- 04 4月, 2019 2 次提交
-
-
由 David Ahern 提交于
Update fib_table_lookup tracepoint to take a fib_nh_common struct and dump the v6 gateway address if the nexthop uses it. Over the years saddr has not proven useful and the output of the tracepoint produces very long lines. Since saddr is not part of fib_nh_common, drop it. If it needs to be added later, fib_nh which contains saddr can be obtained from a fib_nh_common via container_of. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: net/rxrpc/local_object.c: In function ‘rxrpc_open_socket’: net/rxrpc/local_object.c:175:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ret < 0) { ^ net/rxrpc/local_object.c:184:2: note: here case AF_INET: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 Currently, GCC is expecting to find the fall-through annotations at the very bottom of the case and on its own line. That's why I had to add the annotation, although the intentional fall-through is already mentioned in a few lines above. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 4月, 2019 2 次提交
-
-
由 Vlad Buslov 提交于
Action tunnel_key doesn't have a metadata/tunnel for release(decap) action. Drivers do not dereference entry->tunnel pointer for that action type, so this behavior doesn't result in a crash at the moment. However, this needs to be corrected as a preparation for updating hardware offloads API to not rely on rtnl lock, for which flow_action code will copy the tunnel data to temporary buffer to prevent concurrent action overwrite from invalidating/freeing it. Fixes: 3a7b6861 ("cls_api: add translator to flow_action representation") Signed-off-by: NVlad Buslov <vladbu@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We free "ct_info->ct" and then use it on the next line when we pass it to nf_ct_destroy_timeout(). This patch swaps the order to avoid the use after free. Fixes: 06bd2bdf ("openvswitch: Add timeout support to ct action") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NYi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2019 4 次提交
-
-
由 Florian Westphal 提交于
This fills a hole in softnet data, so no change in structure size. Also prepares for xmit_more placement in the same spot; skb->xmit_more will be removed in followup patch. Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
As Eric noticed, in .sk_destruct, sk->sk_dst_cache update is prevented, and no barrier is needed for this. So change to use rcu_dereference_protected() instead of rcu_dereference_check() to fetch sk_dst_cache in there. v1->v2: - no change, repost after net-next is open. Reported-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xiaofei Shen 提交于
Before creating a slave netdevice, get the mac address from DTS and apply in case it is valid. Signed-off-by: NXiaofei Shen <xiaofeis@codeaurora.org> Signed-off-by: NVinod Koul <vkoul@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
It turns out that struct ipv6_pinfo is not located as we think. inet6_sk_generic() and tcp_inet6_sk() disagree on 32bit kernels by 4-bytes, because struct tcp_sock has 8-bytes alignment, but ipv6_pinfo size is not a multiple of 8. sizeof(struct ipv6_pinfo): 116 (not padded to 8) I actually first coded tcp_inet6_sk() as this patch does, but thought that "container_of(tcp_sk(sk), struct tcp6_sock, tcp)" was cleaner. As Julian told me : Nobody should use tcp6_sock.inet6 directly, it should be accessed via tcp_inet6_sk() or inet6_sk(). This happened when we added the first u64 field in struct tcp_sock. Fixes: 93a77c11 ("tcp: add tcp_inet6_sk() helper") Signed-off-by: NEric Dumazet <edumazet@google.com> Bisected-by: NJulian Anastasov <ja@ssi.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2019 17 次提交
-
-
由 Julian Wiedmann 提交于
Replace the br_port_exists() macro with its twin from netdevice.h CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NJulian Wiedmann <jwi@linux.ibm.com> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 wenxu 提交于
There is currently no support for the multicast/broadcast aspects of VXLAN in ovs. In the datapath flow the tun_dst must specific. But in the IP_TUNNEL_INFO_BRIDGE mode the tun_dst can not be specific. And the packet can forward through the fdb table of vxlan devcice. In this mode the broadcast/multicast packet can be sent through the following ways in ovs. ovs-vsctl add-port br0 vxlan -- set in vxlan type=vxlan \ options:key=1000 options:remote_ip=flow ovs-ofctl add-flow br0 in_port=LOCAL,dl_dst=ff:ff:ff:ff:ff:ff, \ action=output:vxlan bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.1 \ src_vni 1000 vni 1000 self bridge fdb append ff:ff:ff:ff:ff:ff dev vxlan_sys_4789 dst 172.168.0.2 \ src_vni 1000 vni 1000 self Signed-off-by: Nwenxu <wenxu@ucloud.cn> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
