status changes is protected.
Signed-off-by: NBingbu Cao <bingbu.cao@intel.com>
Signed-off-by: NAndy Yeh <andy.yeh@intel.com>
Signed-off-by: NYong Zhi <yong.zhi@intel.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Just checking for ifdefs cause build issues as reported by
kernel test:

config: openrisc-allmodconfig (attached as .config)
compiler: or1k-linux-gcc (GCC) 6.0.0 20160327 (experimental)

All errors (new ones prefixed by >>):

   drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_init_connections':
>> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:8: error: implicit declaration of function 'omapdss_find_mgr_from_display' [-Werror=implicit-function-declaration]
     mgr = omapdss_find_mgr_from_display(def_dssdev);
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2396:6: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     mgr = omapdss_find_mgr_from_display(def_dssdev);
         ^
   drivers/video/fbdev/omap2/omapfb/omapfb-main.c: In function 'omapfb_find_default_display':
>> drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:13: error: implicit declaration of function 'omapdss_get_default_display_name' [-Werror=implicit-function-declaration]
     def_name = omapdss_get_default_display_name();
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/video/fbdev/omap2/omapfb/omapfb-main.c:2430:11: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
     def_name = omapdss_get_default_display_name();
              ^

So, use IS_ENABLED() instead.

Fixes: 771f7be8 ("media: omapfb: omapfb_dss.h: add stubs to build with COMPILE_TEST && DRM_OMAP")

Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: tomi.valkeinen@ti.com
Cc: linux-omap@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

0day build bot reported an unnoticed recursive dependency, fix it
by removing the select statement.

fixes: c66d4d99a8fb ("cx231xx: Add I2C_MUX dependency")
Signed-off-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The recent "x86 ZONE_DMA love" discussion at LSF/MM pointed out that some
gspca sub-drivvers are using GFP_DMA to allocate buffers which are used
for USB bulk transfers, there is absolutely no need for this, drop it.

Cc: "Luis R. Rodriguez" <mcgrof@kernel.org>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This driver depends on sony-laptop driver, but this is available
only for x86. So, add a stub function, in order to allow building
it on non-x86 too.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This is the version update for this cxd2880 driver changing.
Signed-off-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: NMasayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: NHideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: NKota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: NToshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: NSatoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This is the optimization for SPI drive current and
signal lock condition check part for BER/PER measure
to ensure BER/PER are stable
Signed-off-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: NMasayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: NHideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: NKota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: NToshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: NSatoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This is the modification of structure declaration for spi_transfer.
Signed-off-by: NYasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: NMasayuki Yamamoto <Masayuki.Yamamoto@sony.com>
Signed-off-by: NHideki Nozawa <Hideki.Nozawa@sony.com>
Signed-off-by: NKota Yonezawa <Kota.Yonezawa@sony.com>
Signed-off-by: NToshihiko Matsumoto <Toshihiko.Matsumoto@sony.com>
Signed-off-by: NSatoshi Watanabe <Satoshi.C.Watanabe@sony.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

As newer boards got added, update the cardlists.
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Extra code to be able to use this stick, only digital, not analog
nor remote-control.
Signed-off-by: NMarcel Stork <mjstork@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

A cosmetic change by combining two sets of boards into one set because
having the same arguments.
Signed-off-by: NMarcel Stork <mjstork@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The VIN Gen3 hardware don't have Line Post-Clip capabilities as VIN Gen2
hardware have. To protect against writing outside the capture window
enable field toggle after a set number of lines have been captured.

Capturing outside the allocated capture buffer where observed on R-Car
Gen3 Salvator-XS H3 from the CVBS input if the standard is
misconfigured. That is if a PAL source is connected to the system but
the adv748x standard is set to NTSC. In this case the format reported by
the adv748x is 720x480 and that is what is used for the media pipeline.
The PAL source generates frames in the format of 720x576 and the field
is not toggled until the VSYNC is detected and at that time data have
already been written outside the allocated capture buffer.

With this change the capture in the situation described above results in
garbage frames but that is far better then writing outside the capture
buffer.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

By setting VNMC_YCAL rcar-vin can support input video in
MEDIA_BUS_FMT_UYVY8_1X16 format.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Store the group pointer before disassociating the VIN from the group.

Fixes: 3bb4c3bc ("media: rcar-vin: add group allocator functions")
Reported-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The compatible string "renesas,rcar-gen3-vin" was added before the
Gen3 driver code was added but it's not possible to use. Each SoC in the
Gen3 series require SoC specific knowledge in the driver to function.
Remove it before it is added to any device tree descriptions.
Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This was left over from the conversion to VB2, where the call was
getting invoked both in buffer_queue and start_streaming, which
was intermittently causing invalid opcodes on the VBI RISC queue.

This change effectively mirrors the exact same change Hans Verkuil
made in cx88-video.c in commit 389208e1 ("[media] cx88:
remove leftover start_video_dma() call").

Thanks to Daniel Glöckner for spotting the actual bug after I spent
several days trying to chase down the issue.

Fixes: 389208e1 ("[media] cx88: remove leftover start_video_dma() call")
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Thanks-to: Daniel Glöckner <daniel-gl@gmx.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, but the implementation in this
driver returns an 'int'.

Fix this by returning 'netdev_tx_t' in this driver too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The method dvb_frontend_ops::search() is defined as
returning an 'enum dvbfe_search', but the implementation in this
driver returns an 'int'.

Fix this by returning 'enum dvbfe_search' in this driver too.
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Acked-by: NBrad Love <brad@nextdimension.cc>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The method dvb_frontend_ops::get_frontend_algo() is defined as
returning an 'enum dvbfe_algo', but the implementation in this
driver returns an 'int'.

Fix this by returning 'enum dvbfe_algo' on drivers.

[mchehab+samsung@kernel.org: merge similar patches and patch
 ddbridge-mci.c the same way]
Signed-off-by: NLuc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Commit 7378f114 ("media: omap2: omapfb: allow building it with
COMPILE_TEST") broke compilation without CONFIG_I2C selected.
drivers/media/platform/fsl-viu.c: In function ‘viu_of_probe’:
drivers/media/platform/fsl-viu.c:1452:7: error: implicit declaration of function ‘i2c_get_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration]
  ad = i2c_get_adapter(0);
       ^~~~~~~~~~~~~~~
       i2c_lock_adapter
drivers/media/platform/fsl-viu.c:1452:5: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
  ad = i2c_get_adapter(0);
     ^
drivers/media/platform/fsl-viu.c:1534:2: error: implicit declaration of function ‘i2c_put_adapter’; did you mean ‘i2c_lock_adapter’? [-Werror=implicit-function-declaration]
  i2c_put_adapter(ad);
  ^~~~~~~~~~~~~~~
  i2c_lock_adapter

Added I2C dependency in order to make all configurations work again.
Signed-off-by: NAnders Roxell <anders.roxell@linaro.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>