Instead of immediately reopening the queues (in case of block_tx),
calling the post_channel_switch operation and sending the
notification, wait for the first beacon on the new channel.  This
makes sure that we don't lose packets if the AP/GO is not on the new
channel yet.
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

As a counterpart to the pre_channel_switch operation, add a
post_channel_switch operation.  This allows the drivers to go back to
a normal configuration after the channel switch is completed.
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some drivers may need to prepare for a channel switch also when it is
initiated from the remote side (eg. station, P2P client).  To make
this possible, add a generic callback that can be called for all
interface types.
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

The Extended Channel Switching capability bit in the extended
capabilities element must be set if the driver supports CSA on
non-beaconing interfaces.

Since this capability needs to be set during driver registration, the
extended_capabiliities global variable needs to be moved to the local
structure so that it can be modified.
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Some devices may need the device timestamp in order to synchronize the
channel switch.  To pass this value back to the driver, add it to the
channel switch structure and copy the device_timestamp value received
in the rx info structure into it.
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Implement get_mpp and dump_mpp cfg80211_ops to export the content of the
802.11s mesh proxy path table to userspace.
Signed-off-by: NHenning Rogge <henning.rogge@fkie.fraunhofer.de>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Add two new cfg80211 operations for querying a table with proxied mesh
paths.
Signed-off-by: NHenning Rogge <henning.rogge@fkie.fraunhofer.de>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Commit 5935839a ("mac80211: improve minstrel_ht rate sorting by
throughput & probability") replaced the constant 8 with MCS_GROUP_RATES
when getting the number of streams of an HT MCS. See commit 7a5e3fa2
("mac80211: minstrel_ht: replace some occurences of MCS_GROUP_RATES").

Fixes: 5935839a ("mac80211: improve minstrel_ht rate sorting by throughput & probability")
Signed-off-by: NKarl Beldan <karl.beldan@rivierawaves.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Trivial cleanups.
Signed-off-by: NBen Greear <greearb@candelatech.com>
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

If the packet can't be delivered to userspace (at all or
quickly enough) then it can leak - fix that.
Signed-off-by: NBen Greear <greearb@candelatech.com>
[rewrite commit message]
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

Pull ARM64 SoC changes from Arnd Bergmann:
 "Starting with 3.18, we are merging SoC-specific changes for arm64
  through the arm-soc tree, like we have been doing for arm32.

  This time, there is only one set of changes, adding support for the
  Cavium "Thunder" Soc family.  Since the changes are relatively small,
  this includes Kconfig, defconfig and DT changes.

  If all goes well, we will never require adding actual C source code
  for platform support in arm64, given that the architecture is more
  clearly defined and we have moved out a lot of the platform specifics
  into device drivers for arm32 already"

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64, defconfig: Enable Cavium Thunder SoC in defconfig
  arm64, thunder: Add Kconfig option for Cavium Thunder SoC Family
  arm64, thunder: Document devicetree bindings for Cavium Thunder SoC
  arm64, thunder: Add initial dts for Cavium Thunder SoC

Pull ARM SoC defconfig changes from Arnd Bergmann:
 "This is a collection of the various changes to defconfig files, most
  importantly enabling some additional platforms in the
  multi_v7_defconfig file"

* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (40 commits)
  ARM: configs: fix duplicate entry in multi_v7
  ARM: multi_v7_defconfig: add missing Tegra options
  ARM: bcm2835: enable USB_DWC2_HOST in defconfig
  ARM: meson: update multi_v7_defconfig
  ARM: multi_v7_defconfig: Enable Mediatek platform
  ARM: qcom: Update defconfig
  ARM: mvebu: add gpio-fan to mvebu_v7_defconfig
  ARM: mvebu: add LED class support built-in in mvebu_v7_defconfig
  ARM: shmobile: Enable r8a7794 SoC in shmobile_defconfig
  ARM: LPC32xx: defconfig update
  ARM: configs: Enable cpufreq-cpu0 for multi_v7_defconfig
  ARM: configs: Remove REGULATOR_VIRTUAL_CONSUMER from defconfigs
  ARM: tegra: enable Atmel touchpad in defconfig
  ARM: at91: sama5: update defconfig
  ARM: at91: at91sam9rl: update defconfig
  ARM: at91: at91sam9g45: update defconfig
  ARM: at91: at91sam9263: update defconfig
  ARM: at91: at91sam9261_9g10: update defconfig
  ARM: at91: at91sam9260_9g20: update defconfig
  ARM: at91: at91_dt: update defconfig
  ...

