Move towards atomic by using the legacy modeset's drm_atomic_state
instead.

v2: Move call to drm_atomic_add_affected_connectors() to
    intel_modeset_compute_config(). (Daniel)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Resurrect the ret local variable which I've dropped from an
earlier patch and which is now needed.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With this in place, we can start converting pieces of the modeset code
to look at the connector atomic state instead of the staged config.

v2: Handle the load detect staged config changes too. (Ander)
    Remove unnecessary blank line. (Daniel)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Keep that state updated so that we can write code that depends on it on
the follow up patches.

v2: Fix BUG due to stale connector_state->crtc value. (Chandra)

v3: Update comment about dummy state connectors. (Chandra)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For consistency, allocate a new crtc_state for a crtc that is being
disabled. Previously only the enabled value of the current state would
change.

v2: Rebase on v5 of previous patch. (Ander)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Resolve rebase conflict.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For the atomic conversion, the mode set paths need to be changed to rely
on an atomic state instead of using the staged config. By using an
atomic state for the legacy code, we will be able to convert the code
base in small chunks.

v2: Squash patch that adds stat argument to intel_set_mode(). (Ander)
    Make every caller of intel_set_mode() allocate state. (Daniel)
    Call drm_atomic_state_clear() in set config's error path. (Daniel)

v3: Copy staged config to atomic state in force restore path. (Ander)

v4: Don't update ->new_config for disabled pipes in __intel_set_mode(),
    since it is expected to be NULL in that case. (Ander)

v5: Don't change return type of intel_modeset_pipe_config(). (Chandra)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
[danvet: Remove spurious ret local variable due to changes in v5.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For now this is not necessary since intel_set_mode() doesn't acquire any
new locks. However, once that function is converted to atomic, that will
change, since we'll pass an atomic state to it, and that needs to have
the right acquire context set.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we only set preserve_bios_swizzling when the initial fb is
shared and totally miss the single-screen case. Fix this by
consolidating all the logic for both cases.

This seems to go back to when swizzle preservation was originally
merged in

commit d9ceb816
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Oct 9 12:57:43 2014 -0700

    drm/i915: preserve swizzle settings if necessary v4

Cc: Kristian Høgsberg <hoegsberg@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

In spirit with

commit 5724dbd1
Author: Damien Lespiau <damien.lespiau@intel.com>
Date:   Tue Jan 20 12:51:52 2015 +0000

    drm/i915: Rename plane_config to initial_plane_config

to make it clear that this code is all special-purpose for the initial
plane takeover.

Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>

This is a very similar bug in the load detect code fixed in

commit 9128b040
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Mar 3 17:31:21 2015 +0100

    drm/i915: Fix modeset state confusion in the load detect code

But this time around it was the initial fb code that forgot to update
the plane->crtc pointer. Otherwise it's the exact same bug, with the
exact same restrains (any set_config call/ioctl that doesn't disable
the pipe papers over the bug for free, so fairly hard to hit in normal
testing). So if you want the full explanation just go read that one
over there - it's rather long ...

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Josh Boyer <jwboyer@fedoraproject.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-and-tested-by: NJosh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This flag was being mostly used as a meta flag in some
cases and not covering other cases.

One of the risks is that it was masking some frontbuffer
trackings without disabling PSR.

So, better to kill this at once and avoid umbrella parameters.
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Drop unused out: label to appease gcc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Or users can just spam the log all they want.

Issue introduced in

commit 9a8f0a12
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Fri Feb 27 11:15:24 2015 +0000

    drm/i915/skl: Allow Y (and Yf) frame buffer creation

References: https://bugs.freedesktop.org/show_bug.cgi?id=89628Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Pass in rotation info to sprite plane updates as well.

v3: Use helper to determine 90/270 rotation. (Michel Thierry)

v4: Rebased for fb modifiers and atomic changes.

For: VIZ-4546
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v3)
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Need to do this in order to support 90/270 rotated display.

v2: Pass in drm_plane instead of plane index to intel_obj_display_address.

v3:
    * Renamed intel_obj_display_address to intel_plane_obj_offset.
      (Chris Wilson)
    * Simplified rotation check to bitwise AND. (Chris Wilson)

v4:
    * Extracted 90/270 rotation check into a helper function. (Michel Thierry)

v5:
    * Rebased for ggtt view changes.

For: VIZ-4545
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NMichel Thierry <michel.thierry@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

90/270 rotated scanout needs a rotated GTT view of the framebuffer.

This is put in a separate VMA with a dedicated ggtt view and wired such that
it is created when a framebuffer is pinned to a 90/270 rotated plane.

Rotation is only possible with Yb/Yf buffers and error is propagated to
user space in case of a mismatch.

