Print identifying information about struct device.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Constify the data to write to the Status Register.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

In case the write of the first byte failed, retlen was incorrectly
incremented to *retlen += actual; on the exit path. retlen should be
incremented when actual data was written to the flash.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Drop the error messages from the callers, since the callees
already print an error message in case of failure.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Let the callers pass the pointer to the DMA-able buffer where
the value of the Configuration Register will be written. This way we
avoid the casts between int and u8, which can be confusing.

Callers stop compare the return value of spi_nor_read_cr() with negative,
spi_nor_read_cr() returns 0 on success and -errno otherwise.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Let the callers pass the pointer to the DMA-able buffer where
the value of the Flag Status Register will be written. This way we
avoid the casts between int and u8, which can be confusing.

Caller stops compare the return value of spi_nor_read_fsr() with negative,
spi_nor_read_fsr() returns 0 on success and -errno otherwise.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Let the callers pass the pointer to the DMA-able buffer where
the value of the Status Register will be written. This way we
avoid the casts between int and u8, which can be confusing.

Callers stop compare the return value of spi_nor_read_sr() with negative,
spi_nor_read_sr() returns 0 on success and -errno otherwise.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Do not overwrite the error numbers received the Register Operations
methods.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

ret is already of type int.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

spi_mem_exec_op()
nor->controller_ops->write_reg()
nor->controller_ops->read_reg()
spi_nor_wait_till_ready()
Return 0 on success, -errno otherwise.

Stop compare with negative and compare with zero in all the register
operations methods.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Group all register methods up in the file, to avoid forward
declarations.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Two new lines, one after another, drop one.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

All the core functions should begin with "spi_nor_".
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Move all SPI NOR controller driver specific ops in a dedicated
structure. 'struct spi_nor' becomes lighter.

Use size_t for lengths in 'int (*write_reg)()' and 'int (*read_reg)()'.
Rename wite/read_buf to buf, the name of the functions are
suggestive enough. Constify buf in int (*write_reg). Comply with these
changes in the SPI NOR controller drivers.
Suggested-by: NBoris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>

Tested on HiWiFi C526A

Datasheet is available at:
http://www.xinyahong.com/upLoad/product/month_1411/201411201256018276.pdfSigned-off-by: NDENG Qingfang <dqfext@gmail.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>

write_sr() sends data to the SPI memory, fix the direction.

Fixes: b35b9a10 ("mtd: spi-nor: Move m25p80 code in spi-nor.c")
Reported-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Tested-by: NJohn Garry <john.garry@huawei.com>
Acked-by: NVignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: NMiquel Raynal <miquel.raynal@bootlin.com>

n25q512a was rebranded to mt25qu512a after its spin off from STM.
mt25qu512a is different only in terms of operating frequency, the
JEDEC id is the same as in n25q512a.

Dual reads are supported (0x3b, 0x3c), set the SPI_NOR_DUAL_READ flag.
4-byte opcodes are supported, set the SPI_NOR_4B_OPCODES flag.

Tested Single I/O and QUAD I/O mode on LS1046FRWY.
Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: NAshish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>
[tudor.ambarus@microchip.com: rename entry to "mt25qu512a (n25q512a)",
reword commit message, order entry by size, drop comment as it looked
redundant]
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>

mt35xu02g is an Octal flash supporting Single and OCTAL I/O.
Tested on LS1028ARDB.
Signed-off-by: NKuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: NAshish Kumar <ashish.kumar@nxp.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>
[tudor.ambarus@microchip.com: reword commit message]
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>

We already pass a pointer to nor, we can obtain the sector_size
by dereferencing it.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

This patch adds spi_nor_debugfs_init() for the debugfs initialization.
With this patch, we can read the partname and partid through the
debugfs.

