Currently the messenger calls out to a get_authorizer con op, which will
create a new authorizer if it doesn't yet have one.  In the meantime, when
we rotate our service keys, the authorizer doesn't get updated.  Eventually
it will be rejected by the server on a new connection attempt and get
invalidated, and we will then rebuild a new authorizer, but this is not
ideal.

Instead, if we do have an authorizer, call a new update_authorizer op that
will verify that the current authorizer is using the latest secret.  If it
is not, we will build a new one that does.  This avoids the transient
failure.

This fixes one of the sorry sequence of events for bug

	http://tracker.ceph.com/issues/4282Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

We were invalidating the authorizer by removing the ticket handler
entirely.  This was effective in inducing us to request a new authorizer,
but in the meantime it mean that any authorizer we generated would get a
new and initialized handler with secret_id=0, which would always be
rejected by the server side with a confusing error message:

 auth: could not find secret_id=0
 cephx: verify_authorizer could not get service secret for service osd secret_id=0

Instead, simply clear the validity field.  This will still induce the auth
code to request a new secret, but will let us continue to use the old
ticket in the meantime.  The messenger code will probably continue to fail,
but the exponential backoff will kick in, and eventually the we will get a
new (hopefully more valid) ticket from the mon and be able to continue.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

We maintain a counter of failed auth attempts to allow us to retry once
before failing.  However, if the second attempt succeeds, the flag isn't
cleared, which makes us think auth failed again later when the connection
resets for other reasons (like a socket error).

This is one part of the sorry sequence of events in bug

	http://tracker.ceph.com/issues/4282Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

This is an old protocol extension that allows the client and server to
avoid resending old messages after a reconnect (following a socket error).
Instead, the exchange their sequence numbers during the handshake.  This
avoids sending a bunch of useless data over the socket.

It has been supported in the server code since v0.22 (Sep 2010).
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

We should advance the user data pointer by _len_ instead of _written_.
_len_ is the data length written in each iteration while _written_ is the
accumulated data length we have writtent out.
Signed-off-by: NHenry C Chang <henry.cy.chang@gmail.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>
Tested-by: NSage Weil <sage@inktank.com>

Current ceph code tracks directory's completeness in two places.
ceph_readdir() checks i_release_count to decide if it can set the
I_COMPLETE flag in i_ceph_flags. All other places check the I_COMPLETE
flag. This indirection introduces locking complexity.

This patch adds a new variable i_complete_count to ceph_inode_info.
Set i_release_count's value to it when marking a directory complete.
By comparing the two variables, we know if a directory is complete
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>

Basically all cases in write_partial_msg_pages() use the cursor, and
as a result we can simplify that function quite a bit.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The wart that is the ceph message trail can now be removed, because
its only user was the osd client, and the previous patch made that
no longer the case.

The result allows write_partial_msg_pages() to be simplified
considerably.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The osd trail is a pagelist, used only for a CALL osd operation
to hold the class and method names, along with any input data for
the call.

It is only currently used by the rbd client, and when it's used it
is the only bit of outbound data in the osd request.  Since we
already support (non-trail) pagelist data in a message, we can
just save this outbound CALL data in the "normal" pagelist rather
than the trail, and get rid of the trail entirely.

The existing pagelist support depends on the pagelist being
dynamically allocated, and ownership of it is passed to the
messenger once it's been attached to a message.  (That is to say,
the messenger releases and frees the pagelist when it's done with
it).  That means we need to dynamically allocate the pagelist also.

Note that we simply assert that the allocation of a pagelist
structure succeeds.  Appending to a pagelist might require a dynamic
allocation, so we're already assuming we won't run into trouble
doing so (we're just ignore any failures--and that should be fixed
at some point).

This resolves:
    http://tracker.ceph.com/issues/4407Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Add support for recording a ceph pagelist as data associated with an
osd request.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The length of outgoing data in an osd request is dependent on the
osd ops that are embedded in that request.  Each op is encoded into
a request message using osd_req_encode_op(), so that should be used
to determine the amount of outgoing data implied by the op as it
is encoded.

Have osd_req_encode_op() return the number of bytes of outgoing data
implied by the op being encoded, and accumulate and use that in
ceph_osdc_build_request().

As a result, ceph_osdc_build_request() no longer requires its "len"
parameter, so get rid of it.

Using the sum of the op lengths rather than the length provided is
a valid change because:
    - The only callers of osd ceph_osdc_build_request() are
      rbd and the osd client (in ceph_osdc_new_request() on
      behalf of the file system).
    - When rbd calls it, the length provided is only non-zero for
      write requests, and in that case the single op has the
      same length value as what was passed here.
    - When called from ceph_osdc_new_request(), (it's not all that
      easy to see, but) the length passed is also always the same
      as the extent length encoded in its (single) write op if
      present.

This resolves:
    http://tracker.ceph.com/issues/4406Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Implement and use cursor routines for page array message data items
for outbound message data.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Implement and use cursor routines for bio message data items for
outbound message data.

