- 19 5月, 2011 7 次提交
-
-
由 Guenter Roeck 提交于
Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910 Sequencer and System Health Controllers. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>
-
由 Guenter Roeck 提交于
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>
-
由 Guenter Roeck 提交于
This patch adds hardware monitoring support for Maxim MAX16065, MAX16066, MAX16067, MAX16068, MAX16070, and MAX16071 flash-configurable system managers with nonvolatile fault registers. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: NJean Delvare <khali@linux-fr.org>
-
由 Jerome Oufella 提交于
The sht15 sensor allows validating exchanges to and from the device using a crc8 function. An utility function to reverse a byte has also been added. Signed-off-by: NJerome Oufella <jerome.oufella@savoirfairelinux.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Vivien Didelot 提交于
* Add support for: - Heater. - End of battery notice. - Ability not to reload from OTP. - Low resolution (12bit temp, 8bit humidity). * Add an utility function to read individual bytes from the device. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Vivien Didelot 提交于
* Add a documentation file for the device. * Respect a bit more the kernel-doc syntax. * Rename some variables for clarity. * Use bool type for flags. * Use an enum for states (actions being done). Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Per Dalén 提交于
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with Overtemperature Alarm from Maxim. Signed-off-by: NPer Dalen <per.dalen@appeartv.com> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 29 4月, 2011 3 次提交
-
-
由 Jean Delvare 提交于
Recent Xeon processor thermal sensors are supported by the coretemp driver and not the adm1021 driver. Only one old generation of Xeon processors (the first Netburst ones) are supported by the adm1021 driver. Reported-by: NDarren Hart <dvhart@linux.intel.com> Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Guenter Roeck 提交于
The lm90 driver's attribute update interval is configurable. Reflect this information in the driver documentation. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Guenter Roeck 提交于
This patch adds support for ADT7461A and NCT1008 to the lm90 driver. Both chips have identical functionality and report the same manufacturing ID and device ID values. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 19 4月, 2011 6 次提交
-
-
由 Guenter Roeck 提交于
MAX34440 and MAX34441 have their own driver, thus there should be explicit documentation instead of mentioning the chips in the generic PMBus driver documentation. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>
-
由 Guenter Roeck 提交于
MAX16064 has its own driver, thus should have its own documentation instead of being mentioned in the generic PMBus driver documentation. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>
-
由 Guenter Roeck 提交于
MAX8688 has its own driver, thus should have its own documentation instead of being mentioned in the generic PMBus driver documentation. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>
-
由 Guenter Roeck 提交于
Fix spelling, correct label name error, and add missing attribute to PMBus driver documentation. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: NTom Grennan <tom.grennan@ericsson.com>
-
由 Guenter Roeck 提交于
tempererature may sound interesting, but temperature is still preferred. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org>
-
由 Guenter Roeck 提交于
When writing hardware monitoring drivers, there are some common pitfalls which keep coming up in code reviews. This patch provides a document describing all those pitfalls and how to avoid them. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 26 3月, 2011 3 次提交
-
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
Add support for the Fintek F81865F. It's essentially compatible with the F71882FG, but has fewer inputs: 7 voltage, 2 temperature and 2 fan inputs only. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Jean Delvare 提交于
The list of supported devices was not always well documented in all places. Clarify and list all devices in documentation, Kconfig and the driver itself. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 23 3月, 2011 1 次提交
-
-
由 Keerthy 提交于
This driver exposes the sysfs nodes of the TWL4030 MADC module. All the voltage channel values are expressed in terms of mV. Channel 13 and channel 14 are reserved. There are channels which represent temperature and current the output is represented by celcius and mA respectively. Signed-off-by: NKeerthy <j-keerthy@ti.com> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
- 22 3月, 2011 7 次提交
-
-
由 Dirk Eibach 提交于
Configuration for ads1015 gain and datarate is possible via devicetree or platform data. This is a followup patch to previous ads1015 patches on Jean Delvares tree. Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Hans de Goede 提交于
