Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 18 3月, 2009 1 次提交
  3. 15 3月, 2009 3 次提交
    • J
      x86: allow extend_brk users to reserve brk space · 796216a5
      由 Jeremy Fitzhardinge 提交于 
      Impact: new interface; remove hard-coded limit

Add RESERVE_BRK(name, size) macro to reserve space in the brk
area.  This should be a conservative (ie, larger) estimate of
how much space might possibly be required from the brk area.
Any unused space will be freed, so there's no real downside
on making the reservation too large (within limits).

The name should be unique within a given file, and somewhat
descriptive.

The C definition of RESERVE_BRK() ends up being more complex than
one would expect to work around a cluster of gcc infelicities:

  The first attempt was to simply try putting __section(.brk_reservation)
  on a variable.  This doesn't work because it ends up making it a
  @progbits section, which gets actual space allocated in the vmlinux
  executable.

  The second attempt was to emit the space into a section using asm,
  but gcc doesn't allow arguments to be passed to file-level asm()
  statements, making it hard to pass in the size.

  The final attempt is to wrap the asm() in a function to allow
  it to have arguments, and put the function itself into the
  .discard section, which vmlinux*.lds drops entirely from the
  emitted vmlinux.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      796216a5
    • J
      x86-32: use brk segment for allocating initial kernel pagetable · ccf3fe02
      由 Jeremy Fitzhardinge 提交于 
      Impact: use new interface instead of previous ad hoc implementation

Rather than having special purpose init_pg_table_start/end variables
to delimit the kernel pagetable built by head_32.S, just use the brk
mechanism to extend the bss for the new pagetable.

This patch removes init_pg_table_start/end and pg0, defines __brk_base
(which is page-aligned and immediately follows _end), initializes
the brk region to start there, and uses it for the 32-bit pagetable.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      ccf3fe02
    • J
      x86: add brk allocation for very, very early allocations · 93dbda7c
      由 Jeremy Fitzhardinge 提交于 
      Impact: new interface

Add a brk()-like allocator which effectively extends the bss in order
to allow very early code to do dynamic allocations.  This is better than
using statically allocated arrays for data in subsystems which may never
get used.

The space for brk allocations is in the bss ELF segment, so that the
space is mapped properly by the code which maps the kernel, and so
that bootloaders keep the space free rather than putting a ramdisk or
something into it.

The bss itself, delimited by __bss_stop, ends before the brk area
(__brk_base to __brk_limit).  The kernel text, data and bss is reserved
up to __bss_stop.

Any brk-allocated data is reserved separately just before the kernel
pagetable is built, as that code allocates from unreserved spaces
in the e820 map, potentially allocating from any unused brk memory.
Ultimately any unused memory in the brk area is used in the general
kernel memory pool.

Initially the brk space is set to 1MB, which is probably much larger
than any user needs (the largest current user is i386 head_32.S's code
to build the pagetables to map the kernel, which can get fairly large
with a big kernel image and no PSE support).  So long as the system
has sufficient memory for the bootloader to reserve the kernel+1MB brk,
there are no bad effects resulting from an over-large brk.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
      93dbda7c
  5. 26 2月, 2009 2 次提交
  7. 23 2月, 2009 1 次提交
    • I
      x86: refactor x86_quirks support · 8e6dafd6
      由 Ingo Molnar 提交于 
      Impact: cleanup

Make x86_quirks support more transparent. The highlevel
methods are now named:

  extern void x86_quirk_pre_intr_init(void);
  extern void x86_quirk_intr_init(void);

  extern void x86_quirk_trap_init(void);

  extern void x86_quirk_pre_time_init(void);
  extern void x86_quirk_time_init(void);

This makes it clear that if some platform extension has to
do something here that it is considered ... weird, and is
discouraged.