(See the previous commit for reasoning in support of the changes
in out_msg_pos_next().)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Switch to using the message cursor for the (non-trail) outgoing
pagelist data item in a message if present.

Notes on the logic changes in out_msg_pos_next():
    - only the mds client uses a ceph pagelist for message data;
    - if the mds client ever uses a pagelist, it never uses a page
      array (or anything else, for that matter) for data in the same
      message;
    - only the osd client uses the trail portion of a message data,
      and when it does, it never uses any other data fields for
      outgoing data in the same message; and finally
    - only the rbd client uses bio message data (never pagelist).

Therefore out_msg_pos_next() can assume:
    - if we're in the trail portion of a message, the message data
      pagelist, data, and bio can be ignored; and
    - if there is a page list, there will never be any a bio or page
      array data, and vice-versa.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This just inserts some infrastructure in preparation for handling
other types of ceph message data items.  No functional changes,
just trying to simplify review by separating out some noise.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This patch lays out the foundation for using generic routines to
manage processing items of message data.

For simplicity, we'll start with just the trail portion of a
message, because it stands alone and is only present for outgoing
data.

First some basic concepts.  We'll use the term "data item" to
represent one of the ceph_msg_data structures associated with a
message.  There are currently four of those, with single-letter
field names p, l, b, and t.  A data item is further broken into
"pieces" which always lie in a single page.  A data item will
include a "cursor" that will track state as the memory defined by
the item is consumed by sending data from or receiving data into it.

We define three routines to manipulate a data item's cursor: the
"init" routine; the "next" routine; and the "advance" routine.  The
"init" routine initializes the cursor so it points at the beginning
of the first piece in the item.  The "next" routine returns the
page, page offset, and length (limited by both the page and item
size) of the next unconsumed piece in the item.  It also indicates
to the caller whether the piece being returned is the last one in
the data item.

The "advance" routine consumes the requested number of bytes in the
item (advancing the cursor).  This is used to record the number of
bytes from the current piece that were actually sent or received by
the network code.  It returns an indication of whether the result
means the current piece has been fully consumed.  This is used by
the message send code to determine whether it should calculate the
CRC for the next piece processed.

The trail of a message is implemented as a ceph pagelist.  The
routines defined for it will be usable for non-trail pagelist data
as well.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Group the types of message data into an abstract structure with a
type indicator and a union containing fields appropriate to the
type of data it represents.  Use this to represent the pages,
pagelist, bio, and trail in a ceph message.

Verify message data is of type NONE in ceph_msg_data_set_*()
routines.  Since information about message data of type NONE really
should not be interpreted, get rid of the other assertions in those
functions.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

A ceph message has a data payload portion.  The memory for that data
(either the source of data to send or the location to place data
that is received) is specified in several ways.  The ceph_msg
structure includes fields for all of those ways, but this
mispresents the fact that not all of them are used at a time.

Specifically, the data in a message can be in:
    - an array of pages
    - a list of pages
    - a list of Linux bios
    - a second list of pages (the "trail")
(The two page lists are currently only ever used for outgoing data.)

Impose more structure on the ceph message, making the grouping of
some of these fields explicit.  Shorten the name of the
"page_alignment" field.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define and use macros ceph_msg_has_*() to determine whether to
operate on the pages, pagelist, bio, and trail fields of a message.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Factor out a common block of code that updates a CRC calculation
over a range of data in a page.

This and the preceding patches are related to:
    http://tracker.ceph.com/issues/4403Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a new function ceph_tcp_recvpage() that behaves in a way
comparable to ceph_tcp_sendpage().

Rearrange the code in both read_partial_message_pages() and
read_partial_message_bio() so they have matching structure,
(similar to what's in write_partial_msg_pages()), and use
this new function.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Pull the code that reads the data portion into a message into
a separate function read_partial_msg_data().

Rename write_partial_msg_pages() to be write_partial_message_data()
to match its read counterpart, and to reflect its more generic
purpose.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define local variables page_offset and length to represent the range
of bytes within a page that will be sent by ceph_tcp_sendpage() in
write_partial_msg_pages().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In prepare_write_message_data(), various fields are initialized in
preparation for writing message data out.  Meanwhile, in
read_partial_message(), there is essentially the same block of code,
operating on message variables associated with an incoming message.

Generalize prepare_write_message_data() so it works for both
incoming and outcoming messages, and use it in both spots.  The
did_page_crc is not used for input (so it's harmless to initialize
it).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There are several places where a message's out_msg_pos or in_msg_pos
field is used repeatedly within a function.  Use a local pointer
variable for this purpose to unclutter the code.

This and the upcoming cleanup patches are related to:
    http://tracker.ceph.com/issues/4403Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

At one time it was necessary to clear a message's bio_iter field to
avoid a bad pointer dereference in write_partial_msg_pages().

That no longer seems to be the case.  Here's why.