Special rotated page view is constructed at the VMA creation time by
borrowing the DMA addresses from obj->pages.

v2:
    * Do not bother with pages for rotated sg list, just populate the DMA
      addresses. (Daniel Vetter)
    * Checkpatch cleanup.

v3:
    * Rebased on top of new plane handling (create rotated mapping when
      setting the rotation property).
    * Unpin rotated VMA on unpinning from display plane.
    * Simplify rotation check using bitwise AND. (Chris Wilson)

v4:
    * Fix unpinning of optional rotated mapping so it is really considered
      to be optional.

v5:
   * Rebased for fb modifier changes.
   * Rebased for atomic commit.
   * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter)

v6:
   * Rebased after preparatory work has been extracted out. (Daniel Vetter)

v7:
   * Slightly simplified tiling geometry calculation.
   * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter)

v8:
   * Do not use i915_gem_obj_size to get object size since that actually
     returns the size of an VMA which may not exist.
   * Rebased for ggtt view changes.

v9:
   * Rebased after code review changes on the preceding patches.
   * Tidy function definitions. (Joonas Lahtinen)

For: VIZ-4726
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4)
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For now only default implementation defaulting to normal view.

v2: Some code review cleanups. (Joonas Lahtinen)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v2)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Plane state carries the rotation information which is needed for determining
the appropriate GGTT view type.

This just adds the parameter with the actual usage coming in future patches.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

To support frame buffer rotation we need to be able to pass on the information
on what kind of GGTT view is required for display.

This patch just adds the parameter and makes all the callers default to the
normal view.

v2: Rebased for ggtt view changes.
v3: Don't limit PIN_MAPPABLE to normal views just yet. (Joonas Lahtinen)
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v3)
[danvet: s/BUG/WARN/ in the patch hunk because. At least where the
BUG_ON isn't fatal right away.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It will be used in a later patch and also convert all height parameters
from int to unsigned int.

v2: Rebased for fb modifiers.
v3: Fixed v2 rebase.
v4:
   * Height should be unsigned int.
   * Make it take pixel_format for consistency and simplicity.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v1)
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (v4)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Prepare chv_find_best_dpll to be used for BXT too, where we want to
consider the error between target and calculated frequency too when
choosing a better PLL configuration.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Factor out the logic to decide whether the newly calculated dividers are
better than the best found so far. Do this for clarity and to prepare
for the upcoming BXT helper needing the same.

No functional change.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_plane->obj is not used anymore so kill it. Also don't pass both
the fb and obj to the sprite .update_plane() hook, as just passing the fb
is enough.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Rewrite commit 31685c25
Author: Deepak S <deepak.s@linux.intel.com>
Date:   Thu Jul 3 17:33:01 2014 -0400

    drm/i915/vlv: WA for Turbo and RC6 to work together.

Other than code clarity, the major improvement is to disable the extra
interrupts generated when idle.  However, the reclocking remains rather
slow under the new manual regime, in particular it fails to downclock as
quickly as desired. The second major improvement is that for certain
workloads, like games, we need to combine render+media activity counters
as the work of displaying the frame is split across the engines and both
need to be taken into account when deciding the global GPU frequency as
memory cycles are shared.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Deepak S <deepak.s@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Deepak S<deepak.s@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We don't want to end up in a state where we track that the pipe has its
primary plane enabled when primary plane registers are programmed with
values that look possible but the plane actually disabled.

Refuse to read out the fb state when the primary plane isn't enabled.
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: NAndrey Skvortsov <andrej.skvortzov@gmail.com>
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Reference: http://mid.gmane.org/20150203191507.GA2374@crion86Tested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

We accidentally pass 'pipe' instead of 'port' to CHV_PLL_DW8() and
with PIPE_C we end up at register offset 0x8320 which isn't the
0x8020 we wanted. Fix it.

The problem was fortunately caught by the sanity check in vlv_dpio_read():
WARNING: CPU: 1 PID: 238 at ../drivers/gpu/drm/i915/intel_sideband.c:200 vlv_dpio_read+0x77/0x80 [i915]()
DPIO read pipe C reg 0x8320 == 0xffffffff

The problem got introduced with this commit:
 commit 71af07f91f12bbab96335e202c82525d31680960
 Author: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
 Date:   Thu Mar 5 19:33:08 2015 +0530

    drm/i915: Update prop, int co-eff and gain threshold for CHV

Cc: Vijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NTodd Previte <tprevite@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Ignore the current state of the pipe and just check crtc_state->enable
and the number of FDI lanes required. This means we don't accidentally
mistake the FDI lanes as being available of one of the pipes just
happens to be disabled at the time of the check. Also we no longer
consider pipe C to require FDI lanes when it's driving the eDP
transcoder.

We also take the opportunity to make the code a bit nicer looking by
hiding the ugly bits in the new pipe_required_fdi_lanes() function.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The logic in the FDI lane checks is very hard for my poor brain to
grasp. Rewrite it in a more straightforward way.

Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Remove the global modeset resource function that would disable the
bifurcation bit, and instead enable/disable it when enabling the pch
transcoder. The mode set consistency check should prevent us from
disabling the bit if pipe C is enabled so the change should be safe.

