- 29 6月, 2016 40 次提交
-
-
由 Peter Ujfalusi 提交于
On some boards, like omap5-uevm the MCLK is gated by default and in order to be able to use the High performance modes of twl6040 it need to be enabled by SW. Add support for handling the MCLK source clock via CCF. At the same time lower the print priority of the notification that the 32K clock is not provided and it is not going to be handled by the driver. Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Michael Brunner 提交于
This is an unmodified resend of the patch already been sent on February 17 as it seems to have fallen through the net. This patch adds the DMI system ID of the Kontron COMe-cSL6 and COME-mAL10 boards to the Kontron PLD driver. The list of supported products in the module description is also updated. Signed-off-by: NMichael Brunner <michael.brunner@kontron.com> Acked-by: NChristian Rauch <christian.rauch@kontron.com> Acked-by: NGuenter Roeck <linux@roeck-us.net> Reviewed-by: NDarren Hart <dvhart@linux.intel.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Wei Yongjun 提交于
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Also remove unneeded error handling of platform_get_resource(). Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Markus Elfring 提交于
This issue was detected by using the Coccinelle software. Return directly if a call of the function "devm_regmap_init_i2c" or "regmap_write" failed. Delete the jump label "err" then. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Markus Elfring 提交于
The variable "ret" will be set to an appropriate value a bit later. Thus omit the explicit initialisation at the beginning. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Markus Elfring 提交于
The platform_device_put() function was called in one case by the add_child() function during error handling even if the passed variable "pdev" contained a null pointer. Return directly in this case. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Markus Elfring 提交于
Adjust jump targets according to the Linux coding style convention. Another check for the variable "status" can be omitted then at the end. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Markus Elfring 提交于
The platform_device_put() function was called in one case by the add_numbered_child() function during error handling even if the passed variable "pdev" contained a null pointer. Return directly in this case. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Charles Keepax 提交于
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Linus Walleij 提交于
The STMPE platform data is only populated from the device tree in all existing users, so push the struct and make the OF case the norm. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Javier Martinez Canillas 提交于
The driver's Kconfig symbol is a boolean but nothing prevents the driver to be built as a module instead of built-in. It is true that most system integrators will choose the latter but the config should not restrict it. Suggested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Javier Martinez Canillas 提交于
The driver's init function is called at subsys init call level but the dependencies provided by the driver are looked up by drivers that have probe deferral support, so manual ordering of init calls isn't needed. Suggested-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Charles Keepax 提交于
Some duplicate defines seem to have snuck into the registers file, this patch simply removes them. Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Linus Walleij 提交于
This define RPM_SIGNAL probably pertains to the IPC signal which we ended up fetching from the device tree instead. the define is unused, remove it. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NStephen Boyd <sboyd@codeaurora.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 John Stultz 提交于
Wire up the powerkey driver functionality for the hi655x PMIC. Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 John Stultz 提交于
Currently the hi655x-pmic driver has names for interrupt mask values, but not for the interrupt numbers themselves. So to allow for interrupt numbers to have sane names, rename the mask values with the _MASK postfix and use the existing names as the interrupt name Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 John Stultz 提交于
While trying to get the powerkey to function, I found when pressing the key, I would get infinitely repeating interrupts. After digging around a bit, it seems we didn't set the ack_base value for the regmap irqchip logic, so nothing was acking the interrupt. This patch adds the ack_base, which seems to make things work. Signed-off-by: NJohn Stultz <john.stultz@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Richard Fitzgerald 提交于
Previously the arizona_irq_thread implementation would call handle_nested_irqs() to handle AOD interrupts without checking if any were actually pending. The kernel will see these as spurious IRQs and will eventually disable the IRQ. This patch ensures we only launch the nested handler if there are AOD interrupts pending in the codec. Signed-off-by: NSimon Trimmer <simont@opensource.wolfsonmicro.com> Signed-off-by: NRichard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Linus Walleij 提交于
The RPM in MSM8660/APQ8060 has different offsets to the selector ACK and request context ACK registers. Make all these register offsets part of the per-SoC data and assign the right values. The bug was found by verifying backwards to the vendor tree in the out-of-tree files <mach/rpm-[8660|8064|8960]>: all were using offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060 which was using offsets 3,11,19,27 and a select size of 7. All other platforms apart from msm8660 were affected by reading excess registers, since 7 was hardcoded as the number of select words, this patch makes also this part dynamic so we only write/read as many select words as the platform actually use. Symptoms of this bug when using msm8660: the first RPM transaction would work, but the next would stall or raise an error since the previous transaction was not properly ACKed as the ACK words were read at the wrong offset. Cc: stable@vger.kernel.org Fixes: 58e21438 ("mfd: qcom-rpm: Driver for the Qualcomm RPM") Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NBjörn Andersson <bjorn.andersson@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Andrew F. Davis 提交于
