Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 03 2月, 2015 2 次提交
  3. 24 11月, 2014 1 次提交
  5. 07 11月, 2014 1 次提交
  7. 16 9月, 2014 1 次提交
  9. 10 9月, 2014 1 次提交
  11. 25 8月, 2014 2 次提交
  13. 06 8月, 2014 1 次提交
    • W
      net-timestamp: add key to disambiguate concurrent datagrams · 09c2d251
      由 Willem de Bruijn 提交于 
      Datagrams timestamped on transmission can coexist in the kernel stack
and be reordered in packet scheduling. When reading looped datagrams
from the socket error queue it is not always possible to unique
correlate looped data with original send() call (for application
level retransmits). Even if possible, it may be expensive and complex,
requiring packet inspection.

Introduce a data-independent ID mechanism to associate timestamps with
send calls. Pass an ID alongside the timestamp in field ee_data of
sock_extended_err.

The ID is a simple 32 bit unsigned int that is associated with the
socket and incremented on each send() call for which software tx
timestamp generation is enabled.

The feature is enabled only if SOF_TIMESTAMPING_OPT_ID is set, to
avoid changing ee_data for existing applications that expect it 0.
The counter is reset each time the flag is reenabled. Reenabling
does not change the ID of already submitted data. It is possible
to receive out of order IDs if the timestamp stream is not quiesced
first.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      09c2d251
  15. 29 7月, 2014 1 次提交
    • E
      ip: make IP identifiers less predictable · 04ca6973
      由 Eric Dumazet 提交于 
      In "Counting Packets Sent Between Arbitrary Internet Hosts", Jeffrey and
Jedidiah describe ways exploiting linux IP identifier generation to
infer whether two machines are exchanging packets.

With commit 73f156a6 ("inetpeer: get rid of ip_id_count"), we
changed IP id generation, but this does not really prevent this
side-channel technique.

This patch adds a random amount of perturbation so that IP identifiers
for a given destination [1] are no longer monotonically increasing after
an idle period.

Note that prandom_u32_max(1) returns 0, so if generator is used at most
once per jiffy, this patch inserts no hole in the ID suite and do not
increase collision probability.

This is jiffies based, so in the worst case (HZ=1000), the id can
rollover after ~65 seconds of idle time, which should be fine.

We also change the hash used in __ip_select_ident() to not only hash
on daddr, but also saddr and protocol, so that ICMP probes can not be
used to infer information for other protocols.

For IPv6, adds saddr into the hash as well, but not nexthdr.

If I ping the patched target, we can see ID are now hard to predict.

21:57:11.008086 IP (...)
    A > target: ICMP echo request, seq 1, length 64
21:57:11.010752 IP (... id 2081 ...)
    target > A: ICMP echo reply, seq 1, length 64

21:57:12.013133 IP (...)
    A > target: ICMP echo request, seq 2, length 64
21:57:12.015737 IP (... id 3039 ...)
    target > A: ICMP echo reply, seq 2, length 64

21:57:13.016580 IP (...)
    A > target: ICMP echo request, seq 3, length 64
21:57:13.019251 IP (... id 3437 ...)
    target > A: ICMP echo reply, seq 3, length 64

[1] TCP sessions uses a per flow ID generator not changed by this patch.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: NJeffrey Knockel <jeffk@cs.unm.edu>
Reported-by: NJedidiah R. Crandall <crandall@cs.unm.edu>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Hannes Frederic Sowa <hannes@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      04ca6973
  17. 25 7月, 2014 1 次提交
  19. 16 7月, 2014 1 次提交
  21. 12 7月, 2014 1 次提交
  23. 08 7月, 2014 1 次提交
    • T
      ipv6: Implement automatic flow label generation on transmit · cb1ce2ef
      由 Tom Herbert 提交于 
      Automatically generate flow labels for IPv6 packets on transmit.
The flow label is computed based on skb_get_hash. The flow label will
only automatically be set when it is zero otherwise (i.e. flow label
manager hasn't set one). This supports the transmit side functionality
of RFC 6438.

Added an IPv6 sysctl auto_flowlabels to enable/disable this behavior
system wide, and added IPV6_AUTOFLOWLABEL socket option to enable this
functionality per socket.

By default, auto flowlabels are disabled to avoid possible conflicts
with flow label manager, however if this feature proves useful we
may want to enable it by default.

It should also be noted that FreeBSD has already implemented automatic
flow labels (including the sysctl and socket option). In FreeBSD,
automatic flow labels default to enabled.