The message's bio fields represent (in this case) outgoing data.
Between where the bio_iter is made NULL in prepare_write_message()
and the call in that function to prepare_message_data(), the
bio fields are never used.

In prepare_message_data(), init-bio_iter() is called, and the result
of that overwrites the value in the message's bio_iter field.

Because it gets overwritten anyway, there is no need to set it to
NULL.  So don't do it.

This resolves:
    http://tracker.ceph.com/issues/4402Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The mds client no longer tries to assign zero-length message data,
and the osd client no longer sets its data info more than once.
This allows us to activate assertions in the messenger to verify
these things never happen.

This resolves both of these:
    http://tracker.ceph.com/issues/4263
    http://tracker.ceph.com/issues/4284Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

When an incoming message is destined for the osd client, the
messenger calls the osd client's alloc_msg method.  That function
looks up which request has the tid matching the incoming message,
and returns the request message that was preallocated to receive the
response.  The response message is therefore known before the
request is even started.

Between the start of the request and the receipt of the response,
the request and its data fields will not change, so there's no
reason we need to hold off setting them.  In fact it's preferable
to set them just once because it's more obvious that they're
unchanging.

So set up the fields describing where incoming data is to land in a
response message at the beginning of ceph_osdc_start_request().
Define a helper function that sets these fields, and use it to
set the fields for both outgoing data in the request message and
incoming data in the response.

This resolves:
    http://tracker.ceph.com/issues/4284Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Record the number of bytes of data in a page array rather than the
number of pages in the array.  It can be assumed that the page array
is of sufficient size to hold the number of bytes indicated (and
offset by the indicated alignment).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Change it so we only assign outgoing data information for messages
if there is outgoing data to send.

This then allows us to add a few more (currently commented-out)
assertions.

This is related to:
    http://tracker.ceph.com/issues/4284Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

Define ceph_msg_data_set_pagelist(), ceph_msg_data_set_bio(), and
ceph_msg_data_set_trail() to clearly abstract the assignment of the
remaining data-related fields in a ceph message structure.  Use the
new functions in the osd client and mds client.

This partially resolves:
    http://tracker.ceph.com/issues/4263Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

When setting page array information for message data, provide the
byte length rather than the page count ceph_msg_data_set_pages().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a function ceph_msg_data_set_pages(), which more clearly
abstracts the assignment page-related fields for data in a ceph
message structure.  Use this new function in the osd client and mds
client.

Ideally, these fields would never be set more than once (with
BUG_ON() calls to guarantee that).  At the moment though the osd
client sets these every time it receives a message, and in the event
of a communication problem this can happen more than once.  (This
will be resolved shortly, but setting up these helpers first makes
it all a bit easier to work with.)

Rearrange the field order in a ceph_msg structure to group those
that are used to define the possible data payloads.

This partially resolves:
    http://tracker.ceph.com/issues/4263Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Record the byte count for an osd request rather than the page count.
The number of pages can always be derived from the byte count (and
alignment/offset) but the reverse is not true.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Rather than explicitly initializing many fields to 0, NULL, or false
in a newly-allocated message, just use kzalloc() for allocating new
messages.  This will become a much more convenient way of doing
things anyway for upcoming patches that abstract the data field.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

While processing an outgoing pagelist (either the data pagelist or
trail) in a ceph message, the messenger cycles through each of the
pages on the list.  This is accomplished in out_msg_pos_next(), if
the end of the first page on the list is reached, the first page is
moved to the end of the list.

There is a list operation, list_rotate_left(), which performs
exactly this operation, and by using it, what's really going on
becomes more obvious.

So replace these two list_move_tail() calls with list_rotate_left().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a new function in_msg_pos_next() to match out_msg_pos_next(),
and use it in place of code at the end of read_partial_message_pages()
and read_partial_message_bio().

Note that the page number is incremented and offset reset under
slightly different conditions from before.  The result is
equivalent, however, as explained below.

Each time an incoming message is going to arrive, we find out how
much room is left--not surpassing the current page--and provide that
as the number of bytes to receive.  So the amount we'll use is the
lesser of:  all that's left of the entire request; and all that's
left in the current page.

If we received exactly how many were requested, we either reached
the end of the request or the end of the page.  In the first case,
we're done, in the second, we move onto the next page in the array.

In all cases but (possibly) on the last page, after adding the
number of bytes received, page_pos == PAGE_SIZE.  On the last page,
it doesn't really matter whether we increment the page number and
reset the page position, because we're done and we won't come back
here again.  The code previously skipped over that last case,
basically.  The new code handles that case the same as the others,
incrementing and resetting.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller for read_partial_message_bio(), and it
always passes &msg->bio_iter and &bio_seg as the second and third
arguments.  Furthermore, the message in question is always the
connection's in_msg, and we can get that inside the called function.

So drop those two parameters and use their derived equivalents.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Change the type of the "more" parameter from int to bool.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Some values printed are not (necessarily) in CPU order.  We already
have a copy of the converted versions, so use them.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>