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  Most of the new code is for the Keystone Navigator driver, which is
  new base support that is going to be needed for their hardware
  accelerated network driver and other units.

  Most of the commits are for moving old code around from at91 and omap
  for things that are done in device drivers nowadays.

   - at91: move reset, poweroff, memory and clocksource code into
     drivers directories
   - socfpga: add edac driver (through arm-soc, as requested by Boris)
   - omap: move omap-intc code to drivers/irqchip
   - sunxi: added an RTC driver for sun6i
   - omap: mailbox driver related changes
   - keystone: support for the "Navigator" component
   - versatile: new reboot, led and soc drivers"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (92 commits)
  bus: arm-ccn: Fix spurious warning message
  leds: add device tree bindings for register bit LEDs
  soc: add driver for the ARM RealView
  power: reset: driver for the Versatile syscon reboot
  leds: add a driver for syscon-based LEDs
  drivers/soc: ti: fix build break with modules
  MAINTAINERS: Add Keystone Multicore Navigator drivers entry
  soc: ti: add Keystone Navigator DMA support
  Documentation: dt: soc: add Keystone Navigator DMA bindings
  soc: ti: add Keystone Navigator QMSS driver
  Documentation: dt: soc: add Keystone Navigator QMSS bindings
  rtc: sunxi: Depend on platforms sun4i/sun7i that actually have the rtc
  rtc: sun6i: Add sun6i RTC driver
  irqchip: omap-intc: remove unnecessary comments
  irqchip: omap-intc: correct maximum number or MIR registers
  irqchip: omap-intc: enable TURBO idle mode
  irqchip: omap-intc: enable IP protection
  irqchip: omap-intc: remove unnecesary of_address_to_resource() call
  irqchip: omap-intc: comment style cleanup
  irqchip: omap-intc: minor improvement to omap_irq_pending()
  ...

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, this is the largest branch, though this time a little under
  half of the total changes with 307 individual non-merge changesets.

  The largest changes are the addition of new machines, in particular
  the Tegra based Chromebook, the Renesas r8a7794 SoC, and DT support
  for the old i.MX1 platform.

  Other changes include
   - at91: various sam9 and sama5 updates
   - exynos: much extended Peach Pi/Pit (Chromebook 2) support
   - keystone: new peripherals
   - meson: added DT for meson6 SoC
   - mvebu: new device support for Armada 370/375
   - qcom: improved support for IPQ8064 and MSM8x60
   - rockchip: much improved support for rk3288
   - shmobile: lots of updates all over the place
   - sunxi: dts license change
   - sunxi: more a23 device support
   - vexpress: CLCD DT description"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (308 commits)
  ARM: DTS: meson: update DTSI to add watchdog node
  ARM: dts: keystone-k2l: fix mdio io start address
  ARM: dts: keystone-k2e: fix mdio io start address
  ARM: dts: keystone-k2e: update usb1 node for dma properties
  ARM: dts: keystone: fix io range for usb_phy0
  Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
  Revert "ARM: dts: hix5hd2: add wdg node"
  ARM: dts: add rk3288 i2s controller
  ARM: vexpress: Add CLCD Device Tree properties
  ARM: bcm2835: add I2S pinctrl to device tree
  ARM: meson: documentation: add bindings documentation
  ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
  ARM: dts: mt6589: Change compatible string for GIC
  ARM: dts: mediatek: Add compatible property for aquaris5
  ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
  ARM: dts: mt6589: Fix typo in GIC unit address
  ARM: dts: Build dtb for Mediatek board
  ARM: dts: keystone: fix bindings for pcie and usb clock nodes
  ARM: dts: keystone: k2l: Fix chip selects for SPI devices
  ARM: dts: keystone: add dsp gpio controllers nodes
  ...

Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support.  Among the things new for this release
  are:

   - at91: Added support for the new SAMA5D4 SoC, following the earlier
     SAMA5D3
   - bcm: Added support for BCM63XX family of DSL SoCs
   - hisi: Added support for HiP04 server-class SoC
   - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
   - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC

  Noteworthy changes to existing SoC support are:

   - imx: convert i.MX1 to device tree
   - omap: lots of power management work
   - omap: base support to enable moving to standard UART driver
   - shmobile: lots of progress for multiplatform support, still
     ongoing"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
  ARM: hisi: depend on ARCH_MULTI_V7
  CNS3xxx: Fix debug UART.
  ARM: at91: fix nommu build regression
  ARM: meson: add basic support for MesonX SoCs
  ARM: meson: debug: add debug UART for earlyprintk support
  irq: Export handle_fasteoi_irq
  ARM: mediatek: Add earlyprintk support for mt6589
  ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
  ARM: debug: fix alphanumerical order on debug uarts
  ARM: at91: document Atmel SMART compatibles
  ARM: at91: add sama5d4 support to sama5_defconfig
  ARM: at91: dt: add device tree file for SAMA5D4ek board
  ARM: at91: dt: add device tree file for SAMA5D4 SoC
  ARM: at91: SAMA5D4 SoC detection code and low level routines
  ARM: at91: introduce basic SAMA5D4 support
  clk: at91: add a driver for the h32mx clock
  ARM: pxa3xx: provide specific platform_devices for all ssp ports
  ARM: pxa: ssp: provide platform_device_id for PXA3xx
  ARM: OMAP4+: Remove static iotable mappings for SRAM
  ARM: OMAP4+: Move SRAM data to DT
  ...

Pull ARM SoC cleanups from Arnd Bergmann:
 "This time around, the cleanup branch contains mostly code removal.  A
  number of board files for at91, imx and msm have become obsolete
  because of the DT conversion and are now ready to be removed.  The
  OMAP platform has traditionally had its own DMA engine abstraction and
  as this is being phased out, a lot of the original code is now unused
  and can be removed as well.

  S3C24xx can be simplified now that the restart code is a proper device
  driver.

  Finally, a number of cleanups in shmobile are done to prepare for the
  addition of new code in other branches"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: at91: Remove the support for the RSI EWS board
  arm: mach-omap2: Convert pr_warning to pr_warn
  ARM: OMAP: Remove unused pieces of legacy DMA API
  ARM: at91: remove board file for Acme Systems Fox G20
  ARM: orion5x: Convert pr_warning to pr_warn
  ARM: S3C24XX: remove separate restart code
  ARM: EXYNOS: Do not calculate boot address twice
  ARM: sunxi: Remove sun4i reboot code from mach directory
  ARM: imx: Remove mach-mxt_td60 board file
  ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
  ARM: shmobile: r8a7740: Clean up pm domain table
  ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
  ARM: shmobile: sh7372: Make domain_devices[] static __initdata
  ARM: shmobile: mackerel: Make domain_devices[] static __initdata
  clocksource: tcb_clksrc: sanitize IRQ request
  ARM: at91/tclib: mask interruptions at shutdown and probe
  ARM: at91/tclib: move initialization from alloc to probe
  ARM: at91/tclib: prefer using of devm_* functions
  ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver
  ARM: shmobile: r8a7791 is now called "R-Car M2-W"
  ...

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "These are bug fixes for harmless problems that were not important
  enough to get fixed in 3.17.  The majority of these are OMAP specific,
  but there are also a couple for Marvell mvebu, cns3xxx, and others, as
  well as some updates for the MAINTAINERS file.

  In particular, Robert Jarzmik and Daniel Mack now volunteered to help
  out maintaining the PXA platform, Krzysztof Halasa took over the
  cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic
  meson platform, and Matthias Brugger is now listed for the mediatek
  platform he recently contributed"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: update Shawn's email address
  MAINTAINERS: condense some Tegra related entries
  MAINTAINERS: add Alexandre Courbot for Tegra
  MAINTAINERS: CNS3xxx and IXP4xx update.
  MAINTAINERS: Add maintainers entry for Mediatek SoCs
  arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500
  MAINTAINERS: add a third maintainer to mach-bcm
  CNS3xxx: Fix PCIe read size limit.
  CNS3xxx: Fix logical PCIe topology.
  CNS3xxx: Fix debug UART.
  MAINTAINERS: Add entry for the Amlogic MesonX SoCs
  MAINTAINERS: update ARM pxa maintainers
  ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
  ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
  ARM: mvebu: Netgear RN102: Use Hardware BCH ECC
  ARM: Kirkwood: Fix DT based DSA.
  ARM: OMAP2+: make of_device_ids const
  ARM: omap2: make arrays containing machine compatible strings const
  ARM: LPC32xx: Fix reset function
  ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
  ...