Also remove arch_hooks.h and move it into setup.h (and other
header files where appropriate).
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8e6dafd6
  9. 18 2月, 2009 1 次提交
  11. 03 2月, 2009 1 次提交
    • J
      headers_check fix: x86, setup.h · 15c55443
      由 Jaswinder Singh Rajput 提交于 
      fix the following 'make headers_check' warning:

  usr/include/asm/setup.h:16: extern's make no sense in userspace
  usr/include/asm/setup.h:17: extern's make no sense in userspace
  usr/include/asm/setup.h:23: extern's make no sense in userspace
  usr/include/asm/setup.h:24: extern's make no sense in userspace
  usr/include/asm/setup.h:51: extern's make no sense in userspace
  usr/include/asm/setup.h:52: extern's make no sense in userspace
Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com>
      15c55443
  13. 16 1月, 2009 1 次提交
  15. 15 1月, 2009 1 次提交
  17. 04 1月, 2009 3 次提交
  19. 18 11月, 2008 2 次提交
    • Y
      x86: fix wakeup_cpu with numaq/es7000, v2, fix · 54ac14a8
      由 Yinghai Lu 提交于 
      Impact: fix wakeup_secondary_cpu with hotplug

We can not put that into x86_quirks, because that is __initdata.
So try to move that to genapic, and add update_genapic in x86_quirks.

later we even could use that stub to:

 1. autodetect CONFIG_ES7000_CLUSTERED_APIC
 2. more correct inquire_remote_apic with apic_verbosity setting.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      54ac14a8
    • Y
      x86: fix wakeup_cpu with numaq/es7000, v2 · 569712b2
      由 Yinghai Lu 提交于 
      Impact: fix secondary-CPU wakeup/init path with numaq and es7000

While looking at wakeup_secondary_cpu for WAKE_SECONDARY_VIA_NMI:

|#ifdef WAKE_SECONDARY_VIA_NMI
|/*
| * Poke the other CPU in the eye via NMI to wake it up. Remember that the normal
| * INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
| * won't ... remember to clear down the APIC, etc later.
| */
|static int __devinit
|wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
|{
|        unsigned long send_status, accept_status = 0;
|        int maxlvt;
|...
|        if (APIC_INTEGRATED(apic_version[phys_apicid])) {
|                maxlvt = lapic_get_maxlvt();

I noticed that there is no warning about undefined phys_apicid...

because WAKE_SECONDARY_VIA_NMI and WAKE_SECONDARY_VIA_INIT can not be
defined at the same time. So NUMAQ is using wrong wakeup_secondary_cpu.

WAKE_SECONDARY_VIA_NMI, WAKE_SECONDARY_VIA_INIT and
WAKE_SECONDARY_VIA_MIP are variants of a weird and fragile
preprocessor-driven "HAL" mechanisms to specify the kind of secondary-CPU
wakeup strategy a given x86 kernel will use.

The vast majority of systems want to use INIT for secondary wakeup - NUMAQ
uses an NMI, (old-style-) ES7000 uses 'MIP' (a firmware driven in-memory
flag to let secondaries continue).

So convert these mechanisms to x86_quirks and add a
->wakeup_secondary_cpu() method to specify the rare exception
to the sane default.

Extend genapic accordingly as well, for 32-bit.

While looking further, I noticed that functions in wakecup.h for numaq
and es7000 are different to the default in mach_wakecpu.h - but smpboot.c
will only use default mach_wakecpu.h with smphook.h.

So we need to add mach_wakecpu.h for mach_generic, to properly support
numaq and es7000, and vectorize the following SMP init methods:

	int trampoline_phys_low;
	int trampoline_phys_high;
	void (*wait_for_init_deassert)(atomic_t *deassert);
	void (*smp_callin_clear_local_apic)(void);
	void (*store_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*restore_NMI_vector)(unsigned short *high, unsigned short *low);
	void (*inquire_remote_apic)(int apicid);
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      569712b2
  21. 28 10月, 2008 1 次提交
  23. 23 10月, 2008 2 次提交
  25. 26 7月, 2008 1 次提交
  27. 23 7月, 2008 1 次提交
    • V
      x86: consolidate header guards · 77ef50a5
      由 Vegard Nossum 提交于 
      This patch is the result of an automatic script that consolidates the
format of all the headers in include/asm-x86/.

The format:

1. No leading underscore. Names with leading underscores are reserved.
2. Pathname components are separated by two underscores. So we can
   distinguish between mm_types.h and mm/types.h.
3. Everything except letters and numbers are turned into single
   underscores.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>
      77ef50a5
  29. 22 7月, 2008 1 次提交
  31. 20 7月, 2008 3 次提交
  33. 16 7月, 2008 1 次提交
  35. 11 7月, 2008 2 次提交
  37. 08 7月, 2008 12 次提交