The output of new debugfs nodes on my device are:
cat /sys/kernel/debug/mtd/mtd0/partid
spi-nor:ef6017
cat /sys/kernel/debug/mtd/mtd0/partname
w25q64dw
Signed-off-by: NZhuohao Lee <zhuohao@chromium.org>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>

Dedicate a function for getting the pointer to the flash_info
const struct. Trim a bit the spi_nor_scan() huge function.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

Parsing of flash parameters were interleaved with setting of the
nor addr width. Dedicate a function for setting nor addr width.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

Bring all flash parameters default initialization in
spi_nor_legacy_params_init().
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

S3AN flashes use a specific opcode to read the status register.
We currently use the SPI_S3AN flag to decide whether this specific
SR read opcode should be used, but SPI_S3AN is about to disappear, so
let's add a new flag.

Note that we use the same bit as SPI_S3AN implies SPI_NOR_XSR_RDY and
vice versa.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

s3an_nor_scan() was overriding the opcode selection done in
spi_nor_default_setup(). Set nor->setup() method in order to
avoid the unnecessary call to spi_nor_default_setup().

Now that the call to spi_nor_default_setup() is skipped, set
mtd.erasesize to nor->info->sector_size, as it was when
spi_nor_select_erase() was called.

No dummy byte is required for the S3AN's Random Read command (0x03),
so no need to set nor->read_dummy.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

nor->params.setup() configures the SPI NOR memory. Useful for SPI NOR
flashes that have peculiarities to the SPI NOR standard, e.g.
different opcodes, specific address calculation, page size, etc.
Right now the only user will be the S3AN chips, but other
manufacturers can implement it if needed.

Move spi_nor_setup() related code in order to avoid a forward
declaration to spi_nor_default_setup().
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

In order to separate manufacturer quirks from the core we need to get
rid of all the manufacturer specific flags, like the
SNOR_F_S3AN_ADDR_DEFAULT one.

This can easily be replaced by a ->convert_addr() hook, which when
implemented will provide the core with an easy way to convert an
absolute address into something the flash understands.

Right now the only user are the S3AN chips, but other manufacturers
can implement it if needed.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

Add a spansion_post_sfdp_fixups() function to fix the erase opcode,
erase sector size and set the SNOR_F_4B_OPCODES flag.
This way, all spansion related quirks are placed in the
spansion_post_sfdp_fixups() function.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

SFDP tables are sometimes wrong and we need a way to override the
config chosen by the SFDP parsing logic without discarding all of it.

Add a new hook called after the SFDP parsing has taken place to deal
with such problems.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

Add the SNOR_F_HAS_LOCK flag and set it when SPI_NOR_HAS_LOCK is set
in the flash_info entry or when it's a Micron or ST flash.

Move the locking hooks in a separate struct so that we have just
one field to update when we change the locking implementation.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
[tudor.ambarus@microchip.com: use ->default_init() hook, introduce
spi_nor_late_init_params(), set ops in nor->params]
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

The procedure used to enable 4 byte addressing mode depends on the NOR
device, so let's provide a hook so that manufacturer specific handling
can be implemented in a sane way.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
[tudor.ambarus@microchip.com: use nor->params.set_4byte() instead of
nor->set_4byte()]
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

Add functions to delimit what the chunks of code do:

static void spi_nor_init_params()
{
	spi_nor_info_init_params()
	spi_nor_manufacturer_init_params()
	spi_nor_sfdp_init_params()
}

Add descriptions to all methods.

spi_nor_init_params() becomes of type void, as all its children
return void.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

The goal is to move the quad_enable manufacturer specific init in the
nor->manufacturer->fixups->default_init()

The legacy quad_enable() implementation is spansion_quad_enable(),
select this method by default.

Set specific manufacturer fixups->default_init() hooks to overwrite
the default quad_enable() implementation when needed.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

gd25q256 needs to tweak the ->quad_enable() implementation and the
->default_init() fixup hook is the perfect place to do that. This way,
if we ever need to tweak more things for this flash, we won't have to
add new fields in flash_info.