SMSC SCH5627 Super I/O chips include complete hardware monitoring capabilities. They can monitor up to 5 voltages, 4 fans and 8 temperatures. The hardware monitoring part of the SMSC SCH5627 is accessed by talking through an embedded microcontroller. An application note describing the protocol for communicating with the microcontroller is available upon request. Please mail me if you want a copy. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Len Sorensen 提交于
Add support for detection of the National Semiconductor LM75A using the ID register value. Signed-off-by: NLen Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
由 Jean Delvare 提交于
The lis3lv02d drivers aren't hardware monitoring drivers, so the don't belong to drivers/hwmon. Move them to drivers/misc, short of a better home. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Tested-by: NEric Piel <eric.piel@tremplin-utc.net> Tested-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jean Delvare 提交于
The hp_accel driver isn't a hardware monitoring driver, so it doesn't belong to drivers/hwmon. Move it to drivers/platform/x86, assuming HP doesn't ship non-x86 laptops. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NEric Piel <eric.piel@tremplin-utc.net> Acked-by: NJonathan Cameron <jic23@cam.ac.uk> Tested-by: NEric Piel <eric.piel@tremplin-utc.net> Tested-by: NTakashi Iwai <tiwai@suse.de>
-
由 Jean Delvare 提交于
Apparently users are interested in this information, so let's provide it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 15 3月, 2011 11 次提交
-
-
由 Hans de Goede 提交于
Note that these 2 are register compatible and report the same superio id, but they are 2 distinct chips / models! Signed-off-by: NHans de Goede <hdegoede@redhat.com> Tested-by: NThomas Faber <thfabba@gmx.de> Tested-by: NAlexey Sychev <owl@umail.ru> Tested-by: NDieter Bloms <dieter@bloms.de> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Hans de Goede 提交于
Note that this patch also makes 2 changes to the code paths for the f71889fg to keep the code unified between the 2 (for simplicities sake). Both of these are harmless for then f71889fg: 1) The first change is to always set the FAN_PROG_SEL bit to 0. This influences accesses to some banked fan / pwm registers. On the f71889fg no registers which we use are banked. On the f71889ed however some more fan registers have been banked including one which we use, by making the FAN_PROG_SEL bit 0, address 0x96 will point to the right register. 2) The second change is to see a FANx_TEMP_SEL value of 0 as pointing to a PECI / AMDSI value, and thus disable our pwm related sysfs attr. This is correct for the f71889ed and on the f71889fg 0 is a reserved value, so we should never see it and if we do, disabling the pwm related sysfs attr is a sane thing to do. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Tested-by: NThomas Greve <tg42@gmx.net> Tested-by: NSander Eikelenboom <linux@eikelenboom.it> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Guenter Roeck 提交于
This patch adds support for NCT6775F and NCT6776F to the w83627ehf driver. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Tested-by: Ian Dobson <i.dobson@planet-ian.com> (NCT6776F) Tested-by: Zachary Marzec <zmarzec@gmail.com> (ASUS P8P67 PRO/NCT6776F) Acked-by: NIan Dobson <i.dobson@planet-ian.com>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NIan Dobson <i.dobson@planet-ian.com>
-
由 Guenter Roeck 提交于
Add support for 4th temperature sensor on W83677HG-B. Display temperature labels on W83677HG-B to report temperature sources. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NIan Dobson <i.dobson@planet-ian.com>
-
由 Guenter Roeck 提交于
Some fan control chips support a configuration register to set the number of tachometer pulses per fan revolution. Add an ABI attribute to support this configuration register. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org>
-
由 per.dalen@appeartv.com 提交于
LTC4151 is High Voltage I2C Current and Voltage Monitor from Linear Technology. Signed-off-by: NPer Dalen <per.dalen@appeartv.com> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 Guenter Roeck 提交于
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJonathan Cameron <jic23@cam.ac.uk>
-
由 Guenter Roeck 提交于
EMC6D103S is similar to EMC6D103, only it does not support registers 62[5:7], 6D[0:7], and 6E[0:7]. Register respective sysfs attributes and update affected registers for all other chips only. Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com> Acked-by: NJean Delvare <khali@linux-fr.org>
-
由 Guenter Roeck 提交于
This patch adds support for hardware monitoring of Lineage Compact Power Line Power Entry Modules. Reviewed-by: NTom Grennan <tom.grennan@ericsson.com> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
由 stigge@antcom.de 提交于
2-Channel Temperature Monitor with Dual PWM Fan-Speed Controller Signed-off-by: NRoland Stigge <stigge@antcom.de> Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-
- 18 2月, 2011 1 次提交
-
-
由 Clemens Ladisch 提交于
Add the PCI ID to support the internal temperature sensor of the AMD "Llano" and "Brazos" processor families. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Cc: stable@kernel.org # ca86828c: x86, AMD, PCI: Add AMD northbridge PCI device Cc: stable@kernel.org Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
-