Performance impact:

Running super_netperf with 200 flows for TCP_RR and UDP_RR for
IPv6. Note that in UDP case, __skb_get_hash will be called for
every packet with explains slight regression. In the TCP case
the hash is saved in the socket so there is no regression.

Automatic flow labels disabled:

  TCP_RR:
    86.53% CPU utilization
    127/195/322 90/95/99% latencies
    1.40498e+06 tps

  UDP_RR:
    90.70% CPU utilization
    118/168/243 90/95/99% latencies
    1.50309e+06 tps

Automatic flow labels enabled:

  TCP_RR:
    85.90% CPU utilization
    128/199/337 90/95/99% latencies
    1.40051e+06

  UDP_RR
    92.61% CPU utilization
    115/164/236 90/95/99% latencies
    1.4687e+06
Signed-off-by: NTom Herbert <therbert@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      cb1ce2ef
  25. 03 6月, 2014 1 次提交
    • E
      inetpeer: get rid of ip_id_count · 73f156a6
      由 Eric Dumazet 提交于 
      Ideally, we would need to generate IP ID using a per destination IP
generator.

linux kernels used inet_peer cache for this purpose, but this had a huge
cost on servers disabling MTU discovery.

1) each inet_peer struct consumes 192 bytes

2) inetpeer cache uses a binary tree of inet_peer structs,
   with a nominal size of ~66000 elements under load.

3) lookups in this tree are hitting a lot of cache lines, as tree depth
   is about 20.

4) If server deals with many tcp flows, we have a high probability of
   not finding the inet_peer, allocating a fresh one, inserting it in
   the tree with same initial ip_id_count, (cf secure_ip_id())

5) We garbage collect inet_peer aggressively.

IP ID generation do not have to be 'perfect'

Goal is trying to avoid duplicates in a short period of time,
so that reassembly units have a chance to complete reassembly of
fragments belonging to one message before receiving other fragments
with a recycled ID.

We simply use an array of generators, and a Jenkin hash using the dst IP
as a key.

ipv6_select_ident() is put back into net/ipv6/ip6_output.c where it
belongs (it is only used from this file)

secure_ip_id() and secure_ipv6_id() no longer are needed.

Rename ip_select_ident_more() to ip_select_ident_segs() to avoid
unnecessary decrement/increment of the number of segments.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      73f156a6
  27. 14 5月, 2014 1 次提交
  29. 13 5月, 2014 1 次提交
  31. 08 5月, 2014 1 次提交
  33. 16 4月, 2014 1 次提交
  35. 01 4月, 2014 1 次提交
  37. 19 3月, 2014 1 次提交
    • L
      ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly · e367c2d0
      由 lucien 提交于 
      In ip6_append_data_mtu(), when the xfrm mode is not tunnel(such as
transport),the ipsec header need to be added in the first fragment, so the mtu
will decrease to reserve space for it, then the second fragment come, the mtu
should be turn back, as the commit 0c183379
said.  however, in the commit a493e60ac4bbe2e977e7129d6d8cbb0dd236be, it use
*mtu = min(*mtu, ...) to change the mtu, which lead to the new mtu is alway
equal with the first fragment's. and cannot turn back.

when I test through  ping6 -c1 -s5000 $ip (mtu=1280):
...frag (0|1232) ESP(spi=0x00002000,seq=0xb), length 1232
...frag (1232|1216)
...frag (2448|1216)
...frag (3664|1216)
...frag (4880|164)

which should be:
...frag (0|1232) ESP(spi=0x00001000,seq=0x1), length 1232
...frag (1232|1232)
...frag (2464|1232)
...frag (3696|1232)
...frag (4928|116)

so delete the min() when change back the mtu.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Fixes: 75a493e6 ("ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size")
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      e367c2d0
  39. 11 3月, 2014 1 次提交
  41. 27 2月, 2014 1 次提交
  43. 17 2月, 2014 1 次提交
  45. 14 2月, 2014 1 次提交
    • F
      net: ip, ipv6: handle gso skbs in forwarding path · fe6cc55f
      由 Florian Westphal 提交于 
      Marcelo Ricardo Leitner reported problems when the forwarding link path
has a lower mtu than the incoming one if the inbound interface supports GRO.

Given:
Host <mtu1500> R1 <mtu1200> R2

Host sends tcp stream which is routed via R1 and R2.  R1 performs GRO.

In this case, the kernel will fail to send ICMP fragmentation needed
messages (or pkt too big for ipv6), as GSO packets currently bypass dstmtu
checks in forward path. Instead, Linux tries to send out packets exceeding
the mtu.