No need to store netlbl_unlabel_genl_init result and test it before returning.
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add two helpers so that drivers do not have to care of BQL being
available or not.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJim Davis <jim.epost@gmail.com>
Fixes: 29d40c90 ("net/mlx4_en: Use prefetch in tx path")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In commit 7bced397,
dma_cookie was removed from struct skbuff.
But the description of dma_cookie still exist.
So the "make xmldocs" output following warning.

Warning(.//include/linux/skbuff.h:609): Excess struct/union
/enum/typedef member 'dma_cookie' description in 'sk_buff'

Remove description of dma_cookie fix the symptom.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The tx_desc struct holds 8 __be64 values.  The original code in
ring_tx_db() took a tx_desc pointer then casted it to an int pointer and
then casted it to a u64 pointer.  It was confusing and triggered some
static checker warnings.

I have changed the cxgb_pio_copy() function to only take tx_desc
pointers.  This isn't really a loss of flexibility because anything else
was buggy to begin with.

I also removed the casting on the destination pointer since that was
unnecessary and a bit messy.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

"cntxt_id" is an unsigned int but "udb" is a u64 so there is a potential
shift wrapping bug here.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support skb->xmit_more in i40e is straightforward : we need to move
around i40e_maybe_stop_tx() call to correctly test netif_xmit_stopped()
before taking the decision to not kick the NIC.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDaniel Borkmann <dborkman@redhat.com>
Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Christophe Leroy says:

====================
net: fs_enet: Remove non NAPI RX and add NAPI for TX

When using a MPC8xx as a router, 'perf' shows a significant time spent in
fs_enet_interrupt() and fs_enet_start_xmit().
'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent
between spin_unlock_irqrestore() and the following instruction, hence in
interrupt handling. This is due to the TX complete interrupt that fires after
each transmitted packet.
This patchset first remove all non NAPI handling as NAPI has become the only
mode for RX, then adds NAPI for handling TX complete.
This improves NAT TCP throughput by 21% on MPC885 with FEC.

Tested on MPC885 with FEC.

[PATCH 1/2] net: fs_enet: Remove non NAPI RX
[PATCH 2/2] net: fs_enet: Add NAPI TX
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using a MPC8xx as a router, 'perf' shows a significant time spent in
fs_enet_interrupt() and fs_enet_start_xmit().
'perf annotate' shows that the time spent in fs_enet_start_xmit is indeed spent
between spin_unlock_irqrestore() and the following instruction, hence in
interrupt handling. This is due to the TX complete interrupt that fires after
each transmitted packet.
This patch modifies the handling of TX complete to use NAPI.
With this patch, my NAT router offers a throughput improved by 21%

Original performance:

[root@localhost tmp]# scp toto pgs:/tmp
toto                                          100%  256MB   2.8MB/s   01:31

Performance with the patch:

[root@localhost tmp]# scp toto pgs:/tmp
toto                                          100%  256MB   3.4MB/s   01:16
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the probe function, use_napi is inconditionnaly set to 1. This patch removes
all the code which is conditional to !use_napi, and removes use_napi which has
then become useless.
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RTL8168EP is Realtek PCIe Gigabit Ethernet controller with DASH support.
It is a successor chip of RTL8168DP.

For RTL8168EP, the read/write ocp register is via eri channel type 2, so I
move ocp_xxx() related functions under rtl_eri_xxx. And use r8168dp_ocp_xxx()
for RTL8168DP ocp read/write, r8168ep_ocp_xxx() for RTL8168EP ocp read/write.

