Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 18 10月, 2018 3 次提交
    • D
      perf annotate: Add Sparc support · 0ab41886
      由 David Miller 提交于 
      E.g.:

  $ perf annotate --stdio2
  Samples: 7K of event 'cycles:ppp', 4000 Hz, Event count (approx.): 3086733887
  __gettimeofday  /lib32/libc-2.27.so [Percent: local period]
  Percent│
         │
         │
         │    Disassembly of section .text:
         │
         │    000a6fa0 <__gettimeofday@@GLIBC_2.0>:
    0.47 │      save   %sp, -96, %sp
    0.73 │      sethi  %hi(0xe9000), %l7
         │    → call   __frame_state_for@@GLIBC_2.0+0x480
    0.30 │      add    %l7, 0x58, %l7     ! e9058 <nftw64@@GLIBC_2.3.3+0x818>
    1.33 │      mov    %i0, %o0
         │      mov    %i1, %o1
    0.43 │      mov    0x74, %g1
         │      ta     0x10
   88.92 │    ↓ bcc    30
    2.95 │      clr    %g1
         │      neg    %o0
         │      mov    1, %g1
    0.31 │30:   cmp    %g1, 0
         │      bne,pn %icc, a6fe4 <__gettimeofday@@GLIBC_2.0+0x44>
         │      mov    %o0, %i0
    1.96 │    ← return %i7 + 8
    2.62 │      nop
         │      sethi  %hi(0), %g1
         │      neg    %o0, %g2
         │      add    %g1, 0x160, %g1
         │      ld     [ %l7 + %g1 ], %g1
         │      st     %g2, [ %g7 + %g1 ]
         │    ← return %i7 + 8
         │      mov    -1, %o0
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20181016.205555.1070918198627611771.davem@davemloft.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0ab41886
    • A
      perf record: Encode -k clockid frequency into Perf trace · cf790516
      由 Alexey Budankov 提交于 
      Store -k clockid frequency into Perf trace to enable timestamps
derived metrics conversion into wall clock time on reporting stage.

Below is the example of perf report output:

  tools/perf/perf record -k raw -- ../../matrix/linux/matrix.gcc
  ...
  [ perf record: Captured and wrote 31.222 MB perf.data (818054 samples) ]

  tools/perf/perf report --header
  # ========
  ...
  # event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|PERIOD, disabled = 1, inherit = 1, mmap = 1, comm = 1, freq = 1, enable_on_exec = 1, task = 1, precise_ip = 3, sample_id_all = 1, exclude_guest = 1, mmap2 = 1, comm_exec = 1, use_clockid = 1, clockid = 4
  ...
  # clockid frequency: 1000 MHz
  ...
  # ========
Signed-off-by: NAlexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/23a4a1dc-b160-85a0-347d-40a2ed6d007b@linux.intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      cf790516
    • A
      perf tools: Stop fallbacking to kallsyms for vdso symbols lookup · edeb0c90
      由 Arnaldo Carvalho de Melo 提交于 
      David reports that:

<quote>
Perf has this hack where it uses the kernel symbol map as a backup when
a symbol can't be found in the user's symbol table(s).

This causes problems because the tests driving this code path use
machine__kernel_ip(), and that is completely meaningless on Sparc.  On
sparc64 the kernel and user live in physically separate virtual address
spaces, rather than a shared one.  And the kernel lives at a virtual
address that overlaps common userspace addresses.  So this test passes
almost all the time when a user symbol lookup fails.

The consequence of this is that, if the unfound user virtual address in
the sample doesn't match up to a kernel symbol either, we trigger things
like this code in builtin-top.c:

	if (al.sym == NULL && al.map != NULL) {
		const char *msg = "Kernel samples will not be resolved.\n";
		/*
		 * As we do lazy loading of symtabs we only will know if the
		 * specified vmlinux file is invalid when we actually have a
		 * hit in kernel space and then try to load it. So if we get
		 * here and there are _no_ symbols in the DSO backing the
		 * kernel map, bail out.
		 *
		 * We may never get here, for instance, if we use -K/
		 * --hide-kernel-symbols, even if the user specifies an
		 * invalid --vmlinux ;-)
		 */
		if (!machine->kptr_restrict_warned && !top->vmlinux_warned &&
		    __map__is_kernel(al.map) && map__has_symbols(al.map)) {
			if (symbol_conf.vmlinux_name) {
				char serr[256];
				dso__strerror_load(al.map->dso, serr, sizeof(serr));
				ui__warning("The %s file can't be used: %s\n%s",
					    symbol_conf.vmlinux_name, serr, msg);
			} else {
				ui__warning("A vmlinux file was not found.\n%s",
					    msg);
			}

