Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 25 1月, 2013 11 次提交
  3. 24 1月, 2013 16 次提交
  5. 23 1月, 2013 13 次提交
    • T
      ALSA: hda - Fix inconsistent pin states after resume · 31614bb8
      由 Takashi Iwai 提交于 
      The commit [26a6cb6c: ALSA: hda - Implement a poll loop for jacks as a
module parameter] introduced the polling jack detection code, but it
also moved the call of snd_hda_jack_set_dirty_all() in the resume path
after resume/init ops call.  This caused a regression when the jack
state has been changed during power-down (e.g. in the power save
mode).  Since the driver doesn't probe the new jack state but keeps
using the cached value due to no dirty flag, the pin state remains
also as if the jack is still plugged.

The fix is simply moving snd_hda_jack_set_dirty_all() to the original
position.
Reported-by: NManolo Díaz <diaz.manolo@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
      31614bb8
    • S
      ring-buffer: Remove trace.h from ring_buffer.c · 0b07436d
      由 Steven Rostedt 提交于 
      ring_buffer.c use to require declarations from trace.h, but
these have moved to the generic header files. There's nothing
in trace.h that ring_buffer.c requires.

There's some headers that trace.h included that ring_buffer.c
needs, but it's best that it includes them directly, and not
include trace.h.

Also, some things may use ring_buffer.c without having tracing
configured. This removes the dependency that may come in the
future.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0b07436d
    • S
      ring-buffer: User context bit recursion checking · 567cd4da
      由 Steven Rostedt 提交于 
      Using context bit recursion checking, we can help increase the
performance of the ring buffer.

Before this patch:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253

(average: 10.3012)

Now we have:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 9.712
Time: 9.824
Time: 9.861
Time: 9.827
Time: 9.962
Time: 9.905
Time: 9.886
Time: 10.088
Time: 9.861
Time: 9.834

(average: 9.876)

 a 4% savings!
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      567cd4da
    • S
      ftrace: Use only the preempt version of function tracing · 897f68a4
      由 Steven Rostedt 提交于 
      The function tracer had two different versions of function tracing.

The disabling of irqs version and the preempt disable version.

As function tracing in very intrusive and can cause nasty recursion
issues, it has its own recursion protection. But the old method to
do this was a flat layer. If it detected that a recursion was happening
then it would just return without recording.

This made the preempt version (much faster than the irq disabling one)
not very useful, because if an interrupt were to occur after the
recursion flag was set, the interrupt would not be traced at all,
because every function that was traced would think it recursed on
itself (due to the context it preempted setting the recursive flag).

Now that we have a recursion flag for every context level, we
no longer need to worry about that. We can disable preemption,
set the current context recursion check bit, and go on. If an
interrupt were to come along, it would check its own context bit
and happily continue to trace.

As the preempt version is faster than the irq disable version,
there's no more reason to keep the preempt version around.
And the irq disable version still had an issue with missing
out on tracing NMI code.

Remove the irq disable function tracer version and have the
preempt disable version be the default (and only version).

Before this patch we had from running:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 12.028
Time: 11.945
Time: 11.925
Time: 11.964
Time: 12.002
Time: 11.910
Time: 11.944
Time: 11.929
Time: 11.941
Time: 11.924

(average: 11.9512)

Now we have:

 # echo function > /debug/tracing/current_tracer
 # for i in `seq 10`; do ./hackbench 50; done
Time: 10.285
Time: 10.407
Time: 10.243
Time: 10.372
Time: 10.380
Time: 10.198
Time: 10.272
Time: 10.354
Time: 10.248
Time: 10.253

(average: 10.3012)

 a 13.8% savings!
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      897f68a4
    • S
      tracing: Avoid unnecessary multiple recursion checks · edc15caf
      由 Steven Rostedt 提交于 
      When function tracing occurs, the following steps are made:
  If arch does not support a ftrace feature:
   call internal function (uses INTERNAL bits) which calls...
  If callback is registered to the "global" list, the list
   function is called and recursion checks the GLOBAL bits.
   then this function calls...
  The function callback, which can use the FTRACE bits to
   check for recursion.

Now if the arch does not suppport a feature, and it calls
the global list function which calls the ftrace callback
all three of these steps will do a recursion protection.
There's no reason to do one if the previous caller already
did. The recursion that we are protecting against will
go through the same steps again.