When locking route MTU on Host (i.e., no ipv4 DF bit set), R1 does
not fragment the packets when forwarding, and again tries to send out
packets exceeding R1-R2 link mtu.

This alters the forwarding dstmtu checks to take the individual gso
segment lengths into account.

For ipv6, we send out pkt too big error for gso if the individual
segments are too big.

For ipv4, we either send icmp fragmentation needed, or, if the DF bit
is not set, perform software segmentation and let the output path
create fragments when the packet is leaving the machine.
It is not 100% correct as the error message will contain the headers of
the GRO skb instead of the original/segmented one, but it seems to
work fine in my (limited) tests.

Eric Dumazet suggested to simply shrink mss via ->gso_size to avoid
sofware segmentation.

However it turns out that skb_segment() assumes skb nr_frags is related
to mss size so we would BUG there.  I don't want to mess with it considering
Herbert and Eric disagree on what the correct behavior should be.

Hannes Frederic Sowa notes that when we would shrink gso_size
skb_segment would then also need to deal with the case where
SKB_MAX_FRAGS would be exceeded.

This uses sofware segmentation in the forward path when we hit ipv4
non-DF packets and the outgoing link mtu is too small.  Its not perfect,
but given the lack of bug reports wrt. GRO fwd being broken this is a
rare case anyway.  Also its not like this could not be improved later
once the dust settles.
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>
Reported-by: NMarcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      fe6cc55f
  47. 14 1月, 2014 1 次提交
    • H
      ipv6: introduce ip6_dst_mtu_forward and protect forwarding path with it · 0954cf9c
      由 Hannes Frederic Sowa 提交于 
      In the IPv6 forwarding path we are only concerend about the outgoing
interface MTU, but also respect locked MTUs on routes. Tunnel provider
or IPSEC already have to recheck and if needed send PtB notifications
to the sending host in case the data does not fit into the packet with
added headers (we only know the final header sizes there, while also
using path MTU information).

The reason for this change is, that path MTU information can be injected
into the kernel via e.g. icmp_err protocol handler without verification
of local sockets. As such, this could cause the IPv6 forwarding path to
wrongfully emit Packet-too-Big errors and drop IPv6 packets.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: John Heffner <johnwheffner@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0954cf9c
  49. 19 12月, 2013 2 次提交
    • H
      ipv6: pmtudisc setting not respected with UFO/CORK · 4df98e76
      由 Hannes Frederic Sowa 提交于 
      Sockets marked with IPV6_PMTUDISC_PROBE (or later IPV6_PMTUDISC_INTERFACE)
don't respect this setting when the outgoing interface supports UFO.

We had the same problem in IPv4, which was fixed in commit
daba287b ("ipv4: fix DO and PROBE pmtu
mode regarding local fragmentation with UFO/CORK").

Also IPV6_DONTFRAG mode did not care about already corked data, thus
it may generate a fragmented frame even if this socket option was
specified. It also did not care about the length of the ipv6 header and
possible options.

In the error path allow the user to receive the pmtu notifications via
both, rxpmtu method or error queue. The user may opted in for both,
so deliver the notification to both error handlers (the handlers check
if the error needs to be enqueued).

Also report back consistent pmtu values when sending on an already
cork-appended socket.
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      4df98e76
    • H
      ipv6: support IPV6_PMTU_INTERFACE on sockets · 93b36cf3
      由 Hannes Frederic Sowa 提交于 
      IPV6_PMTU_INTERFACE is the same as IPV6_PMTU_PROBE for ipv6. Add it
nontheless for symmetry with IPv4 sockets. Also drop incoming MTU
information if this mode is enabled.

The additional bit in ipv6_pinfo just eats in the padding behind the
bitfield. There are no changes to the layout of the struct at all.
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      93b36cf3
  51. 07 12月, 2013 1 次提交
  53. 06 12月, 2013 1 次提交
  55. 01 12月, 2013 1 次提交
  57. 11 11月, 2013 1 次提交
  59. 06 11月, 2013 1 次提交
    • J
      ipv6: Fix possible ipv6 seqlock deadlock · 5ac68e7c
      由 John Stultz 提交于 
      While enabling lockdep on seqlocks, I ran across the warning below
caused by the ipv6 stats being updated in both irq and non-irq context.

This patch changes from IP6_INC_STATS_BH to IP6_INC_STATS (suggested
by Eric Dumazet) to resolve this problem.