The way of checking dash enable is different with RTL8168DP. I use
r8168dp_check_dash()for RTL8168DP and r8168ep_check_dash() for RTL8168EP,
to check if dash is enabled.

The driver_start() and driver_stop() of RTL8168EP is also different with
RTL8168DP. I use rtl8168dp_driver_xxx() for RTL8168DP and
rtl8168ep_driver_xxx for RTL8168EP.

Right now, RTL8168EP phy mcu did not need firmware code patch, so I did not
add firmware code for it.
so I did not add firmware code for it.
Signed-off-by: NChun-Hao Lin <hau@realtek.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We need to copy exts->type when committing the change, otherwise
it would be always 0. This is a quick fix for -net and -stable,
for net-next tcf_exts will be removed.

Fixes: commit 33be6271 ("net_sched: act: use standard struct list_head")
Reported-by: NJamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Because CCN's cycle counter always runs, it will generate
an interrupt on overflow even if the relevant perf event
was not requested, causing a spurious warning message.

Fixed now by warning on only normal counter unwanted
overflows. Also cleaning the overflow mask at init now,
not to warn on event previously requested by firmware.
Signed-off-by: NPawel Moll <pawel.moll@arm.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

My Freescale email address will be gone shortly.  Update my email to be
the Linaro one.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

There's little point having specific entries in MAINTAINERS for Tegra
drivers that are already covered by the top-level Tegra architecture
support entry, and maintained by people listed there. Remove the
duplicates.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

I'd like to propose Alexandre Courbot as an additional Tegra maintainer.
He's been working on a variety of Tegra-related code for a while, and
is now officially tasked with working on upstream support.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NThierry Reding <treding@nvidia.com>
--
v2:
* Use Alexandre's full name.
* Use a non-NVIDIA email address to avoid Exchange Server patch corruption.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Merge "Meson6 WDT support" from Carlo Caione:

This patch adds the support for the Meson6 watchdog in the DTSI

* tag 'meson-wdt-dt-3.18' of https://github.com/carlocaione/linux-meson:
  ARM: DTS: meson: update DTSI to add watchdog node
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set introduces a couple of new features such as large
  sector size, FITRIM, and atomic/volatile writes.

  Several patches enhance power-off recovery and checkpoint routines.

  The fsck.f2fs starts to support fixing corrupted partitions with
  recovery hints provided by this patch-set.

  Summary:
   - retain some recovery information for fsck.f2fs
   - enhance checkpoint speed
   - enhance flush command management
   - bug fix for lseek
   - tune in-place-update policies
   - enhance roll-forward speed
   - revisit all the roll-forward and fsync rules
   - support larget sector size
   - support FITRIM
   - support atomic and volatile writes

  And several clean-ups and bug fixes are included"

* tag 'f2fs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
  f2fs: support volatile operations for transient data
  f2fs: support atomic writes
  f2fs: remove unused return value
  f2fs: clean up f2fs_ioctl functions
  f2fs: potential shift wrapping buf in f2fs_trim_fs()
  f2fs: call f2fs_unlock_op after error was handled
  f2fs: check the use of macros on block counts and addresses
  f2fs: refactor flush_nat_entries to remove costly reorganizing ops
  f2fs: introduce FITRIM in f2fs_ioctl
  f2fs: introduce cp_control structure
  f2fs: use more free segments until SSR is activated
  f2fs: change the ipu_policy option to enable combinations
  f2fs: fix to search whole dirty segmap when get_victim
  f2fs: fix to clean previous mount option when remount_fs
  f2fs: skip punching hole in special condition
  f2fs: support large sector size
  f2fs: fix to truncate blocks past EOF in ->setattr
  f2fs: update i_size when __allocate_data_block
  f2fs: use MAX_BIO_BLOCKS(sbi)
  f2fs: remove redundant operation during roll-forward recovery
  ...