To prevent the multiple recursion checks, if a recursion
bit is set that is higher than the MAX bit of the current
check, then we know that the check was made by the previous
caller, and we can skip the current check.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      edc15caf
    • S
      tracing: Make the trace recursion bits into enums · e46cbf75
      由 Steven Rostedt 提交于 
      Convert the bits into enums which makes the code a little easier
to maintain.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      e46cbf75
    • S
      ftrace: Add context level recursion bit checking · c29f122c
      由 Steven Rostedt 提交于 
      Currently for recursion checking in the function tracer, ftrace
tests a task_struct bit to determine if the function tracer had
recursed or not. If it has, then it will will return without going
further.

But this leads to races. If an interrupt came in after the bit
was set, the functions being traced would see that bit set and
think that the function tracer recursed on itself, and would return.

Instead add a bit for each context (normal, softirq, irq and nmi).

A check of which context the task is in is made before testing the
associated bit. Now if an interrupt preempts the function tracer
after the previous context has been set, the interrupt functions
can still be traced.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      c29f122c
    • S
      ftrace: Optimize the function tracer list loop · 0a016409
      由 Steven Rostedt 提交于 
      There is lots of places that perform:

       op = rcu_dereference_raw(ftrace_control_list);
       while (op != &ftrace_list_end) {

Add a helper macro to do this, and also optimize for a single
entity. That is, gcc will optimize a loop for either no iterations
or more than one iteration. But usually only a single callback
is registered to the function tracer, thus the optimized case
should be a single pass. to do this we now do:

	op = rcu_dereference_raw(list);
	do {
		[...]
	} while (likely(op = rcu_dereference_raw((op)->next)) &&
	       unlikely((op) != &ftrace_list_end));

An op is always registered (ftrace_list_end when no callbacks is
registered), thus when a single callback is registered, the link
list looks like:

 top => callback => ftrace_list_end => NULL.

The likely(op = op->next) still must be performed due to the race
of removing the callback, where the first op assignment could
equal ftrace_list_end. In that case, the op->next would be NULL.
But this is unlikely (only happens in a race condition when
removing the callback).

But it is very likely that the next op would be ftrace_list_end,
unless more than one callback has been registered. This tells
gcc what the most common case is and makes the fast path with
the least amount of branches.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0a016409
    • S
      ftrace: Fix function tracing recursion self test · 9640388b
      由 Steven Rostedt 提交于 
      The function tracing recursion self test should not crash
the machine if the resursion test fails. If it detects that
the function tracing is recursing when it should not be, then
bail, don't go into an infinite recursive loop.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      9640388b
    • S
      ftrace: Fix global function tracers that are not recursion safe · 63503794
      由 Steven Rostedt 提交于 
      If one of the function tracers set by the global ops is not recursion
safe, it can still be called directly without the added recursion
supplied by the ftrace infrastructure.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      63503794
    • S
      tracing: Fix selftest function recursion accounting · 05cbbf64
      由 Steven Rostedt 提交于 
      The test that checks function recursion does things differently
if the arch does not support all ftrace features. But that really
doesn't make a difference with how the test runs, and either way
the count variable should be 2 at the end.

Currently the test wrongly fails for archs that don't support all
the ftrace features.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      05cbbf64
    • S
      tracing: Fix race with max_tr and changing tracers · 34600f0e
      由 Steven Rostedt 提交于 
      There's a race condition between the setting of a new tracer and
the update of the max trace buffers (the swap). When a new tracer
is added, it sets current_trace to nop_trace before disabling
the old tracer. At this moment, if the old tracer uses update_max_tr(),
the update may trigger the warning against !current_trace->use_max-tr,
as nop_trace doesn't have that set.

As update_max_tr() requires that interrupts be disabled, we can
add a check to see if current_trace == nop_trace and bail if it
does. Then when disabling the current_trace, set it to nop_trace
and run synchronize_sched(). This will make sure all calls to
update_max_tr() have completed (it was called with interrupts disabled).

As a clean up, this commit also removes shrinking and recreating
the max_tr buffer if the old and new tracers both have use_max_tr set.
The old way use to always shrink the buffer, and then expand it
for the next tracer. This is a waste of time.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      34600f0e
    • L
      Revert "drivers/misc/ti-st: remove gpio handling" · a7e2ca17
      由 Luciano Coelho 提交于 
      This reverts commit eccf2979.

The reason is that it broke TI WiLink shared transport on Panda.
Also, callback functions should not be added to board files anymore,
so revert to implementing the power functions in the driver itself.

Additionally, changed a variable name ('status' to 'err') so that this
revert compiles properly.

Cc: stable <stable@vger.kernel.org> [3.7]
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NLuciano Coelho <coelho@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a7e2ca17