TCP stack relies on the fact that a freshly allocated skb has skb->cb[] and skb_shinfo(skb)->tx_flags cleared. When recycling tx skb, we must ensure these fields are cleared. Fixes: 472c2e07 ("tcp: add one skb cache for tx") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
The number of stubs is growing and has nothing to do with addrconf. Move the definition of the stubs to a separate header file and update users. In the move, drop the vxlan specific comment before ipv6_stub. Code move only; no functional change intended. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
With fib_nh_common in place, move common initialization and release code into helpers used by both ipv4 and ipv6. For the moment, the init is just the lwt encap and the release is both the netdev reference and the the lwt state reference. More will be added later. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Acked-by: NAlexei Starovoitov <ast@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add fib_nh_common struct with common nexthop attributes. Convert fib_nh and fib6_nh to use it. Use macros to move existing fib_nh_* references to the new nh_common.nhc_*. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Rename fib6_nh entries that will be moved to a fib_nh_common struct. Specifically, the device, gateway, flags, and lwtstate are common with all nexthop definitions. In some places new temporary variables are declared or local variables renamed to maintain line lengths. Rename only; no functional change intended. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Rename fib_nh entries that will be moved to a fib_nh_common struct. Specifically, the device, oif, gateway, flags, scope, lwtstate, nh_weight and nh_upper_bound are common with all nexthop definitions. In the process shorten fib_nh_lwtstate to fib_nh_lws to avoid really long lines. Rename only; no functional change intended. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
rt6_add_nexthop and rt6_nexthop_info only need the fib6_info for the gateway flag and the nexthop weight, and the presence of a gateway is now per-nexthop. Update the signatures to take a fib6_nh and nexthop weight and better align with the ipv4 versions. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
fib6_ignore_linkdown takes a fib6_info but only looks at the net_device and its IPv6 config. Change it to take a net_device over a fib6_info as its input argument. In addition, move it to a header file to make the check inline and usable later with IPv4 code without going through the ipv6 stub, and rename to ip6_ignore_linkdown since it is only checking the setting based on the ipv6 struct on a device. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
The gateway setting is not per fib6_info entry but per-fib6_nh. Add a new fib_nh_has_gw flag to fib6_nh and convert references to RTF_GATEWAY to the new flag. For IPv6 address the flag is cheaper than checking that nh_gw is non-0 like IPv4 does. While this increases fib6_nh by 8-bytes, the effective allocation size of a fib6_info is unchanged. The 8 bytes is recovered later with a fib_nh_common change. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Move the fib6_nh cleanup code to a new helper, fib6_nh_release. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Similar to IPv4, consolidate the fib6_nh initialization into a helper. As a new standalone function, add a cleanup path to put lwtstate on error. To avoid modifying fib6_config flags, move the reject check to a helper that is invoked once by fib6_nh_init to reset the device and then again in ip6_route_info_create to set the fib6_flags. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Move the fib_nh cleanup code from free_fib_info_rcu into a new helper, fib_nh_release. Move classid accounting into fib_nh_release which is called per fib_nh to make accounting symmetrical with fib_nh_init. Export the helper to allow for use with nexthop objects in the future. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Consolidate the fib_nh initialization which is duplicated between fib_create_info for single path and fib_get_nhs for multipath. Export the helper to allow for use with nexthop objects in the future. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