			if (use_browser <= 0)
				sleep(5);
			top->vmlinux_warned = true;
		}
	}

When I fire up a compilation on sparc, this triggers immediately.

I'm trying to figure out what the "backup to kernel map" code is
accomplishing.

I see some language in the current code and in the changes that have
happened in this area talking about vdso.  Does that really happen?

The vdso is mapped into userspace virtual addresses, not kernel ones.

More history.  This didn't cause problems on sparc some time ago,
because the kernel IP check used to be "ip < 0" :-) Sparc kernel
addresses are not negative.  But now with machine__kernel_ip(), which
works using the symbol table determined kernel address range, it does
trigger.

What it all boils down to is that on architectures like sparc,
machine__kernel_ip() should always return false in this scenerio, and
therefore this kind of logic:

		if (cpumode == PERF_RECORD_MISC_USER && machine &&
		    mg != &machine->kmaps &&
		    machine__kernel_ip(machine, al->addr)) {

is basically invalid.  PERF_RECORD_MISC_USER implies no kernel address
can possibly match for the sample/event in question (no matter how
hard you try!) :-)
</>

So, I thought something had changed and in the past we would somehow
find that address in the kallsyms, but I couldn't find anything to back
that up, the patch introducing this is over a decade old, lots of things
changed, so I was just thinking I was missing something.

I tried a gtod busy loop to generate vdso activity and added a 'perf
probe' at that branch, on x86_64 to see if it ever gets hit:

Made thread__find_map() noinline, as 'perf probe' in lines of inline
functions seems to not be working, only at function start. (Masami?)

  # perf probe -x ~/bin/perf -L thread__find_map:57
  <thread__find_map@/home/acme/git/perf/tools/perf/util/event.c:57>
     57                 if (cpumode == PERF_RECORD_MISC_USER && machine &&
     58                     mg != &machine->kmaps &&
     59                     machine__kernel_ip(machine, al->addr)) {
     60                         mg = &machine->kmaps;
     61                         load_map = true;
     62                         goto try_again;
                        }
                } else {
                        /*
                         * Kernel maps might be changed when loading
                         * symbols so loading
                         * must be done prior to using kernel maps.
                         */
     69                 if (load_map)
     70                         map__load(al->map);
     71                 al->addr = al->map->map_ip(al->map, al->addr);

  # perf probe -x ~/bin/perf thread__find_map:60
  Added new event:
    probe_perf:thread__find_map (on thread__find_map:60 in /home/acme/bin/perf)

  You can now use it in all perf tools, such as:

	perf record -e probe_perf:thread__find_map -aR sleep 1

  #

  Then used this to see if, system wide, those probe points were being hit:

  # perf trace -e *perf:thread*/max-stack=8/
  ^C[root@jouet ~]#

  No hits when running 'perf top' and:

  # cat gtod.c
  #include <sys/time.h>

  int main(void)
  {
	struct timeval tv;

	while (1)
		gettimeofday(&tv, 0);

	return 0;
  }
  [root@jouet c]# ./gtod
  ^C

  Pressed 'P' in 'perf top' and the [vdso] samples are there:

  62.84%  [vdso]                    [.] __vdso_gettimeofday
   8.13%  gtod                      [.] main
   7.51%  [vdso]                    [.] 0x0000000000000914
   5.78%  [vdso]                    [.] 0x0000000000000917
   5.43%  gtod                      [.] _init
   2.71%  [vdso]                    [.] 0x000000000000092d
   0.35%  [kernel]                  [k] native_io_delay
   0.33%  libc-2.26.so              [.] __memmove_avx_unaligned_erms
   0.20%  [vdso]                    [.] 0x000000000000091d
   0.17%  [i2c_i801]                [k] i801_access
   0.06%  firefox                   [.] free
   0.06%  libglib-2.0.so.0.5400.3   [.] g_source_iter_next
   0.05%  [vdso]                    [.] 0x0000000000000919
   0.05%  libpthread-2.26.so        [.] __pthread_mutex_lock
   0.05%  libpixman-1.so.0.34.0     [.] 0x000000000006d3a7
   0.04%  [kernel]                  [k] entry_SYSCALL_64_trampoline
   0.04%  libxul.so                 [.] style::dom_apis::query_selector_slow
   0.04%  [kernel]                  [k] module_get_kallsym
   0.04%  firefox                   [.] malloc
   0.04%  [vdso]                    [.] 0x0000000000000910

  I added a 'perf probe' to thread__find_map:69, and that surely got tons
  of hits, i.e. for every map found, just to make sure the 'perf probe'
  command was really working.

  In the process I noticed a bug, we're only have records for '[vdso]' for
  pre-existing commands, i.e. ones that are running when we start 'perf top',
  when we will generate the PERF_RECORD_MMAP by looking at /perf/PID/maps.

  I.e. like this, for preexisting processes with a vdso map, again,
  tracing for all the system, only pre-existing processes get a [vdso] map
  (when having one):

  [root@jouet ~]# perf probe -x ~/bin/perf __machine__addnew_vdso
  Added new event:
  probe_perf:__machine__addnew_vdso (on __machine__addnew_vdso in /home/acme/bin/perf)

  You can now use it in all perf tools, such as:

	perf record -e probe_perf:__machine__addnew_vdso -aR sleep 1

  [root@jouet ~]# perf trace -e probe_perf:__machine__addnew_vdso/max-stack=8/
     0.000 probe_perf:__machine__addnew_vdso:(568eb3)
                                       __machine__addnew_vdso (/home/acme/bin/perf)
                                       map__new (/home/acme/bin/perf)
                                       machine__process_mmap2_event (/home/acme/bin/perf)
                                       machine__process_event (/home/acme/bin/perf)
                                       perf_event__process (/home/acme/bin/perf)
                                       perf_tool__process_synth_event (/home/acme/bin/perf)
                                       perf_event__synthesize_mmap_events (/home/acme/bin/perf)
                                       __event__synthesize_thread (/home/acme/bin/perf)

The kernel is generating a PERF_RECORD_MMAP for vDSOs, but somehow
'perf top' is not getting those records while 'perf record' is:

  # perf record ~acme/c/gtod
  ^C[ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.076 MB perf.data (1499 samples) ]

  # perf report -D | grep PERF_RECORD_MMAP2
  71293612401913 0x11b48 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x400000(0x1000) @ 0 fd:02 1137 541179306]: r-xp /home/acme/c/gtod
  71293612419012 0x11be0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a2783000(0x227000) @ 0 fd:00 3146370 854107250]: r-xp /usr/lib64/ld-2.26.so
  71293612432110 0x11c50 [0x60]: PERF_RECORD_MMAP2 25484/25484: [0x7ffcdb53a000(0x2000) @ 0 00:00 0 0]: r-xp [vdso]
  71293612509944 0x11cb0 [0x70]: PERF_RECORD_MMAP2 25484/25484: [0x7fa4a23cd000(0x3b6000) @ 0 fd:00 3149723 262067164]: r-xp /usr/lib64/libc-2.26.so
  #
  # perf script | grep vdso | head
      gtod 25484 71293.612768: 2485554 cycles:ppp:  7ffcdb53a914 [unknown] ([vdso])
      gtod 25484 71293.613576: 2149343 cycles:ppp:  7ffcdb53a917 [unknown] ([vdso])
      gtod 25484 71293.614274: 1814652 cycles:ppp:  7ffcdb53aca8 __vdso_gettimeofday+0x98 ([vdso])
      gtod 25484 71293.614862: 1669070 cycles:ppp:  7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
      gtod 25484 71293.615404: 1451589 cycles:ppp:  7ffcdb53acc5 __vdso_gettimeofday+0xb5 ([vdso])
      gtod 25484 71293.615999: 1269941 cycles:ppp:  7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
      gtod 25484 71293.616405: 1177946 cycles:ppp:  7ffcdb53a914 [unknown] ([vdso])
      gtod 25484 71293.616775: 1121290 cycles:ppp:  7ffcdb53ac47 __vdso_gettimeofday+0x37 ([vdso])
      gtod 25484 71293.617150: 1037721 cycles:ppp:  7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
      gtod 25484 71293.617478:  994526 cycles:ppp:  7ffcdb53ace6 __vdso_gettimeofday+0xd6 ([vdso])
  #

