- 01 9月, 2008 1 次提交
-
-
由 Russell King 提交于
Add asm/cputype.h, moving functions and definitions from asm/system.h there. Convert all users of 'processor_id' to the more efficient read_cpuid_id() function. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 8月, 2008 1 次提交
-
-
由 Tomasz Chmielewski 提交于
This patch against 2.6.27-rc3 does the following changes to FSG-3 setup code: 1) Enable RTC on FSG-3 (proper name is needed). This change is needed due to a recent change in i2c. 2) i variable is only used when compiling for big endian. So move its declaration to ARMEB ifdef to silence the warning when compiling for LE. Mailing list link: http://lists.arm.linux.org.uk/lurker/message/20080813.091556.cae2917e.en.htmlSigned-off-by: NTomasz Chmielewski <mangoo@wpkg.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 8月, 2008 2 次提交
-
-
由 Russell King 提交于
This just leaves include/asm-arm/plat-* to deal with. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Remove includes of asm/hardware.h in addition to asm/arch/hardware.h. Then, since asm/hardware.h only exists to include asm/arch/hardware.h, update everything to directly include asm/arch/hardware.h and remove asm/hardware.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 7月, 2008 1 次提交
-
-
由 Dmitry Baryshkov 提交于
IRQT_* and __IRQT_* were obsoleted long ago by patch [3692/1]. Remove them completely. Sed script for the reference: s/__IRQT_RISEDGE/IRQ_TYPE_EDGE_RISING/g s/__IRQT_FALEDGE/IRQ_TYPE_EDGE_FALLING/g s/__IRQT_LOWLVL/IRQ_TYPE_LEVEL_LOW/g s/__IRQT_HIGHLVL/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_RISING/IRQ_TYPE_EDGE_RISING/g s/IRQT_FALLING/IRQ_TYPE_EDGE_FALLING/g s/IRQT_BOTHEDGE/IRQ_TYPE_EDGE_BOTH/g s/IRQT_LOW/IRQ_TYPE_LEVEL_LOW/g s/IRQT_HIGH/IRQ_TYPE_LEVEL_HIGH/g s/IRQT_PROBE/IRQ_TYPE_PROBE/g s/IRQT_NOEDGE/IRQ_TYPE_NONE/g Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 10 7月, 2008 1 次提交
-
-
由 Philipp Zabel 提交于
The pxa2xx_udc.c driver is renamed to pxa25x_udc.c (the platform driver name changes from pxa2xx-udc to pxa25x-udc) and the platform driver name of pxa27x_udc.c is fixed to pxa27x-udc. pxa_device_udc in devices.c is split into pxa25x and pxa27x flavors and the pxa27x_device_udc is enabled in pxa27x.c. Signed-off-by: NPhilipp Zabel <philipp.zabel@gmail.com> Acked-by: NNicolas Pitre <nico@cam.org> Acked-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Including from Ian Molton: Fixes for mistakes left over from the PXA2{5,7}X UDC split. Signed-off-by: NIan Molton <spyro@f2s.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 4月, 2008 1 次提交
-
-
由 Jean Delvare 提交于
Based on earlier work by Jon Smirl and Jochen Friedrich. Update most new-style i2c drivers to use standard module aliasing instead of the old driver_name/type driver matching scheme. I've left the video drivers apart (except for SoC camera drivers) as they're a bit more diffcult to deal with, they'll have their own patch later. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: Jon Smirl <jonsmirl@gmail.com> Cc: Jochen Friedrich <jochen@scram.de>
-
- 29 4月, 2008 1 次提交
-
-
由 Krzysztof Halasa 提交于
Adds a driver for built-in IXP4xx Ethernet ports. Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 04 4月, 2008 1 次提交
-
-
由 Rod Whitby 提交于
The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 06 3月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 07 2月, 2008 1 次提交
-
-
由 Richard Purdie 提交于
As discussed on LKML some notion of 'function' is needed in LED naming. This patch adds this to the documentation and standardises existing LED drivers. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
- 04 2月, 2008 12 次提交
-
-
由 Rod Whitby 提交于
There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file and remove superfluous header includes. -- Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file and remove superfluous header includes. -- Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
There is no reason to have power control in a separate file from the board setup code. Merge it back into the board setup file, removing superfluous header includes and removing superfluous constants from the machine header file. -- Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig. Sets up the corresponding platform data for the nslu2 and nas100d boards, and reads the ethernet MAC address from the internal flash. Tested on both little-endian and big-endian kernels. Tested-by: NTom King <tom@websb.net> Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NMichael Westerhof <mwester@dls.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
These are the only three boards to use the IXP4XX-GPIO-LED driver, and they can all use the new leds-gpio driver instead with no change in functionality. -- Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
Adds IXDP425 platform support for two built-in 10/100 Ethernet ports. This patch will do nothing until the actual Ethernet driver is also included. Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Krzysztof Halasa 提交于
This patch adds drivers for IXP4xx hardware Queue Manager and for Network Processor Engines. Requires patch #4712 (reading/writing CPU feature (aka fuse) bits). Posted to linux-arm-kernel on 2 Dec 2007 and revised. Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
Register the i2c board info related to the RTC chip on the dsmg600 board to allow it to be found automatically on boot. Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
Register the i2c board info related to the RTC chip on the nas100d board to allow it to be found automatically on boot. Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
Register the i2c board info related to the RTC chip on the nslu2 board to allow it to be found automatically on boot. Signed-off-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
* Remove the superfluous declaration of ctrl_alt_del(). * Convert GPIO and IRQ handling to use the <asm/gpio.h> api. * Perform the reset on the release of the power button, so that NAS devices which have been set to auto-power-on (by solder bridging the power button) do not continuously power cycle. * Remove all superflous constants from dsmg600.h Signed-off-by: NRod Whitby <rod@whitby.id.au> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Rod Whitby 提交于