We can get rid of the flash_info->quad_enable field as gd25q256 was
the only user.
Signed-off-by: NBoris Brezillon <boris.brezillon@bootlin.com>
[tudor.ambarus@microchip.com: use ->default_init() hook instead of
->post_sfdp()]
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

As of now, the flash parameters initialization logic is as following:

a/ default flash parameters init in spi_nor_init_params()
b/ manufacturer specific flash parameters updates, split across entire
   spi-nor core code
c/ flash parameters updates based on SFDP tables
d/ post BFPT flash parameter updates

In the quest of removing the manufacturer specific code from the spi-nor
core, we want to impose a timeline/priority on how the flash parameters
are updated. The following sequence of calls is pursued:

1/ spi-nor core parameters init based on 'flash_info' struct:
	spi_nor_info_init_params()

which can be overwritten by:
2/ MFR-based manufacturer flash parameters init:
	nor->manufacturer->fixups->default_init()

which can be overwritten by:
3/ specific flash_info tweeks done when decisions can not be done just on
   MFR:
	nor->info->fixups->default_init()

which can be overwritten by:
4/ SFDP tables flash parameters init - SFDP knows better:
	spi_nor_sfdp_init_params()

which can be overwritten by:
5/ post SFDP tables flash parameters updates - in case manufacturers get
   the serial flash tables wrong or incomplete.
	nor->info->fixups->post_sfdp()
   The later can be extended to nor->manufacturer->fixups->post_sfdp() if
   needed.

This patch opens doors for steps 2/ and 3/.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

All flash parameters and settings should reside inside
'struct spi_nor_flash_parameter'. Move the SMPT parsed erase map
from 'struct spi_nor' to 'struct spi_nor_flash_parameter'.

Please note that there is a roll-back mechanism for the flash
parameter and settings, for cases when SFDP parser fails. The SFDP
parser receives a Stack allocated copy of nor->params, called
sfdp_params, and uses it to retrieve the serial flash discoverable
parameters. JESD216 SFDP is a standard and has a higher priority
than the default initialized flash parameters, so will overwrite the
sfdp_params data when needed. All SFDP code uses the local copy of
nor->params, that will overwrite it in the end, if the parser succeds.

Saving and restoring the nor->params.erase_map is no longer needed,
since the SFDP code does not touch it.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

All flash parameters and settings should reside inside
'struct spi_nor_flash_parameter'. Drop the local copy of
quad_enable() and use the one from 'struct spi_nor_flash_parameter'.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

The Flash parameters and settings are now stored in 'struct spi_nor'.
Use this instead of the stack allocated params.

Few functions stop passing pointer to params, as they can get it from
'struct spi_nor'. spi_nor_parse_sfdp() and children will keep passing
pointer to params because of the roll-back mechanism: in case the
parsing of SFDP fails, the legacy flash parameter and settings will be
restored.

Zeroing params is no longer needed because all SPI NOR users kzalloc
'struct spi_nor'.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

The scope is to move all [FLASH-SPECIFIC] parameters and settings
from 'struct spi_nor' to 'struct spi_nor_flash_parameter'.

'struct spi_nor_flash_parameter' describes the hardware capabilities
and associated settings of the SPI NOR flash memory. It includes
legacy flash parameters and settings that can be overwritten by the
spi_nor_fixups hooks, or dynamically when parsing the JESD216
Serial Flash Discoverable Parameters (SFDP) tables. All SFDP params
and settings will fit inside 'struct spi_nor_flash_parameter'.

Move spi_nor_hwcaps related code to avoid forward declarations.
Add a forward declaration that we can't avoid: 'struct spi_nor' will
be used in 'struct spi_nor_flash_parameter'.
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: NVignesh Raghavendra <vigneshr@ti.com>

In spi_nor_parse_4bait(), 'dwords' is allocated through kmalloc(). However,
it is not deallocated in the following execution if spi_nor_read_sfdp()
fails, leading to a memory leak. To fix this issue, free 'dwords' before
returning the error.

Fixes: 816873ea ("mtd: spi-nor: parse SFDP 4-byte Address Instruction Table")
Signed-off-by: NWenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: NTudor Ambarus <tudor.ambarus@microchip.com>