The patch is the obvious one and with it we also continue to resolve
vdso symbols for pre-existing processes in 'perf top' and for all
processes in 'perf record' + 'perf report/script'.
Suggested-by: NDavid Miller <davem@davemloft.net>
Acked-by: NDavid Miller <davem@davemloft.net>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-cs7skq9pp0kjypiju6o7trse@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      edeb0c90
  3. 17 10月, 2018 1 次提交
    • M
      perf report: Don't crash on invalid inline debug information · d4046e8e
      由 Milian Wolff 提交于 
      When the function name for an inline frame is invalid, we must not try
to demangle this symbol, otherwise we crash with:

  #0  0x0000555555895c01 in bfd_demangle ()
  #1  0x0000555555823262 in demangle_sym (dso=0x555555d92b90, elf_name=0x0, kmodule=0) at util/symbol-elf.c:215
  #2  dso__demangle_sym (dso=dso@entry=0x555555d92b90, kmodule=<optimized out>, kmodule@entry=0, elf_name=elf_name@entry=0x0) at util/symbol-elf.c:400
  #3  0x00005555557fef4b in new_inline_sym (funcname=0x0, base_sym=0x555555d92b90, dso=0x555555d92b90) at util/srcline.c:89
  #4  inline_list__append_dso_a2l (dso=dso@entry=0x555555c7bb00, node=node@entry=0x555555e31810, sym=sym@entry=0x555555d92b90) at util/srcline.c:264
  #5  0x00005555557ff27f in addr2line (dso_name=dso_name@entry=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf", addr=addr@entry=2888, file=file@entry=0x0,
      line=line@entry=0x0, dso=dso@entry=0x555555c7bb00, unwind_inlines=unwind_inlines@entry=true, node=0x555555e31810, sym=0x555555d92b90) at util/srcline.c:313
  #6  0x00005555557ffe7c in addr2inlines (sym=0x555555d92b90, dso=0x555555c7bb00, addr=2888, dso_name=0x555555d92430 "/home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf")
      at util/srcline.c:358

So instead handle the case where we get invalid function names for
inlined frames and use a fallback '??' function name instead.

While this crash was originally reported by Hadrien for rust code, I can
now also reproduce it with trivial C++ code. Indeed, it seems like
libbfd fails to interpret the debug information for the inline frame
symbol name:

  $ addr2line -e /home/milian/.debug/.build-id/f7/186d14bb94f3c6161c010926da66033d24fce5/elf -if b48
  main
  /usr/include/c++/8.2.1/complex:610
  ??
  /usr/include/c++/8.2.1/complex:618
  ??
  /usr/include/c++/8.2.1/complex:675
  ??
  /usr/include/c++/8.2.1/complex:685
  main
  /home/milian/projects/kdab/rnd/hotspot/tests/test-clients/cpp-inlining/main.cpp:39

I've reported this bug upstream and also attached a patch there which
should fix this issue:

https://sourceware.org/bugzilla/show_bug.cgi?id=23715Reported-by: NHadrien Grasland <grasland@lal.in2p3.fr>
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: a64489c5 ("perf report: Find the inline stack for a given address")
[ The above 'Fixes:' cset is where originally the problem was
  introduced, i.e.  using a2l->funcname without checking if it is NULL,
  but this current patch fixes the current codebase, i.e. multiple csets
  were applied after a64489c5 before the problem was reported by Hadrien ]
Link: http://lkml.kernel.org/r/20180926135207.30263-3-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d4046e8e
  5. 16 10月, 2018 2 次提交
  7. 09 10月, 2018 10 次提交
  9. 05 10月, 2018 2 次提交
    • M
      perf record: Use unmapped IP for inline callchain cursors · 7a8a8fcf
      由 Milian Wolff 提交于 
      Only use the mapped IP to find inline frames, but keep using the
unmapped IP for the callchain cursor. This ensures we properly show the
unmapped IP when displaying a frame we received via the
dso__parse_addr_inlines API for a module which does not contain
sufficient debug symbols to show the srcline.