in_dev lookup followed by IN_DEV_IGNORE_ROUTES_WITH_LINKDOWN check is called in several places, some with the rcu lock and others with the rtnl held. Move the check to a helper similar to what IPv6 has. Since the helper can be invoked from either context use rcu_dereference_rtnl to dereference ip_ptr. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Define fib_get_nhs to return EINVAL when CONFIG_IP_ROUTE_MULTIPATH is not enabled and remove the ifdef check for CONFIG_IP_ROUTE_MULTIPATH in fib_create_info. Signed-off-by: NDavid Ahern <dsahern@gmail.com> Reviewed-by: NIdo Schimmel <idosch@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2019 7 次提交
-
-
由 Yi-Hung Wei 提交于
Add support for fine-grain timeout support to conntrack action. The new OVS_CT_ATTR_TIMEOUT attribute of the conntrack action specifies a timeout to be associated with this connection. If no timeout is specified, it acts as is, that is the default timeout for the connection will be automatically applied. Example usage: $ nfct timeout add timeout_1 inet tcp syn_sent 100 established 200 $ ovs-ofctl add-flow br0 in_port=1,ip,tcp,action=ct(commit,timeout=timeout_1) CC: Pravin Shelar <pshelar@ovn.org> CC: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NYi-Hung Wei <yihung.wei@gmail.com> Acked-by: NPravin B Shelar <pshelar@ovn.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi-Hung Wei 提交于
This patch exports nf_ct_set_timeout() and nf_ct_destroy_timeout(). The two functions are derived from xt_ct_destroy_timeout() and xt_ct_set_timeout() in xt_CT.c, and moved to nf_conntrack_timeout.c without any functional change. It would be useful for other users (i.e. OVS) that utilizes the finer-grain conntrack timeout feature. CC: Pablo Neira Ayuso <pablo@netfilter.org> CC: Pravin Shelar <pshelar@ovn.org> Signed-off-by: NYi-Hung Wei <yihung.wei@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Currently if the driver registers devlink port instance, it should set the devlink port attributes as well. Then the devlink core is able to obtain physical port name itself, no need for driver to implement the ndo. Once all drivers will implement devlink port registration, this ndo should be removed. This warning guides new drivers to do things as they should be done. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since each non-legacy slave has its own devlink port instance correctly set, rely on devlink core to generate correct phys port name. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
In order for devlink compat functions to work, implement ndo_get_devlink_port. Legacy slaves does not have devlink port instances created for themselves. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Now it is unused, remove it. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Introduce devlink_compat_phys_port_name_get() helper that gets the physical port name for specified netdevice according to devlink port attributes. Call this helper from dev_get_phys_port_name() in case ndo_get_phys_port_name is not defined. Signed-off-by: NJiri Pirko <jiri@mellanox.com> Reviewed-by: NJakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 3月, 2019 8 次提交
-
-
由 Eric Dumazet 提交于
According to Amit Klein and Benny Pinkas, IP ID generation is too weak and might be used by attackers. Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix()) having 64bit key and Jenkins hash is risky. It is time to switch to siphash and its 128bit keys. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NAmit Klein <aksecurity@gmail.com> Reported-by: NBenny Pinkas <benny@pinkas.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
My recent patch had at least three problems : 1) TX zerocopy wants notification when skb is acknowledged, thus we need to call skb_zcopy_clear() if the skb is cached into sk->sk_tx_skb_cache 2) Some applications might expect precise EPOLLOUT notifications, so we need to update sk->sk_wmem_queued and call sk_mem_uncharge() from sk_wmem_free_skb() in all cases. The SOCK_QUEUE_SHRUNK flag must also be set. 3) Reuse of saved skb should have used skb_cloned() instead of simply checking if the fast clone has been freed. Fixes: 472c2e07 ("tcp: add one skb cache for tx") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: NSoheil Hassas Yeganeh <soheil@google.com> Tested-by: NHolger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Numan Siddique 提交于