The regmap structure pointer is named regmap_tscadc, this is not consistent with other drivers and is redundant, it also contributes to several checkpatch warnings involving long lines. Rename this. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Andrew F. Davis 提交于
All functions in this driver reference the same ti_tscadc_dev per device but use several different names for this structure pointer, this can be confusing when following the code. Use the name 'tscadc' everywhere. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Laxman Dewangan 提交于
The programming guidelines of the MAX77620 for servicing interrupt is: 1. When interrupt occurs from PMIC, mask the PMIC interrupt by setting GLBLM. 2. Read IRQTOP and service the interrupt. 3. Once all interrupts has been checked and serviced, the interrupt service routine un-masks the hardware interrupt line by clearing GLBLM. Add the pre and post interrupt service handler for mask and unmask the global interrupt mask bit (for step 1 and 3) as callback from regmap-irq. Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Hans de Goede 提交于
Add axp20x-usb-power-supply for axp22x pmics. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Thor Thayer 提交于
Add support for the Altera Arria10 Development Kit System Resource chip which is implemented using a MAX5 as a external gpio extender with the regmap framework over a SPI bus. Signed-off-by: NThor Thayer <tthayer@opensource.altera.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Thor Thayer 提交于
Add maintainer for the Altera Arria10 Max5 System Resource chip files. Signed-off-by: NThor Thayer <tthayer@opensource.altera.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Ben Copeland 提交于
WARNING: please, no spaces at the start of a line + { "tps6507x", 0 },$ WARNING: please, no spaces at the start of a line + { }$ Signed-off-by: NBen Copeland <ben.copeland@linaro.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Andrew F. Davis 提交于
Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Andrew F. Davis 提交于
tscadc_readl and tscadc_writel are single line functions and do not save use anything, remove these. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Andrew F. Davis 提交于
Fix the code formatting to use the kernel preferred style of using the actual variables to determine the size using the sizeof() operator. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Steve Twiss 提交于
Dialog Semiconductor support would like to follow files by adding to the existing MAINTAINERS search terms. The update will allow us to follow files for PMIC documentation bindings and header files. The full list is: DT bindings - Documentation/devicetree/bindings/mfd/da9052-i2c.txt - Documentation/devicetree/bindings/mfd/da9055.txt - Documentation/devicetree/bindings/mfd/da9062.txt - Documentation/devicetree/bindings/mfd/da9063.txt - Documentation/devicetree/bindings/mfd/da9150.txt - Documentation/devicetree/bindings/regulator/da9210.txt - Documentation/devicetree/bindings/regulator/da9211.txt Header files - include/linux/mfd/da9062/core.h - include/linux/mfd/da9062/registers.h - include/linux/regulator/da9211.h Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Ben Dooks 提交于
Fix the warnings about the following functions not being declared by including omap-usb.h which declares them: drivers/mfd/omap-usb-tll.c:333:5: warning: symbol 'omap_tll_init' was not declared. Should it be static? drivers/mfd/omap-usb-tll.c:408:5: warning: symbol 'omap_tll_enable' was not declared. Should it be static? drivers/mfd/omap-usb-tll.c:442:5: warning: symbol 'omap_tll_disable' was not declared. Should it be static? Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Hans de Goede 提交于
The kernel expects the power_off function to not return, and if it does it panics. Add a slight delay after the i2c write which turns off power through the PMIC, to give capacitors etc. some time to drain. Without this the kernel lives on long enough after the poweroff to print the following on the serial console on my Mele A1000G quad: [ 248.583588] reboot: Power down [ 248.600490] Kernel pa With the delay the start of printing "Kernel panic" is gone. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NChen-Yu Tsai <wens@csie.org> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Axel Lin 提交于
These tables are never modified, so declare them as const. Signed-off-by: NAxel Lin <axel.lin@ingics.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Colin Ian King 提交于
trivial fix to spelling mistake in dev_err message Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig: config MFD_MAX8925 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX8925 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX8997 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX8997/8966 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: mfd/Kconfig:config MFD_MAX8998 mfd/Kconfig: bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We delete the include of module.h as well as an unused include of moduleparam.h too. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX77620 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Paul Gortmaker 提交于
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_MAX77843 drivers/mfd/Kconfig: bool "Maxim Semiconductor MAX77843 PMIC Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-
由 Steve Twiss 提交于
Dialog Semiconductor support would like to follow files by adding to the existing MAINTAINERS search terms. The update will allow us to follow files for PMIC documentation bindings and header files. The full list is: DT bindings - Documentation/devicetree/bindings/mfd/da9052-i2c.txt - Documentation/devicetree/bindings/mfd/da9055.txt - Documentation/devicetree/bindings/mfd/da9062.txt - Documentation/devicetree/bindings/mfd/da9063.txt Header files - include/linux/mfd/da9062/core.h - include/linux/mfd/da9062/registers.h Signed-off-by: NSteve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: NLee Jones <lee.jones@linaro.org>
-