This is another follow-up to commit 19610184 ("perf script: Show
virtual addresses instead of offsets").
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Fixes: 19610184 ("perf script: Show virtual addresses instead of offsets")
Link: http://lkml.kernel.org/r/20180926135207.30263-2-milian.wolff@kdab.com
Link: http://lkml.kernel.org/r/20181002073949.3297-1-milian.wolff@kdab.com
[ Squashed a fix from Milian for a problem reported by Ravi, fixed up space damage ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      7a8a8fcf
    • A
      perf python: Use -Wno-redundant-decls to build with PYTHON=python3 · 05a2f546
      由 Arnaldo Carvalho de Melo 提交于 
      When building in ClearLinux using 'make PYTHON=python3' with gcc 8.2.1
it fails with:

    GEN      /tmp/build/perf/python/perf.so
  In file included from /usr/include/python3.7m/Python.h:126,
                   from /git/linux/tools/perf/util/python.c:2:
  /usr/include/python3.7m/import.h:58:24: error: redundant redeclaration of ‘_PyImport_AddModuleObject’ [-Werror=redundant-decls]
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *, PyObject *);
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  /usr/include/python3.7m/import.h:47:24: note: previous declaration of ‘_PyImport_AddModuleObject’ was here
   PyAPI_FUNC(PyObject *) _PyImport_AddModuleObject(PyObject *name,
                          ^~~~~~~~~~~~~~~~~~~~~~~~~
  cc1: all warnings being treated as errors
  error: command 'gcc' failed with exit status 1

And indeed there is a redundant declaration in that Python.h file, one
with parameter names and the other without, so just add
-Wno-error=redundant-decls to the python setup instructions.

Now perf builds with gcc in ClearLinux with the following Dockerfile:

  # docker.io/acmel/linux-perf-tools-build-clearlinux:latest
  FROM docker.io/clearlinux:latest
  MAINTAINER Arnaldo Carvalho de Melo <acme@kernel.org>
  RUN swupd update && \
      swupd bundle-add sysadmin-basic-dev
  RUN mkdir -m 777 -p /git /tmp/build/perf /tmp/build/objtool /tmp/build/linux && \
      groupadd -r perfbuilder && \
      useradd -m -r -g perfbuilder perfbuilder && \
      chown -R perfbuilder.perfbuilder /tmp/build/ /git/
  USER perfbuilder
  COPY rx_and_build.sh /
  ENV EXTRA_MAKE_ARGS=PYTHON=python3
  ENTRYPOINT ["/rx_and_build.sh"]

Now to figure out why the build fails with clang, that is present in the
above container as detected by the rx_and_build.sh script:

  clang version 6.0.1 (tags/RELEASE_601/final)
  Target: x86_64-unknown-linux-gnu
  Thread model: posix
  InstalledDir: /usr/sbin
  make: Entering directory '/git/linux/tools/perf'
    BUILD:   Doing 'make -j4' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                      libslang: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]

  Makefile.config:331: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  make[1]: *** [Makefile.perf:206: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/git/linux/tools/perf'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thiago Macieira <thiago.macieira@intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-c3khb9ac86s00qxzjrueomme@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      05a2f546
  11. 28 9月, 2018 1 次提交
    • M
      perf report: Don't try to map ip to invalid map · ff4ce288
      由 Milian Wolff 提交于 
      Fixes a crash when the report encounters an address that could not be
associated with an mmaped region:

  #0  0x00005555557bdc4a in callchain_srcline (ip=<error reading variable: Cannot access memory at address 0x38>, sym=0x0, map=0x0) at util/machine.c:2329
  #1  unwind_entry (entry=entry@entry=0x7fffffff9180, arg=arg@entry=0x7ffff5642498) at util/machine.c:2329
  #2  0x00005555558370af in entry (arg=0x7ffff5642498, cb=0x5555557bdb50 <unwind_entry>, thread=<optimized out>, ip=18446744073709551615) at util/unwind-libunwind-local.c:586
  #3  get_entries (ui=ui@entry=0x7fffffff9620, cb=0x5555557bdb50 <unwind_entry>, arg=0x7ffff5642498, max_stack=<optimized out>) at util/unwind-libunwind-local.c:703
  #4  0x0000555555837192 in _unwind__get_entries (cb=<optimized out>, arg=<optimized out>, thread=<optimized out>, data=<optimized out>, max_stack=<optimized out>) at util/unwind-libunwind-local.c:725
  #5  0x00005555557c310f in thread__resolve_callchain_unwind (max_stack=127, sample=0x7fffffff9830, evsel=0x555555c7b3b0, cursor=0x7ffff5642498, thread=0x555555c7f6f0) at util/machine.c:2351
  #6  thread__resolve_callchain (thread=0x555555c7f6f0, cursor=0x7ffff5642498, evsel=0x555555c7b3b0, sample=0x7fffffff9830, parent=0x7fffffff97b8, root_al=0x7fffffff9750, max_stack=127) at util/machine.c:2378
  #7  0x00005555557ba4ee in sample__resolve_callchain (sample=<optimized out>, cursor=<optimized out>, parent=parent@entry=0x7fffffff97b8, evsel=<optimized out>, al=al@entry=0x7fffffff9750,
      max_stack=<optimized out>) at util/callchain.c:1085
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Tested-by: NSandipan Das <sandipan@linux.ibm.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: 2a9d5050 ("perf script: Show correct offsets for DWARF-based unwinding")
Link: http://lkml.kernel.org/r/20180926135207.30263-1-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ff4ce288
  13. 21 9月, 2018 4 次提交
    • A
      perf intel-pt: Implement decoder flags for trace begin / end · bea63857
      由 Adrian Hunter 提交于 
      Have the Intel PT decoder implement the new Intel PT decoder flags for
trace begin / end.

Previously, the decoder would indicate begin / end by a branch from / to
zero. That hides useful information, in particular when a trace ends
with a call. That happens when using address filters, for example:

  $ perf record -e intel_pt/cyc,mtc_period=0,noretcomp/u --filter='filter main @ /bin/uname ' uname Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.031 MB perf.data ]

Before:

  $ perf script --itrace=cre -Ftime,flags,ip,sym,symoff,addr --ns
   7249.622183310:   tr strt         0 [unknown] =>   401590 main+0x0
   7249.622183311:   call       4015b9 main+0x29 =>        0 [unknown]
   7249.622183711:   tr strt         0 [unknown] =>   4015be main+0x2e
   7249.622183714:   call       4015c8 main+0x38 =>        0 [unknown]
   7249.622247731:   tr strt         0 [unknown] =>   4015cd main+0x3d
   7249.622247760:   call       4015d7 main+0x47 =>        0 [unknown]
   7249.622248340:   tr strt         0 [unknown] =>   4015dc main+0x4c
   7249.622248341:   call       4015e1 main+0x51 =>        0 [unknown]
   7249.622248681:   tr strt         0 [unknown] =>   4015e6 main+0x56
   7249.622248682:   call       4015eb main+0x5b =>        0 [unknown]
   7249.622248970:   tr strt         0 [unknown] =>   4015f0 main+0x60
   7249.622248971:   call       401612 main+0x82 =>        0 [unknown]
   7249.622249757:   tr strt         0 [unknown] =>   401617 main+0x87
   7249.622249770:   call       401847 main+0x2b7 =>        0 [unknown]
   7249.622250606:   tr strt         0 [unknown] =>   40184c main+0x2bc
   7249.622250612:   call       4019bf main+0x42f =>        0 [unknown]
   7249.622256823:   tr strt         0 [unknown] =>   4019c4 main+0x434
   7249.622256863:   call       4019f5 main+0x465 =>        0 [unknown]
   7249.622264217:   tr strt         0 [unknown] =>   4019fa main+0x46a
   7249.622264235:   call       401832 main+0x2a2 =>        0 [unknown]