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - support the NFSv4.2 SEEK operation (allowing clients to support
     SEEK_HOLE/SEEK_DATA), thanks to Anna.
   - end the grace period early in a number of cases, mitigating a
     long-standing annoyance, thanks to Jeff
   - improve SMP scalability, thanks to Trond"

* 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits)
  nfsd: eliminate "to_delegation" define
  NFSD: Implement SEEK
  NFSD: Add generic v4.2 infrastructure
  svcrdma: advertise the correct max payload
  nfsd: introduce nfsd4_callback_ops
  nfsd: split nfsd4_callback initialization and use
  nfsd: introduce a generic nfsd4_cb
  nfsd: remove nfsd4_callback.cb_op
  nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
  nfsd: fix nfsd4_cb_recall_done error handling
  nfsd4: clarify how grace period ends
  nfsd4: stop grace_time update at end of grace period
  nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
  nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
  nfsd: serialize nfsdcltrack upcalls for a particular client
  nfsd: pass extra info in env vars to upcalls to allow for early grace period end
  nfsd: add a v4_end_grace file to /proc/fs/nfsd
  lockd: add a /proc/fs/lockd/nlm_end_grace file
  nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
  nfsd: remove redundant boot_time parm from grace_done client tracking op
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - fix an NFSv4.1 state renewal regression
   - fix open/lock state recovery error handling
   - fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
   - fix statd when reconnection fails
   - don't wake tasks during connection abort
   - don't start reboot recovery if lease check fails
   - fix duplicate proc entries

  Features:
  - pNFS block driver fixes and clean ups from Christoph
  - More code cleanups from Anna
  - Improve mmap() writeback performance
  - Replace use of PF_TRANS with a more generic mechanism for avoiding
    deadlocks in nfs_release_page"

* tag 'nfs-for-3.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (66 commits)
  NFSv4.1: Fix an NFSv4.1 state renewal regression
  NFSv4: fix open/lock state recovery error handling
  NFSv4: Fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
  NFS: Fabricate fscache server index key correctly
  SUNRPC: Add missing support for RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT
  NFSv3: Fix missing includes of nfs3_fs.h
  NFS/SUNRPC: Remove other deadlock-avoidance mechanisms in nfs_release_page()
  NFS: avoid waiting at all in nfs_release_page when congested.
  NFS: avoid deadlocks with loop-back mounted NFS filesystems.
  MM: export page_wakeup functions
  SCHED: add some "wait..on_bit...timeout()" interfaces.
  NFS: don't use STABLE writes during writeback.
  NFSv4: use exponential retry on NFS4ERR_DELAY for async requests.
  rpc: Add -EPERM processing for xs_udp_send_request()
  rpc: return sent and err from xs_sendpages()
  lockd: Try to reconnect if statd has moved
  SUNRPC: Don't wake tasks during connection abort
  Fixing lease renewal
  nfs: fix duplicate proc entries
  pnfs/blocklayout: Fix a 64-bit division/remainder issue in bl_map_stripe
  ...

Pull char/misc driver updates from Greg KH:
 "Here's the big set of driver patches for char/misc drivers.  Nothing
  major in here, the shortlog goes into the details.  All have been in
  the linux-next tree for a while with no issues"

* tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (80 commits)
  mei: mei_txe_fw_sts can be static
  mei: fix kernel-doc warnings
  mei: fix KDoc documentation formatting
  mei: drop me_client_presentation_num
  mei: trivial: fix errors in prints in comments
  mei: remove include to pci header from mei module files
  mei: push pci cfg structure me hw
  mei: remove the reference to pdev from mei_device
  mei: move fw_status back to hw ops handlers
  mei: get rid of most of the pci dependencies in mei
  mei: push all standard settings into mei_device_init
  mei: move mei_hbm_hdr function from hbm.h the hbm.c
  mei: kill error message for allocation failure
  mei: nfc: fix style warning
  mei: fix style warning: Missing a blank line after declarations
  mei: pg: fix cat and paste error in comments
  mei: debugfs: add single buffer indicator
  mei: debugfs: adjust print buffer
  mei: add hbm and pg state in devstate debugfs print
  Drivers: hv: vmbus: Enable interrupt driven flow control
  ...

Pull compression update from Greg KH:
 "More fun with the LZO compression code.  Here's some patches that
  properly document what the logic is, and fix up all of the previously
  reported issues against the LZO code.

  This has been in linux-next for a while with no issues"

* tag 'compress-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  lzo: check for length overrun in variable length encoding.
  Revert "lzo: properly check for overruns"
  Documentation: lzo: document part of the encoding