[   11.120383] =================================
[   11.121024] [ INFO: inconsistent lock state ]
[   11.121663] 3.12.0-rc1+ #68 Not tainted
[   11.122229] ---------------------------------
[   11.122867] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[   11.123741] init/4483 [HC0[0]:SC1[3]:HE1:SE0] takes:
[   11.124505]  (&stats->syncp.seq#6){+.?...}, at: [<c1ab80c2>] ndisc_send_ns+0xe2/0x130
[   11.125736] {SOFTIRQ-ON-W} state was registered at:
[   11.126447]   [<c10e0eb7>] __lock_acquire+0x5c7/0x1af0
[   11.127222]   [<c10e2996>] lock_acquire+0x96/0xd0
[   11.127925]   [<c1a9a2c3>] write_seqcount_begin+0x33/0x40
[   11.128766]   [<c1a9aa03>] ip6_dst_lookup_tail+0x3a3/0x460
[   11.129582]   [<c1a9e0ce>] ip6_dst_lookup_flow+0x2e/0x80
[   11.130014]   [<c1ad18e0>] ip6_datagram_connect+0x150/0x4e0
[   11.130014]   [<c1a4d0b5>] inet_dgram_connect+0x25/0x70
[   11.130014]   [<c198dd61>] SYSC_connect+0xa1/0xc0
[   11.130014]   [<c198f571>] SyS_connect+0x11/0x20
[   11.130014]   [<c198fe6b>] SyS_socketcall+0x12b/0x300
[   11.130014]   [<c1bbf880>] syscall_call+0x7/0xb
[   11.130014] irq event stamp: 1184
[   11.130014] hardirqs last  enabled at (1184): [<c1086901>] local_bh_enable+0x71/0x110
[   11.130014] hardirqs last disabled at (1183): [<c10868cd>] local_bh_enable+0x3d/0x110
[   11.130014] softirqs last  enabled at (0): [<c108014d>] copy_process.part.42+0x45d/0x11a0
[   11.130014] softirqs last disabled at (1147): [<c1086e05>] irq_exit+0xa5/0xb0
[   11.130014]
[   11.130014] other info that might help us debug this:
[   11.130014]  Possible unsafe locking scenario:
[   11.130014]
[   11.130014]        CPU0
[   11.130014]        ----
[   11.130014]   lock(&stats->syncp.seq#6);
[   11.130014]   <Interrupt>
[   11.130014]     lock(&stats->syncp.seq#6);
[   11.130014]
[   11.130014]  *** DEADLOCK ***
[   11.130014]
[   11.130014] 3 locks held by init/4483:
[   11.130014]  #0:  (rcu_read_lock){.+.+..}, at: [<c109363c>] SyS_setpriority+0x4c/0x620
[   11.130014]  #1:  (((&ifa->dad_timer))){+.-...}, at: [<c108c1c0>] call_timer_fn+0x0/0xf0
[   11.130014]  #2:  (rcu_read_lock){.+.+..}, at: [<c1ab6494>] ndisc_send_skb+0x54/0x5d0
[   11.130014]
[   11.130014] stack backtrace:
[   11.130014] CPU: 0 PID: 4483 Comm: init Not tainted 3.12.0-rc1+ #68
[   11.130014] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[   11.130014]  00000000 00000000 c55e5c10 c1bb0e71 c57128b0 c55e5c4c c1badf79 c1ec1123
[   11.130014]  c1ec1484 00001183 00000000 00000000 00000001 00000003 00000001 00000000
[   11.130014]  c1ec1484 00000004 c5712dcc 00000000 c55e5c84 c10de492 00000004 c10755f2
[   11.130014] Call Trace:
[   11.130014]  [<c1bb0e71>] dump_stack+0x4b/0x66
[   11.130014]  [<c1badf79>] print_usage_bug+0x1d3/0x1dd
[   11.130014]  [<c10de492>] mark_lock+0x282/0x2f0
[   11.130014]  [<c10755f2>] ? kvm_clock_read+0x22/0x30
[   11.130014]  [<c10dd8b0>] ? check_usage_backwards+0x150/0x150
[   11.130014]  [<c10e0e74>] __lock_acquire+0x584/0x1af0
[   11.130014]  [<c10b1baf>] ? sched_clock_cpu+0xef/0x190
[   11.130014]  [<c10de58c>] ? mark_held_locks+0x8c/0xf0
[   11.130014]  [<c10e2996>] lock_acquire+0x96/0xd0
[   11.130014]  [<c1ab80c2>] ? ndisc_send_ns+0xe2/0x130
[   11.130014]  [<c1ab66d3>] ndisc_send_skb+0x293/0x5d0
[   11.130014]  [<c1ab80c2>] ? ndisc_send_ns+0xe2/0x130
[   11.130014]  [<c1ab80c2>] ndisc_send_ns+0xe2/0x130
[   11.130014]  [<c108cc32>] ? mod_timer+0xf2/0x160
[   11.130014]  [<c1aa706e>] ? addrconf_dad_timer+0xce/0x150
[   11.130014]  [<c1aa70aa>] addrconf_dad_timer+0x10a/0x150
[   11.130014]  [<c1aa6fa0>] ? addrconf_dad_completed+0x1c0/0x1c0
[   11.130014]  [<c108c233>] call_timer_fn+0x73/0xf0
[   11.130014]  [<c108c1c0>] ? __internal_add_timer+0xb0/0xb0
[   11.130014]  [<c1aa6fa0>] ? addrconf_dad_completed+0x1c0/0x1c0
[   11.130014]  [<c108c5b1>] run_timer_softirq+0x141/0x1e0
[   11.130014]  [<c1086b20>] ? __do_softirq+0x70/0x1b0
[   11.130014]  [<c1086b70>] __do_softirq+0xc0/0x1b0
[   11.130014]  [<c1086e05>] irq_exit+0xa5/0xb0
[   11.130014]  [<c106cfd5>] smp_apic_timer_interrupt+0x35/0x50
[   11.130014]  [<c1bbfbca>] apic_timer_interrupt+0x32/0x38
[   11.130014]  [<c10936ed>] ? SyS_setpriority+0xfd/0x620
[   11.130014]  [<c10e26c9>] ? lock_release+0x9/0x240
[   11.130014]  [<c10936d7>] ? SyS_setpriority+0xe7/0x620
[   11.130014]  [<c1bbee6d>] ? _raw_read_unlock+0x1d/0x30
[   11.130014]  [<c1093701>] SyS_setpriority+0x111/0x620
[   11.130014]  [<c109363c>] ? SyS_setpriority+0x4c/0x620
[   11.130014]  [<c1bbf880>] syscall_call+0x7/0xb
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Acked-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: James Morris <jmorris@namei.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/1381186321-4906-5-git-send-email-john.stultz@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      5ac68e7c
  61. 22 10月, 2013 1 次提交
  63. 20 10月, 2013 1 次提交
  65. 24 9月, 2013 1 次提交
  67. 01 9月, 2013 1 次提交
  69. 26 8月, 2013 1 次提交
  71. 03 7月, 2013 1 次提交
    • H
      ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size · 75a493e6
      由 Hannes Frederic Sowa 提交于 
      If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track
of this when appending the second frame on a corked socket. This results
in the following splat:

[37598.993962] ------------[ cut here ]------------
[37598.994008] kernel BUG at net/core/skbuff.c:2064!
[37598.994008] invalid opcode: 0000 [#1] SMP
[37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat
+nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi
+scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm
[37598.994008]  snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc
+dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video
[37598.994008] CPU 0
[37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG
[37598.994008] RIP: 0010:[<ffffffff815443a5>]  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008] RSP: 0018:ffff88003670da18  EFLAGS: 00010202
[37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0
[37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00
[37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040
[37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8
[37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000
[37598.994008] FS:  00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000
[37598.994008] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0
[37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0)
[37598.994008] Stack:
[37598.994008]  ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8
[37598.994008]  ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200
[37598.994008]  0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4
[37598.994008] Call Trace:
[37598.994008]  [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0
[37598.994008]  [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0
[37598.994008]  [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40
[37598.994008]  [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10
[37598.994008]  [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90
[37598.994008]  [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0
[37598.994008]  [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30
[37598.994008]  [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0
[37598.994008]  [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0
[37598.994008]  [<ffffffff8153d97d>] sys_sendto+0x12d/0x180
[37598.994008]  [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0
[37598.994008]  [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240
[37598.994008]  [<ffffffff8166a7e7>] tracesys+0xdd/0xe2
[37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48
[37598.994008] RIP  [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330
[37598.994008]  RSP <ffff88003670da18>
[37599.007323] ---[ end trace d69f6a17f8ac8eee ]---

While there, also check if path mtu discovery is activated for this
socket. The logic was adapted from ip6_append_data when first writing
on the corked socket.

This bug was introduced with commit
0c183379 ("ipv6: fix incorrect ipsec
fragment").

v2:
a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE.
b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao
   feng, thanks!).
c) Change mtu to unsigned int, else we get a warning about
   non-matching types because of the min()-macro type-check.
Acked-by: NGao feng <gaofeng@cn.fujitsu.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      75a493e6
  73. 27 6月, 2013 1 次提交