This patch adds a new action - 'check_pkt_len' which checks the packet length and executes a set of actions if the packet length is greater than the specified length or executes another set of actions if the packet length is lesser or equal to. This action takes below nlattrs * OVS_CHECK_PKT_LEN_ATTR_PKT_LEN - 'pkt_len' to check for * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_GREATER - Nested actions to apply if the packet length is greater than the specified 'pkt_len' * OVS_CHECK_PKT_LEN_ATTR_ACTIONS_IF_LESS_EQUAL - Nested actions to apply if the packet length is lesser or equal to the specified 'pkt_len'. The main use case for adding this action is to solve the packet drops because of MTU mismatch in OVN virtual networking solution. When a VM (which belongs to a logical switch of OVN) sends a packet destined to go via the gateway router and if the nic which provides external connectivity, has a lesser MTU, OVS drops the packet if the packet length is greater than this MTU. With the help of this action, OVN will check the packet length and if it is greater than the MTU size, it will generate an ICMP packet (type 3, code 4) and includes the next hop mtu in it so that the sender can fragment the packets. Reported-at: https://mail.openvswitch.org/pipermail/ovs-discuss/2018-July/047039.htmlSuggested-by: NBen Pfaff <blp@ovn.org> Signed-off-by: NNuman Siddique <nusiddiq@redhat.com> CC: Gregory Rose <gvrose8192@gmail.com> CC: Pravin B Shelar <pshelar@ovn.org> Acked-by: NPravin B Shelar <pshelar@ovn.org> Tested-by: NGreg Rose <gvrose8192@gmail.com> Reviewed-by: NGreg Rose <gvrose8192@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Heiner Kallweit 提交于
This adds support for Fast Link Down as new PHY tunable. Fast Link Down reduces the time until a link down event is reported for 1000BaseT. According to the standard it's 750ms what is too long for several use cases. v2: - add comment describing the constants Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com> Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NMichal Kubecek <mkubecek@suse.cz> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart Van Assche 提交于
Instead of declaring a function in a .c file, declare it in a header file and include that header file from the source files that define and that use the function. That allows the compiler to verify consistency of declaration and definition. See also commit 52267790 ("sock: add MSG_ZEROCOPY") # v4.14. Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart Van Assche 提交于
This patch avoids that the following warnings are reported when building with W=1: net/core/rtnetlink.c:3580: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3580: warning: Function parameter or member 'flags' not described in 'ndo_dflt_fdb_add' net/core/rtnetlink.c:3718: warning: Function parameter or member 'ndm' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'tb' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'dev' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'addr' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3718: warning: Function parameter or member 'vid' not described in 'ndo_dflt_fdb_del' net/core/rtnetlink.c:3861: warning: Function parameter or member 'skb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'cb' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'filter_dev' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Function parameter or member 'idx' not described in 'ndo_dflt_fdb_dump' net/core/rtnetlink.c:3861: warning: Excess function parameter 'nlh' description in 'ndo_dflt_fdb_dump' Cc: Hubert Sokolowski <hubert.sokolowski@intel.com> Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart Van Assche 提交于
This patch avoids that the following warning is reported when building with W=1: warning: Function parameter or member 'flags' not described in '__skb_flow_dissect' Cc: Tom Herbert <tom@herbertland.com> Fixes: cd79a238 ("flow_dissector: Add flags argument to skb_flow_dissector functions") # v4.3. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bart Van Assche 提交于
This patch avoids that the following warnings are reported when building with W=1: net/core/dev_ioctl.c:378: warning: Function parameter or member 'ifr' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Function parameter or member 'need_copyout' not described in 'dev_ioctl' net/core/dev_ioctl.c:378: warning: Excess function parameter 'arg' description in 'dev_ioctl' Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 44c02a2c ("dev_ioctl(): move copyin/copyout to callers") # v4.16. Signed-off-by: NBart Van Assche <bvanassche@acm.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-