* Convert GPIO and IRQ handling to use the <asm/gpio.h> api. * Perform the reset only after the power button has been held down for at least two seconds. Do the reset on the release of the power button, so that NAS devices which have been set to auto-power-on (by solder bridging the power button) do not continuously power cycle. * Remove all superflous constants from nas100d.h * Add LED constants to nas100d.h while we're there. * Update the board LED setup code to use those constants. Signed-off-by: NRod Whitby <rod@whitby.id.au> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 28 1月, 2008 1 次提交
-
-
由 Michael-Luke Jones 提交于
Migrate all ixp4xx devices to the bitbanging I2C bus driver utilizing the arch-neutral GPIO API (linux/i2c-gpio.h). Tested by the nslu2-linux and openwrt projects in public firmware releases. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Acked-by: NRod Whitby <rod@whitby.id.au> Signed-off-by: NJean Delvare <khali@linux-fr.org>
-
- 26 1月, 2008 1 次提交
-
-
由 Lucas Woods 提交于
Signed-off-by: NLucas Woods <woodzy@gmail.com> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 12月, 2007 1 次提交
-
-
由 Kevin Hilman 提交于
Add proper support for CLOCK_EVT_MODE_RESUME and in the process fix CLOCK_EVT_MODE_SHUTDOWN so that only the enable bits are toggled for both. Signed-off-by: NKevin Hilman <khilman@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 7月, 2007 1 次提交
-
-
由 Thomas Gleixner 提交于
We need to make sure, that the clockevent devices are resumed, before the tick is resumed. The current resume logic does not guarantee this. Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock event devices before resuming the tick / oneshot functionality. Fixup the existing users. Thanks to Nigel Cunningham for tracking down a long standing thinko, which affected the jinxed VAIO. [akpm@linux-foundation.org: xen build fix] Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: john stultz <johnstul@us.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 7月, 2007 1 次提交
-
-
由 Tim Harvey 提交于
I believe that the following patch is necessary to properly configure GPIO line configuration for IRQ's which are mapped to a GPIO line >= 8 (without this patch the wrong GPIO is configured as an input.) Signed-off-by: NTim Harvey <tim_harvey@yahoo.com> Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 12 7月, 2007 5 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Michael-Luke Jones 提交于
This patch fixes up compiling of the gtwx5715 board setup code, which has apparently been broken since 2.6.18 and the generic IRQ changes. In addition it removes some unecessary extern declarations in the gtwx5715-pci.c file. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Imre Kaloz 提交于
This patch provides support for the Netgear WG302 v2 and WAG302 v2 AccessPoint series. This patch relies on the patch "Gateway 7001 series support" minimally, as they only have UART2 connected. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NDeepak Saxena <dsaxena@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Imre Kaloz 提交于
This patch provides support for the Gateway 7001 AccessPoint series. Updated to stay below the 80 char limit in uncompress.h Signed-off-by: NImre Kaloz <kaloz@openwrt.org> Signed-off-by: NDeepak Saxena <dsaxena@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Vladimir Barinov 提交于
IXDP425 NAND support (arch specific part). The generic platform driver that is used by ixdp425 platfrom is already in upstream kernel in 2.6.22-rc1. Signed-off-by: NVladimir Barinov <vbarinov@ru.mvista.com> Signed-off-by: NRuslan Sushko <rsushko@ru.mvista.com> Signed-off-by: NDeepak Saxena <dsaxena@mvista.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 30 5月, 2007 1 次提交
-
-
由 Michael-Luke Jones 提交于
This patch removes apparently unnecessary extern declarations in coyote-pci.c and ixdpg425-pci.c within arch/arm/mach-ixp4xx and has been compile-tested without producing warnings or errors. Kernel coding style forbids the use of extern declarations within .c files. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 26 5月, 2007 3 次提交
-
-
由 Michael-Luke Jones 提交于
This trivial patch updates the nslu2 and nas-100d headers to remove pointless GPIO defines, and updates nslu2-setup.c accordingly. In addition minor style cleanups to some comments are included. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Michael-Luke Jones 提交于
This patch is required as the frequency fixup in nslu2_init does not run sufficiently early in the boot sequence to take effect. In addition the dsmg600 setup code behaviour has been improved such that a 'fixup' routine is avoided. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Michael-Luke Jones 提交于
Avila and IXDP4xx support were separated in 2.6.21 so this comment isn't correct any more. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 21 5月, 2007 1 次提交
-
-
由 Simon Arlott 提交于
Spelling fixes in arch/arm/. Signed-off-by: NSimon Arlott <simon@fire.lp0.eu> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 5月, 2007 1 次提交
-
-
由 Bernhard Walle 提交于
Add IRQF_IRQPOLL for each timer interrupt. Signed-off-by: NBernhard Walle <bwalle@suse.de> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 5月, 2007 1 次提交
-
-
由 Michael-Luke Jones 提交于
This patch adds support for the D-Link DSM-G600 Rev A. This is an ARM XScale IXP4xx system relatively similar to the NSLU2 and NAS-100D already supported by mainline. An important difference is Gigabit Ethernet support using the Via Velocity chipset. This patch is the combined work of Michael Westerhof and Alessandro Zummo, with contributions from Michael-Luke Jones. This version addresses review comments from rmk and Deepak Saxena. Signed-off-by: NMichael-Luke Jones <mlj28@cam.ac.uk> Signed-off-by: NAlessandro Zummo <a.zummo@towertech.it> Signed-off-by: NMichael Westerhof <mwester@dls.net> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-