Note that this doens't affect the logic that prevents the bit being
set while a pipe is active, since the patch retains the behavior of
only chaging the bit if necessary. Because of the checks during mode
set, the first change would necessarily happen with both pipes B and
C disabled, and any subsequent write would be skipped.

v2: Only change the bit during pch trancoder enable. (Ville)
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No need to go dig throguh intel_crtc->base.cursor when we already have
the same thing as 'plane' local variable.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These are now called from the plane commit hooks, so they really need to
be fast or else we risk atomic update failures. So kill the debug prints
which are slowing things down massively.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NMatt Roper <matthew.d.roper@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_user_framebuffer_destroy() requires the struct_mutex for its
object bookkeeping, so this means that all calls to
drm_framebuffer_unreference must not hold that lock.

Regression from commit ab8d6675
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date:   Mon Feb 2 15:44:15 2015 +0000

    drm/i915: Track old framebuffer instead of object

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=89166
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
[danvet: Clarify commit message slightly.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

PFI credit programming is required when CD clock (related to data flow from
display pipeline to end display) is greater than CZ clock (related to data
flow from memory to display plane). This programming should be done when all
planes are OFF to avoid intermittent hangs while accessing memory even from
different Gfx units (not just display).

If cdclk/czclk >=1, PFI credits could be set as any number. To get better
performance, larger PFI credit can be assigned to PND. Otherwise if
cdclk/czclk<1, the default PFI credit of 8 should be set.

v2:
    - Change log to lower log level instead of DRM_ERROR
    - Change function name to valleyview_program_pfi_credits
    - Move program PFI credits to modeset_init instead of intel_set_mode
    - Change magic numbers to logical constants

[vsyrjala v3:
 - only program in response to cdclk update
 - program the credits also when cdclk<czclk
 - add CHV bits
 v4:
 - Change CHV cdclk<czclk credits to 12 (Vijay)]
Signed-off-by: NVidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: NGajanan Bhat <gajanan.bhat@intel.com>
Signed-off-by: NVandana Kannan <vandana.kannan@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch implements latest PHY changes in Gain, prop and int co-efficients
based on the vco freq.

v2: Split the original changes into multiple smaller patches based on
review by Ville

v3: Addressed Ville's review comments. Fixed the error introduced in v2.
Clear the old bits before we modify those bits as part of RMW.

v4: TDC target cnt is 10 bits and not 8 bits (Ville)
Signed-off-by: NVijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Initialize lock detect threshold and select coarse threshold for the
case where M2 fraction division is disabled.

v2: Split the changes into multiple smaller patches (Ville)
v3: Clear out the old bits before we modify those bits as RMW (Ville)
v4: Reset coarse threshold when M2 fraction is enabled (Ville)
Signed-off-by: NVijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2 : Handle M2 frac division for both M2 frac and int cases

v3 : Addressed Ville's review comments. Cleared the old bits for RMW

v4 : Fix feedfwd gain (Ville)
Signed-off-by: NVijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: NVille Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the switch to atomic plumbing for planes, some of our commit-time
work (e.g., watermarks) is done after the new atomic state is swapped
into the relevant DRM object, but before the DRM core has a chance to
update its legacy state values.  Switch intel_crtc_active() to look at
the state objects rather than legacy fields to ensure we operate on the
proper values.

Note that we're continuing to use intel_crtc->active here for the time
being since crtc->state isn't really hooked up yet.  Once CRTC states
are wired up properly, we'll want to switch this over to use
crtc->state->active instead.

v2: Switch back to intel_crtc->active for now; when Ander's work on CRTC
    states is ready, we can flip this over to use crtc->state->active
    instead. (Ville)

Cc: Ander Conselvan De Oliveira <conselvan2@gmail.com>
Suggested-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The specs seem to be full of misinformation wrt. the Punit register
0x36. Some versions still show the old VLV bit layout, some the new
layout, and all of them seem to tell us nonsense about the cdclk
value encoding.

Testing on actual hardware has shown that we simply need to program
the desired CCK divider into the Punit register using the new layout of
the bits. Doing that, the status bit change to indicate the same value,
and the CCK 0x6b register also changes accordingly to indicate that CCK
is now using the new divider.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: NYogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Supposedly CHV can sustain a pixel clock of up to 95% of
cdclk, as opposed to the 90% limit that was used old older
platforms. Update the cdclk selection code to allow for this.

This will allow eg. HDMI 4k modes with their 297MHz pixel clock
while still respecting the 320 MHz cdclk limit on CHV.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVijay Purushothaman <vijay.a.purushothaman@linux.intel.com>
Reviewed-by: NYogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

So try to enumerate eDP unconditionally in those cases.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
[danvet: Add wa tag Damien dug out.]
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Apparently, this has never worked reliably and is currently disabled. Also, the
gains are not particularly impressive. Thus rather than try to keep unused code
from decaying and having to update it for other driver changes, it was decided
to simply remove it.

For: VIZ-5115
Signed-off-by: NJohn Harrison <John.C.Harrison@Intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>