After:

  $ perf script --itrace=cre -Ftime,flags,ip,sym,symoff,addr --ns
   7249.622183310:   tr strt              0 [unknown] =>   401590 main+0x0
   7249.622183311:   tr end  call    4015b9 main+0x29 =>   401ef0 set_program_name+0x0
   7249.622183711:   tr strt              0 [unknown] =>   4015be main+0x2e
   7249.622183714:   tr end  call    4015c8 main+0x38 =>   4014b0 setlocale@plt+0x0
   7249.622247731:   tr strt              0 [unknown] =>   4015cd main+0x3d
   7249.622247760:   tr end  call    4015d7 main+0x47 =>   4012d0 bindtextdomain@plt+0x0
   7249.622248340:   tr strt              0 [unknown] =>   4015dc main+0x4c
   7249.622248341:   tr end  call    4015e1 main+0x51 =>   4012b0 textdomain@plt+0x0
   7249.622248681:   tr strt              0 [unknown] =>   4015e6 main+0x56
   7249.622248682:   tr end  call    4015eb main+0x5b =>   404340 atexit+0x0
   7249.622248970:   tr strt              0 [unknown] =>   4015f0 main+0x60
   7249.622248971:   tr end  call    401612 main+0x82 =>   401320 getopt_long@plt+0x0
   7249.622249757:   tr strt              0 [unknown] =>   401617 main+0x87
   7249.622249770:   tr end  call    401847 main+0x2b7 =>   401360 uname@plt+0x0
   7249.622250606:   tr strt              0 [unknown] =>   40184c main+0x2bc
   7249.622250612:   tr end  call    4019bf main+0x42f =>   401b10 print_element+0x0
   7249.622256823:   tr strt              0 [unknown] =>   4019c4 main+0x434
   7249.622256863:   tr end  call    4019f5 main+0x465 =>   401340 __overflow@plt+0x0
   7249.622264217:   tr strt              0 [unknown] =>   4019fa main+0x46a
   7249.622264235:   tr end  call    401832 main+0x2a2 =>   401520 exit@plt+0x0
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-7-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bea63857
    • A
      perf intel-pt: Add decoder flags for trace begin / end · c6b5da09
      由 Adrian Hunter 提交于 
      Previously, the decoder would indicate begin / end by a branch from / to
zero. That hides useful information, in particular when a trace ends
with a call. To prepare for remedying that, add Intel PT decoder flags
for trace begin / end and map them to the existing sample flags.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-6-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c6b5da09
    • A
      perf tools: Improve thread_stack__process() for trace begin / end · 2dcde4e1
      由 Adrian Hunter 提交于 
      thread_stack__process() is used to create call paths for database
export.  Improve the handling of trace begin / end to allow for a trace
that ends in a call.

Previously, the Intel PT decoder would indicate begin / end by a branch
from / to zero. That hides useful information, in particular when a
trace ends with a call. Before remedying that, enhance the thread stack
so that it identifies the trace end by the flag instead of by ip == 0.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-5-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2dcde4e1
    • A
      perf tools: Improve thread_stack__event() for trace begin / end · 4d60e5e3
      由 Adrian Hunter 提交于 
      thread_stack__event() is used to create call stacks, by keeping track of
calls and returns. Improve the handling of trace begin / end to allow
for a trace that ends in a call.

Previously, the Intel PT decoder would indicate begin / end by a branch
from / to zero. That hides useful information, in particular when a
trace ends with a call. Before remedying that, enhance the thread stack
so that it does not expect to see the 'return' for a 'call' that ends
the trace.

Committer notes:

Added this:

                return thread_stack__push(thread->ts, ret_addr,
-                                         flags && PERF_IP_FLAG_TRACE_END);
+                                         flags & PERF_IP_FLAG_TRACE_END);

To fix problem spotted by:

debian:9:            clang version 3.8.1-24 (tags/RELEASE_381/final)
debian:experimental: clang version 6.0.1-6 (tags/RELEASE_601/final)
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20180920130048.31432-4-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4d60e5e3
  15. 20 9月, 2018 9 次提交
  17. 19 9月, 2018 8 次提交